均三嗪基修饰的1，3，4-噁二唑类化合物的合成

1，3，4-噁二唑类材料具有优良的电子传输性及很好的耐热性和抗氧化性，是目前应用最广泛的电子传输材料。然而由于小分子化合物性质不稳定，尤其是其热稳定性差以及易重结晶，从而影响电致发光器件的使用寿命。本文引入均三嗪基团对其进行化学修饰以改善其电子传输性能和稳定性，合成了几种2-苯基-5-(对氨基苯基)-1，3，4-噁二唑取代的二氯均三嗪及其衍生物。合成路线如下。     

用于电子传输材料的含噻吩环噁二唑衍生物的合成(英文)

在有机电致发光器件研究中,电子传输材料占有特殊重要的地位。但现存的材料存在着不同的缺点。因噁二唑环的高的电子亲和性,噁二唑衍生物是常见的电子传输材料,如:2-(4- 叔丁苯基)-5-联苯基噁二唑(PBD),但容易结晶和低的电子亲和性限制了它的应用。为了得到新的有效的电子传输材料,本文以噻吩为起始反应物经过二碘代、羧酸化、酯化、氨解等步骤合成了噻吩二酰肼,再通过噻吩二酰肼与相应的取代苯甲酰氯缩合、关环的方法将富电子的噻吩环和高电子亲和性的噻吩环同时引入,合成了三种新的含噻吩环噁二唑衍生物2,5-双[2,2’-双(5-取代苯基)-1,3,4-噁二唑]噻吩(R-OXD R=H,OCH_3,CH_3)。同时,采用循环伏安法对其电化学性能进行了测定。这三种化合物都在负方向出现了-对可逆的氧化还原峰,由此得到其电子亲和势(EA)分别为-3.10eV,-3.07eV和-3.08eV,其EA值都高于常用的电子传输材料PBD。R-OXD的高电子亲和势有利于电子从阴极注入。并且由时间渡越法(TOF)测得R-OXD的电子迁移率达到10~(-4)cm~2/V.S(E=10~6V/cm)。所以R-OXD有可能是好的电子传输材料。     

基于5-芳基-2-巯基噁二唑辅助配体的双核环金属铂配合物的合成及高效电致红光发光器件

设计合成了一种新型的基于5-芳基-2-巯基噁二唑辅助配体的双核环金属铂配合物（dfppy）2Pt2（C8OXT）2,其中dfppy为2-（4,6-二氟苯基）吡啶,C8OXT为5-苯基-2-巯基-1,3,4-噁二唑桥连配体.系统研究了该双核铂配合物（dfppy）2Pt2（C8OXT）2的热稳定性、光物理、电化学及电致发光性能.以（dfppy）2Pt2（C8OXT）2作为客体掺杂到聚合物主体材料中制备了单发光层聚合物电致发光器件.器件展现了饱和的红光发射,其最大发射峰为620nm.当配合物掺杂浓度为8wt%时,器件性能达到最好.其最高外量子效率为8.4%,最高电流效率为4.2cd/A,最大亮度为3228cd/m2.本研究表明,以5-苯基-2-巯基-1,3,4-噁二唑作为桥连配体的双核铂配合物在聚合物器件中能够实现高效红光发射.     

2-甲基-3-双取代基-4,5-二氢异噁唑衍生物的合成及其拆分

3-(1′,2′-二-O-环己叉二氧乙基)异噁唑啉盐(2)与MeMgBr(或在二异丙基胺和正丁基锂存在下与乙酸乙酯)进行亲核加成反应合成了2,3-二甲基-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(3)[或2-甲基-3-(乙氧羰甲基)-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(4)]。3和4经MPLC拆分得到了非对映体3a,3b,4a和4b,其结构经1HNMR,13C-NMR,IR和元素分析表征。     

