基于分子内电荷转移的阴离子比率荧光分子探针

设计合成了一种基于4-甲基-1-羟基二苯甲酮对硝基苯腙的比色和比率荧光阴离子受体1。此类受体以羟基和腙单元为识别位点,以硝基苯基为信号报告基团。向受体1的DMSO溶液中加入AcO-、H2PO4-、F-后,溶液颜色由黄色变为紫红色,而加入所研究的其它阴离子则无变化,从而实现对AcO-、H2PO4-、F-这三种离子的裸眼识别。利用紫外-可见吸收光谱、荧光光谱考察了其与AcO-,H2PO4-,F-,Cl-,Br-,I-等阴离子的识别作用。1H NMR滴定为受体分子与阴离子之间氢键作用本质提供了有力证据。     

Synthesis of Indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine Derivatives and Their Recognition Properties as New Type Anion Receptors

A new type anion receptors containing indeno[2′,1′:5,6]pyrido[2,3‐d]pyrimidine have been synthesized via three‐component reaction of aldehyde, 6‐aminopyrimidine‐2,4‐dione, and 1,3‐indanedione in aqueous media. The binding properties of the receptors with anions such as F^?, Cl^?, Br^?, AcO^?, HSO₄^?, and H₂PO₄^? have been investigated by UV–vis spectroscopy methods. The results have shown that receptors have good selectivity to F^? and AcO^?, and a 1:1 stoichiometry complex has been formed between compounds and anions.     

Acenaphthenequinone based simple colorimetric anion sensor with only one binding site

Quinonehydrazone compound 1 was designed to be a simple chromogenic anion sensor with one anion binding site. The sensor 1 was easily obtained in 83% yield by the condensation of acenaphthenequinone with 4-nitrophenylhydrazine in ethanol solution. In DMSO, sensor 1 could high selectively and visually detect anions with strong basicity (e.g., AcO^?, F^? and H₂PO₄ ^?) from chloride, bromide, and iodide ions with weak basicity.     

Novel Hydrazone‐Based Tripodal Sensors: Single Selective Colorimetric Chemosensor for Acetate in Aqueous Solution

A series of novel tripodal colorimetric anion sensors based on hydrazone CHN NH groups have been synthesized and their recognition behavior with anionic guests has been studied. In DMSO solutions, sensors 1 and 2 show colorimetric responses for F⁻, H₂PO⁻₄ and AcO⁻, while in DMSO/H₂O (9:1, V/V) solutions, sensor 1 shows single selectivity for AcO⁻. ¹H NMR titration confirms that the tripodal sensors could bind anions through the collaboration of three hydrazone groups and anions residing in the central cavity of the sensors.     

Selective “naked-eye” sensing of acetate ion based on conformational flexible amide-pyridinium receptor

A simple pincer-shape anion receptor L1 containing amide-pyridinium as binding unit was synthesized and its anion binding properties were investigated by UV–Vis, NMR titration spectra and molecular simulation. L1 displayed better affinity toward AcO^? ion with visible color change compared with other investigated anions, including F^?, H₂PO₄ ^?, Cl^?, Br^?, I^?, NO₃ ^? and HSO₄ ^? ions. The selectivity was ascribed to the synergistic effects arising from hydrogen bonding, electrostatic interaction and induced-fit process.     

Anion exchange in trimethyl‐ and triphenyltin complexes with chromogenic ligands: solution equilibria and colorimetric anion sensing

A series of organotin(IV) compounds R₃Sn(A) where R = Me or Ph and A is a chromogenic nitrophenolate ligand were prepared and studied as possible colorimetric sensors for anions (F⁻, Cl⁻, Br⁻, AcO⁻, H₂PO₄⁻). Equilibrium constants for a complete set of reactions between R₃Sn(A) with A = 2‐amino‐4‐nitrophenolate (ANP) or 4‐nitrophenolate and anions (X⁻) involving formation of complexes R₃Sn(A)(X)⁻ and substitution products R₃Sn(X) and R₃Sn(X)₂⁻ were determined by UV‐vis and ¹H NMR titrations in MeCN and DMSO. The binding selectivity was AcO⁻ > F⁻ > H₂PO₄⁻ > Cl⁻ ≫ Br⁻ in both solvents and both for R = Me and Ph with higher affinity for R = Ph. Compounds with A = ANP were found to have the optimum properties as anion sensors allowing optical detection of F⁻, AcO⁻ and H₂PO₄⁻ anions in the 5–100 µM range by appearance of an intense absorption band of free ANP resulting from its substitution with the analyte. Selectivity and affinity of anion interactions with R₃Sn(ANP) are similar to those for thiourea receptors, but the organotin receptor produces a much larger naked eye detected optical signal, operates equally well in nonpolar and polar solvents and tolerates the presence of up to 20% vol. of water in DMSO. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,Physical Properties,and Anion Recognition of Two Novel Larger Azaacenes: Benzannelated Hexazaheptacene and Benzannelated N,N′‐Dihydrohexazaheptacene

