高分子单链的研究进展

随着纳米科技在高分子领域的不断升温,高分子单链凝聚态的研究引起了人们的广泛重视。高分子单链以纳米尺度的微粒孤立存在,不存在分子链之间的几何缠结。本文综述了近年来国内外高分子单链的研究进展。首先介绍了高分子单链的主要制备方法如喷雾法、冷冻干燥法、微乳液聚合法、反向沉淀法以及表面扩展膜法,接着详细介绍了高分子单链的表征技术及高分子链构象的计算机模拟技术,最后介绍了高分子单链及单分子胶束在制备金属纳米粒子领域的应用,并展望了高分子单链的研究领域和方向。     

The study of structure formation in a polymer-containing ionic liquid in terms of the integral equation theory

The structural properties of a polymer-containing ionic liquid under the conditions of good solubility of a flexible polymer are studied theoretically. Two systems are discussed: In one, polymer solubility is due to the presence of specific interaction between polymer chains and solvent cations; in the other, polymer solubility is due to the presence of specific interactions between the polymer and solvent anions. The dependences of the structural characteristics of a solution on the polymer concentration and the energy of attraction between polymer chains and solvent ions are calculated. In a semidilute polymer solution, long-range correlations of polymer chains with a power dependence of the characteristic scale of ordering on the polymer density appear. The conditions under which, along with the intermediate ordering typical of a pure ionic liquid, the long-range ordering of the solvent cations and anions occur after addition of a polymer to the ionic liquid are studied.     

剪切作用对功能聚合物微观结构性能的影响研究

梳型聚合物和活性聚合物是目前常用驱油聚合物,其增黏性和黏弹性是评价其驱油能力的重要指标.为考察剪切作用对两种聚合物溶液性能的影响,分别研究了梳型聚合物和活性聚合物溶液经过模拟炮眼剪切前后的宏观和微观性能变化.结果表明,在高速剪切、拉伸应力作用下,梳型聚合物黏度损失率为40.73%,活性聚合物黏度损失率为70.10%;当剪切频率为0.02 Hz时,梳型聚合物界面扩张弹性降低了19.03%,而活性聚合物界面扩张弹性降低了68.03%;相比活性聚合物,梳型聚合物紧密的空间网状结构虽被部分破坏,但仍有疏松的网络结构,且以聚集体的形式紧密地分散在溶液中,通过DLS及AFM测定表明其粒径尺寸稍有变小;可见梳型聚合物抗剪切能力较活性聚合物强.     

Surface dilational moduli of polymer and blended polymer monolayers spread at air-water interfaces

Surface dilational moduli of polymer monolayers, blended polymer monolayers, and polymer particle monolayers spread at air–water interfaces are reviewed, focusing on measurements using surface pressure isotherm, surface pressure relaxation, and oscillating barrier methods. Differences between the surface dilational moduli of condensed polymer monolayers and expanded polymer monolayers are explored. Moreover, the features of the surface dilational moduli in blended polymer monolayers are discussed in terms of their miscibility.     

高分子稀溶液中偏离Huggins方程式的五种情况

在对高分子溶液的粘度研究中发现,在稀溶液中会出现五种偏离Huggins方程式的情况。本文就这五种情况作了较为详细的介绍,尤其就高分子－高分子和高分子－溶剂分子间的相互作用对二元体系（溶剂－聚合物）和三元体系（溶剂－聚合物A－聚合物B）粘度的影响进行了深入的讨论。     

高分子固体电解质设计的新概念

高分子固体电解质是开发零释放能源－－高性能电池的关键材料。本文详细介绍了20世纪90年代以来高分子固体电解质结构设计的新概念，包括高分子凝胶电解质，两相高分子电解质，盐掺聚合物（Polymer-in-salt)，有机／无机纳米复合型电解质，悬挂柔性短聚醚侧链的网格聚合物电解质。     

烯烃易位聚合研究新进展 在合成嵌段共聚物及功能高分子上的应用

本文详述了利用环烯烃开环易位聚合合成，ＡＢ，ＡＢＡ和星形嵌段共聚物，接枝共聚物，氧化还原性聚合物，侧链液晶高分子，导电高分子及含金属纳米聚合物材料，并对其具体合成线路作了概述。     

Friedel-Crafts Polymers. I. Self-Polycondensation of 4,4′-Dichloromethyldiphenyl Ether

Friedel-Crafts self-polycondensation of 4,4′-dichloromethyl-diphenyl ether (DDE) is studied under various experimental conditions. These polymer samples are infusible and are insoluble in all solvents. The polymer samples, PDs, are characterized by elemental analysis, IR spectral study, and by TGA. Polymer reaction products of one polymer sample are prepared by subjecting it to Friedel-Crafts reaction with excess benzene and by treating it with triethylamine. Both the polymer reaction products are found to be less stable than the parent polymer sample.     

