Zerovalent metal polymer composites. II. Metal–polymer microdispersions

Metallization of water-soluble polymers incorporating metal-binding ligand is achieved by binding palladium ions at substoichiometric quantities, followed by reduction to polymer–zero-valent palladium complex and deposition of transition metal ions by electroless plating solutions. The polymers studied include poly[N,N,N-trimethyl-N-(m- and p-vinylbenzyl)ammonium chloride], poly-L -glutamic acid, poly-L -lysine, and a copolymer of 2-phenylhydroquinone-2-amino-phthalic acid. Noble metal polyelectrolyte solutions were directly reduced with dimethylamineborane to stable microdispersions. The reactive nickel, cobalt and copper microdispersions were coated on KODAK ESTAR filmbase. Scanning electron microscopy (SEM), ESCA, and IR were used for material characterization. Conductivity and magnetic properties were also measured. Hydrophobic materials such as graphite and fluorinated graphite were metallized in organic solvents using hydrophobic trioctylammonium–tetrachloropalladate as the activating noble metal complex. The metallized conductive graphites were evaluated for their electrochemical properties.     

The elimination of metal(I) hydride in the mass spectra of some metal(II) compounds

Metal(I) hydrides are eliminated as neutral species in the electron impact ionization mass spectra of copper(II) and palladium(II) complexes of ethylene-N,N′-3-benzoylprop-2-en-2-amine. Deuterium labelling shows that the hydrogen atom of the metal(I) hydride is derived predominantly from the ethylene bridge both for ion source reactions and for metastable ion transitions. Evidence supporting the proposed rationalization for elimination of metal(I) hydride is provided by the observation of an analogous reaction in the mass spectrum of (ethylene-N,N′-salicylaldiminato)copper(II). The mass spectrum of ethylene-d₄-N,N′-3-benzoylprop-2-en-2-amine shows an unusual rearrangement to give [C₇H₅D₂]⁺ ions involving a formal phenyl-to-methylene transfer.     

Zerovalent metal polymer composites. I. Metallized beads

Binding of a noble metal salt, e.g., PdCl to a functional ligand on a polymer surface, e.g., amine, quaternary ammonium, sulphonic acid, followed by reduction to zerovalent state and subsequent reductive deposition of transition metal ions, such as copper, nickel, and cobalt, provides a sequence of events leading to controlled zerovalent metal polymer composites. Metallization of submicron and larger beads are described. Large amounts of metal can be incorporated. The metallized beads retain the shape of the starting beads, even at high bonding of metal. They adapt the properties of the metal, e.g., magnetic properties. The submicron particles are sensitive to hydrolysis. Multicomponent systems, such as multimetallic beads, are provided by additive codeposition of metal ions, or by codeposition of metal and dye. Direct deposition of metal to preimmobilized dye ligands is also possible, leading to magenta, cyan, or yellow metallic beads, with no adverse influence on the magnetic properties. Further deposition of noble metals by subtractive deposition on active metal surfaces is also described. Submicron latices can be immobilized by coating on polyester-based films, e.g., KODAK ESTAR base, and then activated with palladium and metallized to form highly conductive film surfaces.     

Distribution of polymer deposition in plasma polymerization. I. Acetylene,ethylene, and the effect of carrier gas

Factors which influence the distribution of polymer deposition in an electrodeless glow-discharge system were investigated for acetylene and ethylene. Under the conditions in which “full glow” is maintained, the distribution of polymer deposition from pure monomer flow systems is nearly independent of flow rate of monomer or of the system pressure in discharge, but is largely determined by the characteristic (absolute) polymerization rates (not deposition rate) of the monomers. Acetylene has a high tendency to deposit polymer near the monomer inlet, whereas ethylene deposits polymer more uniformly in wider areas in the reactor. The addition of carrier gas such as argon or partially copolymerizing gas such as N₂, H₂, and CCl₂F₂ was found to narrow the distribution of polymer deposition. The distribution of polymer deposition is also influenced by a glow characteristic which is dependent on flow rate and discharge power.     