Two novel larger azaacenes with six or ten N atoms in their backbones, benzannelated 9,11,13,22,24,26‐hexazatetrabenzo[a,c,l,n]heptacene ( HATBH , 1 ) and benzannelated 9,26‐dihydro‐9,11,13,22,24,26‐hexaza‐tetrapyrido[3,2‐a: 2′,3′‐c: 3′′,2′′‐l: 2′′′,3′′′‐n]heptacene ( DHATPH, 2 ), have been successfully synthesized in two steps. The theoretical band gaps estimated through DFT calculations for HATBH ( 1 ) and DHATPH ( 2 ) are 1.949 eV and 2.278 eV, which are close to the experimentally obtained optical band gaps (2.14 eV and 2.39 eV). Interestingly, HATBH ( 1 ) can act as efficient anion sensor for F^? and H₂PO₄^?, while DHATPH ( 2 ) selectively responds to F^? among the ten different anions used (F^?, Cl^?, Br^?, I^?, PF₆^?, HSO₄^?, NO₃^?, BF₄^?, AcO^?, and H₂PO₄^?). Our synthetic strategy could offer a promising and easy way to obtain even larger azaacenes.     

Structures of urea/thiourea 1,3-disubstituted thia[4]calixarenes and corresponding monofunctional receptors and their anion recognition properties

Two thiacalix[4]arenes in 1,3-alternate conformation functionalized by two (CH₂)₂NH(C=X)NHC₆H₄-NO₂-p groups (X = S,O) as well as two related monofunctional receptors MeO(CH₂)₂NH(C=X)NHC₆H₄-NO₂-p were prepared and characterized by X-ray crystal structures. The thioureido and ureido derivatives have E,Z and E,E conformations respectively both in monofunctional receptors and thiacalixarenes. The thiacalixarene attached thiourea groups are well separated from each other, but respective urea groups are much closer to each other and have mutual parallel orientation making the bisurea derivative a better preorganized receptor as compared to bisthiourea. Binding of Cl^?, F^?, H₂PO₄ ^? and AcO^? anions in chloroform and DMSO was studied by spectrophotometric and NMR titrations. In chloroform both bisurea and bisthiourea thiacalix[4]arenes bind anions 3–5 times stronger than corresponding monofunctional compounds in spite of better preorganization of the urea derivative. In DMSO simultaneous deprotonation of ureido NH groups of receptors and hydrogen bonding reactions are observed. Deprotonation by H₂PO₄ ^? is accompanied by a strong association between liberated H₃PO₄ and H₂PO₄ ^? (log K = 3.9). For hydrogen bonding associations the binding constants of H₂PO₄ ^? and AcO^? with bisurea thiacalixarene are up to two orders of magnitude larger than those with corresponding monofunctional receptor, but with bisthiourea thiacalixarene the effect is less than two-fold. Thus in this solvent in contrast to chloroform the preorganization is an important factor.     

A novel, simple, colorimetric receptor based on 2′,4′-dinitrophenylhydrazone for acetate ion in organic medium

A novel 1,3-di(2′,4′-dinitrophenylhydrazone)-5-nitrobenzene receptor has been synthesized by simple steps with good yields. The anion recognition properties were studied by ultraviolet-visible (UV-Vis) spectroscopy. The results showed that the receptor had a higher affinity to F^?, CH₃COO^? and H₂PO ₄ ^? , but no evident binding with Cl^?, Br^?, and I^?. Upon addition of the three former anions to the receptors in dimethyl sulphoxide (DMSO) at 298.2 ± 0.1 K, the solution exhibited an obvious color change from yellow to mauve that could be observed by the naked eye, thus the receptor could act as a fluoride ion sensor even in the presence of other halide ions. The UV-Vis data indicates that a 1:1 stoichiometry complex formed through hydrogen-bonding interactions between receptor and anions. The hydrogen bond between phenylhydrazone –NH and acetate or fluoride anion was determined on the basis of ¹H nuclear magnetic resonance (NMR) experiments.     

