Polyimides containing carbonyl and ether connecting groups

Geveral new polyimides were prepared from the reaction of four aromatic dianhydrides with four new diamines containing carbonyl and ether connecting groups between the aromatic rings. The diamines were prepared from the reaction of 4-aminophenol with activated aromatic difluoro compounds in the presence of potassium carbonate. Several of these polyimides were shown to be semicrystalline as evidenced by wide angle x-ray diffraction and differential scanning calorimetry. Glass transition temperatures ranged between 192 and 247°C and crystalline melt temperatures were observed between 350 and 442°C. The polyimide from the reaction of 3,3′,4,4′-benzophenonetetracarboxylic acid dianhydride and 1,3-bis(4-aminophenoxy-4′-benzoyl)benzene provided a semicrystalline solvent resistant transparent film with high tensile properties and compression molded compact tension specimens with high fracture toughness.     

Polyimides containing carbonyl and ether connecting groups. III

Several new polyimides were prepared from the reaction of three aromatic dianhydrides with two new methyl substituted aromatic diamines containing carbonyl and ether connecting groups between the aromatic rings. The diamines were prepared from the reactions of 3-methyl-4-aminophenol and 3,5-dimethyl-4-aminophenol with 1,3-bis(4-fluorobenzoyl) benzene in the presence of potassium carbonate. The 300°C cured polyimides containing methyl substituents were shown to be armorphous by wide angle X-ray diffraction and exhibited glass transition temperatures between 231–281°C. The properties of these new polyimides containing methyl substituents were compared with polymides of the same chemical structure but without methyl substituents.     

Polyimides having pendant hydroxy and acetoxy groups. II. Polyimides derived from bisaminoalcohols

Polyamic acids were prepared from bisaminoalcohols and pyromellitic dianhydride. They were converted to polyimides having pendant hydroxy groups by heating them in toluene or xylene (η_inh = 0.22–0.34 dl/g). Treatment of these polyamic acids with a mixture of pyridine and acetic anhydride gave polyimides having pendant acetoxy groups (η_inh = 0.22–1.04 dl/g). These acetoxypolyimides were converted to hydroxypolyimides (η_inh = 0.20–0.81 dl/g) by an ester-exchange reaction. Furthermore, the hydroxypolyimides were easily acetylated to give acetoxypolyimides.     

A theoretical study of structure-solubility correlations of carbon dioxide in polymers containing ether and carbonyl groups

This work involves a theoretical study to investigate the effects of the structure on CO(2) sorption in polymers, where poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), poly(vinyl acetate) (PVAc), poly(ethylene carbonate) (PEC) and poly(propylene carbonate) (PPC) were examined. In the theoretical approach, the multi-site semiflexible chain model and the renormalized technique of electrostatic potentials were incorporated into the polymer reference interaction site model (PRISM). To test the theory, molecular dynamic simulations were performed using the TraPPE-UA force field. The theoretically calculated reduced X-ray scattering intensities and intermolecular correlation functions of these five polymers are found to be in qualitative agreement with the corresponding molecular simulation data. The theory was then employed to investigate the distribution functions between CO(2) and different sites of the polymers with consideration of the Lennard-Jones, potential of mean force, and columbic contributions. Based on the detailed structure characteristics of CO(2) in contact with different groups, the CO(2) coordination molecular numbers were obtained and their sorption intensities analyzed. Finally, the sorption isotherms of CO(2) in these five polymers were calculated. The results for PEO, PPO and PVAc are close to the available experimental curves, and the trend of CO(2) solubility is PPC > PEC > PVAc ~ PPO > PEO.     

Thermal properties of nylons containing carbonyl groups

Nylons containing carbonyl groups in backbone chains were prepared and their response to heat was studied. The carbonyl groups were introduced using either HOOC(CH₂)₄CO(CH₂)₄COOH or H₂N(CH₂)₅CO(CH₂)₅NH₂ in the initial monomer compositions. In addition to pyrolysis of these polyamides, the progress of chemical and physical changes as a function of temperature was continuously monitored and analyzed by FT–IR spectroscopy on cast films placed in an environmental chamber. Introduction of the carbonyl groups into the polymer backbone resulted in a significant reduction of the thermal stability of the corresponding polyamide. Possible mechanisms for the thermal degradation entailing these carbonyl groups and N-acylamide compounds are discussed.     

