Intramolecular reorientations and the effects of thermal history and hydrogen bonding in four closely related organic molecular solids

We have measured proton spin—lattice relaxation rates at 30 MHz from 77 to 330 K in para-di-t-butylbenzene, 2,5-di-t-butylphenol, 2,6-di-t-butylphenol, 3,5-di-t-butylphenol and modifications of the latter two in which the hydroxyl proton has been replaced with a deuteron.The observed maxima in the relaxation rates are interpreted in terms of the reorientations of the t-butyl groups and their constituent methyl groups. The observed relaxation rate depends, to some degree, on the thermal history of the samples and in the phenols this is attributed, in part, to the formation of dimeric and polymeric forms via intermolecular hydrogen bonding forming OH... O bridges. Infrared spectra are run with the three phenols in both the dilute liquid and solid state and the results interpreted in terms of hydrogen bonding. Nuclear spin relaxation due to the flip-flop of the hydroxyl proton is observed in 2,6-di-t-butylphenol but not in 3,5-di-t-butylphenol as expected on the basis of the IR spectra.     

Inhibitory effect of 2,6-di-<Emphasis Type="Italic">tert</Emphasis>-butylphenol groups in iron and manganese porphyrins on the catalytic activity in the oxidation of hydrocarbons by hydrogen peroxide

Iron and manganese porphyrins containing 2,6-di-tert-butylphenyl groups (R₄PFeCl and R₄PMnCl) have been synthesized to be further immobilized on silica gels via various spacers. The activity of these porphyrins in the oxidation of alkanes and alkenes by hydrogen peroxide has been studied. 2,6-Di-tert-butylphenol groups decrease the catalytic activity of porphyrins in oxidation processes.     

β-Hydroxyalkylation of sterically hindered phenols with epoxides in acid medium

Reactions of 2,6-dialkylphenols with ethylene oxide, propylene oxide and epichlorohydrin in the presence of SnCl₄ at the temperature from ?5 to +5°C leads to the formation of respective phenols containing a hydroxy group in the β-position of the aliphatic chain of the para-substituent. The conditions for maximum selectivity of the reaction of 2,6-di-tert-butylphenol with ethylene oxide were determined. By HPLC-MS method the directions of the side reactions were explored. The method has been successfully tested in a pilot installation. With 2,6-dimethylphenol instead of 2,6-di-tert-butylphenol a sharp increase occurs in the content of ethers in the reaction product. With epichlorohydrin, 2,6-di-tert-butylphenol affords a product, which is easily converted into an epoxide containing a sterically hindered phenol in its structure.     

Potassium and sodium 2,6-di-tert-butylphenoxides and their properties

The crucial factor of the reaction of 2,6-di-tert-butylphenol with alkali hydroxides is temperature, depending on which two types of potassium or sodium 2,6-di-tert-butylphenoxides are formed. These types exhibit different catalytic activity in the alkylation of 2,6-di-tert-butylphenol with methyl acrylate. More active forms of 2,6-Bu^t ₂C₆H₃OK or 2,6-Bu^t ₂C₆H₃ONa are synthesized at temperatures higher than 160 °C and are predominantly the monomers, which dimerize on cooling. The data of ¹H NMR, electronic, and IR spectra for the corresponding forms of 2,6-Bu^t ₂C₆H₃OK and 2,6-Bu^t ₂C₆H₃ONa isolated in the individual state are in agreement with cyclohexadienone structure. In DMSO or DMF, the dimeric forms of 2,6-di-tert-butylphenoxides react with methyl acrylate to form methyl 3-(4-hydroxy-3,5-di-tert-butylphenyl)propionate in 64–92% yield. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2138–2143, December, 2006.     

The complexes of multiimidazole with copper（Ⅰ） display tyrosinase activity

The six multiimidazole copper(Ⅰ)complexes are utilized to mimic tyrosinase.The main product is 3,5-di-t-butylcatechol from o-hydroxylation of the substrate 2,4-di-t-butylphenol.The highest yield of catechol is up to 82.2% and selectivity 94.8% by [Cu(I)_(3b)(MeCN)_2](ClO_4)_2 and O_2 under mild conditions,which are found to be more efficient than that already reported.     

New 1,1-amino hydroperoxides from regioselective oxygenation of 4-(n-arylmethyleneamino)-2,6-di-t-butylphenols.

