Speciation of copper(II) complexes in an ionic liquid based on choline chloride and in choline chloride/water mixtures

A deep-eutectic solvent with the properties of an ionic liquid is formed when choline chloride is mixed with copper(II) chloride dihydrate in a 1:2 molar ratio. EXAFS and UV-vis-near-IR optical absorption spectroscopy have been used to compare the coordination sphere of the cupric ion in this ionic liquid with that of the cupric ion in solutions of 0.1 M of CuCl(2)·2H(2)O in solvents with varying molar ratios of choline chloride and water. The EXAFS data show that species with three chloride ions and one water molecule coordinated to the cupric ion as well as species with two chloride molecules and two water molecules coordinated to the cupric ion are present in the ionic liquid. On the other hand, a fully hydrated copper(II) ion is formed in an aqueous solution free of choline chloride, and the tetrachlorocuprate(II) complex forms in aqueous choline chloride solutions with more than 50 wt % of choline chloride. In solutions with between 0 and 50 wt % of choline chloride, mixed chloro-aquo complexes occur. Upon standing at room temperature, crystals of CuCl(2)·2H(2)O and of Cu(choline)Cl(3) formed in the ionic liquid. Cu(choline)Cl(3) is the first example of a choline cation coordinating to a transition-metal ion. Crystals of [choline](3)[CuCl(4)][Cl] and of [choline](4)[Cu(4)Cl(10)O] were also synthesized from molecular or ionic liquid solvents, and their crystal structures were determined.     

Ionic liquid analogues formed from hydrated metal salts

A dark green, viscous liquid can be formed by mixing choline chloride with chromium(III) chloride hexahydrate and the physical properties are characteristic of an ionic liquid. The eutectic composition is found to be 1:2 choline chloride/chromium chloride. The viscosity and conductivity are measured as a function of temperature and composition and explained in terms of the ion size and liquid void volume. The electrochemical response of the ionic liquid is also characterised and it is shown that chromium can be electrodeposited efficiently to yield a crack-free deposit. This approach could circumvent the use of chromic acid for chromium electroplating, which would be a major environmental benefit. This method of using hydrated metal salts to form ionic liquids is shown to be valid for a variety of other salt mixtures with choline chloride.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

Synthesis and Characterization of Ammonium-, Pyridinium-, and Pyrrolidinium-Based Sulfonamido Functionalized Ionic Liquids

New homologous ammonium-, pyridinium-, and pyrrolidinium-based sulfonamido functionalized ionic liquids have been synthesized in two steps using monoethanolamine, methanesulfonyl chloride, and tosyl chloride as precursors with ethanol as solvent. Attempts to synthesize dual amino functionalized ionic liquid containing both a primary and a secondary amine group in the same ionic liquid are also reported. All functionalized ionic liquids were characterized by ¹H and ¹³C NMR. Melting point and thermal stability of the functionalized ionic liquids were measured by differential scanning calorimetry and thermogravimetric analysis.     

Physical–chemical properties of nickel analogs ionic liquid based on choline chloride

In this paper, a homogeneous, green analogs ionic liquid containing choline chloride and nickel chloride hexahydrate is formed. The structure of the analogs ionic liquid is preliminary investigated by Fourier transform infrared spectroscopy. It is shown that the nickel chloride hexahydrate bond via hydrogen bonds with choline chloride and urea. The physico-chemical properties of the analogs ionic liquid such as viscosity, conductivity, density, and thermal stability are measured as a function of temperature and composition. The thermal expansion coefficients (r), the molar Gibbs energy of activation (ΔG*) for viscous flow, the molar enthalpy of activation (ΔH*), and the molar entropy of activation (ΔS*) for viscous flow have been calculated. A straight-line equation is used to fit the density data while the Arrhenius equation is used to fit both viscosity and conductivity. Thermal stability of analogs ionic liquid was carried out from room temperature to 973.15 K. It indicates that analogs ionic liquid is stable from room temperature to 488.2 K.     

Organic solvent nanofiltration in asymmetric hydrogenation: enhancement of enantioselectivity and catalyst stability by ionic liquids

This communication describes the enhancement of the enantioselectivity and the stability of Ru-BINAP with the ionic liquid trihexyl(tetradecyl)phosphonium chloride (CyPhos101), and the use of organic solvent nanofiltration for the efficient separation of the catalyst and ionic liquid from the hydrogenation product, followed by simultaneous recycling of the catalyst and ionic liquid.     