Polyetherimides. I. Preparation of dianhydrides containing aromatic ether groups

A general synthetic method and characterization of bis(ether anhydride)s, the ether containing aromatic dianhydrides of the following structure, are presented. The method involves aromatic nitro-displacement of N-substituted 3- or 4-nitrophthalimide with bisphenoxides to form N-substituted arylene-bis(phthalimido)ethers or bis(ether imide)s. Sixteen structurally different bis(ether imide)s have been prepared and subsequently converted to the corresponding bis(ether anhydride)s. Bis(ether anhydride)s are stable crystalline compounds of a moderate reactivity. Unlike highly reactive dianydrides such as pyromellitic and benzophenonetetracarboxylic dianhydrides bis(ether anhydride)s are semipermanently stable against hydrolysis in the presence of atmospheric moisture.     

Photochromic liquid-crystalline copolymers containing crown ether groups

An approach was developed for the synthesis of new multifunctional photosensitive liquid-crystalline copolymers of the acryl series containing azobenzene, ionophoric, and mesogenic groups in the same macromolecule. The phase behavior of the copolymers was studied. Most of these copolymers were demonstrated to form nematic mesophases. An increase in the concentration of crown-containing groups to 26 mol.% leads to amorphization of the copolymers. The influence of complexation of the crown ether groups of the copolymers with potassium perchlorate on the mesomorphic properties of the systems was investigated. A comparative study of the photooptical properties of the copolymers in solution and thin films was performed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2332–2242, December, 2007.     

Polyimides containing oxyethylene units

Four aromatic dinitro compounds containing oxyethylene units 1,2-bis(4-nitrophenoxy)ethane, bis(2)-(4-nitrophenoxy)ethyl ether, 1,2-bis(2)-(4-nitrophenoxy)ethoxy)ethane, and bis(2-(2-(4-nitrophenoxy)ethoxy)ethyl) ether were prepared by an aromatic nucleophilic substitution reaction that involved 1-fluoro-4-nitrobenzene and the appropriate oxyethylene glycol. Each of the dinitro compounds could be reduced chemically or catalytically to produce the diamines 1,2-bis(4-aminophenoxy)ethane, bis(2-(4-amino-phenoxy)ethyl ether, 1,2-bis(2-(4-aminophenoxy)ethoxy)ethane, and bis(2-(2-(4-aminophenoxy)ethoxy)ethyl) ether. Polymerization of the diamines was carried out in m-cresol with toluene as an azeotroping agent. Polymides derived from 5,5′-[2,2,2-trifluoro-1-(trifluoromethyl)ethylidene]bis-1,3-isobenzofuradione exhibited good solubility in chlorinated solvents, glass transition temperatures as low as 140°C, as evidenced by viscous flow, and good thermal stability; a 5% weight loss generally occured at greater than 450°C. Isothermal aging studies conducted at 600°F(315°C) for 200 h indicated that weight loss is directly related to oxyalkylene chain length–10% for the shortest and 50% for the longest chain.     

Heat-resistant polymers containing bipyridyl units. I. Polyimides

Polyimides containing bipyridyl units were synthesized. The bipyridyl units were successfully incorporated by polymerization of various bipyridyl diamines with aromatic tetracarboxylic acid dianhydrides. The resulting polyamic acids had inherent viscosities in the range 0.07 to 2.26, and they were converted to the polyimides by thermal cyclization. The polyimides containing the bipyridyl units exhibited varying degrees of solubility in dimethylacetamide and m-cresol and were found to be very soluble in dichloroacetic acid.     