The oxygenation of 4-(N-arylmethyleneamino)-2,6-di-$\text{t}$-butylphenols with Co(Salpr), a five coordinate Co(II0 Schiff base complex, in CH₂Cl₂ results in the regioselective hydroperoxylation at the imino carbon to give N-(l-aryl-l-hydroperoxymethyl)-3,5-di-$\text{t}$-butyl-$\text{p}$-benzoquinone monoimines, which give exclusively the corresponding amides and 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone in an aerobic solution of KOH in 90% EtOH.     

Template synthesis of polyaniline/Pd nanoparticle and its catalytic application

Pre-organization of Pd(II) species on polyaniline to form the corresponding d,π-conjugated complex provided a versatile route to a small and well-dispersed nanoparticle, which worked as an efficient redox catalyst for oxidative coupling reaction of 2,6-di-t-butylphenol.     

Catalytic activity of CuI/CuII cyanide based phenanthroline-bicarbonate system for enhancing aerobic oxidation of 2,6-di-tert-butylphenol

The metal organic framework {[Cu₂(CN)₃(phen)₃]5H₂O} MOF1- bicarbonate system was investigated as an efficient catalyst for aerobic oxidation of 2, 6-di-tert-butylphenol (2,6- DTBP). The catalytic system showed very efficient catalytic behavior for the oxidation of selective coupling of 2,6- DTBP to 3,3′,5,5′-tetra-tert-butyl-4,4′-diphenoquinone (DPQ) in excellent yield. The influence of reaction parameters on the selective oxidation of 2, 6-DTBP to DPQ had been investigated. Photoluminescence probing technology of Disodium salt of terephthalic acid as well as scavenging experiments revealed the creation of the hydroxyl radicals as the main active oxidation radicals produced by the MOF1/O₂/basic bicarbonate system. The oxidation reaction mechanism was also discussed. The recycled catalytic system retained its activity for eight successive runs.     

Synthesis and catalytic activity of binuclear cobalt(II) and nickel(II) complexes

Summary Binuclear Ni^II and Co^II complexes derived from 2,6-diformyl-4-methylphenol and various aromatic monoamines have been prepared and investigated. The Ni^II complexes have Ni₂LCl₃ composition while the Co^II complexes have Co₂L₂Cl₂ composition, where L represents the organic ligand. The complexes are active catalysts in the oxidation of 3,5-di-t-butylcatechol (3,5-DTBC) by dioxygen, but less so than their Cu analogues. This result is attributed to the absence of antiferromagnetic coupling between the metal centres.     

Amino-derivatives of usninic acid

Products from the reaction of usninic acid and 4-(3-aminopropyl)-2,6-di-t-butylphenol, 4-(2-aminoethyl)-2,6-di-t-butylphenol, antipyrine, N,N-diethylaminoethylamine, p-chloroaniline, and p-bromoaniline in addition to the quaternary ammonium salt (E)-2-(1-(6-acetyl-7,9-dihydroxy-8,9b-dimethyl-1,3-dioxo-1,9b-dihydrodibenzo[b,d]furan-2(3H)-ylidene)ethylamino)-N,N-diethyl-N-methylethaneammonium iodide were obtained.     

Electrochemical and spectroscopic characterization and catalytic activity of Co(II) complexes of tetra-chloro-R-Salen ([tClSalen= bis (3,5-di-chloro-α-R salicylidene)ethylenediamine]) and tetra-chloro-R-Salophen ([tClSalophen= bis (3,5-di-chloro-α-R salicylidene)-1,2-phenylenediamine]), R=H,CH3, CH2-CH3

A series of 3,5-tetra-chloro-R-Salen and 3,5-tetra-chloro-R-Salophen Co(II) complexes, (where R?=?H, CH₃, and CH₂-CH₃; Salen is bis(salicylaldehyde)ethylenediimine; and Salophen is bis(salicylaldehyde) N,N′-o-phenylendiimine) have been obtained. The synthesis and characterization of the free ligands and Co(II) complexes and also catalytic activity of the complexes are reported in this article. The characterization of the complexes was performed by elemental analyses, cyclic voltammetry, UV-Vis, FT-IR and EPR spectroscopy, and by elemental analyses, UV-Vis and FT-IR spectroscopy for the free ligands. The catalytic oxygenation of 2,6-di-tert-butylphenol, with these complexes, leads to the formation of two products, benzoquinone and diphenoquinone. In this process the Co(II) complexes form reversible adducts with molecular oxygen.     