Design of unique titanium oxide photocatalysts by an advanced metal ion-implantation method and photocatalytic reactions under visible light irradiation

The metal ion-implantation of titanium oxide with various transition metal ions was carried out by applying by high voltage acceleration. The subsequent calcination of the implanted TiO₂ in oxygen at around 723 K resulted in a large shift in the absorption spectra of the TiO₂ toward visible light regions, its extent being dependent on the amount and the kind of metal ions implanted. Such metal ion-implanted titanium oxide catalysts were active in carrying out various photocatalytic reactions such as the decomposition of NO into N₂, O₂ and N₂O at 275 K under irradiation with visible light longer than 450 nm. The application of this advanced, high energy metal ion-implantation method enables the novel design of titanium oxide photocatalysts which can absorb and initiate vital reactions under visible light and will contribute to the development of catalytic systems utilizing solar energy.     

Some remarks on the dynamics of polymer melts

Considering one long chain (N monomeric units) in a homodisperse melt of chemically identical, but shorter, “solvent” chains (P monomers per chain), we propose some tentative scaling laws for the self-diffusion constant D(N) and the relaxation time T(N) of the solute chain. We also discuss the viscosity increment δ_η due to a small volume fraction Φ of the long chains. We find three regimes of behavior, depending on N and P, and on the distance between entanglement points (assumed smaller than N and P): (A) reptation of the N chain; (B) Stokes–Einstein regime; the solute moves like a usual polymer coil in a viscous fluid of P chains; (C) mixed regime, where D(N) is controlled by reptation, while δ_η is of type B. Contrary to our earlier belief, we find no significant regime where the process of “tube renewal” could be dominant.     

A compact fluorescence/circular dichroism dual-modality probe for detection,differentiation, and detoxification of multiple heavy metal ions via bond-cleavage cascade reactions

Selective detection of multiple analytes in a compact design with dual-modality and theranostic features presents great challenges. Herein, we wish to report a coumarin-thiazolidine masked d-penicillamine based dual-modality fluorescent probe COU-DPA-1 for selective detection, differentiation, and detoxification of multiple heavy metal ions (Ag⁺, Hg²⁺, Cu²⁺). The probe shows divergent fluorescence (FL) /circular dichroism (CD) responses via divergent bond-cleavage cascade reactions (metal ion promoted C-S cleavage and hydrolysis at two distinctive cleavage sites): FL “turn-off” and CD “turn-on” for Ag⁺ (no hydrolysis), FL “turn-on” and CD “turn-off” for Hg²⁺ (imine hydrolysis), and FL “self-threshold ratiometric” and CD “turn-off” for excess Cu²⁺ (lactone and imine hydrolysis), providing the first example of a fluorescence/CD dual-modality probe for multiple species with complimentary responses. Moreover, the bond-cleavage cascade reactions also lead to the formation of d-penicillamine heavy metal ion complexes for potential detoxification treatments.     

Synthesis and metal binding properties of novel sulfur-containing functional oligomer

The synthesis and metal ion binding properties of a new class of functional oligomers are described. Oligo[1-(N-phenylthiocarbamoyl)aziridine] (DP ca. 8) and its analogs are prepared by ring-opening oligomerization of the corresponding aziridine monomers in good yields. These oligomers contain sulfur groups capable of binding “soft” metal ions, and the selective binding properties of the novel oligomer for Cu(II) and Hg(II) ions are investigated by liquid-solid adsorption and liquid-liquid extraction experiments.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Anionic polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole

The polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole by an anionic mechanism has been demonstrated. Polymerization reactions were monitored by ultraviolet/visible spectroscopy and λ_max and ε values for the propagating carbanions determined. The 2-vinyl monomer exhibits all the features of a standard “living” polymer; the carbanion is stable at ambient temperatures and high molecular weight, M?_n ? 10⁶, narrow distribution polymers and block copolymers with styrene have been prepared. The carbanion from the 3-vinyl monomer is much less stable and a clean polymerization can only be conducted at temperatures below -60°C. A comparison of the anionic polymerization characteristics of the N-, 2-, and 3-vinyl carbazole monomer series is presented.     