2,5-二芳基取代基-1,3,4-噁二唑类衍生物的合成与表征

以双酰肼环合法合成了含1,3,4-噁二唑结构单元的溴代芳卤,然后通过Sonogash ira钯催化偶联作用与不同单取代炔反应合成了3个新的2,5-二取代-1,3,4-噁二唑类小分子衍生物,其结构经DSC,1H NMR,IR和元素分析表征。     

含二苯联噁二唑大环多胺及其配合物的合成

用2,5-双-(间甲酰基苯基)-1,3,4-噁二唑和相应的二胺,经[2 2]缩合环化反应,合成了三个含二苯联噁二唑的新型大环多胺4、5和7以及5的钡络合物。     

新型含吡唑基异噁唑衍生物的合成与表征

以查尔酮4和取代的α-氯代吡唑甲醛肟3为原料,通过1,3-偶极环加成反应得到了16种新型的含吡唑基异噁唑衍生物,方法简单可行.化合物4,5-二氢-3-(1-苯基-3-甲基-5-取代-4-基)-5-芳基-4-芳酰基异噁唑啉(5)的结构经过IR,1HNMR,MS及元素分析确证.并利用单晶X射线衍射法测定了5g晶体结构.     

新型p-/n-掺杂型交替共聚物的合成及其光电性能的研究

本文通过Heck偶联法制备一种新型p-/n-掺杂型电致发光材料--3-十二烷氧基噻吩-共-1,3,4-噁二唑交替聚合物(P3DDOTV-OXD), 用核磁共振（1H NMR）及凝胶色谱（GPC）对结构进行了分析表征。用紫外光谱（Uv-vis）、荧光光谱法及电化学分析法对其光电学性能进行了研究。结果表明：聚合物的重均分子量为：5287,在氯仿溶液中,聚合物的紫外最大吸收波长为314nm,在401nm处发射出明亮的蓝光;较其均聚物（516nm）蓝移了115nm。 循环伏安测定结果表明: P3DDOTV-OXD在正、负向区域分别出现了一对氧化还原峰对,电子亲和能（Ia）为：2.88eV,有利于电子从阴极的注入。3-十二烷氧基噻吩-共-噁二唑交替共聚物实现了集空穴、电子双向传输为一体的高性能的聚合物光电功能材料的性能要求。     

2,5-取代-1,3,4-噁二唑衍生物的合成与杀菌活性

利用生物活性亚结构拼接原理,将吡啶环、噻唑环引入到1,3,4-噁二唑母体结构中,设计并合成了一系列新型含吡啶(噻唑)的1,3,4-噁二唑衍生物.通过IR,1H NMR,EI-MS及元素分析等方法对所合成的化合物进行了结构表征.代表化合物2-(6-氯吡啶-3-甲硫基)-5-(吡啶-4-基)-1,3,4-噁二唑(I)经单晶X衍射证实了结构.初步测定了所合成化合物的杀菌活性,并比较了在1,3,4-噁二唑母体结构中引入噻唑杂环和引入吡啶杂环后其杀菌活性的差异.结果表明:目标化合物对测试的5种菌均具有一定的杀菌活性,对水稻纹枯病的抑制效果普遍优于对其它菌种的抑制效果;在1,3,4-噁二唑母体结构中引入噻唑杂环比引入吡啶杂环对其杀菌活性更有利.     

新型1,3,4-噁二唑衍生物的合成与性质研究

研制高效载流子传输材料是提高有机电致发光器件性能的关键. 采用对酯对二酰氯(5)与含不同链长烷氧取代基的苯甲酰肼(2)缩合制备了一系列腰接羧基1,3,4-噁二唑衍生物, 即1,4-二[5-(4-烷氧基苯)-1,3,4-噁二唑基]-2,5-二羧基苯(7; 烷氧基＝OCnH2n＋1; n＝8, 12, 16), 并采用UV-vis吸收和荧光光谱对合成物进行了表征. 结果表明: 7的分子结构中羧基的横向引入, 对化合物的光物理性质和能带结构产生较大影响. 这些噁二唑化合物的LUMO及HOMO值分别介于－3.62与－3.58 eV之间及－6.94与－6.90 eV之间, 说明它们可能具有良好的电子传输性.     

