Syntheses of poly[N-(1-pyrenyl)acetyl ethylenimine] [pyrene-substituted linear poly(ethylenimine)] and poly[methyl 2-(1-pyrenyl)acetamidopropenoate] [pyrene-substituted poly(dehydroalanine methyl ester)]

The syntheses of two new pyrene-containing monomers—2-(1-pyrenyl)methyl-2-oxazoline ( 6 ) and methyl 2-(1-pyrenyl)acetamidopropenoate ( 12 )—and their polymerization are described. Cationic isomerization polymerization of 6 with ethylene glycol ditosylate initiator gave poly[N-(1-pyrenyl)acetyl ethylenimine] ( 7 ) and free-radical polymerization of 12 with AIBN initiator gave poly[methyl 2-(1-pyrenyl)acetamidopropenoate] ( 15 ). The monomer model compounds of the two polymers, namely, N,N-diethyl(1-pyrenyl)acetamide ( 9 ) and methyl 2-methyl-2-(1-pyrenyl)acetamidopropanoate ( 14 ), were also synthesized. The polymers were characterized by elemental analysis, IR spectroscopy, and a comparison of their ¹H-NMR spectra with those of the respective monomer model compounds.     

Polymerization of N-(fluoro phenyl) maleimides

Poly(N-aryl maleimide)s of characteristic structures have been synthesized and some of their physical properties studied. These include N-(2-fluoro phenyl), N-(3-fluoro phenyl), N-(4-fluoro phenyl), N-(2,4-difluoro phenyl), N-(2,5-difluoro phenyl), N-(2,3,5,6-tetrafluoro phenyl), and N-(pentafluoro phenyl). The polymerization of N-(fluoro phenyl) maleimides by free-radical initiation in bulk or in solution and by anionic catalyst have been studied to compare the characteristics of polymerization by γ-ray irradiation with that by free-radical initiation. The polymers were characterized by elemental analysis, intrinsic viscosity, spectroscopy (IR and NMR), programmed thermogravimetric analysis, and x-ray diffraction. Spectra of polymers prepared by radiation and anionic polymerization were nearly identical with those of polymers prepared by free-radical polymerization initiated by AIBN in bulk or in solution and by the self-initiated thermal polymerization. A variety of reaction conditions were tried, but all attempts to change the molecular structure of the polymers were unsuccessful. Rates of thermal degradation for poly[N-(fluoro phenyl) maleimide]s have been analyzed by using a multiple-heating-rate procedure. Overall activation energy, order of reaction, and frequency factor have been evaluated. On the basis of the comparison between the overall activation energy of the thermal degradation of poly[N-(fluoro phenyl) maleimide]s and NMR spectra of their corresponding monomers, it can be concluded that the ¹H shifts due to ethylenic protons are so characteristic in sign and magnitude as to be useful in thermal stability elucidation. Some qualitative explanations were given on the stability of these polymers as affected by the type and size of the substituent. The x-ray diffractograms of all samples show two rather broad peaks indicative of noncrystalline structures. The location of the peaks does not depend upon preparation conditions and temperature. Poly(N-maleimide)s of fluoroanilines have not been hitherto described.     

De-tert-butylation of poly(N-tert-butyl-N-n-propylacrylamide): Stereochemical analysis at the triad level

The stereochemical analysis of polymers derived from N,N-disubstituted acrylamides is usually difficult. The diad tacticity can be determined from the ¹H nuclear magnetic resonance (NMR) signals of the main-chain methylene groups. However, the splitting because of the configurational sequences is poor, even in ¹³C NMR, which does not allow determination of the tacticity at the triad level. In contrast, the stereochemical analysis of polymers derived from N-monosubstituted acrylamides is easily conducted and the triad tacticity can be determined from the ¹³C signals of the main-chain methine groups. Thus, stereochemical analysis of N,N-disubstituted polymers should be able to be conducted if the polymers are transformed into N-monosubstituted polymers with retention of the configurational sequence. Poly(N-tert-butyl-N-n-propylacrylamide) was radically prepared, and de-tert-butylation was conducted by treatment with scandium triflate in a mixed solvent of CH₃CN and 1,4-dioxane at 50, 80, and 110°C. ¹H NMR analysis of the resulting polymers indicated quantitative conversion after 72 hr, regardless of the temperature. ¹³C NMR analysis of the transformed polymers confirmed that the configurational sequences were retained during the reaction. Thus, the triad stereochemical analysis of N,N-disubstituted polymers was successfully conducted by de-tert-butylation as a polymer reaction, followed by ¹³C NMR analysis of the transformed polymers.     

