New Chromium on Silica Gel Catalysts with very high activity for the polymerization of ethylene

Together with the known chromium (II)/silica gel catalyst (Phillips catalyst) for the polymerization of ethylene, two new ones have been investigated. It was found that a chromium(II)-“repoly” catalyst (prepared by short reaction of the chromium(II)/silica gel with ethylene at temperatures between 100 and 225°C) and a chromium(III)/silica gel catalyst have up to hundred times higher activity than the chromium(II) one. Activation energies were calculated as 54.6, 49.6 and 43.8 kJ per mol, respectively. The number of active sites was determined by measuring the integrated absorbance of the C? H and C?O stretching vibrations of the polymer. At low chromium concentration (0.056%) roughly 50% of all chromium was catalytically active in the case of chromium(II) and chromium(III) on silica gel. For the chromium(II)-“repoly” catalyst all chromium atoms can be active. The turnover numbers for the polymerization at 20°C were calculated as 0.1 (chromium(II)), 7.5 (chromium(II)-“repoly”) and 20 (sec^?1 atm^?1) (chromium(III)).     

Microanalysis with the aid of ion-exchange resins : Detection of nanogram amounts of iron(iii) with ferron

A new ultramicro method for detection of iron(III) is described. A colourless, strongly basic anion-exchangc resin of low cross-linkage in the chloride form is used to enhance the sensitivity of the colour reaction of iron(III) with ferron. The limit of identification of the new “qiresin spot test” is 4 ng of iron(III) (1 : 1·10⁷) after 10 to 20 min and 2 ng (l :2·107) after 50 min. The test is 50–100 times as sensitive as the usual spot test. Serious interferences were observed with cobalt(II), copper(II), chromiuin(VI), uranium(VI) and vanadium (V) ; the elimination of their interferences was also studied.     

Determination of metals at trace levels via pre-column derivatization and nonpolar stationary-phase high-performance liquid chromatography with n-butyl-2-naphthylmethyldithiocarbamate complexes

A new, very stable dithiocarbamate, bis(n-butyl-2-naphthylmethyldithiocarbamate) zinc(II), has been synthesized and its use in trace metal determination by high-performance liquid chromatography (h.p.l.c.) has been investigated. Metal complexes of this ligand are thermodynamically stable and kinetically inert at the 1 × 10^-8 M level. Various metal complexes including nickel(II), iron(III), copper(II), mercury(II), and cobalt(II) have been “baseline” separated by nonpolar stationary-phase h.p.l.c. The detection limits are about 1–2 ng with a variable-wavelength absorbance detector.     

Enhanced degradation of organic contaminants by Fe(III)/peroxymonosulfate process with l-cysteine

The difficulty in Fe(III)/Fe(II) conversion in the Fe(III)/peroxymonosulfate (PMS) process limits its efficiency and application. Herein, l-cysteine (Cys), a green natural organic ligand with reducing capability, was innovatively introduced into Fe(III)/PMS to construct an excellent Cys/Fe(III)/PMS process. The Cys/Fe(III)/PMS process, at room temperature, can degrade a variety of organic contaminants, including dyes, phenolic compounds, and pharmaceuticals. In subsequent experiments with acid orange 7 (AO7), the AO7 degradation efficiency followed pseudo-first-order kinetic which exhibited an initial “fast stage” and a second “slow stage”. The rate constant values ranged depending on the initial Cys, Fe(III), PMS, and AO7 concentrations, reaction temperature, and pH values. In addition, the presence of Cl^?, NO₃^?, and SO₄^2? had negligible impact while HCO₃^? and humic acid inhibited the degradation of AO7. Furthermore, radical scavenger experiments and methyl phenyl sulfoxide (PMSO) transformation assay indicated that sulfate radical, hydroxyl radical, and ferryl ion (Fe(IV)) were the dominant reactive species involved in the Cys/Fe(III)/PMS process. Finally, based on the results of gas chromatography-mass spectrometry, several AO7 degradation pathways, including N=N cleavage, hydroxylation, and ring opening were proposed. This study provided a new insight to improve the efficiency of Fe(III)/PMS process by accelerating Fe(III)/Fe(II) cycle with Cys.     

