STUDY ON THE SEPARATION OF PENTOSE AND HEXOSE FROM GLUCOSE YEAST WATER

D－ribose is a unique ,5-carbon sugar that occurs naturally in all living cells,D-ribose has been used as a staring material for preparation of some certain medicines or just as a new nutraceutical that helps the ody naturally restore its energy level,The fermentative processes are the best for their relatively simple series of production steps and relatively cheap starting materials.However,because of the many impurities in glucose yeast water and its dark color,pretreatment and purification must be done to the fluid before D-ribose can be separated.In this paper,separation and purification of D-ribose was carried out using cation exchange resins,of which Ca^2+ exchange resin had the best effect.The optimal condition for adsorption is a flow velocity of 0.5 BV/h at adsorption temperature of 25℃,The optimal condition for desorption is a flow velocity of 0.5 BV/h at desorption temperature of 80℃。     

Statistical theory for a hydrogen bonding fluid system of A a D d type (IV): Depletion potential between colloid particles

The depletion potential between two colloid particles immersed in a hydrogen bonding fluid has been investigated by density functional theory. The study is motivated by the wide applications of hydrogen bonding fluids in the field of colloid science, and the effects of relevant factors on the depletion potential and depletion force between colloid particles have been studied. These factors include the size ratio of the colloid particle to the fluid molecule, the bulk density of the fluid, the functionality (the number of proton acceptors a and proton donors d) and hydrogen bonding strength as well as the colloid-fluid interaction energy. By comparing the depletion potential calculated under various conditions, it is shown that the effects of these factors on the depletion potential are very significant, and in particular in regulating the depletion force and its range.     

Adsorption of humic substances by macro weakly basic ion-exchange resin and their effects on removal of Cu2+ and Pb2+

<正>Adsorption ofhumic,tannic and gallic acids by a macro weakly basic ion-exchange resin JN-01 was studied.The adsorption capacity of this resin for gallic and tannic acids is much higher than that for humie acid,which can be explained on the basis of both their molecular size and ionization degree.Furthermore,humic acid is separated into different components with molecular weight in the range from 2000 Da to 100000 Da by ultra-filter,and their adsorption isotherms on resin JN-01 indicate that humic acid's molecular weight is an important factor which makes significant influence on adsorption.Finally,changes in the amount of Cu~(2+) and Pb~(2+) adsorbed on resin JN-01 as a function of the concentration of each of these three acids were studied.A large increase in the heavy metal ions uptake is observed in the presence of humic substance,such advantages are due to the interactions between the heavy metal ions and the unbound functional groups of the adsorbed organic acids.     

ADSORPTION DYNAMICS OF MACROPOROUS POLYMERIC ADSORBENT I. The Studies on the Particle Diffusion Mass-Transfer Process

1 INTRODUCTIONBoyd et al established the foundation of ion-exchange dynamics based on the Fick's Law intothe process of ion-exchange diffusion at firstll]. At present time, most of studies for themacroporous adsorption resin are focus on the synthesis of new adsorbent, observing the effectof some conditions on the adsorption capacity and adsorption selectivity. But there are nopedicular studies on the aspect of adsorption dynamics, such as mass-transfer rate, mass-transfermechanism and so…     

PREPARATION AND PROPERTIES OF EPOXY RESIN MODIFIED BY LIQUID CHLOROPRENE-HYDROXYETHYLMETHACRYLATE COPOLYMER

The epoxy resin modified by liquid chloroprene-hydroxyethylmethacrylate copolymer (CP-HEMA) is a new kind of structural adhesives with good mechanical properties. By changing its mole-cular structure, it may also have such desirable properties as retardation of combustion, enduringweather aging, inert oils and chemicals. A series of the thermosets of the epoxy resin modifiedby CP-HEMA used as a toughener were prepared. The effects of CP-HEMA content, catalyst con-tent and curing temperature on the mechanical properties of modified epoxy resin system were studied.The thermal weight-loss curves were examined. The two-phase morphology was observed and dis-cussed.     