Photochemistry of polymeric systems. II. Photocrosslinking of polymers and copolymers containing various aromatic N-oxide groups

2-Methyl-5-vinylpyridine-N-oxide, 4-vinylquinoline-N-oxide. 9-vinylacridine-N-oxide, p-N,N-dimethylaminostyrene-N-oxide units were introduced in polymeric chains as homopolymers or/and as styrene copolymers to study their photocrosslinking. The method used for characterization of photocrosslinked films was a “photoresist test” described in Part I of this series. The photosensitivity of the different chromophores bound to the different polymer has also been studied by UV, IR, and fluorescence spectrophotometries. The use of aromatic amine N-oxide groups in polymers seems to be a general means to produce their photocrosslinking by radical reactions. Among the different polymeric materials prepared, 4-vinylpyridine-N-oxide and 4-vinylquinoline-N-oxide are the most photosensitive.     

Synthetically Important Alkali‐Metal Utility Amides: Lithium,Sodium, and Potassium Hexamethyldisilazides,Diisopropylamides, and Tetramethylpiperidides

Most synthetic chemists will have at some point utilized a sterically demanding secondary amide (R₂N^?). The three most important examples, lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS), lithium diisopropylamide (LiDA), and lithium 2,2,6,6‐tetramethylpiperidide (LiTMP)—the “utility amides”—have long been indispensible particularly for lithiation (Li‐H exchange) reactions. Like organolithium compounds, they exhibit aggregation phenomena and strong Lewis acidity, and thus appear in distinct forms depending on the solvents employed. The structural chemistry of these compounds as well as their sodium and potassium congeners are described in the absence or in the presence of the most synthetically significant donor solvents tetrahydrofuran (THF) and N,N,N’,N’‐tetramethylethylenediamine (TMEDA) or closely related solvents. Examples of hetero‐alkali‐metal amides, an increasingly important composition because of the recent escalation of interest in mixed‐metal synergic effects, are also included.     

Thiazoles polycycliques. I. Substitution par les nucléophiles anioniques des dérivés 2-méthylsulfonylés de la thiazolo[5,4-b]-pyridine et du benzothiazole

Substitution reactions of 2-methylsulfonyl thiazolo[5,4-b]-pyridine (3) and 2-methylsulfonyl benzothiazole (10) by nucleophilic anionic reagents were studied. In N,N-dimethylformamide, at 20°, these reactions are fast, particularly with compound 3 . Also studied were the kinetics of the substitution by sodium methylate, and the pK_a′s of the acidic compounds. This work allows the comparison of benzothiazole with its “7-aza” analog.     

An investigation of the abnormal products from the reaction of 2-thenyl and benzyl grignard reagents by gas chromatography.

The products of the reaction of 2-thenylmagnesium chloride (I) with a variety of reagents has been studied by gas chromatography. Carbon dioxide and ethylene oxide produced significant amounts of 5-substituted (“para”) products as well as 3-substituted (“ortho”) and normal addition products. Several other reagents, including acetyl chloride and formaldehyde, produced mainly “ortho” products along with small amounts of normal products. The dependence of product distribution on temperature, added salts and solvent character was found to correlate with the reported rates of inversion about the carbon-magnesium bond in primary Grignard reagents. Blocking the “ortho” position, in 3-methyl-2-thenylmagnesium chloride, increased the proportion of “para” product from 3 to 33%. In addition, the reactions of benzylmagnesium chloride with certain reagents were re-examined.     

Polymerization of N-carbazolylacetylene by various transition metal catalysts and polymer properties

N-Carbazolylacetylene (CzA) was polymerized in the presence of various transition metal catalysts including WCl₆, MoCl₅, [Rh(NBD)Cl]₂, and Fe(acac)₃ to give polymers in good yields. The polymers produced with W catalysts were dark purple solids and soluble in organic solvents such as toluene, chloroform, etc. The highest weight-average molecular weight of poly(CzA) reached about 4 × 10⁴. In the UV–visible spectrum in CHCl₃, poly(CzA) exhibited an absorption maximum around 550 nm (ε_max = 4.0 × 10³ M⁻¹ cm⁻¹) and the cutoff wavelength was 740 nm, showing a large red shift compared with that of poly(phenylacetylene) [poly(PA)]. Poly(CzA) began to lose weight in TGA under air at 310°C, being thermally more stable than poly(PA) and poly[3-(N-carbazolyl)-1-propyne]. Poly(CzA) showed a third-order susceptibility of 18 × 10⁻¹² esu, which was 2 orders larger than that of poly(PA). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2489–2492, 1998     

