Sequential separation of <Superscript>99</Superscript>Tc, <Superscript>94</Superscript>Nb, <Superscript>55</Superscript>Fe, <Superscript>90</Superscript>Sr and <Superscript>59/63</Superscript>Ni from radioactive wastes

A sequential separation procedure has been developed for the determination of ⁹⁹Tc, ⁹⁴Nb, ⁵⁵Fe, ⁹⁰Sr and ^59/63Ni in various radioactive wastes generated from nuclear power plants. Ion exchange and extraction chromatography were adopted for individual separation of the radionuclides. Precipitation was supplementarily utilized for both purification of the individual radionuclides and preparation of the radionuclide sources for use in a radioactivity measurement. The chromatographic separation behavior of the radionuclides both from the sample matrix metals and from one another was investigated using stable metals, Re (as a surrogate of ⁹⁹Tc), Nb, Fe, Sr and Ni. The validity of the procedure for reliability and applicability was evaluated by measuring the recovery of the metal carriers added to synthetic radioactive waste solutions. The recoveries by the chromatographic separation were in the range of 84.8 to 102.2% with 2s of less than 8.6%, the recoveries by the precipitation being in the range of 84.3 to 97.3% with 2s of less than 10.9%.     

<Superscript>18</Superscript>F- and <Superscript>11</Superscript>C-labelling of quantum dots with n.c.a. [<Superscript>18</Superscript>F]fluoroethyltosylate and [<Superscript>11</Superscript>C]methyliodide: a feasibility study

Quantum dots functionalized on the outer surface with either amino- or carboxyl functions were labelled with [¹⁸F]fluoroethyltosylate and [¹¹C]methyliodide in order to use the positron emitter-labelled fluorescence agents for multimodality imaging techniques, i.e. fluorescence imaging and positron emission tomography. ¹⁸F-Labelling of both compounds was realized with yields up to 5% as determined by size exclusion chromatography, which is twice as much as reported in literature before [1]. ¹¹C-Labelling of amino- and carboxyl-QDs proceeded with good yields (up to 45 and 35%, respectively) under optimized reaction conditions. In general for both QD-types and both labelling agents the labelling yield increased with the amount of QDs used in the reaction as well as with reaction time and reaction temperature.     

Changes of decay rates of radioactive <Superscript>111</Superscript>In and <Superscript>32</Superscript>P induced by mechanic motion

The changes of decay rates of radionuclide 111in (electron capture) and 32p (β decay) induced by external mechanic motion are studied. The results indicate that, in the external circular rotation in clockwise and anticlockwise centrifuge on Northern Hemisphere (radius 8 cm, 2000 r/min), the half life of 111in compared with the referred (2.83 d) is decreased at 2.83% and increased at 1.77%, respectively; the half life of 32P compared with the referred (14.29 d) is decreased at 3.78% and increased at 1.75%, respectively. When the clockwise and anticlockwise rotations increase to 4000 r/min, the half life of 111in is decreased at 11.31% and increased at 6.36%, respectively; the half life of 32P is decreased at 10.08% and increased at 4.34%, respectively. When the circular rotation is removed, the decay rates of 111in and 32P return back to the referred, respectively. It is found that the external circular rotations in clockwise and anticlockwise centrifuge selectively increased and decreased the decay rates of 111in and 32p, respectively, and the effects are strongly dependent on the strength of circular rotation. It is suggested that these effects may be caused by the chiral interaction.     

Purification of Plasma-Derived Coagulation Factor VIII by Immobilized-Zn<Superscript>2+</Superscript> and -Co<Superscript>2+</Superscript> Affinity Chromatography

Coagulation factor VIII (FVIII) is a glycoprotein that plays a crucial role in the clotting cascade. Replacement therapies with recombinant and plasma-derived concentrates of FVIII are used for treatment of hemophilia A. We have previously purified the human plasma FVIII by immobilized metal affinity chromatography (IMAC) using Cu²⁺ as the metal ligand. In this work we report the purification of FVIII using Zn²⁺ and Co²⁺, two metal ions that bind proteins more weakly. Human plasma was directly applied to the anion-exchange ANX Sepharose FF column and the eluate was used as starting material for the studies in IMAC columns. Using imidazole as desorbing agent, FVIII was recovered with 65% activity in the IMAC-Zn²⁺ column and with 74% activity in the IMAC-Co²⁺ column. Purification factors were 4 and 9, respectively. Using a pH gradient, FVIII was eluted at pH 5.0 with 17% activity in the IMAC-Zn²⁺ and 77% activity in the IMAC-Co²⁺. Vitamin K-dependent proteins, a family of proteins that includes Prothrombin and coagulation factor IX, coeluted with FVIII in the ANX Sepharose FF column and were recovered with the unbound proteins on both IMAC columns. Therefore, Co²⁺ and Zn²⁺ columns were as effective as the Cu²⁺ column in separating FVIII from vitamin K-dependent proteins. Finally, we have shown that FVIII remained complexed with the von Willebrand factor.     