THERMODYNAMICS ADSORPTION OF MANGANESE ION ON 1-（2-PYRIDYLAZO）-2-NAPHTHOL-6-SULPHONIC ACID IMPREGNATED RESIN

An ion-exchange resin of type 201×7 was impregnated with the reagent 1-（2-Pyridylazo）-2-naphthol-6-sulphonic Acid （PAN-S）. The adsorption characteristics of PAN-S resin for manganese ion were studied on the static equilibrium adsorption. Within temperature range of 288K-313K and the concentration range investigated, equilibrium data for the adsorption of manganese ions from aqueous solutions by PAN-S resin were obtained and correlated with Freundlich and Langmuir equation. The results showed that the process of the adsorption of manganese ions from aqueous solution by PAN-S was an exothermic process. Estimations of the isothermic enthalpy change of adsorption, free energy change and entropy of adsorption are reported, and the adsorption behaviors are reasonably interpreted.     

Characterization,Adsorption Properties and Mechanism of Modified Sophora Japonica Leaves to Benzene

The biosorbent has been prepared with the sophora japonica leaves from the agricultural residue as the raw material by the alkaline blanching method, and characterized by BET, SEM, EDS and FTIR analysis methods. The modified sophora japonica leaves possessed more adsorption sites and had more strongly adsorbed chemical groups, which were beneficial to the adsorption. We have further investigated the adsorption performance of the indoor benzene. The secondary regression orthogonal rotation was employed to optimize the preparation process for the optimal processing conditions and regression model. The effects of single factors such as particle size, temperature, and adsorbent dosage of the sophora japonica leaves were analyzed, and adsorption isotherms and adsorption kinetics were studied. The results show that the optimal adsorption conditions were as follows: sodium hydroxide concentration with 0.1 mol/L, water bath time for 70 min, water bath temperature at 60 ℃ and Ymax = 21.38%. The best single factors included particle size with 30 mesh, temperature at 25 oC, 3 g dosage, which are consistent with the Freundlich model, and the adsorption state was more inclined to multilayer active site adsorption with 25 mg/g of saturated adsorption amount; furthermore, the adsorption kinetics followed the quasi-secondary kinetic model(R2 = 0.9731) and the adsorption process was a physicochemical mixed adsorption process controlled by chemisorption; Compared with the adsorption effect, the removal rate to the benzene of modified sophora japonica leaves was significantly superior to other materials at the level 1%, namely, modified sophora japonica leaves diatomite bamboo charcoal activated carbon macroporous resin, and the modified biosorbent had a good cycle regeneration ability.     

Synthesis of the water-compatible p-acetaminophen resin and its adsorption performances for vanillin in aqueous solution

A novel p-acetaminophen resin(named as GQ-1) was synthesized with chloromethylated polystyrene and p-acetaminophen.It can be used without any wetting process.The objective of this work was to study the adsorption performances for vanillin onto GQ-1 with two kinds of the hydrogen bond site of acetamino group and hydroxyl group.The results showed that the adsorption property of vanillin onto GQ-1 was superior to XAD-4,H103,NDA150,and NDA88.The adsorption capacity of vanillin onto GQ-1 is not greatly discrepant until the solution pH is higher than 5.31.The saturated adsorption quantity of vanillin was up to 141.32 mg/mL(wet resin) according to the dynamic adsorption and desorption experiments at 293 K.The resin could be regenerated by 7 BV ethanol.     