Symmetric Borohydride Reduction of Ketones by Unsymmetrical Co(II) Chiral Salen Complexes

New unsymmetrical chiral Co(II) salen complexes were synthesized and the efficiency of these catalysts was examined in the enantioselective reduction of aromatic ketones. The higher level of enantioselectivity was attainable over chiral Co(II) salen complexes prepared from salicylaldehyde and 2-formyl-4,6-di-tert-butylphenol derivatives.     

Catalytic Activity of Polymer Anchored Cu-tren Complex in the Oxidation of 2,6-Di-t-butyl Phenol

Poly(styrene-co-dimethylaminoethyl methacrylate) and poly(methyl methacrylate-co- dimethylaminoethyl methacrylate) were prepared by solution polymerization. These polymers were quaternized by methyl iodide and n-hexyl bromide. The produced polymers were used as support in the aqueous oxidation of 2,6-di-tert-butylphenol (DBP) using hydrogen peroxide catalyzed by tris(2-aminoethyl)amine copper(II) complex “Cu(II)-tren complex” anchored on the prepared polymers. The products obtained from the reactions were 3,3′-5,5′-tetra-tert-butyldiphenoquinine (DPQ) and 2,6-di-tert-butyl-p-benzoquinone (BQ). No reaction products were obtained when the reaction was carried out in the absence of polymeric catalyst. The polymer composition and reaction medium greatly affect product distribution of the reaction. Polar organic solvent like DMF and methanol favor the formation of DPQ, while nonploar organic solvent like benzene and methylene chloride favor the formation of BQ. Hydrophobic branches of polymers 6 (PS-HexBr-Cu-TREN) and 8 (PMMA-HexBr-Cu-TREN) favor BQ formation as the weight of support increased. On the other hand, DPQ is favored in the presence of hydrophilic branches as observed for both polymeric catalysts 5 (PS-MeI-Cu-TREN) and 7 (PMMA-MeI-Cu-TREN).     

Reaction of superoxo Co(III) complexes with 2,6-di-t-butyl-p-benzoquinone methides

Superoxo Co(III) complexes derived from Co(Salpr) and [Co(CN)₅]^3? reacted with 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone methides to give 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone and 2,6-di-$\text{t}$-butyl-2,5-cyclohexadienonespirooxiranes as the main products, which are considered to result from nucleophilic attack by the superoxo species on the exo double bond of the quinone methides.     

Selective formation of peroxy-p-quinolato Co(III) complexes in the oxygenation of 4-alkyl-2,6-di-t-butylphenols with Co(II)-Schiff's base complexes

The oxygenation of 4-alkyl-2,6-di-$\text{t}$-butylphenols ($\text{2}$) with Co(II)-Schiff's base complexes in aprotic solvents such as CH₂Cl₂, THF, Py, and DMF leads to highly selective formation of the corresponding peroxy-$\text{p}$-quinolato Co(III) complexes. The reaction proceeds by mechanism involving a rate determining hydrogen abstraction by superoxo Co(III) species from $\text{2}$ giving phenoxy radical, rapid step of electron transfer from Co(II) complex to the phenoxy radical, and dioxygen incorporation into phenolato Co(III) complex thus formed.     

Synthesis of fullerene epoxide (C<Subscript>60</Subscript>O) by oxidation of fullerene C<Subscript>60</Subscript> with oxygen catalyzed by Mn(III), Ni(II), and Co(II) acetylacetonates

A procedure has been developed for the synthesis of fullerene monoepoxide C₆₀O via liquid-phase oxidation of fullerene C₆₀ in the presence of accessible catalysts [(Mn(acac)₃, Ni(acac)₂, and Co(acac)₂].     

Reactions of perfluoro(2-methylpent-2-ene) and perfluoro(5-azanon-4-ene) with primary amines containing a 2,6-di-tert-butylphenol fragment

Reactions of perfluoro(2-methylpent-2-ene) and perfluoro(5-azanon-4-ene) with 4-(2-aminoethyl)-2,6-di-tert-butylphenol and 4-(3-aminopropyl)-2,6-di-tert-butylphenol in acetonitrile in the presence of triethylamine gave the corresponding azetidine, 1,2-dihydroazete, and 1,2-dihydro-1,3-diazete derivatives, respectively. The reaction mechanisms, role of triethylamine, and factors affecting the intramolecular nucleophilic cyclization process are discussed.     

