Electrochemical behavior of nanocrystalline diamond thin films grown in electrical arc plasma

Nitrogenated nanocrystalline diamond films with controlled electrical conductivity are grown in electrical arc plasma in CH₄/H₂/Ar/N₂ gas mixtures and characterized by scanning electron microscopy and spectroscopic measurements. Their electrochemical properties are studied by electrochemical impedance spectroscopy. Transfer coefficients of reactions in the [Fe(CN)₆]^3−/4− redox system are determined. The electrochemical behavior of the material is controlled by its nitrogenation (3–20% N₂ in the reaction gas mixture). The nitrogenated nanocrystalline diamond has higher differential capacitance in indifferent electrolyte (1 M KCl) solution than not nitrogenated one; the nitrogenation also increases the reversibility of reactions in the [Fe(CN)₆]^3−/4− redox system. By and large, with nitrogenation of diamond, its electrochemical behavior changes from the one characteristic of a “poor conductor” to that characteristic of metallike conductor. In this respect the nanocrystalline diamond electrodes grown in the electrical arc plasma are similar to those grown in microwave plasma.     

Synthesis of the penta-glutamyl derivative of N-[4-[N-[3-(2,4-diamino-1,6-dihydro-6-oxo-5-pyrimidinyl)-propyl]amino]benzoyl]-L-glutamic acid (5-DACTHF). An acyclic analogue of tetrahydrofolic acid

The penta-glutamyl derivative of N-[4-[N-[3-(2,4-diamino-1,6-dihydro-6-oxo-5-pyrimidinyl)propyl]amino]-benzoyl)-L-glutamic acid (1, 5-DACTHF, 543U76) was synthesized by a convergent route. L-γ-Glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-glutamic acid heptakis t-butyl ester ( 20 ) was prepared in ten steps from L-glutamic acid di-t-butyl ester and N-(benzyloxycarbonyl)-L-glutamic acid α-t-butyl ester. 4-[N-[3-(2,4-Diamino-1,6-dihydro-6-oxo-5-pyrimidinyl)propyl]trifluoroacetamido]benzoic acid ( 6 ), which was synthesized from pyrimidinylpropionaldehyde 3 in three steps, was condensed with 20 , followed by deprotection to provide N-[4-[N-[3-(2,4-diamino-1,6-dihydro-6-oxo-5-pyrimidinyl)propyl]amino]benzoyl]-L-γ-glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-γ-glutamyl-L-glutamic acid ( 2 ). Hexaglutamate 2 is a potent inhibitor of glycinamide ribonucleotide transformylase.     

Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

Enhanced photovoltaic performance of quasi-solid-state dye-sensitized solar cells via incorporating quaternized ammonium iodide-containing conjugated polymer into PEO gel electrolytes

In this study, a series of gel electrolytes prepared from blends of alternating conjugated polymer electrolytes (CPEs)/poly(ethylene oxide) (PEO) were developed for use in quasi-solid-state dye-sensitized solar cells (DSSCs). The alternating CPEs poly[(N-(3′-((N,N-dimethyl)-N-ethylammonium)propyl)-3,6-carbazole)-alt-(9,9-dioctyl-2,7-fluorene)]diiodide, poly[(N-(3′-((N,N-dimethyl)-N-ethylammonium)propyl)-3,6-carbazole)-alt-(9,9-bis(2-(2-methoxyethoxy)ethyl)-2,7-fluorene)]diiodide (MPCFO-E), and poly[(N-(3′-((N,N-dimethyl)-N-ethylammonium)propyl)-3,6-carbazole)-alt-(siloxane substituted-2,7-fluorene)]diiodide (MPCFS-E) were synthesized through copolymerization of carbazole units (featuring quaternized ammonium iodide groups) and fluorene units featuring flexible side chains (9,9-dioctylfluorene, ethylene oxide-substituted fluorene, and siloxane-substituted fluorene, respectively). The MPCFO-E/PEO-based and MPCFS-E/PEO-based DSSCs exhibited lower electrochemical resistances, superior photovoltaic (PV) properties, and improved PV stabilities relative to those of the corresponding PEO-based DSSC. Among the studied systems, the DSSC based on the MPCFO-E (0.5 wt.%)/PEO blend electrolyte exhibited the best PV performance, with a short current density of 4.97 mA cm⁻² and a photoenergy conversion efficiency of 1.17%.     

