Selective non-chromatographic determination of tributyltin in sediments using EDTA and diphenylcarbazone as masking agent

Two analytical procedures based on the generation of volatile tributyltin derivatives, their separation by headspace solid-phase microextraction (HS SPME) and subsequent determination using plasma optical emission spectrometry (OES) have been developed for the selective determination of trace tributyltin (TBT) in the presence of other butyltins and inorganic tin in sediments without the use of chromatography. A microwave-assisted leaching of tin compounds from the sediment using 25%_v/v acetic acid is applied for sample pretreatment. The first method takes advantage of TBT chloride releasing from the lecheate after adding 3 M hydrochloric acid, and subsequent separation of the analyte by HS SPME using Carboxen-poly(dimethylsiloxane) (CAR/PDMS). The second method involves the use of masking agents, namely ethylenediaminetetraacetic acid (EDTA) and diphenylcarbazone (DFC), which form stable chelates with monobutyltin (MBT) and dibutyltin (DBT), respectively, followed by the ethylation of tributyltin at pH 5 using sodium tetraethylborate (NaBEt4) solution. The final concentration of NaBEt4 is 0.05%_w/v. The parameters affecting the TBT derivatisation and separation by HS SPME have been optimised including the selection of SPME fibre coating (PDMS, CAR/PDMS), the amount of masking agents and NaBEt4 added, sorption time (2–40 min) and sorption temperature (25–60°C). Higher sensitivity and robustness are attained with the method involving ethylation derivatisation, leading to the limit of detection (LOD) of 3 ng L^?1. The selective release of TBT is observed from aqueous solutions, where the concentrations of MBT and DBT were in 2–50-fold excess to TBT. The SPME-TD-MIP-OES methods have been validated against several certified reference materials (CRMs), including SOPH-1 marine sediment, PACS-2 marine sediment and BCR 646 freshwater sediment.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Organometallics in the nearshore marine environment of Australia

This review draws together published information on the occurrence and biogeochemical cycling of selenium, arsenic and tin in the nearshore marine environment of Australia. The selenium content of marine organisms is well documented but little information is available on the selenium content of waters and sediments. The speciation of selenium in organisms, water and sediments is unknown although it appears that selenium is associated with proteins. The occurrence and speciation of arsenic in marine organisms has been extensively studied, with arsonobetaine being isolated as the probable end-product of arsenic metabolism in marine food chains. However, organisms can produce other organoarsenic compounds, e.g. trimethylarsine oxide, which may be metabolized to toxic end-products. Little is known about the occurrence and speciation of arsenic in waters and sediments. Arsenic(V) is dominant in oxygenated waters, with appreciable quantities of arsenic(III) in some deoxygenated waters. There are few data for tin in water, sediments or organisms and no data on naturally occurring tin species. Tributyltin has been measured in water, sediment and organisms from areas affected by boating activity.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Focused ultrasound and molecularly imprinted polymers: a new approach to organotin analysis in environmental samples

There is a high interest in speciation of organotin compounds (OTCs) in biota and marine sediment samples, due to their influence in the transmission of the contamination in the trophic chain. Sample treatment is still the most "compromising" step of speciation analysis. Extraction methods are in general time-consuming due to long extraction times and several analytical steps involved. In addition, in most cases there are problems of low recovery, especially for MBT. These drawbacks, added to the high matrix effects generally present in biota samples, make the sample treatment for organotin analysis a serious challenge for environmental issues. Here we present a novel, fast and efficient two steps method for organotin speciation in mussel and oyster tissue as well as in marine sediments. The first step based on the use of ultrasonic probe extraction for species leaching allowed us to quantitatively extract these compounds in a few minutes. Matrix interferences drastically decreased by applying a clean-up step based on the use of an imprinted polymer especially designed for tributyltin (TBT). This procedure increased accuracy and precision of the GC-FPD analysis and improving the limit of detection, Besides, this new method prevents the use of standard addition calibration method, which is mandatory without the clean-up step. The optimization and validation has been performed by using three reference materials: mussel tissue CRM-477, oyster candidate T-38 and sediment PACS-2.     

