Investigation of lipase-catalyzed Michael-type carbon–carbon bond formations

Conjugate additions of carbon nucleophiles to appropriate acceptor molecules were investigated with respect to the synthetic potential and stereochemistry of the products. Reactions of short-chain α,β-unsaturated ketones and mono-substituted nitroalkenes with CH-acidic carboxylic ester derivatives were catalyzed by various immobilized lipases. Using methyl nitroacetate complete conversion with methyl vinyl ketone and trans-β-nitrostyrene was obtained. The reactions proceeded without enantioselectivity. Evidence for enzyme catalysis is provided by the observation that after denaturation of Candida antarctica lipase B or inhibition no reaction took place. Docking studies with the chiral addition product methyl 2-methyl-2-nitro-5-oxohexanoate did not reveal any specific binding mode for this reaction product, which would have been the requirement for stereoselective additions. These results support the experimental findings that the conjugate addition takes place without enantiopreference.     

The influence of interunit carbon–carbon linkages during lignin upgrading

The cleavage of β-O-4 linkages in lignin can generate monomers with a phenyl propane structure that can easily be upgraded into valuable hydrocarbon biofuels and renewable aromatic chemicals. High-yield lignin monomer production from extracted (or technical) lignin that is produced in a practical way could facilitate the productivity and profitability of biomass conversion processes. However, interunit carbon–carbon (C–C) linkages present in native lignin or formed during lignin condensation in biomass pretreatments dramatically reduce lignin monomer yields. Here, we present a perspective on biological and chemical strategies that have been successfully used to reduce the formation of C–C linkages in native or technical lignin. We analyze the mechanisms involved in these strategies and offer our views on improving the quality of technical lignin resulting from biomass conversion in order to achieve high-yield lignin monomer production.     

Ni-catalyzed carbon–carbon bonds cleavage of mixed polyolefin plastics waste

The inert carbon–carbon(C–C) bonds cleavage is a main bottleneck in the chemical upcycling of recalcitrant polyolefin plastics waste. Here we develop an efficient strategy to catalyze the complete cleavage of C–C bonds in mixed polyolefin plastics over non-noble metal catalysts under mild conditions. The nickelbased catalyst involving Ni₂Al₃ phase enables the direct transformation of mixed polyolefin plastics into natural gas, and the gas carbon yield reaches up to 89.6%. R...     

Novel carboncarbon bond formation induced by depalladation of organometallic compounds

Two internal alkynes undergo insertion at 20°C into the PdC bond of the cyclopalladated derivative of dimethylaminomethylferrocene to give new organometallic compounds. When the reaction with diphenylacetylene is performed at higher temperatures, depalladation occurs readily to give six- and seven-membered ortho-fused rings through new annulation reactions of phenyl groups, formation of one of these involving also the cleavage of a CN bond.     

Solubility of monocrotaline in supercritical carbon dioxide and carbon dioxide—ethanol mixtures

The solubility of monocrotaline, a chemotherapeutic drug precursor, in supercritical carbon dioxide and carbon dioxide—ethanol mixtures has been measured from 308.15 to 328.15 K and from 8.86 to 27.41 MPa. The solubility ranges from 6.0 × 10⁻⁶ to 2.21 × 10⁻⁴ mol fraction increasing up to 25-fold with the addition of ethanol. A new method for the estimation of the sublimation pressure of monocrotaline was developed based on the measured solubilities of monocrotaline in water. The sublimation pressure was then used in the compressed gas model to correlate the behavior of carbon dioxide—monocrotaline and carbon dioxide—ethanol—monocrotaline systems with reasonable success.     