Polyimides derived from novel asymmetric ether diamine

A new aromatic asymmetrical ether diamine, 5‐(4‐aminophenoxy)‐1‐naphthylamine, was synthesized through the nucleophilic displacement of 4‐chloronitrobenzene with the potassium phenolate of 5‐amino‐1‐naphthol in dimethylformamide, followed by hydrazine palladium‐catalyzed reduction. A series of novel aromatic polyimides containing asymmetrical diaryl ether segments were prepared from the diamine with various aromatic dianhydrides via a conventional two‐step thermal or chemical imidization method. The poly(amic acid) precursors had inherent viscosities of 1.21–1.99 dL/g, and all of them could be cast and thermally converted into transparent, flexible, and tough polyimide films. The polyimides derived from less stiff dianhydrides generally displayed higher solubility. The glass‐transition temperatures of these polyimides were recorded between 307 and 336 °C by differential scanning calorimetry, and the softening temperatures of the polymer films were 299–344 °C according to thermomechanical analysis. The polyimides showed insignificant decomposition before 520 °C in air or nitrogen. For a comparative study, two series of analogous polyimides based on symmetrical diamines such as 1,5‐diaminonaphthalene and 1,5‐bis(4‐aminophenoxy)naphthalene were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 331–341, 2005     

Polyimides containing nonaromatic nitrogen linkages

Two diamines, 2,5-bis (4-aminophenyl)-2,5-diazahexane and 1,4-bis (4-aminophenyl)-1,4-diazacyclohexane were chosen as components for polyimidizations because they have melting points that differ by nearly 200°C (66–67 and 229–230°C, respectively) and are relatives of p-nitro-N,N-dimethylaniline. The melting points of the model compounds (phthalic anhydride) do not differ by as much as those of the free amines [303–304 and 386°C (DSC), respectively]. Six polyimides were prepared by a two-step polycondensation of the diamines with pyromellitic dianhydride, benzophenonetetracarboxylic dianhydride, and 5,5'-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene] bis-1,3-isobenzofurandione. DSC thermograms failed to indicate any distinct transitions up to 450°C, however, the polyimide prepared from 2,5-bis (4-aminophenyl)-2,5-diazahexane and pyromellitic dianhydride shows a slight break in its DSC curve at 233°C.     

Synthesis of photoreactive poly(ether ether ketone)s containing alkyl groups

Poly(ether ether ketone)s containing alkyl groups were prepared by nucleophilic substitution reaction of alkyl-substituted difluoro diaryl ethers with hydroquinone or by electrophilic substitution reaction of alkyl-substituted diaryl ether with 4,4′-oxydibenzoic acid in PPMA. Polycondensations proceeded smoothly and produced polymers having inherent viscosities up to 0.5-–1.6 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, and chloroform at room temperature. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight loses of the polymers were observed in the range above 450°C in nitrogen atmosphere. The glass transition temperatures of the polymers ranged from 128 to 146°C. Furthermore, Polymer 3b functioned as a photosensitive resist of negative type for UV radiation. The resist had a sensitivity of 42 mJ/cm² and a contrast of 2.5, when it was postbaked at 100°C for 10 min, followed by development with THF/acetone at room temperature. © 1996 John Wiley & Sons, Inc.     

Anionic polymerization initiators containing protected functional groups. II

An organolithium reagent substituted with a primary amine-protecting group [i.e.,? N(TMS)₂] has been prepared and used to polymerize 1,3-butadiene and isoprene. A method is described for converting the resulting? N(TMS)₂-containing polydienes into? NH₂-containing polymers. Both ? N(TMS)₂- and ? NH₂-terminated polydienes have been characterized with regard to microstructure, M _n, and M _w/M _n data, as well as qualitative and quantitative end-group analyses. The described preparative procedures represent a convenient route to the elusive primary amine-terminated polydienes.     

Heat-resistant polymers containing thianthrene analogs units. I. Polyimides

Polyimides that contained thianthrene and dibenzo-p-dioxins units were synthesized. The tricyclic fused rings were successfully incorporated by polymerizing the diamines of the units with aromatic tetracarboxylic dianhydrides. The resulting polyamic acids were converted to polyimides by thermal cyclodehydration. The influence of the tricyclic units on the properties of the polyimides has been investigated. Polyimides that contained dibenzo-p-dioxins (ODP) exhibited sufficient thermal stability but were insoluble even in concentrated sulfuric acid. The introduction of a methyl group did not produce an appreciable increase in solubility. Thianthrene polyimides were considerably less stable than the equivalent polymers derived from open-chain diamine, 4,4′-diaminodiphenyl sulfide but were partly soluble in acid solvents. The results are discussed in terms of packing the polymer molecules.     