Glucose solvation by the ionic liquid 1,3-dimethylimidazolium chloride: a simulation study

Simulations of beta-glucose in the ionic liquid 1,3-dimethylimidazolium chloride have been performed in order to examine the solvation environment of the carbohydrate. Both single molecule and 1:5 glucose:ionic liquid (16.7 wt %) solutions are studied, and the hydrogen bonding between sugar and solvent is examined. The primary solvation shell around the perimeter of the glucose ring consists predominantly of chloride anions which hydrogen bond to the hydroxyl groups. A small presence of the cation is also found, with the association occurring through the weakly acidic hydrogen at the 2-position of the imidazolium ring interacting with the oxygen atoms of the sugar secondary hydroxyls. An average chloride coordination number of 4 is found around the glucose for both the single molecule and high concentration simulations, despite the reduced chloride:glucose ratio in the latter case. In relation to the cation, the glucose molecules occupy positions above and below the plane of the imidazolium ring. Importantly, even at high glucose concentrations, no significant change in the anion-cation interactions and overall liquid structure of the ionic liquid is found, indicating that the glucose is readily accommodated by the solvent at this concentration. Dominant contributions to the sugar-ionic liquid interaction energy come from favorable hydrogen bonding (electrostatic) interactions between hydroxyls and chlorides, although a small favorable van der Waals energy contribution is also seen between the sugar and cations suggesting that the cation could be tailored in order to further improve the dissolution of glucose/cellulose in ionic liquid systems.     

离子液体[bmim]Cl-CrCl2促进的Reformatsky反应研究

用无水氯化铬(CrCl2)和氯化1-丁基-3-甲基咪唑([bmim]Cl)制备了离子液体[bmim]Cl-CrCl2, 考察了CrCl2与[bmim]Cl物质的量比以及离子液体与底物物质的量比对Reformatsky反应的影响, 研究了[bmim]Cl-CrCl2促进不同底物发生的Reformatsky反应. 结果表明, 离子液体[bmim]Cl-CrCl2不仅能促进醛、酮与α-溴代酸酯的反应, 以极好的产率得到β-羟基酸酯; 而且能较好地诱导α-溴代苯乙酮与醛、酮的反应, 以较高的产率得到β-羟基酮. 该离子液体经处理后可以重复使用, 是一种Reformatsky反应的绿色化学方法.     

Thermochemistry of mixing imidazole-based ionic liquids with water and organic solvents

The results of the calorimetric studies of the enthalpies of mixing of some ionic liquids, 1-butyl-3-methylimidazolium chloride and acetate, with water, pentanol, dimethyl sulfoxide and dimethylformamide are presented. Protic solvents interact with the ionic liquid anion, wheras aprotic, with the cation. The mixing enthalpy depends on the dissociation degree of the ionic liquid.     

室温离子液体中催化合成肉桂酸苄酯

研究离子液体中肉桂酸钾和氯化苄经缩合合成肉桂酸苄酯的新方法,并对多种离子液体的作用性能进行了考察.研究结果表明,离子液体中BMImBF4的催化性能最佳,但是肉桂酸苄酯的收率仍不高,只有当相转移催化剂四丁基氯化铵存在时,肉桂酸钾与溶于离子液体中的氯化苄在温和的反应条件下才可高效率地得到肉桂酸苄酯,收率可达96.5%.产物分离简单,离子液体和相转移催化剂形成的双催化体系可以稳定地循环使用5次以上.     

Al electroplating on the AZ121 Mg alloy in an EMIC–AlCl3 ionic liquid containing ethylene glycol

To improve the corrosion resistance of Mg alloys, an Al layer was electrodeposited on the Mg surface from an ionic liquid of 1-ethyl-3-methylimidazolium chloride (EMIC) and aluminum chloride (AlCl₃) at 283?K. A smooth surfaced Al electrodeposit can be electroplated in the AlCl₃–EMIC ionic liquid by pulse electrolysis at 6.7?Hz and a duty ratio of 0.67. A denser and flatter Al layer was successfully electroplated on AZ121 substrate at the lower temperature of 283?K in an AlCl₃–EMIC ionic liquid with 0.1?M ethylene glycol added.     

The regiospecific Fischer indole reaction in choline chloride.2ZnCl2 with product isolation by direct sublimation from the ionic liquid

The Fischer indole synthesis occurs in high yield with one equivalent of the ionic liquid choline chloride[middle dot]2ZnCl(2); exclusive formation of 2,3-disubstituted indoles is observed in the reaction of alkyl methyl ketones, and the products readily sublime directly from the ionic liquid.     