Ring-opening of cyclic ethers with carbon–carbon bond formation by Grignard reagents

The ring-opening of cyclic ethers with concomitant C–C bond formation was studied with a number of Grignard reagents. The transformation was performed in a sealed vial by heating to ∼160 °C in an aluminum block or at 180 °C in a microwave oven. Good yields of the product alcohols were obtained with allyl- and benzylmagnesium halides when the ether was tetrahydrofuran or 3,3-dimethyloxetane. Lower yields were obtained with substituted tetrahydrofurans while no ring-opening was observed with tetrahydropyran. Only highly reactive allyl and benzyl Grignard reagents participated in the transformation while no reaction occurred with other alkylmagnesium halides.     

Kinetics and mechanistic study of pyridinium hydrobromide perbromide-induced carbon–carbon bond scission

The title investigation shows that pyridinium hydrobromide perbromide (PHPB) induced electron transfer reaction in pentaamminecobalt(III) complexes of α-hydroxy acids

Observations of carbon–carbon coupling of 4,4'-dibromo-p-terphenyl on Cu(110) surface at molecular level

The carbon–carbon couplings of 4,4'-dibromo-p-terphenyl(DBTP) on Cu(110) surface have been investigated at a single molecular level by scanning tunneling microscopy. After annealing at 353 K, a mixture of parallel non-organometallic and organometallic intermediates of DBTP molecules along the[1–10] direction of the surface has been observed. Further annealing at 393 K causes one group of molecules to form oligomers with para-para and para-meta motifs via Ullmann reaction and the other group of molecules to synthesize oligomers with meta-meta motifs via direct carbon–carbon coupling reaction. Statistical results directly reveal that the occurrence of reaction type is strongly related to the initial binding configuration of DBTP molecules.     

Reduction of carbon dioxide by hydrogen on metal–carbon catalysts under supercritical conditions

The reduction of carbon dioxide with hydrogen on metal–carbon (Ru, Rh, Ir) catalysts is investigated under supercritical conditions for the first time. High selectivity (close to 100%) toward methanation with good stability of catalytic activity is observed for Ru- and Rh-containing catalyst, while the preferred reduction to CO is observed for Ir/C catalyst.     

Selective hydrogenation of phenol in supercritical carbon dioxide

Liquid phase hydrogenation of phenol over Pt/C catalysts was investigated under conventional conditions and supercritical carbon dioxide (scCO2). The equivalent ration of hydrogen to phenol shows a significant effect on the product selectivity. Hydrogenation of phenol in different solvents was also studied, the experimental results show that polarity of solvents influences the yield of cyclohexanone remarkably, scCO2 has the highest one. Catalytic hydrogenation of phenol in scCO2 or sub-sc…     

The SML pump of carbon cycles in oceans

1 Introduction Recently the concepts and models of “pump” are used frequently in studying global cycles and varieties of elements in marine chemistry and marine biogeo-chemistry. For example, there are many “pump” con-cepts including the concepts of s…     

Investigating detailed mechanism of hydrogen molecules adsorbing on single-wall carbon nanotubes using fitted force field parameters containing carbon–carbon interactions

The nonbonded and bonded force field parameters for carbon atoms in single-wall carbon nanotubes (SWNT) are fitted by means of quantum chemistry calculations with considering the periodic boundary conditions. The nonbonded parameters between carbon atoms and hydrogen atoms are fitted as well. All the fitted parameters are verified by comparing to quantum chemistry results and by calculating Young's modulus. Adsorption of Hydrogen molecules are then carried out on a bundle of self-assembled SWNTs. The adsorption isotherms are consistent to the Freundlich equation. Both hydrogen molecules adsorbed outside and inside the SWNTs are counted. According to our result, hydrogen molecules adsorbed inside the SWNTs are more stable at a relatively high temperature and are playing an important part in total amount of the adsorbed molecules. While C(10,10) have the highest adsorption capacities in most of the temperatures, hydrogen molecules inside C(5,5) are the most stable of all the four kinds of SWNTs. Thus, balancing adsorption capacities and strength of interaction can be important in choosing SWNT for gas adsorption. Besides, we deduct an equation that can describe the relation between hydrogen pressure and amount of SWNTs based on our simulation results. The hydrogen pressure may decrease by adding SWNTs in the system. The fitting method in our system is valid to SWNTs and can be tested in further studies of similar systems. © 2018 Wiley Periodicals, Inc.     