Subcellular mass determination by <Superscript>4</Superscript>He<Superscript>+</Superscript> energy-loss micro-spectrometry

The scanning transmission ion microscope (STIM) has been used to determine the intracellular mass of human cultured cells. A 4He+ microbeam of 2.0 MeV energy was chosen to obtain enhanced ion-energy-loss sensitivity through the micron-thick freeze-dried cells. Local sample mass calculation, based on energy-loss conversion by use of appropriate matrix stopping powers, was performed by use of dedicated software. The method was validated with epoxy resin sections and polymer foil as analogues of biological samples in the range of (intra)cellular thickness, 150 to 3000 nm. STIM analysis resulted in less than 5% error in mass determination. 4He+ energy-loss micro-spectrometry was performed on freeze-dried human ovarian cancer cells, the mean areal mass obtained was 120 microg cm(-2) (200 microg cm(-2) in the nucleus and 250 microg cm(-2) in nucleoli). This method is particularly useful for mass normalization of X-ray fluorescence yields resulting from particle-induced X-ray emission microanalysis (micro-PIXE). When performed successively these two ion-beam micro-analytical methods enable the mapping of true element concentrations within single cells.     

Behavior of <Superscript>134</Superscript>Cs, <Superscript>90</Superscript>Sr,and <Superscript>238</Superscript>Pu in different Syrian soils

The experiment aimed to evaluate the vertical migration of ¹³⁴Cs, ⁹⁰Sr and ²³⁸Pu in the main types of Syrian soils; entisol, inceptisol, alluvial (rock outcrops) and gypsiferous soils, using soil columns through which the aqueous solution of the radionuclides percolated. The results show that the vertical migration of the studied radionuclides through the soil profile depend on the radionuclide and the soil type. More than 97% of ¹³⁴Cs and ²³⁸Pu concentrated in the upper 2 cm of the entisol, inceptisol, and alluvial soils, whereas only 46.2% to 68.6% of the ⁹⁰Sr was retained in the upper 2 cm of these soils. The vertical migration of the studied radionuclides in the gypsiferous soil was different from the other soils. The distribution of the radionuclides in the gypsiferous soil was irregular through the soil profile and reached the deeper layer of the soil. This may be due to its physical characteristics; poor structure stability, high permeability and low retention capacity.     

<Superscript>239</Superscript>Np as a tracer of <Superscript>237</Superscript>Np in effluent samples and low level nuclear waste

In this paper a technique to separate and measure both isotopes (²³⁷Np and ²³⁹Np) together is presented. A combined shape pulse discrimination liquid scintillation measurement with gamma-spectrometry, permits a precise measurement after the radiochemical separation. This technique was carried out by using an Eichrom chromatographic column (TEVA) as the first step of a more complete method, applied in the Nuclear Regulatory Authority, to separate actinides in nuclear waste and liquid effluents. The MCA is 0.08 Bq/l by alpha-spectrometry and 0.22 Bq/l (2σ) by liquid scintillation counting (LSC) for 93.7% of measurement efficiency and 98.4% of chemical recovery.     

Determination of <Superscript>241</Superscript>Am/<Superscript>243</Superscript>Am ratios

Determination of ²⁴¹Am/²⁴³Am ratios is required for vanous purposes including assay of Am by isotope dilution techniques. Alpha-spectrometry on electrodeposited sources is a preferred technique for this determination. However, there is an inherent problem of tail contribution which necessitates the use of suitable algorithms to account for the same. Recently, in the frame of a Coordinated Research Program (CRP) of the International Atomic Energy Agency (IAEA), WinALPHA software has been developed which is a combination of an asymmetrical Gaussian for the main part of the peak and a low energy function. Therefore, it was of interest to compare the use of this algorithm with the routinely used method, in our laboratory, based on geometric progression (G. P.) decrease. Since, there are no reference materials available commercially for ²⁴¹Am/²⁴³Am ratios, synthetic mixtures covening a wide range (0.3 to 2.0) of ²⁴¹Am/²⁴³Am α-activity ratios were used and un-ignited electrodeposited sources were prepared for α-spectrometry. The α-spectra obtained using PIPS detector, were evaluated using the two algonthms The ²⁴¹Am/²⁴³Am α-activity ratios obtained were also compared with those determined by thermal ionization mass spectrometry (TIMS). An agreement of about 1% was obtained in the ²⁴¹Am/²⁴³Am ratios determined by the two methods and also by using the two algorithms for α-spectrum evaluation.     

