Syntheses of poly[N-(1-pyrenyl)acetyl ethylenimine] [pyrene-substituted linear poly(ethylenimine)] and poly[methyl 2-(1-pyrenyl)acetamidopropenoate] [pyrene-substituted poly(dehydroalanine methyl ester)]

The syntheses of two new pyrene-containing monomers—2-(1-pyrenyl)methyl-2-oxazoline ( 6 ) and methyl 2-(1-pyrenyl)acetamidopropenoate ( 12 )—and their polymerization are described. Cationic isomerization polymerization of 6 with ethylene glycol ditosylate initiator gave poly[N-(1-pyrenyl)acetyl ethylenimine] ( 7 ) and free-radical polymerization of 12 with AIBN initiator gave poly[methyl 2-(1-pyrenyl)acetamidopropenoate] ( 15 ). The monomer model compounds of the two polymers, namely, N,N-diethyl(1-pyrenyl)acetamide ( 9 ) and methyl 2-methyl-2-(1-pyrenyl)acetamidopropanoate ( 14 ), were also synthesized. The polymers were characterized by elemental analysis, IR spectroscopy, and a comparison of their ¹H-NMR spectra with those of the respective monomer model compounds.     

5-(N-2-羟乙基)羟乙酰氨基-N,N′-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺的合成

5-氨基-N,N′-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(2)在N,N-二甲基乙酰胺中可直接与乙酰氧基乙酰氯反应,产物再经碱性水解得5-羟乙酰氨基-N,N′-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(3),后者再与氯乙醇反应生成5-(N-2-羟乙基)羟乙酰胺基-N,N′-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(1),经乙二醇甲醚/正丁醇重结晶,纯度高于99%(HPLC),反应总收率由39.3%(文献值)提高到55.1%.     

5-(N-2-羟乙基)羟乙酰氨基-N,N'-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺的合成

5-氨基-N,N'-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(2)在N,N-二甲基乙酰胺中可直接与乙酰氧基乙酰氯反应,产物再经碱性水解得5-羟乙酰氨基-N,N'-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(3),后者再与氯乙醇反应生成5-(N-2-羟乙基)羟乙酰胺基-N,N'-双(2,3-二羟丙基)-2,4,6-三碘-1,3-苯二甲酰胺(1),经乙二醇甲醚/正丁醇重结晶,纯度高于99%(HPLC),反应总收率由39.3%(文献值)提高到55.1%.     

10-[N-(Dialkylphosphono and thiophosphono)glycyl]phenothiazines

Conclusions Eight new 10-[N-(dialkylphosphono and thiophosphono)glycyl]phenothiazines have been synthesized.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 170–171, January, 1969.     

Synthesis and characterization of poly[4-(4-hydroxyphenoxy) benzoic acid]

Poly[4-(4-hydroxyphenoxy) benzoic acid] was prepared by the bulk polycondensation of 4-(4-acetoxyphenoxy) benzoic acid. Polycondensation was conducted at 350°C for 3 h under a reduced pressure of 0.1 mmHg and gave a polymer with X?n of 255. The polymer was characterized by elemental analysis, IR spectroscopy, differential scanning calorimetry, and wide-angle X-ray measurement. The crystal/nematic and nematic/isotropic phase transition temperatures of polymer, which depend on the molecular weight, were observed at about 300°C and 410°C, respectively. The polymers with low molecular weights showed nematic textures above 300°C. This nematic/isotropic phase transition temperature is lower than that of poly (4-hydroxybenzoic acid). This thermal behavior of polymer comes from ether units, which increase the flexibility (the rotation or torsion of skeletal bonds) of the polymer chain. © 1994 John Wiley & Sons, Inc.     

Carbazole substituted N-acylated linear polyethylenimines (PEI). synthesis and characterization of poly[N-(9-carbazolyl)acetylethylenimine] and poly[N-(2-(9-carbazolyl))propanoylethylenimine]

The synthesis of carbazola substituted N-acylated polyethylenimines, namely, poly[N-(9-carbazolyl)acetylethylenimine] 20 and poly[N-(2-(9-carbazolyl))propanoylethylenimine] 21 by a grafting reaction onto PEI and isomerization polymerization of the carbazole substituted 2-oxazolines is reported. A complete acylation of amino groups in PEI by the 9-carbazolylacetyl groups was achieved by the p-nitrophenyl active ester method but PEI was only partially N-acylated by the 2-(9-carbazolyl)propanoyl groups under similar reaction conditions. The carbazole substituted 2-oxazolines, namely, 2-(9-carbazolyl)methyl-2-oxazoline 18 and (R,S)-2-[1-(9-carbazolyl)]ethyl-2-oxazoline 19 , were prepared by a base induced cyclization of ß-chloroamides. The ring-opening isomerization polymerization of 18 and 19 in the molten state with a cationic initiator (dimethyl sulfate, methyl triflate, or ethylene glycol ditosylate) gave 20 and 21. Gel permeation chromatography of 20 and 21 obtained with different monomerto-initiator ratios gave evidence of a chain transfer reaction with the monomer. The polymers were characterized by elemental analyses, IR, and ¹H-NMR spectroscopy.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

N-[4-(三氟甲氧基)苯基]氨基甲酸苯酯的合成

以三氟甲氧基苯为起始原料,经硝化、加氢还原和酰化反应合成了N-[4-(三氟甲氧基)苯基]氨基甲酸苯酯,总收率84.6%,纯度98.9%,其结构经¹H NMR和MS（ESI）确证。     

Synthesis and characterization of poly[2,5-bis(triethoxy)-1,4-phenylene vinylene]

The synthesis of a highly soluble, 2,5-disubstituted poly(p-phenylene vinylene) with pendant side chains containing ether groups was accomplished by a dehydrochlorination route. Specific interactions of the oxygen-containing side chains with the solvent are presumably responsible for the high solubility of the polymer, especially in protogenic solvents. The polymer microstructure was characterized by ¹H- and ¹³C-NMR. The polymer showed solvatochromic properties when dissolved in a variety of solvents. The relatively high molecular weight (M_n = 17,000) permitted the fabrication of free-standing films. The electrical conductivity of iodine-doped films was approximately 2 × 10^–2 S cm^–1. © 1995 John Wiley & Sons, Inc.     