Physicochemical properties of ionic liquid analogue containing magnesium chloride as temperature and composition dependence

The ionic liquid analogue containing MgCl₂ based on choline chloride and glycerol was reported. The solubility of MgCl₂ in the ionic liquid analogue based on choline chloride and glycerol was measured from T?=?293?C393?K. The empirical equation about the solubility and temperature was obtained. Thermal analysis showed that the ionic liquid analogue was stable from room temperature to 140?°C. The physical properties such as conductivity ??, density ?? and viscosity ?? of ionic liquid analogue were measured as function of the content of MgCl₂ and temperature. An empirical equation about the density (??) and temperature was obtained. The ions transport behaviours are analyzed using hole-theory. It is shown that the conductivity of the ionic liquid analogues is controlled by the ion mobility and the suitable voids.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

Amino-functionalized ionic liquid as a nucleophilic scavenger in solution phase combinatorial synthesis

A new functionalized ionic liquid, 1-aminoethyl-3-methylimidazolium hexafluorophosphate was synthesized from 1-methylimidazole and 2-bromoethylamine hydrobromide. This ionic liquid was found to be an efficient scavenger for removing excess electrophiles, such as benzoyl chloride, p-toluenesulfochloride, phenyl isothiocyanate, and p-chlorophenyl isocyanate, in a solution-phase parallel synthesis. The resulting ionic liquid derivatives can be separated directly from the reaction mixture. Desired products were obtained with high purity. Only 1.5-2.0 equiv of this scavenger was needed with a sequestration time of less than 35 min. In addition, the used ionic liquid can be regenerated and recycled several times without significant loss of activity.     

细胞色素C在离子液体修饰电极上的电化学行为

分别合成了疏水和亲水性咪唑类离子液体,并制备了相应的两种离子液体修饰的玻碳电极。循环伏安法测量结果显示,细胞色素C在离子液体修饰的玻碳电极上的电子传递过程为一扩散控制的准可逆反应,表明咪唑类离子液体也可用作细胞色素C电子传递的有效促进剂。电化学交流阻抗谱的测量结果得到了与循环伏安相同的结论。     

Fluorous imidazolium room-temperature ionic liquids based on HFPO trimer

Imidazole substituted with a polyfluoropolyether chain based on HFPO trimer combined with various polyfluoroalkyl triflates produced novel highly fluorous ionic liquids. Their metathesis with four different anions generated a final set of 20 fluorous ionic liquids of waxy or viscous liquid character, which are all soluble in perfluorinated solvents. Two model reactions using selected ionic liquid, the opening of a THF ring with benzoyl chloride under Friedel-Crafts conditions and substitution of benzyl chloride with sodium azide, led to decomposition of the ionic liquid. However, Diels-Alder reaction of 2,3-dimethylbuta-1,3-diene with dimethyl acetylenedicarboxylate in a fluorous ionic liquid resulted in a reasonable enhancing of the reaction rate with smooth recycle of the fluorous solvent. The fluorophilicity of these fluorous ionic liquids ranges from more than 10 for water, toluene or dichloromethane to less than 0.2 for acetonitrile or methanol.     

Significant changes of the charge distribution at the surface of an ionic liquid due to the presence of small amounts of water

The influence of small amounts of water dissolved in 1-hexyl-3-methylimidazolium chloride ([C(6)mim][Cl]) on the composition of the surface of the ionic liquid is investigated with the depth profiling technique neutral impact collision ion scattering spectroscopy. The concentration depth profiles of the elements in the sample were determined at three different water concentrations and show that small amounts of water affect the charge distribution in the ionic liquid along the surface normal. At low water concentrations (2500 ppm) the cation shows a strong presence at the surface with the alkyl chains oriented towards the gas phase, followed by a layer of anions below the alkyl chains of the cation. At higher water content (6000 to 10,000 ppm) the chloride anion shows an increased concentration at the ionic liquid surface while the alkyl chains move towards the bulk showing that the surface charge becomes more negative with increasing water content. The effect is attributed to the influence of water on the hydrogen bonding network in the ionic liquid.     

[Amim]Cl离子液体中微波辐射加热促进稻草秸秆酸水解制备还原糖

在1-烯丙基-3-甲基咪唑氯盐([Amim]Cl)离子液体介质中,用微波辐射加热促进稻草秸秆纤维素的酸水解,探讨了微波辐射加热及离子液体对酸催化植物纤维素水解的促进作用;并对水解产物中的还原糖进行了测定,着重考察了离子液体用量、硫酸浓度、微波功率、反应温度、反应时间等因素对还原糖收率的影响.结果表明,在[Amim]Cl...     

Highly Efficient and Stable Palladium Nanoparticles Supported on an Ionic Liquid Silica Sol?Gel Modified Electrode

A carbon ionic liquid electrode modified with a thin layer of silica sol? gel containing phosphinite ionic liquid was prepared for deposition of palladium nanoparticles. Palladium nanoparticles were formed easily by simple contact of the modified electrode with palladium chloride solution. The novel material overcomes the shortcomings of conventionally modified electrodes with a thin layer of silica sol? gel, due to the existence of ionic liquid in silica matrix. A crack‐free sol? gel matrix was obtained and also, the uniform porous structure of the ionic liquid‐sol? gel matrix resulted in a fast mass transport and increased ionic conductivity. The electrode exhibits high electrocatalytic effects towards hydrazine and ascorbic acid. It is very stable against repetitive cycling in the applied potential window.