含噁二唑单元共轭聚合物合成与性质研究

单体 2 ,5 双 (4 溴苯 ) 1,3,4 二唑 (M Ⅰ )与 1,4 二乙烯基 2 ,5 二正丁氧基苯 (M Ⅱ ) ,在钯催化下通过Heck偶合反应合成得到共轭聚合物 ;单体和聚合物进行了1 H NMR ,1 3C NMR、质谱、FT IR、UV、荧光光谱、GPC、元素分析、热分析等测试 ;二唑 (OXD)基团是一种很好的生色团 ,对氧和热特别稳定 ,二唑环的亲电子性能使其特别适合于作为电子传输层 ,聚合物能发射很强的绿色荧光 ,它将是一类潜在的光电高分子材料     

Synthesis and properties of carbon-chain polymers with pendant 1,3,4-oxadiazole rings

Carbon-chain polymers with 1,3,4-oxadiazole rings were prepared by radical polymerization and polymer-analogous transformations. The kinetic relationships of the polymerization of vinyl-1,3,4-oxadiazole monomers and some properties of the resulting polymers were studied. The thermodynamics of interaction of poly-2-vinyl-5-methyl-1,3,4-oxadiazole, a nonionic water-soluble polymer, with water was examined.     

High-efficiency poly(p-phenylenevinylene)-based copolymers containing an oxadiazole pendant group for light-emitting diodes

A new series of high brightness and luminance efficient poly(p-phenylenevinylene) (PPV)-based electroluminescent (EL) polymers, poly[2-[4-[5-(4-(3,7-dimethyloctyloxy)phenyl)-1,3,4-oxadiazole-2-yl]phenyloxy]-1,4-phenylenevinylene] (Oxa-PPV), poly[2-[2-((3,7-dimethyloctyl)oxy)phenoxy]-1,4-phenylenevinylene] (DMOP-PPV), and their corresponding random copolymers, poly[[2-[4-[5-(4-(3,7-dimethyloctyloxy)phenyl)-1,3,4-oxadiazole-2-yl]phenyloxy]-1,4-phenylenevinylene]-co-[2-[2-((3,7-dimethyloctyl)oxy) phenoxy]-1,4-phenylenevinylene]] (Oxa-PPV-co-DMOP-PPV), with an electron-deficient 1,3,4-oxadiazole unit on the side groups, were synthesized through the Gilch polymerization method. The newly designed and synthesized asymmetric molecular structures of Oxa-PPV, DMOP-PPV, and Oxa-PPV-co-DMOP-PPV were completely soluble in common organic solvents, and defect-free optical thin film was easily spin-coated onto the indium tin oxide (ITO) substrate. Oxa-PPV shows a high glass transition temperature (T(g)), which might be an advantage for long time operation of polymer light-emitting diodes (PLEDs). Double-layer LEDs with an ITO/PEDOT/polymer/Al configuration were fabricated by using those polymers. Electrooptical properties and device performance could be adjusted by introducing the Oxa-PPV content in the copolymers. The emission colors could be tuned from green to yellowish-orange via intramolecular energy transfer. The improved device performance of Oxa-PPV over DMOP-PPV and Oxa-PPV-co-DMOP-PPV may be due to better electron injection and charge balance between holes and electrons and also efficient intramolecular energy transfer from 1,3,4-oxadiazole units to PPV backbones. The maximum brightness and the luminance efficiency of Oxa-PPV were up to 19395 cd/m(2) at 14 V and 21.1 cd/A at 5930 cd/m(2). The maximum luminance efficiency of Oxa-PPV is ranked the highest value among the PPV derivatives to date.     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