STUDY ON THE PERFORMANCE AND MECHANISM OF ADSORPTING RHENIUM BY USING NEUTRAL PHOSPHOROUS-BASED LEVEXTREL RESIN Ⅱ. CL-P350-KReO_4-HCl System

In this paper study on the property and mechanism of adsorpting rhenium from aqueous hydrochloric acid by using methyl phosphorous acid dimythyl heptyl ester levextrel resin (CL - P350) is reported. The effects of time, acidity, concentration of rhenium, and temperature on the adsorption of rhenium were investigated. The mechanism of adsorpting rhenium was discussed by chemical analytic and IR method, and dynamic adsorption and elution were studied. Experimental results show that the adsorption equilibration is reached in 4 min, the distribution coefficient (D) of Re (Ⅶ) increases with increase of concentration of HCl and reaches maximum 3.0 - 4. OmoL/L HCl. ReO4- is taken up by ion association mechanism and can be described by Langmuir equation of the equilibrium state. The thermody-namic parameters in the adsorption process of ReO4- have been determined to be: △H= - 29KJ/moL,△G = - 25KJ/moL and △S = - 13.5J/moL respectively. The saturation adsorption capacity of rhenium is 19.2mg/g when the solution containing 0.372g/L Re and 3. 0mol/L HCI was passed through the resin column. The recovery percentage of rhenium is 98.4% while distilled water was used as an eluent.     

LIQUID CHLOROPRENE-HYDROXYETHYL METHACRYLATE COPOLYMER MODIFIED EPOXY RESIN Ⅱ. N, N-DIMETHYL BENZYL AMINE CURING SYSTEM

A series of liquid chloroprene-hydroxyethyl methacrylate copolymer (CP-HEMA) modifiedepoxy resin were prepared. The effects of CP-HEMA content, curing conditions on physical pro-perties of the modified system were examined. With IR and Viscoelastocuremeter, the curing reactionrate was determined and the mechanism of the curing reaction was discussed. The effects of CP-HEMA content and curing conditions on morphology were mainly observed by scanning electronmicroscopy.     

STUDY ON THE PERFORMANCE AND MECHANISM OF ADSORPTING RHENIUM BY USING NEUTRAL PHOSPHOROUS—BASED LEVEXTREL RESIN Ⅱ.CL—350—KReO4—HCl System

In this paper study on the property and mechanism of adsorpting rhenium from aqueous hydrochloric acid by using methyl phosphorous acid dimythyl heptyl ester levextrel resin(CL-P350) is reported.The effects of time,acidity,concentration of rhenium,and temperature on the adsorption of rhenium were investigated. The mechanism of adsorpting rhenium was discussed by chemical analytic and IR method,and dynamic adscrption and elution were studied.Experimental results show that the adsorption equilibration is reached in 4 min,the distribution coefficient(D) of Re(Ⅶ）increases with increase of concentration of HCl and reaches maximum 3.0-4.0moL/L HCl.ReO4^- is taken up by ion association mechanism and can be described by Langmuir equation of the equilibrium state.The thermodynamic parameters in the adsorption process of ReO4^- have been determined to be:ΔH=-29KJ/moL,ΔG=-25KJ/moL and ΔS=-13.5J/moL respectively.The saturation adsorption capacity of rhenium is 19.2mg/g when the solution containing 0.372g/L Re and 3.0mol/L HCl was passed through the resin column.The recovery percentage of rhenium is 98.4% while distilled water was used as an eluent.     

ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

4,4‘-diaminostilbene-2,2‘-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column.The results showed that this method was suitable for removal of chemical oxygen demands(COD) and color,About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions.i.e.temperature 20℃,flow rate lbed volume/hour(BV/hr)and pH1-2.The resin was efficiently regenerated with aqueous sodium hydroxide and water.Furthermore,65.5% of 4,4‘-dinitrostilbene-2,2‘-disulfonic acid(DNS) could be recovered from wastewater for possible recycling to the manufactureing process.The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.     

SYNTHESES AND ADSORPTION PROPERTIES OF PHENOL-FORMALDEHYDE-TYPE CHELATING RESINS BEARING THE FUNCTIONAL GROUP OF TARTARIC ACID