Tunability of anion binding strength based on acyl-thiourea receptors containing isatin group

Some acyl-thiourea derivatives containing isatin group were synthesized and their interactions with anions were investigated using UV–vis spectroscopy and ¹H NMR titrations in DMSO and DMSO-d₆, respectively. These compounds have a same molecular framework, functionalising with different groups lead to different anion binding strength of these receptors. Receptor 1 showed a higher binding affinity for AcO⁻ than for F⁻, due to the cooperative multiple hydrogen bond interactions of AcO⁻ with the acyl-thiourea group and N–H group in the indole unit of receptor 1. Displacing the N–H proton in the indole unit with –CH₃ group, receptor 2 showed no obviously discriminative responses for F⁻, AcO⁻ and H₂PO₄⁻ due to lack of such additional binding. In the case of receptor 3, which was functionalised with strong electron-withdrawing group, it showed selectively chromogenic response for F⁻ based on double deprotonation of the receptor in DMSO, whereas AcO⁻ and H₂PO₄⁻ induced single deprotonation only.     

基于含偶氮酚羟基席夫碱新型简单比色传感器

A novel N-(2-hydroxy-5-chlorodibenzophenone)-N0-[2-hydroxy-5-azophenyl-benzaldehyde]-1,2-diaminobenzene receptor has been synthesized by simple steps with good yields. The anion recognition properties were studied by ultraviolet-visible spectroscopy. The resultsshowed that the receptor had a higher affinity to F^-, AcO^-, and H₂PO₄^-, but no evident binding with Cl^-, Br^-, and I^-. Upon addition of the three former anions to the receptors in DMSO, the solution exhibited an obvious color change from colorless to yellow, which could be observed by the naked eye, thus the receptor could act as a fluoride ion sensor even in the presence of other halide ions. The UV-Vis data indicates that a 1:1 stoichiometric complex is formed through hydrogen bonding interactions between receptor and anions.     

Simple indole-based colorimetric sensors with electron-withdrawing chromophores: Tuning selectivity in anion sensing

Three simple colorimetric anion sensors (1, 2, and 3) containing anthrone, 1,3-indanedione, and malononitrile as signaling chromophores and an indole binding site have been designed and synthesized. The introduction of electron-withdrawing groups can not only provide chromogenic signal output, but also tune the sensitivity and selectivity of indole-based anion sensors by electron push–pull features. Their anion binding and sensing properties were investigated in detail by dramatic color changes, UV–vis absorption, and ¹H NMR. As results revealed, sensor 1 showed high selectivity for F⁻ over AcO⁻ and H₂PO₄⁻ with a distinct change in color due to the deprotonation of indole NH group. The excellent selectivity of 1 for F⁻ can be attributed to the fitness in the acidity of its NH-group, which is tuned to be able to distinguish the subtle difference in the affinity of F⁻, AcO⁻, and H₂PO₄⁻ to NH proton.     

Synthesis of Schiff Base Bearing Phenolic Hydroxy Group and Its Anion Recognition

A new anion receptor bearing phenolic hydroxy group based on 3,5-ditertbutylsalicylaldehyde-p-nitrophenylhydrazone (1) was designed and synthesized. Upon addition of AcO^- and F^-, the receptor exhibited visible color changes from deep yellow to purple. However, no obvious color changes were observed on addition of the other anions tested (H₂PO₄^-, Cl^-, Br^-, I^-). The binding properties of the receptor with anions such as AcO^- and F^- were investigated by UV-Vis and fluorescent titrations. The result indicated that the receptor 1 had a higher affinity to AcO^- and F^- and a 1:1 host-guest complex was formed through H-bond interactions between 1 and anions.     

A novel anion receptor employing the pyrrole and amide moieties in the cooperative binding of anions

A novel anion receptor 1 based on pyrrole and amide moieties was designed, synthesized and characterized by X-ray crystallography, ¹H NMR, ESI-MS and so on. Its anions (such as AcO^?, F^?, Cl^? and H₂PO₄ ^?) binding properties was studied in detail by the ¹H NMR titrations in DMSO-d ₆ .     

