Comparison of gas chromatographic and gas chromatographic/mass spectrometric techniques for the analysis of TNT and related nitroaromatic compounds

The use of capillary column gas chromatography and gas chromatography/mass spectrometry for the analysis of a series of standard solutions (0.1 to 10 μg/ml) of 2,4,6-trinitrotoluene (TNT) and eight other nitroaromatic components was evaluated. The techniques included gas chromatography with electron capture detection (GC/ECD), full scan and selected ion monitoring gas chromatography/mass spectrometry with electron impact ionization (EI/FS and EI/SIM), full scan and selected ion monitoring gas chromatography/mass spectrometry with positive ion chemical ionization using methane reagent gas (PICI/FS and PICI/SIM), and full scan and selected ion monitoring gas chromatography/mass spectrometry with negative ion chemical ionization using methane reagent gas (NICI/FS and NICI/SIM). The performance of the techniques was comapared by determining the linear response range, precision, and detection limits of the analyses.     

Trace level determination of phenols as pentafluorobenzyl derivatives by gas chromatography-negative-ion chemical ionization mass spectrometry.

A method for the trace level determination of 11 phenols as pentafluorobenzyl (PFB) derivatives by gas chromatography-mass spectrometry (GC-MS) with negative-ion chemical ionization (NICI) is described. First, the conditions for the PFB derivatisation of phenols were optimized and were found to be reaction temperature 80 degrees C and reaction time 5 h. Second, the detection limits using selected ion monitoring (SIM) were compared between trimethylsilylated (TMS) derivatives in the electron ionization (EI) mode and PFB derivatives in the NICI mode. The responses for the PFB derivatives in the NICI mode were 3.3-61 times higher than those of the TMS derivatives in the EI mode. The instrumental detection limits using NICI-SIM ranged from 2.6 to 290 fg. This method was applied to the analysis of phenols in river water using solid-phase extraction. The recoveries of the phenols from a river water sample spiked with standards at 100 ng l-1 with 2-chlorophenol, 4-chloro-3-methylphenol and pentachlorophenol and at 1000 ng l-1 with phenol, 2,4-dimethylphenol, 2,4-dichlorophenol, 2-nitrophenol, 2,4,6-trichlorophenol and 4-nitrophenol were 81.2-106.3% (RSD 5.1-8.0%), except for 2-methyl-4,6-dinitrophenol and 2,4-dinitrophenol, for which the recoveries were 5.8 and 4.2%, respectively, because water contained in the acetone eluate interfered with the derivatisation of these compounds with two electrophilic nitro groups.     

Analysis of triacetone triperoxide by gas chromatography/mass spectrometry and gas chromatography/tandem mass spectrometry by electron and chemical ionization

The explosive triacetone triperoxide (TATP) has been analyzed by gas chromatography/mass spectrometry (GC/MS) and sub-nanogram detection limits are reported by ammonia positive ion chemical ionization (PICI), electron ionization (EI) and methane negative ion chemical ionization (NICI). Analysis by methane PICI and ammonia NICI gave detection limits in the low nanogram range. Analyses were carried out on (linear) quadrupole and ion trap instruments. Analysis of TATP by PICI using ammonia reagent gas is the preferred analytical method, producing low limits of detection as well as an abundant (greater than 60% of base peak) diagnostic adduct ion at m/z 240 corresponding to [TATP + NH4]+. Isolation of the [TATP + NH4]+ ion with subsequent collision-induced dissociation (CID) produces extremely low abundance product ions at m/z values greater than 60, and the m/z 223 ion corresponding to [TATP + H]+ was not observed. Density functional theory (DFT) calculations at the B88LYP/DVZP level indicate that dissociation of the complex to form NH4+ and TATP occurs at energies lower than peroxide bond dissociation, while protonation of TATP leads to cleavage of the ring structure. These results provide a method for pico-gram detection levels of TATP using commercial instrumentation commonly available in forensic laboratories. As a point of comparison, a detection limit of 15 ng was obtained by flame ionization detection.     