含氰基基团的以C为中心的不对称阴离子离子液体的合成、表征及应用

首次通过不对称阴离子的钠盐/钾盐和不同的季胺化的咪唑,吡咯溴盐/氯盐进行离子交换,合成了一系列含氰基官能团的不对称阴离子功能化离子液体。通过红外、核磁共振、质谱和元素分析对离子液体的结构进行表征;通过TGA对离子液体的热稳定性进行测定,结果发现不对称功能化离子液体具有良好的热稳定性,其分解温度在219-319℃范围内。将功能化离子液体[Bmim][C(CN)2COCH3]作为弱配体应用于模型的Suzuki偶联反应,发现在反应中加入功能化离子液体[Bmim][C(CN)2COCH3]可以使反应收率提高10-15%。     

Mimicking the behaviour of rigid rod molecules. Smectic H liquid crystals from amphiphilic quaternary ammonium salts

The effect of secondary hydrogen-bonding interactions on the crystalline and liquid crystalline phases of quaternary ammonium salts functionalised with a carboxylic group attached at the polar head through a decyl spacer of a homologous series of N-alkyl-N-carboxydecyl-N,N-dimethylammonium bromides was investigated by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. The low-temperature crystal phases were found to have a lamellar structure in which the ammonium bromide groups are arranged within the layers in two distinct planes, alternately separated by single layers of alkyl chains and double layers of carboxydecyl chains coupled through the carboxyl end groups. At higher temperatures, although these molecules were made from soft flexible chains, smectic H mesophases were identified. The smectic layers were found to be formed by the same two ionic planes alternately separated by the alkyl and carboxydecyl sub-layers. The smectic structure was compared with the three-dimensional positional order observed in the smectic T phase of dihydroxyl functionalised quaternary ammonium salts already described in the literature.     

Electrodes of strongly nitrogenated nanocrystalline diamond

Electrochemical behavior of nanocrystalline diamond films grown in microwave plasma initiated in Ar-CH₄-H₂-N₂ mixtures containing 30 to 90 vol % N₂ is studied. Thin-film nanocrystalline-diamond electrodes grown at this high (30 to 90 vol %) N₂ content in reactor behave as nearly metal-like: reaction in the [Fe(CN)₆]^3−/4− redox couple proceeds in a reversible manner. Generally, with the increasing of the N₂ content in the reactor the electrochemical behavior of a “poor conductor” gives place to the metal-like one; in a sense, the material’s electrochemical activity saturates and does not change beyond some critical value of the N₂ content (∼30 vol %). This conclusion is substantiated by the study of Raman spectra of the nanocrystalline diamond films: at this N₂ content the diamond-graphite structure of the material is stabilized.     

Tri­azido­cobalt(III) complexes with tridentate amine ligands

The title compounds, [N‐(2‐amino­ethyl)‐1,3‐propane­di­amine‐κ³N]­tri­azido­cobalt(III), [Co(N₃)₃(C₅H₁₅N₃)], [N‐(2‐amino­ethyl)‐N‐methyl‐1,3‐propane­di­amine‐κ³N]­tri­azido­cobalt(III), [Co(N₃)₃(C₆H₁₇N₃)], [N‐(2‐amino­propyl)‐1,3‐pro­pane­di­am­ine‐κ³N]­tri­azido­cobalt(III), [Co(N₃)₃(C₆H₁₇N₃)], and [N‐(2‐amino­propyl)‐N‐methyl‐1,3‐pro­pane­di­am­ine‐κ³N]triazidocobalt(III), [Co(N₃)₃­(C₇­H₁₉­N₃)], each consist of a Co^III atom, three azide ligands in a meridional configuration and a tridentate amine ligand, namely aepn [N‐(2‐amino­ethyl)‐1,3‐propane­di­amine] or dpt [N‐(3‐amino­propyl)‐1,3‐pro­pane­di­amine], or their N‐methyl­­ated analogs.     