New biocidal metal complexes of bisphenol-A formaldehyde polymer containing piperazine

The polymeric ligand (BFP) was synthesized by condensation of bisphenol-A, formaldehyde, and piperazine in alkaline medium at 70–80°C. The polymer–metal complexes were synthesized by the reaction of BFP with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) acetates in 1?:?0.5 (ligand?:?metal) molar ratio. All the synthesized polymers were characterized by elemental, spectral (infrared, ¹H-NMR, and UV-Vis), magnetic moment measurements, and thermal (TGA) analysis. The ligand-field and nephelauxetic parameters have been determined from UV-Vis spectra using ligand-field theory. Elemental analyses indicate the association of water with metal for Mn(II), Co(II), and Ni(II), which is also supported by TGA. The antimicrobial activities of the synthesized polymers were studied by agar well diffusion methods against Bacillus subtilis, Bacillus megaterium, Staphylococcus aureus, Escherichia coli, Salmonella typhi, Pseudomonas aeruginosa, and Shigella boydii. The antimicrobial activity and thermal stability of Cu(II)–polymer were higher than the other polymer–metal complexes due to the higher stability constant of Cu(II).     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999     

Theory of polydisperse reacting polymer systems

The kinetics of irreversible reactions between polymer chains of different molecular weights are studied, with emphasis on the case of highly reactive end groups. We calculate the rate constant k(N, M) for reaction between chains of lengths N and M respectively, in dilute and semi-dilute solutions and in the melt. In all cases, k(N, M) is dominated by the shortest chain: the limit k(N) ≡ k(N, ∞) is well-defined and scales as if both chains were of length N. In dilute solutions k(N, M) obeys mean field theory, being proportional to the equilibrium reactive group contact probability. For melts and concentrated solutions, k(N, M) follows diffusion-controlled laws: k(N, M) ≈ (R/τ_N)ƒ(M/N) where R_N and τ_N are the coil size and relaxation time of the shortest chain N, and ƒ(M/N) is a cross-over function describing the approach to the asymptotic form k(N) for M/N ≫ 1. We calculate the leading contributions to this cross-over function, which has universal forms depending on the concentration regime. The implications of these results for high-conversion free-radical polymerization are discussed.     

Variation of the ℏω with the particle number and the appearance of “kinks” for atomic clusters

The dependence of the harmonic oscillator (HO) energy level spacing ?ω on the particle number N is studied analytically for atomic (metal) clusters on the basis of their electronic densities, parametrizing Ekardt's results (for sodium clusters) by means of a Fermi distribution. An interesting feature of such an approach is that it leads, under the assumptions made, to “kinks,” that is, to “marked discontinuities in the slope” of ?ω at the closed shells. These discontinuities diminish as N increases. For large N, ?ω becomes simply: ?ω?c₁N^?1/3+c₂N^?1. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Multicomponent Organic Metal Halide Hybrid with White Emissions

Zero‐dimensional (0D) organic metal halide hybrids, in which organic and metal halide ions cocrystallize to form neutral species, are a promising platform for the development of multifunctional crystalline materials. Herein we report the design, synthesis, and characterization of a ternary 0D organic metal halide hybrid, (HMTA)₄PbMn_0.69Sn_0.31Br₈, in which the organic cation N‐benzylhexamethylenetetrammonium (HMTA⁺, C₁₃H₁₉N₄⁺) cocrystallizes with PbBr₄^2?, MnBr₄^2?, and SnBr₄^2?. The wide band gap of the organic cation and distinct optical characteristics of the three metal bromide anions enabled the single‐crystalline “host–guest” system to exhibit emissions from multiple “guest” metal halide species simultaneously. The combination of these emissions led to near‐perfect white emission with a photoluminescence quantum efficiency of around 73 %. Owing to distinct excitations of the three metal halide species, warm‐ to cool‐white emissions could be generated by controlling the excitation wavelength.