Physicochemical features of poly-o-phenylenediamine modification with palladium microparticles

A new method is developed to prepare alladium dispersed in a polymeric matrix. Exposure of poly-o-phenylenediamine films in PdCl₂ solution showed palladium cations strongly linked by the polymeric matrix to enable reduction of the metal accumulated in the polymer bulk. Optical absorption spectra were studied for poly-ophenylenediamine saturated with palladium ions and poly-o-phenylenediamine with palladium electroreduced upon impregnation. Method of X-ray photoelectron spectroscopy confirmed the presence of palladium cations in unreduced poly-o-phenylenediamine film and palladium metal upon reduction in polymeric matrix.     

Electrochemical and chemical modification of poly-o-phenylenediamine redox polymer

Various methods for modification of poly-o-phenylenediamine (PPD) redox polymer with polyaniline (PANI) electron-conducting polymer, ReO ₄ ⁻ and [SiMo₁₂O₄₀]⁴⁻ anions, and palladium clusters are compared. Participation of anions is proven in the processes of PPD synthesis and redox transformations. Formation mechanisms and properties of composites consisting of a redox polymer and electron-conducting polymer and those of two different electron-conducting polymers are compared for example of PPD-PANI and ethylene-dioxythiophene-polybithiophene. A comparison of these systems shows the main change in the potential drop to take place at the metal/polymer interface for a redox polymer and at the polymer/solution interface, for an electron-conducting polymer. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1409–1416. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The article was translated by the authors.     

Mechanism for nucleation and growth of electrochemical deposition of palladium(II) on a platinum electrode in hydrochloric acid solution

Palladium(II)and chloride ions tend to form complexes in aqueous solution.Both theoretical and experimental(by UV spectrum)results indicate that there are four complexes formed in aqueous solution containing 3 mol/L hydrochloric acid and 20mmol/L PdCl2.This work evaluates the kinetics of electrochemical deposition of palladium on a Platinum electrode.For this purpose,palladium electrodeposition was investigated by means of cyclic voltammetry(CV),potentiostatic current-time transients(CTTs)and Tafel curve.By CTTs curves,the regions corresponding to the charge transfer control,mixed control and diffusion control were identified.In the diffusion control region,palladium electrodeposition mechanism was characterized as progressive nucleation with three-dimensional(3D)growth under diffusion control;as for the mixed control region,an adsorption(IAds),ion transfer(IIT),and nucleation and growth(ING)model were proposed to analyze the current-time transients quantitatively,which could separate the IAds,IIT and ING perfectly.     

Design variations of a polymer–enzyme composite biosensor for glucose: Enhanced analyte sensitivity without increased oxygen dependence

The glucose sensitivity and oxygen dependence of a variety of implantable biosensors based on glucose oxidase (GOx), incorporating an electrosynthesized poly-o-phenylenediamine (PPD) permselective barrier on 125-μm diameter Pt disks (Pt_D) and cylinders (Pt_C, 1-mm length), were measured and compared. Full glucose calibrations and experimental monitoring of solution oxygen concentration allowed us to determine apparent Michaelis–Menten parameters for glucose and oxygen. In the linear region of glucose response, the most sensitive biosensor design studied was Pt_D/PPD/GOx (enzyme deposited over polymer) that was 20 times more sensitive than the more widely used Pt_C/GOx/PPD (enzyme immobilized before polymer deposition) configuration. The oxygen dependence, quantified as K_M(O₂), of both active and less active designs was surprisingly similar, a finding that could be rationalized in terms of an increase in K_M(G) with increased enzyme loading. The Pt_D/PPD/GOx design will now enable us to explore glucose concentration dynamics in smaller and layered brain regions with good sensitivity and minimal interference from fluctuations in tissue pO₂.     

Polypyrrole-palladium systems prepared in PdCl2 aqueous solutions

In the work, reactions of a partially deprotonated polypyrrole doped with hydroxide ions (PPyOH) in various PdCl₂ aqueous solutions which differed in acidity were studied. Using X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy it was established that in the PdCl₂ solutions of lower acidity PPyOH was oxidatively doped and Pd⁰ and Pd²⁺ were incorporated into the polymer matrix. Pd²⁺ formed palladium(II) hydroxy-and/or aquochlorocomplex dopant anions and/or was coordinated by nitrogen atoms of the polymer (Pd-N bond). Additionally, deprotonation of PPyOH occurred in the PdCl₂ solutions of lower acidity. It was proposed that deprotonation of PPyOH was caused by nucleophilic attack of [PdCl₃(H₂O)]⁻ on the positively charged, doped polymer chain. By comparison of the PPyOH and chloride-doped polypyrrole (PPyCl)-palladium systems prepared in similar PdCl₂ solutions of lower acidity it was shown that the type of the counterion in the starting polymer has a decisive effect on the deprotonation process.PPyOH was less reactive towards palladium species in the PdCl₂ solutions of higher acidity where [PdCl₄]²⁻ was the dominant complex. PPy-palladium systems containing exclusively Pd²⁺ were obtained in this case. It was proposed that incorporation of palladium species in these conditions proceeded via an acid-base reaction or coordination of palladium ions by the polymer chain (Pd-N bond formation).Results of the studies may serve as the basis for the preparation of a variety of polypyrrole-supported palladium catalysts.     