Synthesis,structural and conformational study of N-β(or γ)-acyloxyalkylnortropinones

A series of N-β(γ)-acyloxyalkylnortropinones have been synthesized and studied by ¹H and ¹³C nmr spectroscopy, and the crystal structure of N-[γ-(p-chlorophenylcarbonyloxy)propyl]nortropinone 4 has been determined by X-ray diffraction. The compounds studied display in deuteriochloroform solution the same preferred conformation. The pyrrolidine and piperidone rings adopt a flattened N-8 envelope and distorted chair conformation, puckered at N-8 and flattened at C-3 respectively, with the N-substituent in axial position with respect to the piperidone ring. These results are in close agreement with that found for compound 4 in the crystalline state.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL DOPANT (C3-ABSA) FOR SYNTHESIZING TUBULAR POLYANILINE*

 4-(3-(4-((4-Nitrophenyl)azo)phenyloxy)propyl)aminobenzene sulfonic acid (C3-ABSA) was synthesized by the reaction of 3-bromide-l-(4-((4-nitrophenyl)azo)phenyloxy)propane (B3) with sodium p-aminobenzene sulfonic acid (ABSA)and acidification with hydrochloric acid. The C3-ABSA was characterized by FTIR, ¹H-NMR and second ion mass spectrum (SIMS). The molecular formula of dehydrated C3-ABSA was estimated to be ca. C_{21H20O6N4S by SIMS. Its decomposition temperature was measured by TGA to be ca. 232℃. It was found that tubular polyaniline (PANI) with a conductivity of 1.1 S/cm at room temperature was successfully synthesized by in-situ doping polymerization in the presence of C3-ABSA as a dopant.}     

Synthesis and nematicidal activities of 1,2,3-benzotriazin-4-one containing 4,5-dihydrothiazole-2-thiol derivatives against Meloidogyne incognita

Abstract

A series of novel 1,2,3-benzotriazin-4-one derivatives containing 4,5-dihydrothiazole-2-thiol were synthesized and characterized by ¹H NMR, ¹³C NMR, ¹⁹F NMR and HRMS. The bioassay results showed that compounds 3-(3-((4,5-dihydrothiazol-2-yl)thio)propyl)-7-methoxybenzo[d][1–3]triazin-4(3H)-one, 3-(3-((4,5-dihydrothiazol-2-yl)thio)propyl)-6-nitrobenzo[d][1–3]triazin-4(3H)-one, 7-chloro-3-(3-((4,5-dihydrothiazol-2-yl)thio)propyl)benzo[d][1–3]triazin-4(3H)-one exhibited good control efficacy against the cucumber root-knot nematode disease caused by Meloidogyne incognita at the concentration of 10.0?mg L^?1 in vivo. Compound 7-chloro-3-(3-((4,5-dihydrothiazol-2-yl)thio)propyl)benzo[d][1–3]triazin-4(3H)-one showed excellent nematicidal activity with inhibition 68.3% at a concentration of 1.0?mg L^?1. It suggested that the structure of 1,2,3-benzotriazin-4-one containing 4,5-dihydro-thiazole-2-thiol could be optimized further.     

Deposition and characterisation of a porous Sn(IV) semiconductor nanofilm on boron-doped diamond

Nanofilm deposits of a porous Sn(IV) oxide are formed by anodic electrodeposition on a polished boron-doped diamond electrode immersed in an aqueous Sn²⁺ solution. Mechanically and electrochemically stable deposits of 10–15 nm thickness are formed irrespective of the Sn²⁺ concentration and mass-transport enhancement by power ultrasound. Atomic force microscopy images indicate the presence of a smooth and noncrystalline film, which is stable under ambient conditions. n-type semiconducting characteristics are observed for the aqueous solution redox couples Fe(CN)₆ ^3–/4– and Ru(NH₃)₆ ^3+/2+. However, preliminary results from voltammetric experiments indicate that the small and neutral organic molecule N,N,N′,N′-tetramethylphenylenediamine is able to diffuse through the porous film to undergo oxidation directly at the surface of the boron-doped diamond electrode. Electronic Publication     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Cocrystals of 6‐propyl‐2‐thiouracil: N—H...O versus N—H...S hydrogen bonds

In order to investigate the relative stability of N—H...O and N—H...S hydrogen bonds, we cocrystallized the antithyroid drug 6‐propyl‐2‐thiouracil with two complementary heterocycles. In the cocrystal pyrimidin‐2‐amine–6‐propyl‐2‐thiouracil (1/2), C₄H₅N₃·2C₇H₁₀N₂OS, (I), the `base pair' is connected by one N—H...S and one N—H...N hydrogen bond. Homodimers of 6‐propyl‐2‐thiouracil linked by two N—H...S hydrogen bonds are observed in the cocrystal N‐(6‐acetamidopyridin‐2‐yl)acetamide–6‐propyl‐2‐thiouracil (1/2), C₉H₁₁N₃O₂·2C₇H₁₀N₂OS, (II). The crystal structure of 6‐propyl‐2‐thiouracil itself, C₇H₁₀N₂OS, (III), is stabilized by pairwise N—H...O and N—H...S hydrogen bonds. In all three structures, N—H...S hydrogen bonds occur only within R₂²(8) patterns, whereas N—H...O hydrogen bonds tend to connect the homo‐ and heterodimers into extended networks. In agreement with related structures, the hydrogen‐bonding capability of C=O and C=S groups seems to be comparable.     