Intramolecular single and double proton transfer in benzoxazole derivatives

The “double” derivatives of benzoxazole, bis-2,5-(2-benzoxazolyl)hydroquinone (II) and bis-3,6-(2-benzoxazolyl)-pyrocatochol (III), have been investigated. In (II), only one proton is transferred in the S₁ state. Primary and tautomeric forms exist in a rapidly established equilibrium. In (III), two tautomers were detected. One is generated in the S₁ state by a double proton transfer without a potential barrier, while the other, generated by a single proton transfer, is already present in trace amounts in the S₀ state.     

Synthesis of “capped porphyrins”

The synthesis of “capped porphyrins” ($\text{10}$), ($\text{18}$), and ($\text{28}$), and their (chloro)iron(III), iron(II), cobalt (II), and zinc(II) complexes is reported. These complexes serve as models for the active site of the oxygen binding haemoproteins. In addition to reversible binding of dioxygen by each of the iron (II) porphyrin complexes, the 1-methyl-imidazole-(“C₃-capped porphyrin”) iron (II) complex ($\text{23}$) reacts reversibly with carbon monoxide, in solution at 25°C.     

103Rh and 33s hyperfine interactions in tetraphenylarsonium-bis ( maleonitriledithiolato ) rhodate (II), (Ph4As)2[Rh(mnt)2]: a single-crystal EPR-ENDOR study

The complete ¹⁰³Rh and ³³S hyperfine coupling tensors of the 4d⁷ low-spin chelate tetraphenylarsoniumbis (maleonitriledithiolato)rhodate(II) doped into the corresponding nickel complex salt have been measured by EPR-ENDOR spectroscopy. Both interactions are small and confirm that the unpaired electron is in an “out-of-plane” π-type molecular orbital. The Rh-S bonds are less covalent than bonds in the isoelectronic Pd(III) complex.     

Synthesis of artificial receptors as potential candidates for recognition and binding of pterin analogs

Open chain podands 2a-c and macrocycles 2d-e have been synthesized as potential candidates for 4-aminopterin recognition and binding, featuring H? bonding characteristics and “stacking interaction” 2e. Preliminary binding studies between 6, 7 , and 8 (simpler analogs of the above 2a-e ) as “bosts” and appropriate “guests”, showed that carbamates 2a and 2e are the most promising receptors for 4-aminopterin binding.     

Preparation and properties of a new chelating resin containing 2-nitroso-1-naphthol

A new chelating ion-exchange resin based on a macroreticular polystyrene—divinyl benzene copolymer and containing 2-nitroso-1-naphthol as the functional species has been synthesized. It is highly stable in acidic and alkaline solutions. Its sorption characteristics for V(V), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Hg(II), Pd(II) and U(VI) have been investigated over the pH range 1.0–7.0 and the exchange-capacities have been found to be generally higher than those of a similar resin containing 1-nitroso-2-naphthol.     

Syntheses,characterization and x-ray crystal structures of copper(II) and nickel(II) complexes of tridentate monocondensed diamines

The syntheses and characterization of three compounds involving tridentate “half-units” 7-amino-4-methyl-5-aza-3-hepten-2-one (HAMAH) and 8-amino-4-methyl-5-aza-3-octen-2-one (HAMAO) are described. Cu(II) and Ni(II) complexes with HAMAH have been isolated as four-coordinate complexes, the fourth coordination site being taken by imidazole, and have been structurally characterized. A Cu(II) complex involving HAMAO has been isolated as a highly insoluble polymeric species. Hydroxo bridging between the metal centres is indicated.     

The Oxidation of Aliphatic Hydrocarbons in the Presence of Higher Oxidation States of Silver

Abstract

The compound silver “peroxide”? has been known for some time and its preparation is described in the literature.¹ The structure of this compound has been in dispute; however it appears to have been resolved using neutron diffraction techniques. Scatturin, Bellon and Salkind² have shown that silver “peroxide” is a rather complex material in which silver is present in two different oxidation states, namely Ag(I) and Ag(III). In the crystal, Ag(III) atoms are coordinated to oxygen in a square planar array and the Ag(I) atoms are linearly coordinated. There are no peroxide oxygens. Hence the formula for silver “peroxide” is more properly written Ag(I)Ag(III)02.     