Synthesis of poly(1,3,4-oxadiazole)s by direct polycondensation of dicarboxylic acids with hydrazine sulfate using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(1,3,4-oxadiazole)s of high molecular weights has been developed. These polymers were prepared readily by the direct polycondensation of dicarboxylic acids with hydrazine sulfate ( 1 ) using phosphorus pentoxide/methanesulfonic acid (PPMA) as both a condensing agent and solvent. Polycondensation of aliphatic dicarboxylic acids with 1 proceeded even at room temperature and produced poly(1,3,4-oxadiazole)s with inherent viscosities up to 1.4 dL/g. The synthesis of aromatic poly(1,3,4-oxadiazole)s from aromatic dicarboxylic acids containing phenyl ether structures was carried out by a one-pot procedure because the preactivation of dicarboxylic acids was required. The synthesis of 2,5-disubstituted-1,3,4-oxadiazoles by the reaction of carboxylic acids with 1 in PPMA was studied to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(1,3,4-oxadiazole)s showed 10% weight loss both in air and in nitrogen at 440–490°C.     

含1，3，4-NFDA1二唑环系的电致发光材料的研究进展

1 ,3,4 二唑环系是一个缺电子的基团和很弱的空穴接受体 ,含有 1 ,3,4 二唑单元的化合物是一类具有良好电子传输功能的电致发光材料。本文对含有 1 ,3,4 二唑单元的有机小分子和高分子型电致发光材料的近期进展作了综述 ,而且在这类材料的分子设计方面也作了简要的展望     

Synthesis and characterization of poly(1-benzoylsemicarbazide) and poly(1,3,4-oxadiazole amine) from 2-(p-aminophenyl)-1,3,4-oxadizolin-5-one via ring-opening

A novel thermally stable and semiconducting polyheterocycle, poly(1,3,4-oxadiazole amine), was synthesized from 2-(p-aminophenyl)-1,3,4-oxadiazolin-5-one via ring-opening. The polymer is a new class of ordered alternating copoly(aniline) containing 1,3,4-oxadiazole heterocyclic units. The polymer is highly thermally stable and exhibits no weight loss up to 370°C in air. Its electric conductivity is less than 10⁻¹⁰ S · cm⁻¹ at ambient temperature, but markedly increases to 6,5 · 10⁻⁷ S · cm⁻¹ upon doping with iodine.     

A Comparative Analytical Study of Two New Liquid Crystals Used as Stationary Phases in GC

The investigation of the analytical properties of two new nematic sulphur-containing liquid crystals 5-(4-methoxyphenyl)-azophenyl)-2-butylthio-1,3,4-oxadiazole (Phase I) and 5-(4-(propoxyphenyl)-azophenyl)-2-butyl thio-1,3,4-oxadiazole (Phase II) and which comprise units of 1,3,4-oxadiazole instead of the aromatic cycles, was carried out by gas chromatography using glass capillary columns. For this purpose, many solutes belonging to various families and having different polarities and volatilities were injected. Comparison of the retention data of the studied components has shown that Phase II allowed a better separation than the other phase. The two liquid crystalline materials show a good separation of the studied isomers except for xylene.     

Spiro linked compounds for use as active materials in organic light emitting diodes

Spiro-linkage of low molecular weight entities as a new structural concept for the design of new active materials for electroluminescent applications is presented. These spiro linked compounds result in nonpolymeric organic glasses with high thermal stability as can be derived from their high glass transition temperatures (T_g), and characterized by differential scanning calorimetry. Blue emitters based on spiro linked oligophenyles are presented. These compounds are soluble in common organic solvents and show high photoluminescence quantum efficiency in the solid state and high morphologic stability with glass transition temperatures up to 250°C. Charge transport materials based on spiro linked versions of 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) for electron transport, and spiro linked versions of triphenyldiamin derivatives (TPD) for hole transport show improved morphologic properties with nearly unchanged electronic properties compared to the parent compounds. High quality amorphous films can be prepared with the spiro compounds by vapor deposition as well as by simple spin coating.