<Superscript>103</Superscript>Rh, <Superscript>17</Superscript>O,and <Superscript>31</Superscript>P NMR study of Rh(III) complex formation in acidic sulfate-phosphate media

Rhodium(III) complex formation with phosphoric acid in strong acidic solutions has been studied by ¹⁰³Rh, ¹⁷O, and ³¹P NMR. Phosphoric acid is mainly coordinated to rhodium as a monodentate terminal HPO₄²⁻ ion, while the coordinated phosphate ion accounts for no more than 7%.     

Extraction chromatography for the separation of <Superscript>239</Superscript>Np from <Superscript>243</Superscript>Am

Summary An extraction chromatography method was developed for the separation of 239Np from ²⁴³Am in nitric acid solution. A sorbent based on aliphatic quaternary amine Aliquat-336 and hydrophobized silica gel was prepared. ²³⁹Np reduced to the oxidation state(IV) with ferrous sulfamate in 2M or 6M HNO₃ sorbs on the prepared silica gel column. After washing with 0.1M ferrous sulfamate in 2.5M HNO₃, ²³⁹Np is eluted with 0.1M HNO₃ containing 0.02M HF. The separation of ²⁴³Am from ²³⁹Np is very effective. The purity of ²³⁹Np was found to be better than 99.5%. The proposed ²³⁹Np milking procedure is suitable for the preparation of ²³⁹Np tracer that can be used for the determination of ²³⁷Np radiochemical yield.     

Mixing of atmospheric <Superscript>210</Superscript>Pb and <Superscript>7</Superscript>Be and <Superscript>137</Superscript>Cs and <Superscript>90</Superscript>Sr fission products in four characteristic soil types

Depth distribution of atmospheric ²¹⁰Pb and ⁷Be and ⁹⁰Sr and ¹³⁷Cs fission products was measured in two types of aeolian soils (desert dust and volcanic ash), irrigated paddy soil and strongly acidic soil. The depth dependence of ²¹⁰Pb, ⁷Be and ¹³⁷Cs show that these radionuclides have been diffused as solid soil particles in surface soil layers. In aeolian soil layers, about 50% of ⁹⁰Sr were diffused in surface soil layer and the remaining 50% had penetrated to deeper layers. The half of the fission particles containing ⁹⁰Sr were shown to have decomposed over the past 35 years.     

Study on the method of preparation <Superscript>97</Superscript>Tc

Technetium-99 is one of several long-lived fission products which, when detected in the environment can give an indication of a specific nuclear activity. The most sensitive analytical technique for ⁹⁹Tc yet reported is by isotopic dilution mass spectrometry with technetium-97 as the yield tracer. A method for the preparation of ⁹⁷Tc is reported in this paper. ⁹⁷Tc was obtained by irradiation of a sample of natural ruthenium metal in a high flux reactor. After cooling for 2 years, the technetium was isolated from the sample by technique combining; deposition, solvent extraction, and ion-exchange chromatography techniques. ^99mTc and ¹⁰³Ru were used as radio-tracers for the process. The results showed that more than 70% of the Tc was recovered the decontamination factor is more than 2.3 × 10⁷. The ⁹⁷Tc was calibrated by isotope dilution mass spectrometry with ⁹⁹Tc as the yield tracer. The final yield was 29.56 μg of ⁹⁷Tc suitable for use as a mass spectrometric spike (weight % ⁹⁷Tc spike: ⁹⁷Tc, 84.77%; ⁹⁸Tc, 15.03%; ⁹⁹Tc, 0.20%).     

Synthesis of Mg<Superscript>2+</Superscript>-, Al<Superscript>3+</Superscript>-, and Ga<Superscript>3+</Superscript>-containing layered hydroxides and supported platinum catalysts based thereon

The effect of the cationic composition of MgAl(Ga) layered double hydroxides on the structure, texture, and acid–base properties of related oxide supports for platinum catalysts has been investigated. As gallium is progressively substituted for aluminum in the mixed oxide, the properties of the support change only slightly, while the activity of the Ga–Pt catalysts in propane conversion increases, the propylene selectivity remains high (99%), and C–C bond hydrogenolysis is hampered.     