The Chemical Constituents of Polypodium Niponicum

Three new steroids named as shuilongguine I ( 1 ), shuilongguine II ( 2 ) and shuilongguine III ( 3 ), together with eleven known compounds were isolated from Polypodium niponicum (Chinese name “Shuilonggu”, Berberidaceae). Their structures were deduced by spectroscopic methods and 2D NMR experiments.     

Complexation and Thermal Studies of Uric Acid with Some Divalent and Trivalent Metal Ions of Biological Interest in the Solid State

Nine new [metal uric acid] complexes [M(Ua) n ]°·XH 2 O have been synthesized. These complexes have been characterized by elemental analysis, X-ray diffraction (XRD), magnetic susceptibility ( w eff. ), FTIR spectra, thermal analysis (TG & DTA), and electronic spectra (UV/visible). Uric acid (HUa) coordinates as a bidentate ligand to Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Al(III), Cr(III) and Fe(III) through the protonated N-7 within the imidazole ring and O-6 within the pyrimidine ring. Uric acid forms neutral metal urate complexes with all the above metal ions. The quantitative compositions were determined as [M(Ua) 2 ·(H 2 O) 2 ]°·XH 2 O where M(II)=Mn, Fe, Co, Ni, Cu, Zn and X=2, 4, 2, 4, 2, 2, respectively. The M(II) complexes exhibit an isostructural octahedral coordination with N-7, O-6 of two uric acid ligand molecules, and O of two water molecules. Compositions were also determined as [M(Ua) 3 ]°·YH 2 O where M(III)=Al, Cr, Fe and Y=6, 3, 3 respectively. All the M(III) complexes form an isostructural octahedral coordination with N-7 and O-6 of three uric acid ligand molecules. Iron(III) complexes prepared with N 1 , N 3 and N 9 -methyl uric acid yielded brown complexes with a metal ligand ratio of 1 3, while N 7 -methyl uric acid did not yield a complex due to blockage of N-7 with a methyl group.     

Block Copolymerization of Lactide and an Epoxide Facilitated by a Redox Switchable Iron‐Based Catalyst

A cationic iron(III) complex was active for the polymerization of various epoxides, whereas the analogous neutral iron(II) complex was inactive. Cyclohexene oxide polymerization could be “switched off” upon in situ reduction of the iron(III) catalyst and “switched on” upon in situ oxidation, which is orthogonal to what was observed previously for lactide polymerization. Conducting copolymerization reactions in the presence of both monomers resulted in block copolymers whose identity can be controlled by the oxidation state of the catalyst: selective lactide polymerization was observed in the iron(II) oxidation state and selective epoxide polymerization was observed in the iron(III) oxidation state. Evidence for the formation of block copolymers was obtained from solubility differences, GPC, and DOSY‐NMR studies.     

Mangan(IV)-Komplexe mit dreizähnigen diaciden Liganden. Kristallstruktur von Acetylacetonato-salicylaldehydbenzoylhydrazonato(2−)-methanol-mangan(III)

Manganese(IV) Complexes with Tridentate Diacidic Ligands. Crystal Structure of Acetyl-acetonato-salicylaldehydebenzoylhydrazonato(2?)-methanol-manganese(III) The manganese(IV) chelates of salicylaldehyde benzoylhydrazone and salicylaldehyde salicylhydrazone were synthesized by ligand exchange reactions using bis(acetylacetonato)manganese(II), tris(acetylacetonato)manganese(III) as well as manganese(III) acetate. The brown complexes show the expected molecular ions in the APCI mass spectra. As an intermediate compound acetyacetonato-salicylaldehydebenzoylhydrazonato(2?)-methanol-manganese(III) was isolated and characterized by X-ray structural analysis. Crystallographic data see “Inhaltsübersicht”.     