Solvent Extraction–Photometric Determination of Palladium Using Complexation with 1-(2-Pyridylazo)-2-Naphthol

Palladium(II) complexation with 1-(2-pyridylazo)-2-naphthol (PAN) in aqueous solutions followed by extraction with chloroform and photometric detection was studied. The best conditions were found for the formation of the complex in an aqueous solution and for its extraction with chloroform that provided a sufficient degree of binding palladium ions. The stability constant of the complex cation PdX⁺, which is extracted by chloroform as an ion pair [PdX]⁺[An^–] (An^–– CH₃COO^–), was calculated using the methods proposed by Rossotti (log K _stab= 18.73) and Komar' (log K _stab= 18.82). The equilibrium constant of the complexation reaction was also calculated (5.45 × 10⁴). It was shown that components of nonferrous alloys affect the determination of palladium by photometry as its complex or ion pair with PAN in chloroform.     

Influence of O/S/Se Exchange on the Stability of 1,3,4-Selana(Thia/Oxa)Diazole-Palladium Complexes as Studied by Electrospray Ionization Mass Spectrometry

Abstract

The complexes of 2-phenyl-1,3,4-selena(thia/oxa)diazole with a palladium cation were studied by using electrospray ionization mass spectrometry. Palladium chloride was used as a source of palladium cations. The complexes of ligand:metal stoichiometry of 3:1 (ions [L₃+PdCl]⁺) were formed for selenadiazoles and thiadiazoles. Quantum mechanical calculations performed indicated that ligand molecules are attached to palladium cation by the N-4 atom. The fragment ions formed [L₂–H+Pd]⁺ may be regarded as organometallic species. Selenadiazoles were found more prone to form the palladium complexes than thiadiazoles. Oxadiazoles did not yield the respective palladium complexes. For comparison, the nickel cation was also included in the study but only 1:1, and less abundant 2:1 complexes were observed. Exchange of selenium into oxygen does not affect the abilities of the ligands to form nickel complexes.     

Palladium(II) Extraction from Hydrochloric Acid Solutions with 4-[(Hexylsulfanyl)methyl]-3,5-Dimethyl-1H-Pyrazole

Palladium(II) extraction from hydrochloric acid solutions with a novel weakly basic complexing reagent, 4-[(hexylsulfanyl)methyl]-3,5-dimethyl-1H-pyrazole, dissolved in chloroform was studied. Palladium(II) was found to be highly efficiently extracted from 0.1–3 mol/L HCl solutions. A coordination mechanism of palladium(II) extraction with a protonated form of the reagent via fast interphase transfer of ion associates was proposed. The composition of the extracted compound, [PdCl₂μ-L]_n (n > 2), was found, and the way of coordination of the reagent to metal ions through N(2) nitrogen atom and thioether sulfur atom was determined. The reagent can be recommended for concentrating palladium(II) and selectively separating it from platinum(IV), copper(II), nickel(II), and iron(III).     

Catalytic properties of palladium nanoclusters synthesized within diblock copolymer films: hydrogenation of ethylene and propylene

Palladium nanoclusters were synthesized within microphase-separated diblock copolymer films of [MTD]₁₁₃[Pd(Cp^N)PA]₅₀ (MTD=methyltetracyclododecene, Cp^N=endo-2-(cyclopentadienylmethyl)norborn-5-ene, PA=η³-1-phenylallyl). The organometallic repeat units were reduced by exposing the films to hydrogen at 100°C, leading to the formation of nearly monodisperse palladium nanoclusters. TEM, SAXS, and WAXS were used to characterized the polymer morphology and cluster size. The nanocomposites were active catalysts for hydrogenation of ethylene and propylene. The cluster size and voids within the polymer matrix were important factors in determining the catalyst activity, expressed as the moles of alkene hydrogenated per mole palladium per second. In contrast to permeation results that showed that the permeability of propylene in polyMTD is greater than that of ethylene, the catalyst activity for hydrogenation of ethylene was greater than that for propylene.     