Analytical sensing of hydrogen peroxide on Ag nanoparticles–multiwalled carbon nanotube-modified glassy carbon electrode

A sensor based on silver nanoparticles (NPs)/multiwalled carbon nanotube (CNT)-modified glassy carbon electrode (GCE) was prepared and employed for accurate and rapid determination of hydrogen peroxide (H₂O₂). In summary, by using a mechanochemical method, multiwalled CNTs dispersed in ethanol and used for modification of GCE. After that, by using a double-pulse technique, silver NPs are electrodeposited on surface of multiwalled CNTs/ GCE. Parameters that are affected by electrocatalytic reduction of H₂O₂ on the modified electrode, such as multiwalled CNT concentration and double-pulse parameters, were optimized using Minitab software. The optimal modified electrode was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and cyclic voltammetry. The proposed H₂O₂ sensor exhibited excellent characteristics for the sensing of H₂O₂, such as wide linear range from 0.1 to 10 mM, a low detection limit of 2 μM, high repeatability, and no interference by a number of substances.     

Photosolvolysis of a carboncarbon bond. The photolysis of n,n-dimethyl- 2,2-diphenylethylamine in methanol.1

The title compound is photolyzed in methanol to give good yields (ca. 50%) of diphenylmethane indicating that the CC bond undergoes a formal heterolytic cleavage from the excited state as predicted from the measured redox potentials of the two ions.     

Sensitive electrochemical determination of calcium dobesilate on the carbon–iron nanoparticle modified glassy carbon electrode

A carbon–iron nanoparticle modified glassy carbon electrode (CIN-GCE) has been developed for the determination of calcium dobesilate (CD) in pharmaceutical formulations. The CINs were characterized by Transmission electron microscopy and X-ray diffraction. It was found that the CIN has strong electrocatalytic effect for CD and leads to a greatly improved anodic detection of CD including higher sensitivity and better reproducibility. A detection limit of 2.0 × 10⁻⁷ M (S/N = 3) was obtained. The proposed CIN-GCE was applied to detect CD in pharmaceutical formulations with satisfactory results. The proposed CIN electrochemical sensing platform holds great promise for simple, rapid and accurate detection of CD in pharmaceutical formulations.     

Molecular simulation of the Joule–Thomson inversion curve of carbon dioxide

The complete Joule–Thomson (JT) inversion curve for carbon dioxide is calculated using molecular simulations. A two center Lennard–Jones model with an embedded point quadrupole is used to model the fluid–fluid interactions. The simulation results agree quantitatively with all available experimental data. Comparison with commonly used equations of state provides only a modest agreement, with the highest discrepancies being observed at the high temperature branch of the inversion curve.     

Solubility measurement of α-asarone in supercritical carbon dioxide

The solubility of α-asarone in supercritical CO₂ (sc-CO₂) has been measured using the dynamic method. The measurement was conducted in the pressure range from 9.0 to 18.0 MPa at temperature 35–49 °C. The experimental data were correlated using the Chrastil model. The results show that the solubility increases as the pressure rises and decreases as the temperature rises, which is well correlated with the Chrastil model.     

Reaction of β-trifluoroethoxy vinamidinium salts with carbon nucleophiles

β-Trifluoroethoxy vinamidinium salts 1 reacted smoothly with various types of the carbanions, generated by treatment of ketones, esters, amide and nitriles with LDA, to give the corresponding trifluoroethoxylated multifunctional dienamine derivatives 3 in moderate to good yields. On the other hand, the reaction of 1 with lithium acetylide and other carbanions derived from methyl compounds bearing sulfonyl, sulfinyl, and phosphonyl groups produced the corresponding α,β-unsaturated aldehydes 5 in good yields.