Synthesis of a Phenylhydrazone‐based Colorimetric Anion Sensor with Complementary IMP/INH Logic Functions

A dinitrophenyl hydrazone colorimetric anion sensor (receptor 1 ) was synthesized and its recognition properties towards various anions were investigated by naked eye observation and spectroscopic methods, namely UV‐vis and ¹H NMR titrations in DMSO. The addition of AcO^?, F^? and H₂PO₄^? to receptor 1 resulted in marked red shift of the charge‐transfer absorbance band (Δλ=91 nm, 407 nm to 498 nm) concomitant with a 'naked‐eye' detectable colour change from yellow to pink. However, both the colour and spectral changes were reversible by the addition of cations (M^II) of 3d^5‐10 as well as Cd^II, Hg^II, Mg^II and Ca^II. Subsequently, complementary IMP/INH logic functions based on colour and spectral switching (ON/OFF) were affirmed. The sensor can, thus be utilized as a colorimetric molecular switch modulated by F^?/M^II.     

Pyrrole-based tetra-amide for hydrogen pyrophosphate (HP2O73−) and F− ions in sol-gel medium

A simple pyrrole-based tetra-amide 1 shows selective fluorescence sensing of HP₂O₇^3? over a series of other anions in CH₃CN by exhibiting excimer emission at ~450 nm. In DMSO:CHCl₃ (1:5 v/v), compound 1 forms gel that undergoes disintegration to sol in the presence of basic anions such as F^?, AcO^? and H₂PO₄^?. However, the gel state of 1 under a particular condition is observed to be selective to F^? over AcO^? and H₂PO₄^? anions. The recognition properties of the receptor have been studied by fluorescence, UV–vis and ¹H NMR spectroscopic methods.     

Novel Fluorescent Chemosensor for Detection of F− Anions Based on a Single Functionalized Pillar[5]arene Iron(III) Complex

Novel fluorescent chemosensor with good selectivity for F^? anion was designed and synthesized. The sensor has a bearing on a single functionalized pillar[5]arene and Fe³⁺ metal complex (PN‐Fe), which showed prominent fluorescent response for F^? anion over other common anions (Cl^?, Br^?, I^?, AcO^?, HSO4^?, H₂PO₄^?, ClO₄^?, CN^? and SCN^?). These results were evaluated by fluorescent method. The detection limit of PN‐Fe to F^? was calculated to be 2.50×10^?7 mol/L. Moreover, the sensor PN‐Fe³⁺ might serve as a recyclable component in sensing materials.     

Nitrate Anion Recognition in Organic–Aqueous Solvent Mixtures by a Bis(triazolium)acridine‐Containing [2]Rotaxane

The synthesis of a novel [2]rotaxane host system containing a bis(triazolium)acridine‐based axle component is reported. ¹H NMR anion‐binding titrations reveal that the rotaxane is able to recognise selectively the NO₃^? anion over a range of more basic oxoanions (AcO^?, HCO₃^? and H₂PO₄^?) in a competitive organic–aqueous solvent mixture.     

Colorimetric anion chemosensor based on 2-aminobenzimidazole: naked-eye detection of biologically important anions

We synthesized a novel colorimetric anion chemosensor bearing benzimidazole motifs as recognition sites in the pods of the receptor. The addition of tetrabutylammonium salts of F⁻ or AcO⁻ to the solution of receptor caused dramatic color changes from colorless to yellow, which was clearly visible to the naked eye. The receptor showed no significant changes on addition of other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, and H₂PO₄⁻.     

Determination Limit of Fluorescence Turn‐On Probes for the Acetate Anion

Three fluorescent turn‐on probes containing 3,6‐dichloro‐9H‐carbazole as carbazyl part have been designed and synthesized. Among studied anions F^?, AcO^?, H₂PO , Cl^?, Br^? and I^?, AcO^? showed the strongest binding ability with all probes. The strong basic anions, such as AcO^?, H₂PO , and F^?, induced a significant red‐shift in absorption and a concomitant increase in fluorescent emission of the probes caused by photoinduced electron transfer (PET). The determination limit of probe 3 (Scheme 1) toward AcO^? is 3.0×10^?7 M . ¹H‐NMR Titration experiments shed light on the nature of the interaction between the probes and the anions. Theoretical investigation further illustrated the possible binding mode in these host? guest interactions and the roles of molecular frontier orbitals in molecular interplay.