14个N-取代苯基-N'-[6-(2-取代苯并噻唑)基]脲类化合物的 合成与结构表征

为了寻找新的高活性植物调节品种,以苯并噻唑,2-甲基苯并噻唑和取代苯胺为原料合成了7个N-取代苯基-N'(6-苯并噻唑基)脲和7个N-取代苯基一N'-[6-(2-甲基苯并噻唑)基]脲类新化合物,其产率分别为74.0%、76.0%、85.0%、82.0%、70.0%、73.0%、72.0%、82.0%、88.5%、87.0%、90.5%、91.0%、83.5%和85.0%。14个脲类化合物结构经元素分析、IR和1HNMR表征。各化合物的植物细胞分裂性被初步测定。     

2'-O-[2-[N,N-(dialkyl)aminooxy]ethyl]-modified antisense oligonucleotides

[structure] Oligonucleotides with two novel modifications, 2'-O-?2-[N, N-(dimethyl)aminooxy]ethyl? (2'-O-DMAOE) and 2'-O-?2-[N, N-(diethyl)aminooxy]ethyl? (2'-O-DEAOE), have been synthesized. These modifications exhibit high binding affinity to target RNA (and not to DNA) and enhance the nuclease stability of oligonucleotides considerably with t(1/2) > 24 h as a phosphodiester.     

Synthesis of N-[4-(2-naphthyl)]- and N-[4-(2-thienyl)methylaminobenzoyl]-dl-glutamic acids

N-[4-(2-Naphthyl)]-(IIa) and N-[4-(2-thienyl)methylaminobenzoyl]-dl-glutamic acids (IIb) have been synthesized for biological tests by the reaction of the corresponding halogen derivatives with diethyl p-aminobenzoyl-dl-glutamate (III) with subsequent hydrolysis of the esters obtained.     

Synthesis and characterization of 6-alkylcarbamato-2, 10-dichlorodibenzo [d,g] [1,3,6,2]dioxathiaphosphocin 6-oxides

Novel 6-alkylcarbamato/thiocarbamato-2,10-dichlorodibenzo [d,g][1,3,6,2]dioxathiaphosphocin 6-oxides were synthesized by cyclization of 5,5′-dichloro-2,2′-dihydroxydiphenyl sulfide with the corresponding dichlorophosphinyl carbamates/thiocarbamates that were obtained by the addition of alcohols/thiols to dichloroisocyanatophosphine oxide and were characterized by IR, ¹H, ¹³C, ³¹P NMR, and mass spectral studies. A ¹³C NMR analysis revealed ²J_POC and ³J_POCC couplings. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of poly[phenyl(fluoroalkyloxaalkane)silanediyl]s

Monomeric fluoroalkoxyalkyl(phenyl)dichlorosilanes were synthesized with quantitative yields by hydrosilylation of allyl ethers of fluoroalcohols with phenyldichlorosilane with Pt(Ph₃Sb)₂Cl₂ complex as a catalyst. Starting from these monomers, corresponding polysilanes with weight‐average molecular weights of 2–3 × 10⁴ were obtained by the Wurtz reaction. Increasing the CF₂ groups containing two to six monomer units caused the char yields to increase from 3 to 48% at 800 °C in air. The emission characteristics of these polysilanes in a chloroform solution were examined. They had a narrow peak at 344 nm with a small Stokes shift (≈20 nm). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3761–3767, 2003     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.     

Thermal Behavior of N,N''''-Bis[N-(2,2,2-trinitroethyl)- N-nitro]ethylenediamine

Introduction N,N'-Bis[N-(2,2,2-trinitroethyl)-N-nitro]ethyenedi- amine (BTNEDA) is a typical nitramine compound, which is structurally shown in Figure 1. The crystal density is 1.87 gcm-3. The detonation velocity corresponding to r=1.842 gcm-3 is about 8970 ms-1.1 Therefore, BTNEDA is used as high explosive. Its thermogram has been reported.2 In this paper, its kinetic parameters of the exothermic decomposition reaction are described. This is quite useful in the evaluation of its ther…     

Synthesis of N-[2-(1-piperidinyl)ethyl]benzamides

Novel benzamide derivatives, N-[1-(aminocarbonyl)-2-(1-piperidinyl)ethyl]benzamides (4 and 5), were prepared from the reaction of beta-piperidinoalanine (6) as the starting material.     

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene)

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene) is studied in inert and oxidative environments by using thermogravimetric analysis, pyrolysis GC/MS, pyrolysis GC/FT-IR, and variable temperature-diffuse reflectance infrared spectroscopy (VT-DRIFTS). Thermal degradation in helium begins by depolymerization yielding a volatile product capable of abstracting hydrogens from the polymer residue. Multiple hydrogen abstractions result in a variety of volatile species containing benzyl-benzyl bonds. In the presence of oxygen, polymer decomposition is dictated by reactions of peroxy and hydroperoxy radicals. At low temperatures, oxygenated species are the primary products. At higher temperatures, increased unsaturation is detected in the polymer residue. In both inert and oxidative environments, the strain associated with alignment of paracyclophane aromatic rings is lost during the initial stages of thermal degradation. © 1992 John Wiley & Sons, Inc.