Preparation and surface properties of latexes with fluorine enriched in the shell by silicon monomer crosslinking

A series of core-shell acrylic copolymer latexes containing fluorine enriched in the shell have been prepared by emulsion polymerization of a variety of hydrocarbon monomers with (perfluoroalkyl)methyl methacrylate and vinyltriethoxysilicone. In the presence of a reactive anionic and a long chain anionic-nonionic emulsifier, the core-shell latexes were prepared and characterized by transmission electron microscopy (TEM) and tapping-mode atomic force microscopy (AFM). From AFM and contact angle measurements, it was observed that the resulting fluorine and silicon-containing acrylic copolymers with surface energy as low as 15.5 mN/m formed a dense and gradient film containing a surface layer with high a fluorine content, and that the fluorinated particles can be fixed on the surface due to the crosslinking reaction of multi-functional silicon monomer even though the fluorinated carbon number was not enough to crystallize.     

B段选择性成膜溶剂对 ABC 型氟化三嵌段共聚物氟化组分表面富集行为的影响

利用ATRP技术合成聚甲基丙烯酸甲酯-b-聚甲基丙烯酸丁酯(或聚甲基丙烯酸十八烷基酯)-b-聚(甲基丙烯酸2-全氟辛基乙酯)(PMMA230-b-PBMA12(或PODMA12)-b-PFMAn)嵌段共聚物.通过X射线光电子能谱(XPS)、X射线衍射(XRD)、动态光散射(DLS)等技术研究了中间段选择性成膜溶剂对氟化...     

成膜溶剂与氟化嵌段共聚物膜的表面富集行为

利用接触角、XPS、SFG、AFM等技术研究了环己酮、甲苯和三氟甲苯为成膜溶剂所得聚甲基丙烯酸甲酯-b-聚（甲基丙烯酸-2-全氟辛基乙酯）（PMMA—b—PFMA）嵌段共聚物膜的表面结构与性能．发现浇铸成膜时成膜溶剂对聚合物氟化组分向表面富集程度的影响相对较小,而旋涂成膜时溶剂的影响很大．不管以何种形式成膜,三氟甲苯溶剂最有利于氟化组分向表面富集,甲苯次之,环己酮最差．这一现象与溶剂的挥发速度无关．聚合物在溶液中的聚集结构、气／液界面结构是造成成膜方式对聚合物表面结构与性能产生巨大影响的主要原因．当聚合物在溶液中形成以PFMA为核、PMMA为冠的胶束结构时,在溶液固化过程中氟化组分向表面富集需要较长的时间,这时由于成膜方法直接影响溶液的固化速度,造成其对氟化组分向表面富集的程度影响很大．当聚合物在溶液中以单分子或松散聚集体存在,在溶液固化过程中氟化组分向表面富集的速度很快,这时成膜方法对氟化组分向表面富集的程度影响很小．以上结果无论对理论研究还是应用研究都具有重要意义．     

Effect of sequence structure on wetting behaviors of fluorinated methacrylate polymers based on perfluorohexylethyl methacrylate and stearyl acrylate

Due to the non-crystalline properties of short chain perfluoroalkyl groups,using short chain perfluoroalkyl to stabilize low surface free energy polymers has been a challenging task.In this study,we prepare a series of random copolymers poly(perfluorohexylethyl methacrylate)-co-poly(stearyl acrylate) (P13FMA-co-PSA) and block copolymers poly(perfluorohexylethyl methacrylate)-b-poly(stearyl acrylate) (P13FMA-b-PSA),and systematically investigate the effects of the sequence structure and the content of 13FMA of the fluorinated copolymers on surface free energy and surface reorganization.Static/dynamic contact angle goniometry and water/oil repellency analyses demonstrate that the random polymer P13FMA-co-PSA could not achieve low surface free energy and low surface reorganization at the same time.In contrast,for the block copolymer P13FMA-b-PSA,both low surface free energy and low surface reorganization are acquired simultaneously.The results of X-ray photoelectron spectroscopy (XPS),dynamic contact angle goniometry and differential scanning calorimetry (DSC) reveal the above-mentioned properties.The consecutive 13FMA segments improve the surface fluorine density,while the consecutive SA chains enhance the crystallinity of the SA segments,and further hinder the surface reorganization of the perfluoroalkyl groups.Therefore,P13FMA-b-PSA exhibits a higher utilization efficiency of fluorine atoms and a better structural stability than P13FMA-co-PSA.     