Selective determination of organophosphate flame retardants and plasticizers in indoor air by gas chromatography, positive-ion chemical ionization and collision-induced dissociation mass spectrometry

Gas chromatography/ion trap mass spectrometry with in-source ionization and dissociation was used in positive-ion chemical ionization (PICI) mode for the determination of organophosphate triesters in indoor air. These compounds are widely used as additive flame retardants and plasticizers in different types of materials and have become ubiquitous pollutants in indoor environments. When using collision-induced dissociation in PICI mode the fragmentation of the organophosphate triesters can be performed in a more controllable way than in electron ionization (EI) mode. The developed selected-reaction monitoring method provided high selectivity for the investigated compounds. For 8-h air measurements (corresponding to 1.5 m3 of sampled air) the limit of detection of the method was determined to be in the range 0.1-1.4 ng m(-3), which is comparable with nitrogen-phosphorus detection and about 50-fold lower than when using EI in selected-ion monitoring mode. The presented method was applied to samples from three common indoor environments, in which a number of organophosphate triesters were identified and quantified. The dominating compound was found to be tris(2-chloropropyl) phosphate, which occurred at levels up to 0.8 microg m(-3).     

Determination of estrogens in river water by gas chromatography-negative-ion chemical-ionization mass spectrometry.

A method for the determination of estrogens (17alpha-estradiol, 17beta-estradiol, estrone, ethynyl estradiol, and estriol) as pentafluorobenzyl-trimethylsilyl (PFB-TMS) derivatives by gas chromatography-mass spectrometry (GC-MS) with negative-ion chemical-ionization (NICI) is described. The NICI of all the derivatives produced an intense [M-PFB]- ion as the base peak. The reagent gas (methane) flow-rate and the ion source temperature were determined to be 2.0 ml/min and 240 degrees C, respectively, for the optimized NICI-selected ion monitoring (SIM) conditions. The sensitivities of the PFB-TMS derivatives in the NICI mode were 8.0-130 times higher than those of the PFB-TMS derivatives in electron ionization (EI) mode, and 12-25 times higher than those of all the TMS derivatives in the EI mode. This method was applied to the analysis of estrogens in river water using a solid-phase extraction as the sample preparation. The recoveries of the target chemicals from a river-water sample spiked with standards at 2 ng/l level were 85.8-126.5% (RSD, 6.2-13.0%). The methodical detection limits ranged from 0.10 to 0.28 ng/l.     

Gas chromatography-mass spectrometry with supersonic molecular beams

Gas chromatography-mass spectrometry (GC-MS) with supersonic molecular beams (SMBs) (also named Supersonic GC-MS) is based on GC and MS interface with SMBs and on the electron ionization (EI) of vibrationally cold analytes in the SMBs (cold EI) in a fly-through ion source. This ion source is inherently inert and further characterized by fast response and vacuum background filtration capability. The same ion source offers three modes of ionization including cold EI, classical EI and cluster chemical ionization (CI). Cold EI, as a main mode, provides enhanced molecular ions combined with an effective library sample identification, which is supplemented and complemented by a powerful isotope abundance analysis method and software. The range of low-volatility and thermally labile compounds amenable for analysis is significantly increased owing to the use of the contact-free, fly-through ion source and the ability to lower sample elution temperatures through the use of high column carrier gas flow rates. Effective, fast GC-MS is enabled particularly owing to the possible use of high column flow rates and improved system selectivity in view of the enhancement of the molecular ion. This fast GC-MS with SMB can be further improved via the added selectivity of MS-MS, which by itself benefits from the enhancement of the molecular ion, the most suitable parent ion for MS-MS. Supersonic GC-MS is characterized by low limits of detection (LOD), and its sensitivity is superior to that of standard GC-MS, particularly for samples that are hard for analysis. The GC separation of the Supersonic GC-MS can be improved with pulsed flow modulation (PFM) GC x GC-MS. Electron ionization LC-MS with SMB can also be combined with the Supersonic GC-MS, with fast and easy switching between these two modes of operation.     