Several kinds of novel chelating resins bearing the functional group of tartaric acid (TTA-FQ-12, TTA-FQ-23, and TTA-FQ-34) were synthesized by reacting epoxy maleic anhydride, which was prepared through the oxidization reaction of maleic anhydride by hydrogen peroxide, with phenol-formaldehyde resin containing polyamine (FQ resins series). The effects of such factors as reaction time, reaction temperature and pH value on the loading capacity of TTA in resins were investigated. The results showed that the optimum reaction conditions are as follows: time 9-12h; temperature 90-105℃;pH value 6-10. The loading capacities of TTA can reach 0.15, 0.14, and 0.11 mmol/g^-1 when the functional group of FQ resin was -OCH2CH2NHC2H4NH2, -O(CH2CH2NH)2C2H4NH2 and -O(CH2CH2NH)3C2H4NH2), respectively. The structures of resins were characterized by FTIR spectra. The primary study on the adsorption properties of the resins for metal ions showed that there are two kinds of adsorption mechanisms i.e. ion exchange and chelate in the adsorption process. TTA-FQ resins have much higher adsorption selectivity for Pb^2 and Zn^2 than for Cu^2 and Ni^2 . These resins can probably be used for separating Pb^2 or Zn^2 in the mixture of metal ions or for treating wastewater containing heavy metal ions.     

Characterization and thermal stability of PMR polyimides using 7-oxa-bicyclo[2,2,1]hept-5-ene-2, 3-dicarboxylic anhydride as end caps

An anhydride monomer containing ether oxide bridge,7-oxa-bicyclo[2,2,1]hept-5-ene-2,3-dicarboxylic anhydride (ONA),was successfully synthesized by Diels-Alder reaction of furan and maleic anhydride.The ONA was also studied as an end-cap for the polymerization of monomer reactant(PMR) type polyimides.Three molecular weight levels of the ONA end-capped PMR resins were evaluated.The effects of process conditions of these novel PMR resins on thermal and mechanical properties were investigated.It was demonstrated that the imidized prepolymers using the end-cap have good processability,and the cured polyimide specimens exhibited good thermal stability.The initial decomposition temperature, T_d(ca.580℃) and glass transition temperature,T_g(330℃) of the novel resin(PI-20),prepared under optimum process conditions,compare favorably with the T_d(ca.620℃) and T_g(ca.348℃) of the state-of-the-art resin(PI’-20),respectively.     

Adsorption behavior of phenolic compounds onto polymeric adsorbents modified with 2-carboxybenzoyl groups

<正>Two hypercrosslinked polymeric adsorbents(ZH-01 and Amberlite XAD-4 resin) were employed to remove three kinds of phenolic compounds including phenol,4-nitrophenol and 2,4-dinitrophenol from aqueous solutions.The study was focused on the static equilibrium adsorption behavior,the column dynamic adsorption and desorption profiles.The Freundlich model gave a perfect fitting to the isotherm data.The adsorbing capacities for these three compounds on ZH-01 were higher than those on Amberlite XAD-4 within the temperature range 288-318 K,which was attributed to the large micropore area and 2-carboxybenzoyl functional groups on the network of ZH-01 resin.The adsorption for phenol and 4- nitrophenol on ZH-01 was a physical adsorption process,while for 2,4-dinitrophenol it was a coexistence process of physical adsorption and chemisorption's transitions.The column test showed the advantages of ZH-01 in the dynamic adsorption processes of phenolic compounds.Being used as the desorption reagent,sodium hydroxide solution showed an excellent performance.     

Effect of diluent and reaction parameter on selective oxidation of propane over MoVTeNb catalyst using nanoflow catalytic reactor

The selective oxidation of propane to acrylic acid over an MoVTeNb mixed oxide catalyst, dried and calcined before reaction has been studied using high-throughput instrumentation, which is called nanoflow catalytic reactor. The effects of catalyst dilution on the catalytic performance of the MoVTeNb mixed oxide catalyst in selective oxidation of propane to acrylic acid were also investigated. The effects of some reaction parameters, such as gas hourly space velocity （GHSV） and reaction temperature, for selective oxidation of propane to acrylic acid over diluted MoVTeNb catalyst have also been studied. The configuration of the nanoflow is shown to be suitable for screen catalytic performance, and its operating conditions were mimicked closely to conventional laboratory as well as to industrial conditions. The results obtained provided very good reproducibility and it showed that preparation methods as well as reaction parameters can play significant roles in catalytic performance of these catalysts.     