Tartaric acid extraction of organotin compounds from sediment samples

A new extraction method for the determination of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediments based on extraction with tartaric acid and methanol has been developed. Tin species were extracted from sediment samples using focused microwave technology, then ethylated with sodium tetraethylborate (NaBEt₄) and analyzed by isotope dilution (ID) gas chromatography-mass spectrometry (GC-MS). The advantages of such methodology in comparison with other established extraction methods for the routine speciation analysis of organotin compounds are discussed with respect to sulfur interferences co-extracted from complex matrices.Interferences from elemental sulfur are normally found with acetic acid extraction, but with tartaric acid extraction these interferences were eliminated, demonstrating selective extraction.The accuracy of the analytical procedure was established by analyzing a certified reference material (CRM) (PACS-2, marine sediment) and comparing the results to the certified values. Good agreement between determined and certified values for butyltin compounds was obtained. Finally, some complex sediment samples collected from San Vicente's Bay, Chile, were analyzed with the proposed methodology, demonstrating its potential value for monitoring butyltins in environmental samples with high concentrations of sulfur compounds.     

A quantitative extraction method for the determination of trace amounts of both butyl- and phenyltin compounds in sediments by gas chromatography-inductively coupled plasma mass spectrometry

A simple and reliable extraction method was developed for quantitative determination of both butyl- and phenyltin compounds in sediments by capillary gas chromatography combined with inductively coupled plasma mass spectrometry (GC-ICP-MS). Both types of organotin compounds were extracted quantitatively from sediment by mechanical shaking into tropolone-toluene and HCl-methanol. After phase separation and pH adjustment, these organotins were ethylated with sodium tetraethylborate. The method was evaluated by analyzing PACS-2 and NIES No. 12 sediment certified reference materials. The dibutyltin (DBT; 1.14 +/- 0.02 micrograms g-1) and tributyltin (TBT; 1.01 +/- 0.04 micrograms g-1) values observed in PACS-2 sediment closely matched the certified values (DBT, 1.09 +/- 0.15; TBT, 0.98 +/- 0.13 microgram g-1 as tin). The monobutyltin (MBT) value was higher (0.62 +/- 0.02 microgram g-1) by more than two fold over the reference value (0.3 microgram g-1 as tin). The concentrations of TBT (0.18 +/- 0.04 microgram g-1) and triphenyltin (TPhT; 0.0099 +/- 0.002 microgram g-1) in the NIES No. 12 sediment were also in good agreement with the certified and reference values of TBT (0.19 +/- 0.03 microgram g-1 as compound) and TPhT (0.008 microgram g-1 as compound), respectively. Recoveries of TBT, tripentyltin (TPeT) and TPhT from spiked sediments were satisfactory (TBT, 102 +/- 3.4%; TPrT, 96 +/- 3.4%; TPhT, 99 +/- 8.5%). The detection limits as tin were in the range 0.23-0.48 ng g-1 for a 0.5 g sample size. It is also noteworthy that clean-up of the extract is not necessary because of the superior selectivity of ICP-MS detection. The present method was successfully applied to marine sediment samples.     

Atomic absorption spectrometric screening and gas chromatographic-mass spectrometric determination of organotin compounds in marine mussels: an application in samples from the Venetian Lagoon

A new analytical approach for the determination of organotin compounds (OTC) in mussel samples has been developed and evaluated. A preliminary step, performed by graphite furnace atomic absorption spectrometry (GFAAS) for the total tin determination may be followed by gas chromatographic-mass spectrometric (GC/ MS) speciation only for the characterization of those samples exhibiting total tin concentration higher than 30 ng/g wet weight (GFAAS limit of detection). The GFAAS method was optimized using Pd nitrate under reducing conditions as matrix modifier to minimize NaCl interferences. Organotins were derivatized with a Grignard reagent for GC/MS analysis (TBT limit of detection = 80 ng/g). An application of this strategy was performed on mussel samples collected from the Venetian Lagoon.     