Gas chromatography negative ion chemical ionization mass spectrometry: application to the detection of alkyl nitrates and halocarbons in the atmosphere

Alkyl nitrates and very short-lived halocarbon species are important atmospheric trace gas species that are present in the low to sub parts per trillion concentration range. This presents an analytical challenge for their detection and quantification that requires instrumentation with high sensitivity and selectivity. In this paper, we present a new in situ gas chromatograph negative ion chemical ionization mass spectrometer (GC/NICI-MS) coupled to a non-cryogen sample pre-concentration system. This instrument, with detection limits of <0.01 ppt, is capable of detecting and quantifying a large suite of alkyl nitrate and halocarbon species with high sensitivity and precision. The effects of ion source temperature and reagent gas pressure on the ionization efficiency of the NICI mode are investigated and the results are used to optimize the sensitivity. The NICI mode is compared to the more frequently used electron impact (EI) ionization and the enhancements in sensitivity are presented for all the calibrated compounds.     

Compatibility of electron ionization and soft ionization methods in gas chromatography/orthogonal time‐of‐flight mass spectrometry

Orthogonal acceleration time‐of‐flight (oa‐TOF) mass spectrometry (MS) was coupled to gas chromatography (GC) to measure ion yields (ratio of ion counts to number of neutrals entering the ion source) and signal‐to‐noise (S/N) in the electron ionization (EI) mode (hard ionization) as well as in the soft ionization modes of chemical ionization (CI), electron capture negative ion chemical ionization (NICI) and field ionization (FI). Mass accuracies of the EI and FI modes were also investigated. Sixteen structurally diverse volatile organic compounds were chosen for this study. The oa‐TOF mass analyzer is highly suited for FI MS and provided an opportunity to compare the sensitivity of this ionization method to the more conventional ionization methods. Compared to the widely used quadrupole mass filter, the oa‐TOF platform offers significantly greater mass accuracy and therefore the possibility of determining the empirical formula of analytes. The findings of this study showed that, for the instrument used, EI generated the most ions with the exception of compounds able to form negative ions readily. Lower ion yields in the FI mode were generally observed but the chromatograms displayed greater S/N and in many cases gave spectra dominated by a molecular ion. Ion counts in CI are limited by the very small apertures required to maintain sufficiently high pressures in the ionization chamber. Mass accuracy for molecular and fragment ions was attainable at close to manufacturer's specifications, thus providing useful information on molecular ions and neutral losses. The data presented also suggests a potentially useful instrumental combination would result if EI and FI spectra could be collected simultaneously or in alternate scans during GC/MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Identifizierung einiger Sprengstoffe mit Hilfe spezieller GC/MS-Techniken, insbesondere der PPNICI-Methode

Zusammenfassung Zwölf repräsentative Sprengstoffe wurden gas-chromatographisch/massenspektrometrisch mit Hilfe verschiedener Ionisierungsmethoden (EI; CI) und Reaktandgase (Methan, Isobutan, Ammoniak) untersucht; neben der PICI (positive ion CI) gelangte dabei die NICI (negative ion CI) zur Anwendung. Bei den nicht gas-chromatographierbaren Verbindungen erfolgte die Probenzuführung über den Direkteinlaß (DE).Die elektronenstoßinduzierte Fragmentierung der Verbindungen führte im allgemeinen zu nur bedingt aussagekräftigen Spektren, die den Einsatz der CI erforderten.Von den getesteten Reaktandgasen erwies sich Isobutan (für die PICI) als am geeignetsten; die CI-Spektren zeigten einige für die Analytik interessante Besonderheiten, wie Dimerisierungen, Adduktbildungen und das Auftreten von Ionen, deren Genese aus dem Probenmaterial nicht schlüssig erklärt werden kann.Das Reaktandgas Ammoniak bietet bei der Analyse einiger der Verbindungen gewissen Vorteile (intensiveres Quasimolekülion), wie auch der Einsatz der NICI: so bedingt die Unterdrückung der Ionisation von Störsubstanzen in der Probensubstanz eine, wenn auch geringfügige, Steigerung der Empfindlichkeit gegenüber der PICI; die Vorteile bei der Verwendung von Ammoniak als Reaktand- bzw. Moderatorgas werden besonders beim direkten Vergleich der mit den verschiedenen Ionisierungsarten erhaltenen Spektren des Nitroglycerins deutlich.Als spezieller Vorteil der PPNICI-Methode fällt ins Gewicht, daß die positiven und negativen CI-Spektren im Verlauf einer Analyse erhalten werden, der Verbrauch an Probenmaterial also gering gehalten werden kann.