Photochromic LC copolymers containing azobenzene and crown‐ether groups

An approach for the creation of a novel family of multifunctional crown‐ether‐containing comb‐shaped copolyacrylates consisting of chromophoric (azobenzene), ionophoric (crown‐ether), and mesogenic groups in the same macromolecule was developed. Phase behavior of the copolymers was studied, and correlation between their molecular structure and thermal properties was established. The increase of crown‐ether‐containing groups' concentration up to 26 mol % leads to disruption of nematic order and formation of amorphous phase. Influence of copolymers complexation with potassium perchlorate on mesomorphic properties of such systems was investigated. It was shown that complexation leads to decrease in mesophase thermostability due to the significant reducing of the side group anisometry by perchlorate counter ion. The comparative investigations of photooptical properties and photoorientation processes of copolymers and their complexes were also performed. An essential difference in kinetics of photooptical behavior was revealed; the bulky crown‐ether substituents decrease rotational mobility and prevent photoorientation process of azobenzene fragments diminishing photoinduced orientation and order parameter. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6532–6541, 2008     

Ruthenium(II) carbonyl complexes containing tetradentate Schiffbases

Ruthenium(II) carbonyl complexes of general formula [Ru(CO)(B)(L)] [where B = PPh3, pyridine (py), piperidine (pip); L = the dianionic tetradentate Schiff bases derived from the condensation of acetylacetone or benzoylacetone with ethylenediamine, propylenediamine or trimethylenediamine] have been synthesised by reacting [RuHCl(CO)(PPh3)2(B)] (B = PPh3, py or pip) with bis(acetylacetone)ethylenediimine, bis(acetylacetone)propylenediimine, bis(acetylacetone)trimethylenedi- imine, bis(benzoylacetone)ethylenediimine, bis(benzoylacetone)propylenediimine or bis(benzoylacetone)trimethylenediimine. The complexes were characterised onthe basis of elemental analyses, i.r., electronic and 1H- and 31P{1H}-n.m.r. spectral studies. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis of photoreactive calixarene derivatives containing pendant cyclic ether groups

New photoreactive calixarene derivatives containing cationically polymerizable pendant oxetane groups (calixarenes 1a , b , 2a , b , and 3a , b ) were synthesized in good yields by the substitution reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with (3‐methyloxetan‐3‐yl)methyl 4‐toluenesulfonate and (3‐ethyloxetan‐3‐yl)methyl 4‐toluenesulfonate with potassium hydroxide as a base and tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrrolidone, respectively. Calixarene derivatives containing cationically polymerizable pendant oxirane groups (calixarenes 4 , 5 , and 6 ) were also prepared in good yields by the substitution reaction of CRA, MCA, and BCA with epibromohydrin, respectively, with cesium carbonate as a base in N‐methyl‐2‐pyrrolidone. The thermal stability of the obtained calixarene derivatives containing pendant oxetane groups or oxirane groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had thermal stability beyond 340 °C. The photochemical reaction of calixarenes 1 , 2 , and 3 containing pendant oxetane groups was examined with certain photoacid generators in the film state. In this reaction system, calixarene 1a , composed of a CRA structure and pendant (3‐methyloxetan‐3‐yl)methyl groups, showed the highest photochemical reactivity when bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) was used as the catalyst. The photochemical reaction of calixarenes 4 , 5 , and 6 containing pendant oxirane groups was also examined, and it was found that the photoinitiated cationic polymerization of calixarenes 4 , 5 , and 6 proceeded smoothly under the same conditions; however, the reaction rates were lower than those of the corresponding calixarenes 1 , 2 , and 3 containing pendant oxetane groups. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1169–1179, 2001