Carbazole-substituted dehydroalanine main chain polymers. Synthesis and characterization of poly[methyl 2-(9-carbazolyl) acetylaminopropenoate] and poly[2-(9-carbazolyl) acetylaminopropenoic acid]

The preparation and radical-initiated polymerization of a carbazole-substituted N-acylated dehydroalanine, namely, 2-(9-carbazolyl)acetylaminopropenoic acid ( 7 ) and its methyl ester ( 6 ) is reported. The monomers 6 and 7 were prepared by dehydrochlorination of N-acylated β-chloroalanine derivatives. The monomer model compounds for the two polymers, namely, 2-(9-carbazolyl)acetylamino-2-methylpropanoic acid ( 11 ) and its methyl ester ( 10 ), were also prepared. The polymers and their monomer model compounds were characterized by elemental analysis, IR and ¹H-NMR spectra. The polymers 12 and 13 of different molecular weights could be obtained by changing the monomer-to-initiator ratios used in polymerization experiments.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Poly(methylene sebacate): Synthesis and characterization

The synthesis of poly(methylene sebacate) was carried out via the reaction of cesium sebacate with bromochloromethane in N-methylpyrrolidone over a range of temperatures (55–130°C). A number of polymers having limiting viscosity numbers in the range of 0.29–0.94 dL g^?1 (CHCl₃; 25°C) were characterized by elemental analyses, ¹H- and ¹³C-NMR, DSC, and GPC techniques. The polymerization was found to be very rapid at 100°C, being complete in ca. 15 min. and was relatively insensitive to the stoichiometric ratio of the monomers. As high molecular weight polymers were produced without the quantitative conversion of the reactants, the polymerization is considered to be occurring by an interfacial mechanism.     

A novel synthesis of semitelechelic functional poly(methacrylate)s through an alcoholate initiated polymerization. Synthesis of poly[2-(N,N-diethylaminoethyl) methacrylate] macromonomer

Potassium alcoholate was found to initiate the anionic polymerization of 2-(N,N-diethylaminoethyl) methacrylate (AMA) to form poly[2-(N,N-diethylaminoethyl) methacrylate] (PAMA). The molecular weight of the polymers was controlled by the monomer-initiator ratio with a narrow molecular weight distribution. Increased reactivity of the initiator by chelation of the monomer to the cation may be important for the polymerization. Using potassium (4-vinylbenzyl) alcoholate as an initiator, PAMA having a vinylbenzyl group was prepared which is a macromonomer having pH sensitive amino groups in each monomeric unit. By radical copolymerization with styrene, the PAMA macromonomer was incorporated as a graft chain.     

Influence of tertiary diamines on the synthesis of high‐molecular‐weight poly(1,3‐cyclohexadiene)

The living synthesis of poly(1,3‐cyclohexadiene) was performed with an initiator adduct that was synthesized from a 1:2 (mol/mol) mixture of N,N,N′,N′‐tetramethylethylenediamine (TMEDA) and n‐butyllithium. This initiator, which was preformed at 65 °C, facilitated the synthesis of high‐molecular‐weight poly(1,3‐cyclohexadiene) (number‐average molecular weight = 50,000 g/mol) with a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight = 1.12). A plot of the kinetic chain length versus the time indicated that termination was minimized and chain transfer to the monomer was eliminated when a preformed initiator adduct was used. Chain transfer was determined to occur when the initiator was generated in situ. The polymerization was highly sensitive to both the temperature and the choice of tertiary diamine. The use of the bulky tertiary diamines sparteine and dipiperidinoethane resulted in poor polymerization control and reduced polymerization rates (7.0 × 10⁻⁵ s⁻¹) in comparison with TMEDA‐mediated polymerizations (1.5 × 10⁻⁴ s⁻¹). A series of poly(1,3‐cyclohexadiene‐block‐isoprene) diblock copolymers were synthesized to determine the molar crossover efficiency of the polymerization. Polymerizations performed at 25 °C exhibited improved molar crossover efficiencies (93%) versus polymerizations performed at 40 °C (80%). The improved crossover efficiency was attributed to the reduction of termination events at reduced polymerization temperatures. The microstructure of these polymers was determined with ¹H NMR spectroscopy, and the relationship between the molecular weight and glass‐transition temperature at an infinite molecular weight was determined for polymers containing 70% 1,2‐addition (150 °C) and 80% 1,4‐addition (138 °C). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1216–1227, 2005     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

Synthesis and characterization of organic/inorganic hybrid star polymers of 2,2,3,4,4,4‐hexafluorobutyl methacrylate and octa(aminophenyl)silsesquioxane nano‐cage made via atom transfer radical polymerization