---

Identification of some explosives by special GC/MS-techniques, particularly the PPNICI-method

Summary Twelve representative explosives were analysed by GC/MS using various ionization techniques (EI; CI) and reagent gases (methane, isobutane, ammonia); besides PICI (positive ion CI) the NICI (negative ion CI) method was applied. Samples excluded from gas chromatography were introduced by solid probe.Under electron impact conditions the investigated substances showed spectra of only limited evidence, thus strongly indicating the use of Chemical Ionization.From the tested reagent gases, isobutane fitted best (for PICI); the CI-spectra showed some peculiarities of analytical interest, as dimerizations, adduct formations and ions, for which no reasonable explanation can be given.Like ammonia as reagent gas, which produces a much more intensive quasimolecular ion with some explosives, application of the PPNICI method offers some advantages: suppression of the ionization of irrelevant substances (like plasticizers) in the specimen leads to a slight increase in sensitivity; the superiority of ammonia as reagent gas can clearly be demonstrated by comparing the mass spectra of glycerol trinitrate obtained by the various ionization methods mentioned.One of the main advantages of the PPNICI method is the fact, that positive and negative CI spectra can be recorded simultaneously during one run, thus minimizing consumption of sample material.

Auszugsweise vorgetragen auf dem 4. Symposium für Toxikologie. Berlin, 20.–22. Mai 1981     

Determination of alkyltrimethylammonium surfactants in hair conditioners and fabric softeners by gas chromatography-mass spectrometry with electron-impact and chemical ionization

The commercial hair conditioners and fabric softeners were analyzed for the content of alkyltrimethylammonium compounds (ATMACs) by gas chromatography-mass spectrometry (GC-MS) with electron impact (EI) and low-pressure positive-ion chemical ionization (PICI) modes. The method involves mixed diluted samples (adjust pH to 10.0) with potassium iodide to enhance the extraction of iodide-ATMA+ ion pairs by direct liquid-liquid extraction. The iodide-ATMA+ pairs were then demethylated to their corresponding nonionic alkyldimethylamines (ADMAs) by thermal decomposition in a GC injection-port. A high abundance of ADMAs was detected at the temperature above 300 degrees C in the GC injection-port. The enhanced selectivity of quasi-molecular ion chromatograms of C12-C18-ADMA, obtained using methanol PICI-MS enables ADMAs to be identified. The accuracy and precision of the method was validated and was successfully applied to determine contents of ATMAC in commercial hair conditioners and fabric softeners. The contents of total measured ATMAC ranged from 0.4 to 6.9% for hair conditioners, and from 3.3 to 4.6% for fabric softeners.     

Broad Spectrum Analysis of Ionic and Non-Ionic Organic Contaminants in Urban Wastewaters and Coastal Receiving Aquatic Systems

Abstract

A comprehensive analytical protocol for the qualitative and quantitative assessment of ionic and non-ionic organic contaminants in urban wastewaters, coastal seawater, and sediments is outlined. Liquid-liquid extraction (LLE) and adsorption onto polymers (polyurethane foam) or macroreticular resins (Amberlite, XAD-2) for the extraction of a wide variety of dissolved contaminants are evaluated. Organic extracts are resolved into fractions of increasing polarity by a combination of silica-alumina adsorption and gel permeation chromatography. HRGC-MS analysis of these fractions, using different ionization techniques, namely electron impact (EI), positive (PICI) and negative ion chemical (NICI) ionization, and the direct use of FAB-MS on the original extracts enabled the identification of a broad spectrum of anthropogenic compounds (290) in the different aquatic compartments. The decoupling of these contaminants between the water-dissolved and particulate phases is discussed.     