Simultaneous determination of mono-, di- and tributyltin in environmental samples using isotope dilution gas chromatography mass spectrometry

The development of a rapid, precise and accurate speciation method for the simultaneous determination of mono-, di- and tributyltin in environmental samples is described. The method is based on using isotope dilution gas chromatography/mass spectrometry (GC/MS) with electron ionization, a widely used technique in routine testing laboratories. A mixed spike containing (119)Sn-enriched monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) was used for the isotope dilution of the samples. Five molecular ions were monitored for each analyte, corresponding to the (116)Sn, (117)Sn, (118)Sn, (119)Sn and (120)Sn isotopes. The detection at masses corresponding to (116)Sn and (117)Sn were used to correct for m + 1 and m + 2 contributions of (13)C from the organic groups attached to the tin atom on the (118)Sn, (119)Sn and (120)Sn masses with simple mathematical equations and the concentrations of the butyltin compounds were calculated based on the corrected (118)Sn/(119)Sn and (120)Sn/(119)Sn isotope ratios. The (119)Sn-enriched multispecies spike was applied with satisfactory results to the simultaneous determination of MBT, DBT and TBT in three certified reference materials: two sediments, PACS-2 and BCR 646, and the mussel tissue CRM 477. The method was compared with a previously published GC/inductively coupled plasma MS isotope dilution procedure, developed in our laboratory, by injecting the same samples into both instruments. Comparable analytical results in terms of precision and accuracy are demonstrated for both atomic and molecular mass spectrometric detectors. Thus, reliable quantitative organotin speciation analysis can be achieved using the more widespread and inexpensive GC/MS instrument.     

Selective preconcentration and determination of tributyltin in fresh water by electrothermal atomic absorption spectrometry

A rapid and simple method for separation and determination of tributyltin (TBT) in mineral and tap water is described. The procedure is based on the selective retention of TBT by a chelating resin, Amberlite XAD-2 impregnated with tropolone. The addition of 0.8% sulfuric acid to the water sample leads to the retention of TBT by the resin while monobutyltin (MBT), dibutyltin (DBT) and inorganic tin remain in solution. TBT is eluted with methyl isobutyl ketone (MIBK) obtaining a preconcentration factor of 80. Tin concentration is determined by ETAAS using zirconium coated tubes. Multi-injection and hot injection techniques are used in order to enhance the sensitivity of the method. A detection limit of 14.4 ng L(-1) is achieved with recoveries near to 100%. The procedure has been successfully applied to TBT determination in various fresh water samples.     

Electrochemical speciation of organotin compounds in water and sediments. Application to sea water after ion-exchange separation

For the quantitative speciation of tributyltin, Bu₃Sn⁺ (TBT), in the presence of dibutyltin, Bu₂Sn²⁺ (DBT), monobutyltin, BuSn³⁺ (MBT), triphenyltin, Ph₃Sn⁺ (TPT), and inorganic tin in water samples and sediments, an accurate, reproducible, simple and rapid electrochemical method was developed. After extraction of the organotin compounds with dichloromethane, TBT could be selectively determined as species by alternating current polarography directly in the organic phase without any derivatisation. The successful application of this technique could be proved by the results obtained by intercomparison exercises on TBT in water samples and sediments, organized by the Community Bureau of Reference (BCR). For the application of this technique to sea water samples a preliminary ion exchange separation of TBT from the major components of sea water was performed, achieving a detection limit for TBT in the ppt range.     

Determination of tributyltin in marine sediment and waters by pressurised solvent extraction and liquid chromatography-tandem mass spectrometry

In this study, tributyltin (TBT) was extracted from marine sediment matrix with the use of pressurised solvent extraction (PSE), which uses high-temperature and -pressure conditions to increase extraction efficiency. The analyte was chromatographically resolved using a liquid chromatography-tandem mass spectrometry (LC-MS/MS) system with a pentafluorophenyl (PFP) column and a methanol/aqueous formic acid mobile phase gradient, and was detected by MS/MS as product fragments after collisionally induced dissociation (CID) of the cationic parent molecule. This study represents the first application of PSE extraction combined with LC-MS/MS analysis for the determination of TBT in sediments. The method has been validated according to the International Organisation for Standardisation (ISO) 17025:2001 and affords automated extraction of sediment samples with high-sensitivity analysis. The full method limit of detection was established as 1.25 ng Sn g^?1 with an instrument detection limit of 0.01 ng Sn g^?1. The chromatographic procedure may also be applied for the direct analysis of water matrices without the need for sample manipulation, and therefore represents a combined analytical approach for the monitoring of TBT contamination in marine or estuarine ecosystems.     