A two‐dimensional copper(II) coordination polymer based on 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid

Single‐crystal X‐ray diffraction analysis of poly[bis(μ₂‐5‐carboxy‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:O⁵)copper(II)], [Cu(C₈H₉N₂O₄)₂)]_n, indicates that one carboxylic acid group of the 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PDI) ligand is deprotonated. The resulting H₂PDI⁻ anion, acting as a bridge, connects the Cu^II cations to form a two‐dimensional (4,4)‐connected layer. Adjacent layers are further linked through interlayer hydrogen‐bond interactions, resulting in a three‐dimensional supramolecular structure.     

Behavior of double stimuli-responsive copolymer of N-(3-(diethylamino) propyl)-N-methylacrylamide and N,N–diethylacrylamide in aqueous solutions

Double stimuli-responsive copolymer of N-(3-(diethylamino)propyl)-N-methylacrylamide and N,N-diethylacrylamide (molar mass M ≈ 32,000?g?mol^?1) in buffer solutions was studied by the static and dynamic light scattering and turbidimetry. The experiments were performed within pH interval from 7 to 13 and in a wide concentration range. Two types of scattering species were observed in solutions of all concentrations and pH at room temperatures. They were macromolecular unimers and loose aggregates. The increase in concentration and pH led to decrease in phase separation temperatures and width of phase transition.     

[N,N′‐Bis(3‐aminopropyl)ethylenediamine‐κ4N,N′,N′′,N′′′](trithiocyanurato‐κ2N,S)zinc(II) ethanol solvate

In the crystal structure of the title compound, [N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine‐κ⁴N,N′,N′′,N′′′][1,3,5‐triazine‐2,4,6(1H,3H,5H)‐tri­thionato(2−)‐κ²N,S]­zinc(II) ethanol sol­vate, [Zn(C₈H₂₂N₄)₂(C₃HN₃S₃)]·C₂H₆O, the Zn^II atom is octa­hedrally coordinated by four N atoms [Zn—N = 2.104 (2)–2.203 (2) Å] of a tetradentate N‐donor N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine (bapen) ligand and by two S and N atoms [Zn—S = 2.5700 (7) Å and Zn—N = 2.313 (2) Å] of a tri­thio­cyanurate(2−) (ttcH²⁻) dianion bonded as a bidentate ligand in a cis configuration. The crystal structure of the compound is stabilized by a network of hydrogen bonds.     

Two-fragment α-adrenolytics

A method for the synthesis of hypotensive alkyl(phenyl)[ω-(N-phenylpiperazino)alkyl]-phosphine oxides by reacting alkyl(ω-haloalkyl)phenylphosphine oxides withN-phenylpiperazine was elaborated. Phenyl[γ-(N-phenylpiperazino)propyl]propylphosphine oxide reacts with alkyl halides to give [γ-(N-alkyl-N′-phenylpiperazinio)propyl]phenyl(propyl)oxophosphine halides. For Part 1 see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 488–492, March, 2000.     

Multi-functional zwitterionic compounds as additives for lithium battery electrolytes

A series of multi-functional zwitterionic compounds having both ester and sulfonate groups were synthesized and their electrochemical properties were investigated. The effect of added zwitterionic compounds on the cycling performance of the cell containing 1 M LiPF₆ in EC, DMC, and EMC (1/1/1 by vol.) was also examined. The cell capacity was not varied much at 1/5 C up to 50 cycles with the addition of either 2.25 wt% N-methylpyrrolidinium-N-(propyl sulfonate) (MePyS) or N-methylpiperidinium-N-(propyl sulfonate) (MePipS) as an additive, but dropped significantly at higher C rate of 1 C. Such a sharp decrease of the performance at higher C rate was not observed when MePyS or MePipS was replaced by N-(2-acetoxyethyl) pyrrolidinium-N-(propyl sulfonate) (EsPyS) or N-(2-acetoxyethyl) piperidinium-N-(propyl sulfonate) (EsPipS), implying the positive role of the ester functional group.FT-IR study clearly demonstrates that ester-containing zwitterionic compounds are able to interact with Li⁺ ions through both sulfonate and ester functional groups.