Simple Conjugated Polymers with On‐Chain Phosphorescent Iridium(III) Complexes: Toward Ratiometric Chemodosimeters for Detecting Trace Amounts of Mercury(II)

For the development of excellent optical probes for mercury(II), a series of simple conjugated polymers that contain phosphorescent iridium(III) complexes as receptors for mercury(II) were designed and synthesized. These conjugated polymers showed energy transfer from the polymer host to iridium(III) complex guest in both solution and the solid state. Unexpectedly, they can work as excellent polymer chemodosimeters for mercury(II) by utilizing the mercury(II)‐induced decomposition of iridium(III) complex. They exhibit a pronounced optical signal change with switchable phosphorescence and fluorescence, even when the concentration of a solution of mercury(II) in THF was as low as 0.5 ppb. With the addition of mercury(II), the phosphorescent emission intensity of iridium(III) complexes was quenched completely. As the emission from polymer backbones increased, the emission wavelength was redshifted simultaneously, thereby realizing ratiometric detection. Excellent selectivity toward mercury(II) over other potentially interfering cations was also realized. In addition, an obvious emission color change of polymer solution from red to yellow‐green was observed, thus realizing a “naked‐eye” detection of mercury(II). More importantly, the solid films of these polymer chemodosimeters also exhibited high sensitivity and rapid response to mercury(II), thereby demonstrating the possibility of the fabrication of sensing devices with fast and convenient detection of mercury(II). The sensing mechanism was also investigated in detail. This is the first report on chemodosimeters based on conjugated polymers with phosphorescent iridium(III) complexes.     

A spectrophotometric and polarographic investigation of three new cyclohexene-substituted benzodiazepines

Three recently introduced benzodiazepine derivatives, tetrazepam (I), nortetrazepam (II) and menitrazepam (III) have been subjected to spectral and polarographic investigation. From the ultraviolet spectral data their pK(a)-values have been determined: 4.28 (I), 4.3 (II) and 3.5 (III). From the polarographic measurements it can be concluded that in I and II the 4,5 CN double bond is reduced with 2 electrons. For the first time for the benzodiazepine series it has been observed that in slightly alkaline solutions this process takes place in two separate 1-electron steps. In III, first the aromatic nitro group is reduced to a hydroxylamine group, then at more negative potentials the CN double bond is also reduced; its reduction wave mostly coalesces with that for the 6-electron reduction of the nitro group to an amino group. A differential pulse polarographic method is presented, for the determination of I, II, III at concentrations as low as 10(-7)M.     

Synthesis and properties of new chelating resin with a spacer containing alpha-nitroso-beta-naphthol as the functional group

A new chelating ion-exchange resin with a spacer CH₂-NH-C₆H₄- based on a microreticular chloromethylated styrene-divinylbenzene copolymer containing α-nitroso-β-naphthol as a functional group has been synthesized. The sorption characteristics for manganese(II), iron(III), cobalt(II), nickel(II), copper(II), and zinc(II) have been investigated over the pH range 1.0–7.0. The resin is highly stable in acidic and alkaline medium. Iron(III) and cobalt(II); copper(II) and iron(III) are separated very effectively in a column operation by stepwise elution.     

Cr(Ⅱ)与过氧化莰烷酮酰体系引发的活性自由基聚合反应研究

合成了过氧化茨烷酮酰 (KPO) ,用它和Cr(Ac) 2 组成的氧化还原体系经陈化后 ,引发甲基丙烯酸甲酯 ,甲基丙烯酸 β 羟乙酯和丙烯酸进行了聚合反应 .其中甲基丙烯酸甲酯具有活性聚合特征 .并有效引发含羟基单体如甲基丙烯酸 β羟乙酯和丙烯酸进行聚合 .实验表明 ,引发剂利用效率随陈化温度的升高而降低 .     

Acyclic Diterpene‐γ‐Lactones and Flavonoid from Salix Cheilophila Omitted

Three new phytane‐type diterpene‐γ‐lactone shaliuin I (2) , shaliuin II (3) and shaliuin III (4) were isolated along with thirteen known compounds from twigs of Salix cheilophila omitted (Chinese name “Shaliu”, Salicaceae). The structures of three new compounds have been established on the basis of spectroscopic methods and 2D NMR techniques.