Isotope dilution analysis mass spectrometry for the routine measurement of butyltin compounds in marine environmental and biological samples

The highly qualified primary method of species-specific isotope dilution analysis has been employed in this work to evaluate for the first time the levels of butyltin compounds in the estuary of the river Eo (Northwest Spain) where there is, since many years, a high oyster farming activity. A spike solution containing mono-, di- and tributyltin enriched in ¹¹⁹Sn allowed the simultaneous determination of the three compounds in different marine environmental and biological samples collected in this area (seawater samples, sediments and biological tissues of four different marine species). The results obtained in this work showed toxic TBT levels for many marine species in 45% of the seawater samples analyzed whereas significant organotin concentrations were found to be obtained only in one of the sediments analyzed. On the other hand, TBT levels ranging from 20 to almost 200 ng g^− 1 (dry weight) were obtained in the different biological tissues analyzed demonstrating the bioaccumulation of organotin compounds in certain marine species.     

Determination of butyltin compounds in environmental samples by isotope-dilution GC–ICP–MS

Isotope-dilution analysis in combination with GC-ICP-MS detection has been applied to the determination of butyltin species in environmental samples. Different spikes containing the isotopically labeled butyltin species have been synthesized in the laboratory after optimization of the reaction conditions. The isotopic compositions of the tin species in the different spike solutions were determined by GC-ICP-MS after derivatization by aqueous ethylation with sodium tetraethylborate. Reverse isotope-dilution analysis was used for quantitation of the spike solutions by means of natural MBT, DBT, and TBT standards. The mixed spikes were used for simultaneous analysis of MBT, DBT and TBT in the certified reference materials, PACS-2, CRM 462, and CRM 646, with satisfactory results. The excellent agreement of the different speciation results obtained by use of the different spikes is a good indicator of the precision, accuracy, and reliability which can be achieved by using isotope-dilution analysis for trace metal speciation.Application of a double spike containing (119)Sn-enriched MBT (79.7 At%), (118)Sn-enriched DBT (86.7 At%), and (119)Sn-enriched TBT (83.1 At%) also enabled evaluation of the conditions resulting in quantitative extraction of the species from the solid matrix, in combination with possible alterations depending on the different extraction procedures used (mechanical shaking, ultrasounds, and microwaves). Mathematical equations used for this purpose computed the correct species concentrations directly and, additionally, the decomposition factors (from TBT to DBT and from DBT to MBT) after precise measurement of the (119)Sn/(120)Sn and (118)Sn/(120)Sn ratios for all butyltin species by GC-ICP-MS.     

Acid extraction treatment of sediment samples for organotin speciation; occurrence of butyltin and phenyltin compounds on the cadiz coast,south-west spain

A method is described for leaching of nanogram amounts of mono-, di and tri-butyltin compounds and mono-, di- and tri-phenyltin compounds from sediments. The procedure is based on soaking the sediments in a water–hydrogen bromide mixture (2:3) with magnetic stirring for 1 h followed by extraction with 0.02% (w/v) tropolone solution in pentane for 2 h. Organotins are determined by GF FPD after clean-up through a Florisil column and derivatization by Grignard pentylation. The method has been applied to the study of water and sediments in different areas of south-west Spain. Predominant species are butyltins, especially tributyltin (TBT), which has high values in waters and sediments of Puerto de Santa Maria and Cadiz Bay, as well as in sediments of the Sancti Petri Channel, which suggests a harmful action on biota. A direct relation has been found beween organotin levels and distance of potential focus determined by boating activities. In addition, the relative occurrence of dibutyltin (DBT) and monobutyltin (MBT) together with TBT has been noted, possibly as a result of a degractation process, and the influence of grain size of sediment and presence of organic matter on organotin accumulation has been studied.     