Well‐defined organic/inorganic hybrid fluorinated star polymers were synthesized via atom transfer radical polymerization (ATRP) of 2,2,3,4,4,4‐hexafluorobutyl methacrylate (HFBMA) using octa(aminophenyl)silsesquioxane (OAPS) nano‐cage as initiator. For this purpose, OAPS was transformed into ATRP initiator by reacting with 2‐bromoisobutyrylbromide. ATR polymerization of HFBMA was carried out in trifluorotoluene at 75 °C using CuCl/2,2‐bipyridine or N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst system. GPC and ¹H NMR data confirmed the synthesis of OAPS/PHFBMA hybrid star polymer. Kinetics of the ATR polymerization of HFBMA using OAPS nano‐cage initiator was also investigated. The OAPS/PHFBMA hybrid stars were found to be molecularly dispersed in solution (THF); however, TEM micrographs revealed the formation of spherical particles of ～ 120–180 nm by the OAPS/PHFBMA hybrid star polymer after solvent evaporation. Thermal characterization of the nanocomposites by differential scanning calorimetry (DSC) revealed a slightly higher glass transition temperature (T_g) (when compared with the linear PHFBMA) of higher molecular weight OAPS/PHFBMA hybrid star polymers. In contrast, lower T_g than the linear PHFBMA was observed for OAPS/PHFBMA of relatively lower molecular weight (but higher than the linear PHFBMA). Thermal gravimetric analysis (TGA) showed a significant retardation (by ～60 °C) in thermal decomposition of nanocomposites when compared with the linear PHFBMA. Additionally, surface properties were evaluated by measuring the contact angles of water on polymer surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7287–7298, 2008     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Synthesis of polypyrimidoquinazolinetetraones from N,N′-bis(mesyloxy)pyromellitimide and aromatic diamines

A novel class of polypyrimidoquinazolinetetraones was synthesized by the polymerization of N,N′-bis(mesyloxy)pyromellitimide with aromatic diamines in N-methyl-2-pyrrolidone in the presence of triethylamine as an acid acceptor. The polymerization proceeded probably through the formation of ring-opened adducts, followed by elimination and rearrangement yielding polyamide-isocyanates, which in turn were cyclized to give polypyrimidoquinazolinetetraones. These polymers, which were soluble in strong acids, had inherent viscosities in the range of 0.17–0.27. Thermogravimetric analyses indicated that they began to decompose at around 450°C in air.     

Synthesis and characterization of poly-α,β-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(glycolide) amphiphilic graft copolymers as potential drug carriers

A series of biodegradable amphiphilic graft polymers were successfully synthesized by grafting poly(glycolide) (PGA) sequences onto a water-soluble poly-α,β-[N-(2-hydroxyethyl)-_L-aspartamide] (PHEA) backbone. These novel graft polymers were synthesized by the ring-opening polymerization initiated by the macroinitiator PHEA bearing hydroxyl groups without adding any catalyst. The graft polymers were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance spectroscopy (¹H NMR), combined size-exclusion chromatography (SEC) and multiangle laser light scattering (MALLS) analysis, and differential scanning calorimetry (DSC). By controlling the feed ratio of the macroinitiator to the monomer, graft polymers with different branch lengths can be obtained. The degradation behaviors of the copolymers were studied. Based on the amphiphilicity of the graft copolymers, nanoparticle drug delivery systems were prepared by the direct dissolution method and the dialysis method, and the in vitro drug release behavior was investigated. Transmission electron microscopy (TEM) images demonstrated that these nanoparticles were regularly spherical in shape. The particle size and distribution of the nanoparticles were measured.     

Comparison of N,N′-bidentate ligands in copper-catalyzed atom transfer polymerization of styrene

Atom transfer polymerization of styrene using N-aryl-substituted pyridinimines and N,N′-diaryl-substituted diimines as N,N′-ligands in the presence of Cu(I)Br and 1-phenylethyl bromide has been investigated and compared with the analogous 2,2′-bipyridine system. A molar mass increase which is consistent for a controlled polymerization with a target molar mass of 10000 g · mol⁻¹ is observed with the 2,2′-bipyridine ( 1 ) and the pyridinimine ( 2a ) systems. The polymerization of styrene with the N,N′-diimine system ( 3 ) is much less controlled, yielding polymers with higher molar masses than expected.     