Good linear relationship between logarithms of Eigen’s water exchange constants for several divalent metal ions and activation energies of corresponding metal-catalyzed alkoxysilane hydrolysis in ethylene-propylene copolymer system

Catalytic efficiencies of seven divalent metal acetylacetonate complexes [M(acac)₂; M = Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II)] with respect to the water-crosslinking kinetics of vinyltrimethoxysilane-grafted ethylene-propylene copolymer (EPR-g-VTMS) were investigated to examine the effects of progressive changes in metal ion using ATR-FTIR spectroscopy. The hydrolysis activation energies of EPR-g-VTMS follows the order: No catalyst ≈ Ni(acac)₂ > Co(acac)₂ > Fe(acac)₂ ≈ Zn(acac)₂ > Cd(acac)₂ ≈ Cu(acac)₂ > Pb(acac)₂. Interestingly, the kinetics results revealed that the plots of hydrolysis activation energies of EPR-g-VTMS containing M(acac)₂ complexes and Eigen’s water exchange constants for corresponding metal ions showed a excellent linear relationship, suggesting that the reaction pathway for the silane water-crosslinking with hydrous M(acac)₂ complex in EPR-g-VTMS system may be similar to that for water exchange of the metal ion in an aqueous system. Based on the knowledge of traditional kinetics studies by Eigen and Wilkins and hybrid sol-gel chemistry, the plausible catalytic mechanism for M(acac)₂ complexes in EPR-g-VTMS system was proposed.     

Oxygenation of 4-(N-alkylimino)methyl-2,6-di-t-butylphenols mediated by Co(II)-Schiff base complex

4-(N-Alkylimino)methyl-2,6-di-$\text{t}$-butylphenols ($\text{1}$), Schiff bases of 3,5-di-$\text{t}$-butyl-4-hydroxybenzaldehyde can be oxygenated in the presence of Co(Salpr), a five coordinate Co(II)-Schiff base complex to give N-alkyl-3-$\text{t}$-butyl-5-formyl-2-hydroxy-2-pivaloyl-1,2-dihydropyridines ($\text{2}$ as the main product together with 3-formyl-2,5-di-$\text{t}$-butyl-2,4-cyclopentadienone ($\text{3}$) and 2,6-di-$\text{t}$-butyl-4-formyl-6-hydroxy-4,5-epoxy-2-cyclohexenone ($\text{4}$). These products result from dioxygen incorporation into the ortho position of $\text{1}$.     

Synthesis,electrochemical and in situ spectroelectrochemical studies of new transition metal complexes with two new Schiff-bases containing N2O2/N2O4 donor groups

New Schiff-base copper and cobalt complexes, [Cu(L¹)], [Cu(L²)] and [Co(L¹)], [Co(L²)] (where L¹ = N-N′-bis(3,5-di-tert-butylsalicylaldimine)-1,4-cyclohexane bis(methylamine) and L² = N-N′-bis(3,5-di-tert-butylsalicylaldimine)-1,8-diamino-3,6-dioxaoctane), were synthesized and characterized using elemental analysis, IR spectra, UV–Vis spectra, magnetic susceptibility measurements, ¹H and ¹³C NMR spectroscopy, thermal analysis and molar conductance (Λ_M). Their electro-spectrochemical properties were investigated using cyclic voltammetric (CV) and thin-layer spectroelectrochemical techniques in a dichloromethane solution (CH₂Cl₂). The CV of [Cu(L²)] showed a lower oxidation potential than that of [Cu(L¹)] under the same experimental conditions. The oxidation wave (II) of [Cu(L²)] was accompanied by an EC process (II′), which was not observed for [Cu(L¹)]. Also, [Cu(L²)] exhibited a reduction process, but [Cu(L¹)] did not. These results indicate that the Cu(II) ion in [Cu(L²)] is coordinated by N₂O₄ donor sites while [Cu(L¹)] presents a square-planar structure with N₂O₂ donor sites. Both oxidation processes for [Co(L¹)] and [Co(L²)] are based on the cobalt center, and they are assigned to Co(II)/Co(III) couples. The spectroelectrochemical results indicate that the oxidized species of [Cu(L²)] is similar to that of [Cu(L¹)], the only difference being that the absorption bands of the oxidized species for [Cu(L²)] shift to lower energy compared with those of [Cu(L¹)] because of their different coordination environment. The geometry of [Cu(L²)] changed into square-planar after the complex was totally oxidized and the neutral complex was only recovered following the EC process, as observed from the CV of [Cu(L²)]. For the two cobalt complexes, the bands corresponding to the π → π^∗transitions disappeared and new bands with small red shifts and of lower intensity were observed during the oxidation process. These new bands are attributed to the LMCT transition as observed in the case of the oxidation processes of the cobalt complexes.