Search for triorganotins along the Mar del Plata (Argentina) marine coast: finding of tributyltin in egg capsules of a snail Adelomelon brasiliana (Lamarck, 1822) population showing imposex effects

Cases of imposex were clearly identified in Adelomelon brasiliana living in the Mar del Plata (Argentina) coastal area; percentages as high as 50.0% were determined among the samples studied. These were the first reported cases of ocurrence of imposex in this type of gastropod. Since this is one of the known tributyltin (TBTs) effects, and no previous reports of determination of TBTs in gastropods eggs were found, methods were developed for the speciation and quantitative determination of organotins in A. brasiliana egg capsules. Determination of organotins in samples collected in the Mar del Plata area showed contents of tributyltin chloride (TBT) as high as 400 ng l^?1 in water and 6.50 µg g^?1 in sediments of areas of intensive boat traffic. The results showed the presence of TBT in the egg capsules of A. brasiliana at three different instars (range 0.264–1.86 µg per egg). As far as we know, this is the first report of the finding of TBT in gastropod egg capsules. Copyright © 2004 John Wiley & Sons, Ltd.     

Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

不同基体改进剂对石墨炉原子吸收法测定土壤和沉积物中铊的影响

应用Pd(NO3)2-抗坏血酸(Vc)基体改进剂,建立了石墨炉原子吸收法(GFAA法)测定土壤和沉积物样品中铊。针对土壤和沉积物复杂基体,GFAA法测定铊元素主要受到氯离子的干扰,文中研究了常见基体改进剂(包括NH4NO3,(NH4)2SO4,La(NO3)3,Mg(NO3)2,Vc,Pd(NO3)2,Pd(NO3)2-Vc)对氯离子的抑制效果。通过研究不同基体改进剂测定含氯铊标准溶液的吸收曲线,探讨出基体改进剂测定铊的作用机理。以土壤或沉积物标准物质为研究对象,优化了应用Pd(NO3)2-Vc测定铊的灰化温度、基改剂浓度以及原子化温度。在最佳实验条件下,通过比较有无基体改进剂条件下,采用GFAA法测定不同土壤和沉积物中铊的精密度和准确度,实验结果表明,应用Pd(NO3)2-VC基体改进剂,测定土壤和沉积物标准物质中铊的测定结果都在标准值范围之内,6次平行测定的相对标准偏差范围为2.8%~8.4%,用于测定实际土壤和沉积物样品加标回收率为128.0%和92.9%。     

Tributyltin speciation in aquatic matrices by CGC-FPD and CGC-MS confirmation

An analytical procedure for the determination of tributyltin (TBT) in seawater, sediments and biota is described. Extraction of TBT as chloride is achieved by hydrochloric acid treatment followed by a liquid extraction using a modified solvent with a metal coordinating ligand, and a Grignard derivatization (CH₃MgCl). The organotin fraction was isolated from the derivatized extract by column chromatography. The final determination was accomplished by on-column capillary gas chromatography (CGC) coupled to a flame photometric detector (FPD) and mass spectrometry (MS) confirmation. The relative detection limits of the analytical procedure were dependent of the environmental compartment, 0.5 ng 1^–1 (as TBT) for seawater, and 0.1 ng g^–1 and 0.4 ng g^–1 for sediments and biota, respectively. The TBT recovery of fortified samples was in the range of 90% for water and biota, and of 60% in case of sediments. The reproducibility (RSD) of the whole procedure for three independent replicates was around 15%.     

连续萃取法研究海湾养殖区沉积物中重金属形态

以连续萃取法研究海湾养殖区沉积物中重金属(Cd, Cu, Pb, Zn)的形态,将重金属分离为酸溶态、还原态、有机质结合态、硫化物结合态和残渣态.分别采用基体匹配法和内标法消除高盐基体对电感耦合等离子体光谱法(ICP-OES)和质谱法(ICP-MS)分析结果的影响.对海洋沉积物标准物质分析结果表明,样品稀释后测定值与标准值一致.比较了本连续萃取法和BCR法对沉积物样品中重金属形态的提取结果,并考察了萃取剂的选择性.实验表明,本方法可用于有机质污染和富营养化环境沉积物中重金属形态分析,特别是有机质结合态和硫化物结合态的分析.