Electron ionization and atmospheric pressure photochemical ionization in gas chromatography-mass spectrometry analysis of amino acids

The mass spectra of tert-butyldimethylsilyl (TBDMS) derivatives of 17 amino acids were obtained using electron ionization (EI) and atmospheric pressure photochemical ionization (APPhCI) mass spectrometry. The APPhCI mass spectra for all of the derivatives except arginine were shown to consist of only molecular [M](+.) and quasimolecular [MH](+) ions whereas, in the case of EI, the compounds in question underwent a drastic fragmentation. The application of APPhCI to gas chromatography-mass spectrometry enables a reliable identification of the TBDMS derivatives of amino acids in a mixture, even if its components are only partially resolved, due to the unique molecular masses for each compound. Comparison of the respective positive-ion chemical ionization (PICI) mass spectra available in the literature with APPhCI spectra has shown that, in the case of PICI, unlike APPhCI, noticeable fragmentation occurs.     

Gas chromatography and mass spectrometry of methoxylated polybrominated diphenyl ethers (MeO-PBDEs)

Twenty-six methoxylated polybrominated diphenyl ethers (MeO-PBDEs) were characterized by gas chromatography (GC) on four different GC columns with different lengths and polarities, as well as by mass spectrometry using three ionization techniques, electron ionization (EI), electron capture negative ionization (ECNI) and positive ion chemical ionization (PICI). MeO-PBDE congeners with similar retention times on a nonpolar GC column were separated when analyzed on a polar GC column. EI can be used to determine the position of the methoxy substituent (ortho, meta or para) relative to the diphenyl ether oxygen in the MeO-PBDEs. The PICI ionization technique is shown to be valuable to generate structural information of the MeO-PBDEs, i.e. the degree of bromination on both the methoxy-substituted ring and the entirely brominated phenyl ring can be obtained. This structure information can also be achieved for certain MeO-PBDEs with the methoxy group in ortho position to the diphenyl ether bond in ECNI mode. Like other brominated compounds ECNI is preferable when analyzing environmental samples for quantification of MeO-PBDEs because of the formation of bromide ions, which enables low detection limits.     

Determination of triazine herbicides in surface and drinking waters by off-line combination of liquid chromatography and gas chromatography-mass spectrometry

Summary Mass spectra of 12 triazines were obtained by electron impact (EI), positive-ion chemical ionization (PCI) and negative-ion chemical ionization (NCI) using methane and isobutane as reagent gases. EI mass spectrometry is more sensitive than PCI and NCI, although the chemical ionization modes increase selectivity markedly. A pre-column packed with polymer stationary phase was employed to preconcentrate surface and drinking water samples. After desorption of the analytes with ethyl acetate, an aliquot was injected directly into the GC-MS system. Atrazine and simizine were found in these samples at 10–80 ppt levels. The limits of detection for both herbicides were below 10 ppt in drinking water.     

The behaviour of stereoisomeric ions in the gas phase: 2—Negative and positive chemical ionization of cyclohexanehexacarboxylic methyl esters

The positive ion chemical ionization (CI (isobutane)), negative ion chemical ionization (NICI) electron attachment (CH₄, He) and NICI (OH^?) spectra of the title compounds have been studied in detail with the aid of deuterium-labelled derivatives. The obtained results show that under CI conditions the stereospecificity is retained. Interesting correlations with the condensed phase epimerization yields are emphasized.     

The effects of electron and chemical Ionization Modes on the MS Profiling of Whole Bacteria

Free fatty acid profiling of whole bacteria [Francisella tularensis, Brucella melitensis, Yersinia pestis, Bacillus anthracis (vegetative and sporulated), and Bacillus cereus] was carried out with direct probe mass spectrometry under 70-eV electron ionization (EI) and isobutane chemical ionization in both the positive (CI+) and negative modes (CI-). Electron ionization produced spectra that contained molecular ions and fragment ions from various free fatty acids. Spectra acquired with isobutane chemical ionization in the positive mode yielded molecular ions of free fatty acids as well as ions from other bacterial compounds not observed under EI conditions. Spectra obtained with negative chemical ionization did not contain as much taxonomic information as EI or CI+; however, some taxonomically significant compounds such as dipicolinic acid and poly(3-hydroxybutyrate) did produce negative ions. All ionization modes yielded spectra that could separate the bacteria by Gram-type when observed with principle components analysis (PCA). Chemical ionization in the positive ion mode produced the greatest amount of differentiation between the four genera of bacteria when the spectra where examined by PCA.     