聚合物互通多孔材料的乳液模板法制备及其功能化研究*

本文对近年来利用乳液模板制备聚合物互通多孔材料的研究进行了综述,主要介绍以高内相乳液模板制备互通多孔聚合物整体柱和利用双重乳液 (或称多重乳液) 制备多孔或多空聚合物微球的进展;分析目前多孔聚合物材料研究中存在的问题及其研究动态;讨论合成多孔聚合物材料的性能缺陷及其表面功能化改性的相关研究;并对聚合物互通多孔材料潜在的应用和研究前景进行了展望。     

Gel permeation chromatography with mixed eluents: Polymer solution as mobile phase

The GPC elution behaviour of a polymer was studied when a solution of another polymer in a liquid was used as an eluent. In ternary systems containing two polymers, GPC results are influenced by the thermodynamics of polymer incompatibility. The incompatibility manifests itself both in the slope of the dependence of elution volume upon the concentration of injected polymer and in the shift of elution volumes extrapolated to zero concentration. Experimental data for systems containing poly(styrene) and poly(methyl methacrylate) have been accounted for qualitatively by theoretical views on coil shrinkage resulting from polymer incompatibility. The concentration effects of the injected polymer and the polymer in the mobile phase on elution volume are compared; further parameters affecting the separation in the systems with polymer solution as eluent are discussed.     

聚合物熔体膜在基体表面的润湿和铺展行为

聚合物熔体膜在基体表面上的润湿和铺展行为受铺展系数和Hamaker常数影响。对于不能在基体表面上铺展的聚合物膜,当处于其玻璃化温度以上时,聚合物熔体膜将破裂,出现非连续区域。随着体系处于聚合物玻璃化温度以上时间的延长,非连续部分尺寸不断增长,增长速率与表面张力、聚合物粘度、聚合物液滴在基体表面的平衡接触角等因素有关,平衡后聚合物以液滴的形式在基体表面稳定存在。将带功能端基聚合物加入不能在基体表面上铺展的聚合物中,通过修饰聚合物与基体界面或改变聚合物熔体膜的表面张力,可以使原来不能在基体表面铺展的聚合物保持稳定。本文综述了聚合物熔体膜的铺展和润湿动力学研究进展,并归纳了使聚合物熔体膜稳定的方法。     

共轭聚合物发光和光伏材料研究进展

聚合物光电功能材料与器件因其广阔的应用前景,1990年以年来吸引了世界各国学术界的广泛关注和兴趣.聚合物光电子器件主要包括聚合物电致发光二极管、聚合物场效应晶体管和聚合物太阳能电池等,其使用的关键材料是共轭聚合物光电子材料,包括共轭聚合物发光材料、场效应晶体管材料和光伏材料等.本文主要对共轭聚合物电致发光材料和光伏材料的研究进展进行综述,介绍了这些聚合物材料的种类、结构和性质以及在聚合物电致发光器件和聚合物太阳能电池中的应用.并讨论了当前共轭聚合物光电子材料中的关键科学问题和今后的发展方向.     

高分子表面活性剂的分子设计

简要讨论高分子表面活性剂的俣成和表征方法，分析了在水溶液中两亲性聚合分子形态与表面活性的关系，单分子／多分子胶束多的形成是导致聚合物表面活性变差的主要因素，提出了高分子表面活性剂的分子设计原则，设计了多种在高分子量下将能够优质优良表面活性的高分子表面活性剂分子结构模型。     

Association and segregation in aqueous polymer/polymer,polymer/surfactant,and surfactant/surfactant mixtures: similarities and differences

Recent experimental findings on the phase behaviour of aqueous polymer/surfactant mixtures are reviewed and compared with the phase behaviour of “analogous” polymer/polymer or surfactant/surfactant mixtures, which is also reviewed. Polyelectrolyte effects are given special consideration. Attention is drawn to the polymer aspect of a surfactant aggregate, and, also, to the surfactant aspect of an hydrophobe-modified polymer. It is proposed that a consideration of these aspects should be helpful in predicting the phase behaviour of polymer/surfactant mixtures.     