Structure and surface properties of fluorinated organic–inorganic hybrid films

Fluorinated organic–inorganic hybrid films were prepared by sol–gel process from tridecafluoroctyltriethoxysilane (PFAS), 3-glycidoxypropyltrimethoxysilane, and tetraethoxysilane (TEOS). It has been found that the fluorinated hybrid films possessed fluorinated side chains originating from PFAS as top layer, and silica network as bottom layer, which had very low surface energy and could be used as water repellent functional coatings. The outermost layer of the water-repellent film may be fully covered by the perfluoroalkyl side chains as the molar ratio of PFAS/TEOS increases up to about 0.005:1. The addition of BPA can enhance the cross-link density of fluorinated hybrid films, and make more perfluoroalkyl groups enriching at the coating film-air interface to lower the surface free energy. However, the improvement of the cross-link density of fluorinated hybrid films tends to exhibit brittleness and micro-cracks. Consequently, it can be concluded that a small BPA additive content is preferred for the formation of fluorinated hybrid films with a smooth surface and less detectable cracks.     

Surface complexation modeling of Fe(3)O(4)-H(+) and Mg(II) sorption onto maghemite and magnetite

New fluorinated copolymers of poly(methyl methacrylate)-b-poly(butyl methacrylate) or poly(n-octadecyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate (PMMA(x)-b-PBMA(y)-ec-PFMA(z) or PMMA(x)-b-PODMA(y)-ec-PFMA(z)) were synthesized by living atom transfer radical polymerization. Thin films made of PMMA(230)-b-PODMA(y)-ec-PFMA(1) were characterized by differential scanning calorimetry, angle-resolved X-ray photoelectron spectroscopy and X-ray diffraction. These films were found to exhibit robust surface segregation of the end groups. Furthermore, the fluorine enrichment factor at the film surface was found to increase linearly with increasing degree of polymerization of poly(n-octadecyl methacrylate) and its increasing fusion enthalpy in the second block, which enhances the segregation of the fluorinated moieties.     

Solvent effect on the film formation and the stability of the surface properties of poly(methyl methacrylate) end-capped with fluorinated units

The surface structure and stability (the resistance to surface reconstruction) of end-capped poly(methyl methacrylate) films were greatly affected by the solvents used for film preparation. Films of end-capped PMMA with about four 2-perfluorooctylethyl methacrylate units cast with benzotrifluoride solution exhibited excellent stability and resistance to polar environments compared with those cast with cyclohexanone and toluene solutions. The observed difference in stability between these fluorinated surfaces is attributed to their surface microstructures formed during the film formation processes, which are closely related to the associative behavior of the end-capped PMMA in the solution. A relatively perfect close-packed and well-ordered structure of the perfluoroalkyl side chains at the surface of the PMMA(857)-ec-FMA(3.3) film was formed when the film was cast with benzotrifluoride solution, in which only unimers existed. This study indicates that such a solvent effect may be used to promote the formation of a well-ordered packing structure of the fluorinated moieties at the film surface. The ordering of the packing structure is to a certain extent more important than the content of the fluorinated moieties at the surface for improving the surface stability.     

Poly(methyl methacrylate) composites prepared by in situ polymerization using organophillic nano-to-submicrometer zinc oxide particles

Nano- and submicrometer zinc(II) oxide particles were synthesized by the polyol method and were used for the preparation of ZnO/poly(methyl methacrylate) (ZnO/PMMA) composite materials by the chain polymerization of methyl methacrylate (MMA) in bulk. ZnO particles with an organophilic surface layer were homogeneously dispersed in the PMMA matrix. Very low concentrations (0.1 wt.%) of nano zinc oxide absorbed over 98% of UV light as determined by UV-vis spectroscopy. Nano zinc oxide (75 nm) increased the initial decomposition temperature of the PMMA matrix by 30-40 °C at concentrations of 0.1% and above. This was explained by the changes in the termination mechanism of MMA polymerization resulting in a reduced concentration of vinylidene chain ends. Nano ZnO also increased the MMA polymerization reaction rate and reduced the activation energy. Submicrometer ZnO showed lower UV absorption, thermal stabilization and no influence on the reaction kinetics indicating that average particle size is of vital importance for the properties of PMMA nanocomposites and for MMA polymerization.     

含氟高分子/SiO2杂化疏水材料的制备及涂层表面性质

采用自由基溶液聚合与溶胶-凝胶法相结合的方法制备了含氟高分子/SiO2杂化疏水材料.通过甲基丙烯酸十二氟庚酯(FA)与乙烯基三乙氧基硅烷(VTES)共聚合成了含氟硅共聚物(PFAS),进一步通过原硅酸乙酯(TEOS)与PFAS共聚物溶液共水解缩聚制备了具有含氟侧基的碳碳主链高分子和硅氧网络的含氟高分子/SiO2杂化疏水材料.研究结果表明,SiO2组分含量提高可以显著增加杂化材料薄膜的涂敷厚度,改善其耐久性能,而对杂化材料疏水性能的影响不大.     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Directional Self‐Assembly of Fluorinated Star Block Polymer Thin Films Using Mixed Solvent Vapor Annealing