A Heterogeneous‐Catalyst‐Based,Microwave‐Assisted Protocol for the Synthesis of 2,2′‐Bipyridines

A new method of preparing 2,2′‐bipyridines with short reaction times by using microwave assistance and heterogeneous catalysts has been developed. With a Negishi‐like protocol, it was found that Ni/Al₂O₃–SiO₂ afforded 2,2′‐bipyridine products in up to 86 % yield in 1 h. Palladium supported on alumina also provided yields of 2,2′‐bipyridines comparable to those seen for homogeneous PEPPSI^TM (1,3‐diisopropylimidazol‐2‐ylidene)(3‐chloropyridyl)palladium(II)dichloride) and tetrakis(triphenylphosphanyl)palladium complexes.     

Palladium chloride anchored on organic functionalized MCM‐41 as a catalyst for the Heck reaction

Palladium chloride was grafted to amino‐functionalized MCM‐41 to prepare heterogeneous catalysts. XRD, N₂ adsorption–desorption isotherms, IR, ¹³C and ²⁹Si cross‐polarization magic‐angle spinning NMR spectroscopy and XPS techniques were employed to characterize the catalytic materials. The heterogeneous palladium catalyst exhibited excellent catalytic activity for the Heck vinylation of iodobenzene with methyl acrylate, giving 92% yield of methyl cinnamate in the presence of N‐methylpyrrolidone (NMP) and triethylamine (Et₃N). The stability of the heterogeneous catalyst was also studied in detail. The catalytic tests showed that the palladium leaching correlated to solvent, base and palladium loading. The heterogeneous catalyst exhibited excellent stability towards loss of activity and palladium leaching was not observed during six recycles in the presence of toluene and Na₂CO₃. Copyright © 2007 John Wiley & Sons, Ltd.     

Matrix effects on the fast atom bombardment mass spectra of palladium complexes

In an attempt to identify and characterize the intermediates involved in multi-step palladium catalyzed coupling reactions, under fast atom bombardment (FAB) conditions, the selection of a matrix to enhance ion formation without degrading the palladium complex is critical. In general, it is observed that the analysis of tetrakis(triphenylphosphine)palladiurn(0) using glycerol, m-nitrobenzyl alcohol or o-nitrophenyl octyl ether as the FAB matrix compound produces several ions which correspond to complexes of the type Pd_xL_yO_z⁺ (L = PPh₃; x = 1-4; y = 1-4; z = 0-2), in addition to clusters containing one or more matrix molecules. FAB mass spectra generated using triethanolamine- or tetramethylene sulfone (sulfolane) are observed to contain ions related to the palladium(0) complex with little or no interference from ions related to the oxidation or reduction processes.     

Application of modified multiwalled carbon nanotubes for palladium preconcentration and determination in water and soil samples by flame atomic absorption spectrometry

A new solid-phase extraction method for determination of palladium by atomic absorption spectrometry is described. Multiwalled carbon nanotube (MWCNT) modified with 1-butyl 3-methyl imidazolium hexafluorophosphate (MWCNT-[BMIM]PF₆) and supported on sawdust was used as an adsorbent for preconcentration of palladium. Palladium ions are retained on (MWCNT-[BMIM]PF₆) adsorbent as [PdI₄]^2? and eluted from the column with a thiosulfate–ammonia mixture. The optimum conditions for the adsorption were evaluated by changing various parameters such as pH, sample volume, concentration and volume of eluent, iodide concentration and interfering ions to achieve highest sensitivity and selectivity. The calibration graph was linear in the range of 2–120 ng mL^?1 of palladium in the initial solution and the limit of detection based on 3S_b was 0.41 ng mL^?1. The method was applied to the determination of palladium in water, wastewater and soil samples.     

Spectrophotometric determination of traces of platinum in palladium with dithizone after matrix precipitation as a compound with ammonia and iodide

Palladium is precipitated with ammonia and iodide; platinum remains in solution and is completely extracted with dithizone in carbon tetrachloride. The precipitated palladium compound is shown to be Pd(NH₃)₂I₂ by thermogravimetry and by determinations of ammonia and iodide. To separate small amounts of palladium from platinum in the dithizone extract, the resistance of platinum dithizonate to oxidizig agents is utilized; platinum dithizonate is converted to an oxidized form which is easily reduced to the initial form. The separation and spectrophotometric procedure enable about 1 × 10^?3% platinum to be quantified in palladium(II) chloride with good precision and accuracy.     