Sorption of Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> by Natural Biomaterial: Duck Feather

Feather fibers were modified by treatment with 5% tannic acid (TA) solution. Kinetics of the modification was investigated as a function of the reaction time. The maximum loading of TA on feather reached 8.3% after being treated by TA for 9 h. The adsorption of metal cations (Cu²⁺, Zn²⁺) by unmodified and TA-modified feather fibers was investigated as a function of fiber weight gain, temperature, and pH of the metal solution. The adsorption was enhanced at alkaline pH and ambient temperature and increased with the weight gain of TA. The maximum uptake of metal cations (Cu²⁺, 0.77 mmol/g; Zn²⁺, 0.95 mmol/g) was obtained by TA-modified feather at weight gain: 8.3%, pH 11, while at the acidic pH, the adsorption of metal cations by either unmodified or TA-modified feather was negligible. The influence of anions on the adsorption of metal cations was also studied. The uptake of Cu²⁺ from chloride was higher and faster than that from nitrate. Desorption of the metals was performed at acidic pH 2.5 for 48 h. The feather–TA–metal complexes exhibited higher stability for metal cations than the feather–metal complexes. All these experiments reveal that TA-modified feather fibers have good adsorption to metal cations and can be used as metal adsorbent in wastewater treatment.     

Effect of the Electrode Material on the Reduction of La<Superscript>3+</Superscript> and Ce<Superscript>3+</Superscript> in Fluoride-Conducting Solid Electrolytes

The reduction of immobile cations La³⁺ and Ce³⁺ in fluoride-conducting solid electrolytes (FSE) LaF₃ (Eu²⁺ 0.8 mol %), LaF₃ (Sr²⁺ 5 mol %), and CeF₃ (Sr²⁺ 5 mol %) in contact with Ag, Bi, Si, La, Ce, and Sm working electrodes is studied by chronoamperometry and voltammetry with linear potential scan. Discovered is linear dependence of initial segments of potentiostatic transients of cathodic current on t ^1/2 at FSE interfaces with Ag, Bi, La, Ce, and Sm. The dependence is due to diffusion-controlled instantaneous nucleation of Ln and Ce. The La³⁺ and Ce³⁺ reduction at the FSE/Ag interface is reversible in a narrow region. The reduction and oxidation of La³⁺ and Ce³⁺ (cations of the FSE rigid lattice) at the FSE/Me (Me = La, Ce and Sm, Bi, Si) interface is irreversible and involves a chemical reaction.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 662–672.Original Russian Text Copyright © 2005 by Turaeva, Kot, Urchukova, Murin.     

Preparation of <Superscript>166</Superscript>Dy/<Superscript>166</Superscript>Ho-chitosan as an in vivo generator for radiosynovectomy

¹⁶⁶Ho is one of the most effective radionuclides used for radiosynovectomy. One method to deliver this radioisotope to target tissue is via the ¹⁶⁶Dy/¹⁶⁶Ho in vivo generator system. The aim of this work was to prepare ¹⁶⁶Dy/¹⁶⁶Ho-chitosan (¹⁶⁶Dy/¹⁶⁶Ho-CHIT) in vivo generator for radiosynovectomy applications. ¹⁶⁶Dy obtained by the irradiation of natural ¹⁶⁴Dy target. ¹⁶⁶Dy was separated from ¹⁶⁶Ho by extraction chromatographic method (separation yield; 93% and separation factor;1.7). Chitosan labeling was performed in acetic acid with 99.3 ± 0.6% radiochemical purity. Biodistribution studies on intraarticular injected rats demonstrated high retention in the knee joint even 7 days showing no radioactivity leakage from the injection site into other organs as well as any translocation of the daughter nucleus after β^? decay of ¹⁶⁶Dy.     

<Superscript>137</Superscript>Cs/<Superscript>137m</Superscript>Ba radioisotope generator based on 6-tungstocerate(IV) column matrix

Summary Barium-137m radioisotope generator of the chromatographic column elution mode based on loading 1.5 g 6-tungstocerate(IV) gel matrix with ~54 kBq of fission-produced ¹³⁷Cs is described. The elution performance of the generated ^137mBa radionuclide was investigated as a function of chemical composition of the eluent, flow rate, elution frequency, and age of the generator system. At comparable conditions, ^137mBa eluates with 0.9% NaCl-0.1M HCl eluent had higher elution yields and radionuclidic purity than with 0.1M NH₄Cl-0.1M HCl eluent. The generator has been repeatedly eluted for 311 days by passing 4810 ml of the saline eluent (10 ml × 481 elution operations) at a flow rate of 3.0 ml/min. Barium-137m eluates of high and reproducible elution yields, chemical and radionuclidic purities of (≥ 99.99%) were obtained.     