We demonstrate the directional alignment of perpendicular‐lamellae domains in fluorinated three‐armed star block polymer (BP) thin films using solvent vapor annealing with shear stress. The control of orientation and alignment was accomplished without any substrate surface modification. Additionally, three‐armed star poly(methyl methacrylate‐block‐styrene) [PMMA‐PS] and poly(octafluoropentyl methacrylate‐block‐styrene) were compared to their linear analogues to examine the impact of fluorine content and star architecture on self‐assembled BP feature sizes and interdomain density profiles. X‐ray reflectometry results indicated that the star BP molecular architecture increased the effective polymer segregation strength and could possibly facilitate reduced polymer domain spacings, which are useful in next‐generation nanolithographic applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1663–1672     

Fluorinated star‐shaped block copolymers: Synthesis and optical properties

Tetrakis(4‐(1‐bromoethyl)phenyl)silane is synthesized and utilized to initiate the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to generate bromo‐terminated four‐armed PMMA macroinitiators, which further initiate the ATRP of methylacryloyloxyl‐2‐hydroxypropyl perfluorooctanoate (FGOA) to create fluorinated star‐shaped block copolymers PMMA‐b‐poly(FGOA)s with fluorine content ranging from 0 to 31.7 wt %. The polymerizations are well controlled with the polydispersity indices <1.30. The polymers readily dissolve in common organic solvents and show good film‐formation. Compared with the nonfluorinated sample, the fluorinated films exhibit significantly increased water contact angles owing to the enrichment of fluorine on the surface. The enhanced hydrophobicity is advantageous for the optical stability when the devices work under a moist environment. Moreover, the films possess high thermo‐optic coefficients, tunable refractive indices, and extremely low birefringence coefficients because of the presence of bulky and rigid tetraphenylsilane core and star‐shaped topological structure, showing potential application in optical waveguide devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1969–1977     

Preparation and applications of novel fluoroalkyl end‐capped vinyltrimethoxysilane oligomer/hydroxyapatite nanocomposites

Novel fluoroalkyl end‐capped vinyltrimethoxysilane oligomer/hydroxyapatite (HAp) nanocomposites were prepared by the reaction of calcium nitrate tetrahydrate and phosphoric acid in the presence of the corresponding oligomer. These fluorinated oligomer/HAp composites thus obtained are nanometer size‐controlled fine particles (83–173 nm), and were found to exhibit good dispersibility in methanol, ethanol, and isopropyl alcohol. These fluorinated HAp nanocomposites were applied to the surface modification of glass and poly(methyl methacrylate) (PMMA) to exhibit good hydro‐ and oleophobic characteristics imparted by fluorine on their surface. In addition, the surface structural changes of the modified polyethylene terephtalate and PMMA films treated with these fluorinated nanocomposites before and after soaking in a simulated body fluid (SBF) were analyzed by using SEM, XRD, and EDX to observe the formation of spherical HAp deposits on the surface. Copyright © 2009 John Wiley & Sons, Ltd.     

SiO2@P（MMA/BA/3FMA）复合纳米粒子的制备及膜性能

通过溶胶-凝胶法与半连续种子乳液聚合法相结合,以正硅酸乙酯(TEOS)制备的纳米SiO2为核,以甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)和甲基丙烯酸三氟乙酯(3FMA)的共聚物P(MMA/BA/3FMA)为壳,合成了SiO2@P(MMA/BA/3FMA)核-壳结构纳米复合粒子.为防止纳米SiO2的团聚,提高其与共聚物的结合力,用乙烯基三甲氧基硅烷(VTMS)对纳米SiO2进行改性.通过红外光谱、透射电子显微镜、动态激光散射粒度仪、静态接触角测试仪、X射线光电子能谱分析和热重分析等表征了乳液结构及膜性能.结果表明,获得的复合纳米粒子呈现粒径分布为40～50 nm的核-壳结构球型颗粒.由于含氟官能团的迁移使得氟元素在膜-空气界面富集,有效降低了膜的表面自由能.当3FMA质量分数达到25%时,膜表面自由能达到最低值(23.13 mN/m).随着3FMA含量的增加,共聚物初始热分解温度由350℃提高到390℃.     

Preparation of poly(methyl methacrylate) grafted hydroxyapatite nanoparticles via reverse ATRP

Surface-initiated reverse atom transfer radical polymerization (reverse ATRP) technical was successfully employed to modify hydroxyapatite (HAP) nanoparticles with poly(methyl methacrylate) (PMMA). The peroxide initiator moiety for reverse ATRP was covalently attached to the HAP surface through the surface hydroxyl groups. Reverse ATRP of methyl methacrylate (MMA) from the initiator-functionalized HAP was carried out, and the end bromide groups of grafted PMMA initiated ATRP of MMA subsequently. Fourier transformation infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA) and transmission electron microscopy (TEM) were employed to confirm the grafting and to characterize the nanoparticle structure. The grafted PMMA gave HAP nanoparticles excellent dispersibility in MMA monomer. As the amount of grafted PMMA increased, the dispersibility of surface-grafted HAP and the compressive strength of HAP/PMMA composites were improved.     

Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles

Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N′-methylenebisacrylamide on the surface of calcium carbonate (CaCO₃) particles, followed by the dissolution of the CaCO₃ core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO₃ particles and PMMA capsules were 3.8 ± 0.6 and 4.0 ± 0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied.     

Surface modification of natural rubber film by polymerisation of methyl methacrylate in water-based system

Polymerisation of methyl methacrylate (MMA) on the surface of natural rubber (NR) film was studied in order to increase the surface hardness, roughness and, hence, to decrease the friction coefficient of rubber. We used the two-step process: (i) swelling of MMA and tert-butyl hydroperoxide, emulsified in an aqueous solution of sodium dodecyl sulphate, onto the NR film surface, and (ii) subsequently immersing the swollen rubber strip into an alkaline aqueous solution of ferrous ion/fructose for redox initiation. The presence of PMMA on the NR surface was examined by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). Increasing the concentration of ferrous ion caused an increase in MMA conversion. The surface morphology observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) in tapping mode revealed the aggregation of micronmetre-scale nodules on the modified surface. The surface hardness and roughness increased with increasing PMMA content.     

Postulation of the mechanism of the selective synthesis of isotactic poly(methyl methacrylate) catalysed by [Zr[(Cp)(Ind)CMe2](Me)(thf)](BPh4): a Hartree-Fock, MP2 and density functional study

The bridged. C1-symmetric, single-component zirconocene [Zr((Cp)(Ind)CMe2](Me)(thf)](BPh4) (Ind = indenyl, Cp = cyclopentadienyl) polymerises methyl methacrylate (MMA) selectively to isotactic poly(methyl methacrylate) (PMMA) without further cocatalysts or activators. To elucidate the stereoselective steps of the polymerisation of MMA by using this catalyst we studied the propagation steps occurring with the derivative [Zr[(Cp)(Ind)CH2][-O-C(OMe)=C(Me)(Et)](MMA)]+ by ab initio calculations at the Hartree-Fock(HF) level of theory. After the initiation step, which consumes the first two MMA molecules, each new catalytic cycle begins with the stereoselective addition of a new MMA molecule at the indenyl side of the zirconocene fragment. At the same time the enolate ring undergoes a stereoselective in-plane ring shift to the side opposite to the indenyl ring. These findings are used to postulate a mechanism for the polymerisation that explains the stereoselective synthesis of isotactic PMMA.     

Non-bioaccumulative, environmentally preferable stabilizer architectures for the dispersion polymerization of MMA in supercritical CO2

To overcome the environmental concerns associated with long-chain perfluorinated compounds, in this report, non-bioaccumulative, environmentally friendly stabilizer architectures based on short-chain fluorinated polymers have been designed for the dispersion polymerization of methyl methacrylate (MMA) in supercritical CO₂. Random copolymers composed of 2-(diisopropylamino)ethyl methacrylate (DPAEMA) and 2,2,3,3,4,4,4-heptafluorobutyl methacrylate (FBMA) or 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate were prepared with various comonomer ratios and utilized as stabilizers. It was found that the copolymers effectively stabilized PMMA latexes in CO₂, leading to the formation of free-flowing, spherical PMMA particles. With increase in the concentration of the stabilizer poly(FBMA-co-DPAEMA) from 2% to 6% (w/w with respected to MMA), the particles diameter decreased from 3.02 to 1.0 μm.     

Fabrication of block copolymer brushes on hollow sphere surface via reverse iodine transfer polymerization

The block copolymer brushes grafted from hollow sphere surface via reverse iodine transfer polymerization (RITP) were investigated in this work. A sufficient amount of azo initiator was introduced onto hollow sphere surface firstly. Then the monomer methyl methacrylate (MMA) was polymerized via surface-initiated reverse iodine transfer polymerization (RITP) using azo group modified hollow sphere as initiator. The microstructure of the samples was characterized by FT-IR, (1)H NMR, respectively. Results indicated that the poly(methyl methacrylate) (PMMA) with end functionality of alkyl iodine group had grafted from hollow sphere surface. TEM observations showed that the average diameter of hollow core was central at 1.3-1.4 μm and the average wall thickness increased from 103 nm to 138 nm and 172 nm after grafting polymerization of MMA and Tb complex, respectively. The closely linear plots of molecular weight (M(n)) versus conversion, linear kinetic plots for the free polymer formed in solution and the ability to extend the chains by sequential addition of monomer indicated that the RITP was a controlled process with a "living" characteristic.