Effects of Various Factors on the Modification of Carbon Nanotubes with Polyvinyl Alcohol in Supercritical CO2 and Their Application in Electrospun Fibers

Supercritical（SC） CO2 anti-solvent induced polymer epitaxy（SAIPE） method was used to help prepare nanohybrid carbon nanotubes（CNTs） wrapped with polyvinyl alcohol（PVA） nanocrystals.With the variation of a series of experimental conditions or peripheral effects,such as PVA concentration,CNTs concentration,and SC CO2 pressure,the optimal experimental variables for PVA-nanocrystals growing on CNTs have been found.The adsorption of polymer on CNTs via multiple weak molecular interactions has been studied by Fourier transform infrared（FTIR） spectroscopy and Raman spectroscopy.The mechanism about the formation of PVA nanocrystals on CNTs can be suggested through the experimental phenomena.These CNTs wrapped with PVA nanocrystals can be directly used as nanofillers to fabricate PVA composite fibers reinforced with CNTs by electrospinning.     

聚合物负载的钯-咪唑催化烯烃加氢

A polymer-supported palladium-imidazole catalyst was used to catalyze the hydrogenation of various olefins under mild conditions. The rate of hydrogenation was studied. The effects of factors such as substrate concentration,catalyst concentration,partial pressure of hydrogen and temperature on initial rate of reaction of selected olefins were investigated. A mechanism for the reaction was proposed from the rate equation. The effects of the solvent and structure of the olefin on the rate of hydrogenation were investigated. The catalyst showed good reusability without any leaching of metal from the support. The homologous analog of the polymer-supported catalyst could not be used as catalyst for the hydrogenation of olefins in methanol because there was precipitation of the metal during reaction.     

PREPARATION AND PHOTOSENSITIVITY OF WATER SOLUBLE PHENOLIC RESINS CONTAINING ACRYLOYL AND QUATERNARY AMMONIUM CHLORIDE GROUPS

New water soluble and photocrosslinkable prepolymers colltaining acrylate and quaternary ammonium salt groupswere synthesized from epoxy phenolic resin via ring-opening reaction with acrylic acid and with aqueous solution oftriethylamine hydrochloride successively. The second reaction needs no phase transfer catalyst to accelerate, since theproduct formed can act as a phase transfer catalyst. The prepolymer obtained contains both photocrosslinkable acrylategroups and hydrophilic quaternary ammonium salt groups. Optimum conditions for these reactions were studied. Thephotosensitivity of the prepolymer was also investigated. The effects of different photoinitiators, different crosslinkablediluent monomers and amine accelerator on the photosensitivity of the prepolymer were compared. The photoinitiator ofhydrogen abstraction type is still effective without using amine or alcohol as accelerator, because the prepolymer containsα H beside the OH groups formed in the ring-opening reactions     

ADSORPTION OF 2,4-DICHLOROPHENOL IN AQUEOUS SOLUTION ONTO ADSORPTION RESIN MODIFIED BY N-ACETYLANILINE

A hypercrosslinked adsorption resin （ZH-05） modified by N-acetylaniline in the post crosslinking process was prepared. The adsorption properties of ZH-05 toward 2,4-dichlorophenol in comparison with granular activated carbon （GAC） and Amberlite XAD-4 were observed. The present study mainly focuses on the static equilibrium adsorption behaviors, desorption profiles and the proof of chemisorption. The results show that the Langmuir equation can give a perfect fitting to experimental data, and high temperature was favorable for adsorption of 2,4-dichlorophenol on ZH-05. A related equation was used to correlate the amount of chemisorption and the suppositionai chemisorption equilibrium concentration of adsorbate in aqueous solution. The adsorption capacities from different ranges of temperature and the static desorption experiment both reveal the same conclusion, i.e., the adsorption of 2,4-dichlorophenol from water on ZH-05 is a coexistent process of physical adsorption and chemical transition as on GAC.