Quaternization of poly(tertiary aminostyrene)s and characterization of the quaternized polymers

The Menschutkin reaction of three poly(tertiary aminostyrene)s: poly(N,N-dimethyl-4-vinylphenylamine) (PPA), poly(N,N-dimethyl-4-vinylbenzylamine) (PBA), and poly(N,N-dimethyl-4-vinylphenethylamine) (PPTA) was investigated. These three polymers having narrow molecular weight distributions were prepared via anionic living polymerization. PPA reacted homogeneously with n-butyl bromide in N,N-dimethylformamide (DMF). PBA and PPTA also reacted homogeneously with n-butyl bromide in a mixture of DMF/methanol (75/25 v/v %). GPC measurement of the quaternized polymers was carried out using a mixture of water/acetonitrile (80/20 v/v %) containing 0.5M acetic acid and 0.3M sodium sulfate (pH = 2.9) as an eluant in order to suppress adsorption of the quaternized water soluble polymers on GPC gel. Results of GPC measurement indicate that the polymer chains of the three poly(tertiary aminostyrene)s are neither severed nor crosslinked in the process of quaternization. Temperature dependence and reaction time dependence on the degree of quaternization (DQ) were studied for PPT, PBA, and PPTA. By altering reaction time and temperature, the DQ values of the three poly(tertiary aminostyrene)s could be controlled in the range from 0% to nearly 100%. Quaternization reactivity of the amino groups in the three polymers was found to decrease in the order, PPTA, PBA, and PPA. The differences in reactivity are thought to be attributable to the electron density on the nitrogen atom of the N,N-dimethylamino group, and steric hindrance in the vicinity of the nitrogen atom. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1219–1226, 1997     

Electroinitiated Polymerization of 3,3-BIS(N-Carbazolylmethyl)Oxetane

Abstract

3,3-Bis(N-carbazolylmethyl)oxetane, a cyclic compound with carbazolyl substituents closely linked to the oxetane ring, was polymerized by electrochemical initiation in aprotic polar solvents using a quaternary ammonium salt as electrolyte. Colored polymers were obtained as thin films deposited on the anode and were characterized by IR, ¹H NMR, and thermogravimetry. The data obtained refute the classical cationic polymerization of oxetanes.     

Anionic synthesis of aromatic amide and carboxyl functionalized polymers. Chain-end functionalization of poly(styryl)lithium with N,N-diisopropyl-4-(1-phenylethenyl)benzamide

The novel syntheses of N,N-diisopropyl-4-benzoylbenzamide, N,N-diisopropyl-4-(1-hydroxy-1-phenylethyl)benzamide, and N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) are described. ω-Amidopolystyrene ( 2 ) was synthesized in quantitative yields by the reaction of poly(styryl)lithium with stoichiometric amounts of N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) in toluene/tetrahydrofuran (4 : 1 v/v) at −78°C. Deblocking of the amide protecting group by acid hydrolysis quantitatively provides the corresponding aromatic carboxyl chain-end functionalized polystyrene ( 3 ). The functionalization agent and functionalized polymers were characterized by HPLC, thin-layer chromatography, size exclusion chromatography, vapor phase osmometry, spectroscopy (¹H-NMR, ¹³C-NMR, and FTIR), potentiometry, and elemental analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1233–1241, 1998     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006     

Kinetics and mechanism of the anionic polymerization of cyclohexadienes initiated by naphthalene radical anions and dianions

The anionic polymerization of 1.3-cyclohexadiene (1.3-CHD) was investigated in temperatures that ranged from 25 to ?77°C. Initiation by lithium naphthalene (N^?·,Li⁺) in tetrahydrofuran at ?20°C yields polymers with fairly narrow molecular weight distribution. The M?_w of these polymers so prepared is ca. 20,000. Polymerization of 1.3-CHD conducted at room temperature is accompanied by the dehydrogenation and disproportionation of the monomer, especially when N^?·,K⁺ acts as initiator. Oligomers are formed when hexamethylphosphoramide is used as a solvent. The mechanism of the initiation of the polymerization of 1.3-CHD by N^?·,Li⁺ was elucidated and the rate constants at ?20°C in tetrahydrofuran of the elementary reactions were determined. It was established that the dianions formed by disproportionation of N^?·,Li⁺ act as effective initiators for 1.3-CHD. The adducts formed constitute the cyclohexanyl and naphthyl carbanionic groups. The former carbanions (λ_max ～ 275 nm) propagate the polymerization. The initially formed dimeric adducts are stabilized by the separation of the carbanionic end groups by the additional monomer units. Chain transfer to the monomer limits the growth of the polymers. The isomerization of the cyclohexadienyl anions, formed as result of chain transfer, may be followed by the elimination of lithium hydride. The latter reaction represents a termination step. Addition of 1.4-CHD to the reaction mixture enhances the chain transfer and the termination.     

Polymerization behavior of N-(p-vinyl)phenylacrylamide

The polymerization behavior of N-(p-vinyl)phenylacrylamide, synthesized from p-aminostyrene and acryloyl chloride by means of the Schotten-Baumann reaction was studied. Due to a marked difference in electron density between the two double bonds, this monomer provided soluble polymers by both cationic and anionic polymerization procedures, the cationic and anionic polymers mainly carrying, as side chains, the acrylamide and styrene moieties, respectively. The polymerization behavior of the residual double bonds was also investigated for both polymers, leading to crosslinked, insoluble products.