智能高分子材料在智能给药系统中的应用

简要介绍了合成智能高分子材料、半合成智能高分子材料和天然智能高分子材料在智能给药系统中的应用研究进展,并展望了其在智能给药系统中的应用前景。     

高分子药物学的研究进展与期盼

自从20世纪70年代提出高分子前药的概念以来,伴随着纳米技术的发展,"高分子药物学"作为高分子科学和材料学、纳米科学、药物学、临床医学、分析科学的交叉学科,正在悄然形成.本文综述了近年高分子药物在药物化学、制剂学、药效学等方面所取得的进展,概述了高分子药物的药理学和药代动力学与小分子药物的区别与联系,指出了高分子药物药效学、药理学和药代动力学研究中的难题和瓶颈,特别是高分子药物可能存在的"三种状态"及从"纳米颗粒药"到"单个高分子药"再到"小分子药"的转变,分析了高分子药输送过程中存在的多重屏障如毛细血管壁、细胞外基质和细胞壁等,阐述了高分子药物的"生理靶向"和"EPR"效应的竞争,指出了高分子药在靶向输送和逆转耐药方面的优势,强调了发展相关分析方法的必要性,期盼高分子科学家与药物学家进行真诚有效的合作,大力促进我国高分子药物学和高分子药物产业的创新和发展.     

硅氧烷基聚合物电解质*

聚合物锂离子电池的核心技术是研制高离子传导率、适宜机械性能以及化学和电化学性能稳定的聚合物电解质材料。在众多寻求高性能聚合物电解质的研究工作中,由于硅氧烷基聚合物电解质具有灵活多样的分子结构设计、易于合成实施、优异的电化学性能和室温电导率等特点,一直是人们关注的热点领域。本文综述了近年来新型硅氧烷基聚合物电解质的设计与合成的研究工作,重点介绍了采用聚硅氧烷嵌段、接枝聚合物通过共混、互穿网络结构、交联网络结构以及无机-有机复合等方法开展的相关聚合物电解质的研究工作。同时也介绍了聚硅氧烷电解质的研究方法和基于聚硅氧烷电解质的应用研究进展。     

Active Layer Morphology Engineering of All-polymer Solar Cells by Systematically Tuning Molecular Weights of Polymer Donors/Acceptors

In all-polymer solar cells (APSCs),number-average molecular weights (Mns) of polymer donors and polymer acceptors play an important role in active layer morphology and photovoltaic performance.In this work,based on a series of APSCs with power conversion efficiency of approaching 10％,we study the effect of Mns of both polymer donor and polymer acceptor on active layer morphology and photovoltaic performance of APSCs.We select poly[4-(5-(4,8-bis(5-((2-butyloctyl)thio)thiophen-2-yl)-6-methylbenzo[1,2-b:4,5-b']dithiophen-2-yl)thiophen-2-yl)-5,6-difluoro-2-(2-hexyldecyl)-7-(5-methylthiophen-2-yl)-2H-benzo[d][1,2,3]triazole](CD1) as the polymer donor and poly[4-(5-(5,10-bis(2-dodecylhexadecyl)-4,4,g,9-tetrafluuoro-7-methyl-4,5,9,10-tetrahydro3a,5,8,10-tetraaza-4,g-diborapyren-2-yl)thiophen-2-yl)-7-(5-methylthiophen-2-yl)benzo[c][1,2,5]thiadiazole](PBN-14) as the polymer acceptor.The Mns of polymer donor CD1 are 14.0,35.5 and 56.1 kg/mol,respectively,and the Mns of polymer acceptor PBN-14 are 32.7,72.4 and 103.4 kg/mol,respectively.To get the desired biscontinueous fibrous network morphololgy of the polymer donor/polymer acceptor blends,at least one polymer should have high or medium Mn.Moreover,when the Mn of polymer acceptor is high,the active layer morphology and APSC device performance are insensitive to the Mn of polymer donor.The optimal APSC device performance is obtained when the Mn of both the polymer donor and the polymer acceptor are medium.These results provide a comprehensive and deep understanding on the interplay and the effect of Mn of polymer donors and polymer acceptors in high-performance APSCs.     

智能高分子材料在智能给药系统中的应用

简要介绍了合成智能高分子材料、半合成智能高分子材料和天然智能高分子材料在智能给药系统中的应用研究进展,并展望了其在智能给药系统中的应用前景.     

动态流变法在聚合物/聚合物界面分子链扩散研究中的应用

聚合物/聚合物界面的分子链扩散问题在塑料注塑、焊接、共混等领域普遍存在.动态流变法是研究聚合物/聚合物界面分子链扩散的一种有力手段,这种方法对于界面间分子链扩散的监测非常灵敏.本文简述了用动态流变法研究聚合物/聚合物界面扩散的原理、实验方法以及优点,着重讨论了采用该方法研究初始界面分子链末端分布对扩散机理的影响、对称聚合物/聚合物界面分子链扩散的量化,非对称聚合物/聚合物界面的相互扩散,分子量多分散性对聚合物/聚合物界面扩散的影响,聚合物/聚合物界面间的流动和扩散耦合以及近年来动态流变法在化学反应型聚合物/聚合物界面的应用进展.