Separation of radioarsenic from irradiated germanium oxide targets for the production of <Superscript>71</Superscript>As and <Superscript>72</Superscript>As

A method for the separation of no-carrier-added arsenic radionuclides from the bulk amount of proton-irradiated GeO₂ targets as well as from coproduced radiogallium was developed. The radionuclides ⁶⁹Ge and ⁶⁷Ga produced during irradiation of GeO₂ were used as tracers for Ge and Ga in the experiments. After dissolution of the target the ratio of As(III) to As(V) was determined via thin layer chromatography (TLC). The extraction of radioarsenic by different organic solvents from acid solutions containing alkali iodide was studied and optimized. The influence of the concentration of various acids (HCl, HClO₄, HNO₃, HBr, H₂SO₄) as well as of KI was studied using cyclohexane. The optimum separation of radioarsenic was achieved using cyclohexane with 4.75 M HCl and 0.5 M KI and its back-extraction with a 0.1% H₂O₂ solution. The separation leads to high purity radioarsenic containing no radiogallium and <0.001% [⁶⁹Ge]Ge. The overall radiochemical yield is 93 ± 3%. The practical application of the optimized procedure in the production of ⁷¹As and ⁷²As is demonstrated and batch yields achieved were in the range of 75–84% of the theoretical values.     

A method for calculating <Superscript>16</Superscript>o/<Superscript>18</Superscript>o peptide ion ratios for the relative quantification of proteomes

A method is described for the identification and relative quantification of proteomes using accurate mass tags (AMT) generated by nLC-dual ESI-FT-ICR-MS on a 7T instrument in conjunction with stable isotope labeling using 16O/18O ratios. AMTs were used for putative peptide identification, followed by confirmation of peptide identity by tandem mass spectrometry. For a combined set of 58 tryptic peptides from bovine serum albumin (BSA) and human transferrin, a mean mass measurement accuracy of 1.9 ppm +/-0.94 ppm (CIM99%) was obtained. This subset of tryptic peptides was used to measure 16O/18O ratios of 0.36 +/- 0.09 (CIM99%) for BSA (micro = 0.33) and 1.48 +/- 0.47 (CIM99%) for transferrin (micro = 1.0) using a method for calculating 16O/18O ratios from overlapping isotopic multiplets arising from mixtures of 16O, 18O1, and 18O2 labeled C-termini. The model amino acid averagine was used to calculate a representative molecular formula for estimating and subtracting the contributions of naturally occurring isotopes solely as a function of peptide molecular weight. The method was tested against simulated composite 16O/18O spectra where peptide molecular weight, 16O/18O ratio, 18O1/18O2 ratios, and number of sulfur atoms were varied. Relative errors of 20% or less were incurred when the 16O/18O ratios were less than three, even for peptides where the number of sulfur atoms was over- or under-estimated. These data demonstrate that for biomarker discovery, it is advantageous to label the proteome representing the disease state with 18O; and the method is not sensitive to variations in 18O1/18O2 ratio. This approach allows a comprehensive differentiation of expression levels and tentative identification via AMTs, followed by targeted analysis of over- and under-expressed peptides using tandem mass spectrometry, for applications such as the discovery of disease biomarkers.     

Synthesis of a <Superscript>188</Superscript>Re–DTPMP complex using carrier-free <Superscript>188</Superscript>Re and study of its stability

Labeling of diethylenetriamine-N,N,N′,N″,N″-pentakis(methylenephosphonic) acid (DTPMP) with rhenium-188 using stannous chloride as a reducing agent has been investigated. Dependence of the yield of the ¹⁸⁸Re–DTPMP complex on the concentration of the reducing agent, pH, reaction time, temperature, ascorbic acid and amount of carrier added has been studied. Under optimum conditions, the labeling yield of ¹⁸⁸Re–DTPMP complex is 95% for the carrier-free ¹⁸⁸Re but with the carrier-added ¹⁸⁸Re the labeling yield is more than 97%. Furthermore, the stability of the ¹⁸⁸Re–DTPMP complex against pH change and dilution with saline has been also studied. It is found that the addition of carrier stabilizes the ¹⁸⁸Re–DTPMP complex against pH change and dilution.