Gravimetric determination of palladium with quinolinimide as a reagent

Summary Quinolinimide which is found to be a selective reagent for palladium forms a complex of the composition Pd(C₇H₃O₂N₂)₂. The reagent quantitatively precipitates palladium from solutions of p_H 0.5 to 2.5 in presence of common ions as well as platinium metals, except tin which, however, can be kept in solution by complexing with citric acid. The palladium complex being stable up to 307° C can be directly weighed.

---

Zusammenfassung Chinolinimid wird als selektives Reagens für Palladium vorgeschlagen. Bei p_H-Werten zwischen 0,5 und 2,5 kann Palladium quantitativ in Form des Komplexes Pd(C₇H₃O₂N₂)₂ gefällt werden, wobei die meisten anderen Ionen, auch die der Platinmetalle, in Lösung bleiben. Zinn stört, kann aber mit Citronensäure maskiert werden. Der Palladiumkomplex ist bis 307° C stabil und kann direkt ausgewogen werden.

     

Polystyrene‐supported Pd(II)–N‐heterocyclic carbene complex as a heterogeneous and recyclable precatalyst for cross‐coupling of acyl chlorides with arylboronic acids

Palladium‐catalysed cross‐coupling reaction of aroyl chlorides with arylboronic acids was achieved in the presence of polystyrene‐supported palladium(II)–N‐heterocyclic carbene complex, using K₂CO₃ in acetone–water, providing diaryl ketones in high yields. Furthermore, the heterogeneous catalyst could be reused up to four times without significant loss of activity.     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Palladium‐mediated copolymerization of diazocarbonyl compounds with phenyldiazomethane

Phenyldiazomethane was found to be polymerized by the reaction with palladium‐based initiating systems. Homopolymerization of phenyldiazomethane afforded a polymer, whose main chain consists of phenylmethylene framework (–CHPh–) and azo groups (–N?N–). The incorporation of the azo group was suggested from the results of elemental analyses, and confirmed by Raman spectroscopy. Palladium‐mediated copolymerization of phenyldiazomethane with (E)‐1‐diazo‐3‐nonen‐2‐one or ethyl diazoacetate proceeded to give copolymers having phenylmethylene framework, azo group, and acylmethylene or ethoxycarbonylmethylene framework in the main chain, with a variety of their compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1536–1545, 2007     

ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> binary oxides as promising supports for palladium catalysts of hydrodechlorination

Deposited palladium catalysts of the hydrodechlorination of 1,3,5-trichlorobenzene were studied. Pure zirconium and aluminum oxides and ZrO₂-Al₂O₃ mixtures with 1, 5, and 10 mol % Al₂O₃ prepared by coprecipitation were used as supports. Palladium was deposited by the precipitation of its hydroxide on supports. Catalysts on binary supports (ZrO₂ + 1% Al₂O₃ and ZrO₂ + 5% Al₂O₃) exhibited higher activity and stability in hydrodechlorination compared with catalysts on pure supports. The suggestion was made that the high activity and stability of these systems in hydrodechlorination was related to the formation of binary oxide in the interaction of ZrO₂ with palladium oxide at the stage of annealing of the catalyst precursor. Binary oxide, which was a center of the activation of the C-Cl bond, was simultaneously a source of active hydrogen. The presence of various palladium states in catalysts was substantiated by the temperature programmed reduction method.     

Palladium nanoparticles immobilized on amphiphilic and hyperbranched polymer‐functionalized magnetic nanoparticles: An efficient semi‐heterogeneous catalyst for Heck reaction

To address the obstacles facing the use of palladium‐based homogeneous and heterogeneous catalysts in C─C cross‐coupling reactions, a novel semi‐heterogeneous support was developed based on hyperbranched poly(ethylene glycol)‐block ‐poly(citric acid)‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@PCA‐b ‐PEG). Because of the surface modification of the Fe₃O₄ nanoparticles with amphiphilic and hyperbranched polymers (PCA‐b ‐PEG), these hybrid materials are not only soluble in a wide range of solvents (e.g. water, ethanol and dimethylformamide) but also are able to trap Pd²⁺ ions via complex formation of free carboxyl groups of the PCA dendrimer with metal ions. The reduction of trapped palladium ions in the dendritic shell of Fe₃O₄@PCA‐b ‐PEG leads to immobilized palladium nanoparticles. The morphology and structural features of the catalyst were characterized using various microscopic and spectroscopic techniques. The catalyst was effectively used in the palladium‐catalysed Mizoroki–Heck coupling reaction in water as a green solvent. In addition, the catalyst can be easily recovered from the reaction mixture by applying an external magnetic field and reused for more than ten consecutive cycles without much loss in activity, exhibiting an example of a sustainable and green methodology.