Simultaneous determination of aliphatic and aromatic amines in water and sediment samples by ion-pair extraction and gas chromatography-mass spectrometry

A gas chromatography-mass spectrometry (GC-MS) method has been proposed for the determination of aliphatic and aromatic amines in a variety of environmental samples including wastewater, river water, sea water and sediment samples. The method includes ion-pair extraction with bis-2-ethylhexylphosphate (BEHPA), derivatisation of compounds with isobutyl chloroformate (IBCF) and their GC-MS analysis. Aliphatic and aromatic amines were isolated from aqueous samples using BEHPA as ion-pair reagent and derivatised with IBCF for their chromatographic analysis. Solid-liquid extraction of aliphatic and aromatic amines in sediment samples were performed in Soxhlet apparatus with acidic MeOH and ion-pair extraction with BEHPA were carried out for the isolation of amines followed by derivatisation with IBCF. Aliphatic and aromatic amines were then analysed with GC-MS in both electron impact (EI) and positive and negative ion chemical ionisation (PNICI) mode as their isobutyloxycarbonyl (isoBOC) derivatives. The obtained recoveries ranged from 81.0 to 98.0% and the precision of this method, as indicated by the relative standard deviations (RSDs) was within the range of 0.5 and 4.3%. The detection limits obtained from calculations by using GC-MS results based on S/N = 3 were within the range from 0.07 to 0.50 ng/l.     

Gas chromatographic-mass spectrometric analysis of diols and tetrols from reactions of polycyclic aromatic hydrocarbon epoxides with hemoglobin

We have evaluated both electron ionization (EI) and negative-ion chemical ionization (NICI) methods for the analysis of trimethylsilyl derivatives of a series of polycyclic aromatic hydrocarbon (PAH) alcohols including styrene diol, benzo[e]pyrene diol and tetrols, cyclopenta[c,d]pyrene diols, benzo[a]pyrene-4,5-diols, chrysene tetrols, benz[a]anthracene tetrols I and II, and syn- and anti-benzo[a]pyrene tetrols. NICI is the more sensitive method for all compounds except styrene diol. Detection limits are compound-dependent and range from 1 fmol for cyclopenta[c,d]pyrene diol to 1 pmol for benzo[e]pyrene diol. The EI detection limit for styrene diol is 60 fmol. PAH alcohols related to the compounds listed above were observed following hydrolysis of hemoglobin which had been reacted with PAH epoxides in vitro. Benzo[a]pyrene tetrols and a chrysene tetrol were observed following hydrolysis of hemoglobin isolated from human smokers' blood. Hydrolysis of styrene oxide treated hemoglobin in 18O-labeled water revealed at least two mechanisms of ester hydrolysis, including the BAL 1 pathway.     

Analysis of medazepam, diazepam, and metabolites in plasma by gas-liquid chromatography with electrolytic conductivity detection.

An improved electrolytic conductivity detector allowed the gas-liquid chromatographic analysis of medazepam, diazepam, and major metabolites in 2 ml plasma at concentrations of 20 microgram/l. The detector had a sensitivity limit of less than 1 ng (or 100 pg nitrogen) when operated in the nitrogen-selective mode and a nitrogen/carbon elemental selectivity ratio of greater than 100,000 compared to octadecane and cholesterol. Detector response when operated in various element-selective chemical modes was investigated, and its application to the analysis of the title compounds was compared to electron capture and flame ionization detection systems.     

Applications of gas chromatography—mass spectrometry in monitoring environmentally important compounds

The use of gas chromatography-mass spectrometry (GC-MS) with electron impact (EI) and positive and negative chemical ionization (PCI and NCI, respectively) is a valuable confirmatory technique for unequivocal identification of pesticide residues and polychlorinated biphenyls in different environmental matrices. This article outlines some of the most important developments and makes recommendations for selecting the mode of GC-MS operation. Emphasis is placed on less commonly used techniques such as NCI, which provides high selectivity and sensitivity for specific groups of pollutants. The coverage is restricted and represents the personal perspective of the author.