Structure investigation of poly(p-phenylene vinylene)

Electron diffraction patterns of highly oriented poly(p-phenylene vinylene) films obtained by the soluble polymeric precursor route are interpreted on the basis of a monoclinic unit cell containing two monomer units: c (chain axis) = 0.658 nm, a = 0.790 nm, b = 0.605 nm, α ? 123°. The molecules are nearly perfectly oriented along the stretching direction but exhibit partial axial translational disorder.     

Fabrication of poly(p-phenylene vinylene) (PPV) nanoheterocomposite films via layer-by-layer adsorption

The fabrication of polyelectrolyte multilayer film architectures composed of a polycation precursor (Pre-PPV) of the electroluminescent poly(p-phenylene vinylene) (PPV) and two different counter-polyanions, cellulosesulfate and poly(vinylsulfate), are reported. All multilayers were characterized by UV/VIS-spectroscopy and X-ray reflectometry. Due to the differences in spatial arrangement of charged groups, rigidity, and conformation of the polyanions, the corresponding multilayer films differ in properties such as average thickness increments and surface roughness. The adsorbed amounts per layer can be adjusted by addition of inorganic salts. Thermal conversion of Pre-PPV to PPV is achieved already slightly above 100 °C, yielding identical absorption spectra for after either 3 h at 160 °C or 20 h at 120 °C. The heat treatment causes the film thickness to be reduced by 24–40% due to elimination of dimethylsulfide and HCl and also the loss of water, but the films stay optically transparent.     

Theoretical investigation of substitution and end-group effects on poly(p-phenylene vinylene)s

Semi-empirical AM1 and ZINDO/S, as well as density function theory (DFT) method B3LYP/6-31G(d) quantum chemical calculations were carried out to study the electronic structures and optical properties of poly(p-phenylene vinylene) derivatives (PPVs) with 10 and 11 phenylene rings in the backbone. The calculations suggest that the assembly of alternate incorporation of CN and alkoxy substituted phenylene rings in the PPV backbone could be a good way to construct organic semiconductors with low HOMO/LUMO energy band-gaps. The effect of the end-group on the electronic structures and optical properties of the conjugated polymer was investigated by the calculated UV-Vis and UPS spectra. It was demonstrated that the aldehyde and phosphate end-groups have limited effects on the photophysical properties in the UV-visible range.     

Highly emissive supramolecular oligo(p-phenylene vinylene) dendrimers

pi-Conjugated oligo(p-phenylene vinylene) (OPV) guest molecules for interaction with dendritic hosts were synthesized and fully characterized by NMR spectroscopy, MALDI-TOF-MS, elemental analysis and optical measurements. The binding properties of the five different OPV guests to a N,N-bis[(3-adamantyl ureido) propyl] methylamine host have been investigated. The guests that contained an aryl urea glycine spacer were bound with the highest association constant. Subsequently, an adamantyl urea modified fifth generation poly(propylene imine) dendrimer was synthesized as a multivalent host which contains 32 N,N-bis[(3-adamantyl ureido) propyl] amine binding sites. Size exclusion chromatography showed that 32 of the OPV guests strongly bind to the fifth generation adamantyl functionalized dendritic host. In the case of the supramolecular dendritic host/guest system smooth homogeneous thin films could be obtained by spin coating. The dendritic guest-host complexes showed a significantly higher emission upon binding then that of the individual molecules due to the three-dimensional orientation of the OPV guest molecules. In the solid state, this enhancement in luminescence was a factor of 10. The pi-conjugated oligomers are less aggregated in the supramolecular assemblies presumably because of a shielding effect of the bulky adamantyl units present in the hosts.     

Ellipsometric examination of electrically conductive films of poly(2,5-thiophenediyl)

A polymer film formed by anodic oxidation of thiophene in acetonitrile on platinum at 2.08 V was examined by ellipsometry. The refraction index and absorption index were determined as a function of the wavelengths. The optical thickness was determined and compared with the electrical charge. Stoichiometric film growth by a two-electron reaction followed this comparison. The film properties studied were almost independent of the potential between −0.1 and +2.08 V. The time dependence of the ellipsometric parameter showed the film growth to be approximately linear with square root of time, typical for a diffusion controlled reaction.     

Theoretical study of the conversion of sulfonyl precursors into chains of poly(p-phenylene vinylene)

The elimination and side reactions involved in the thermal conversion of sulfonyl precursor chains into poly(p-phenylene vinylene) (PPV) have been studied in detail, using Density Functional theory, along with the MPW1K functional. The performance of the MPW1K functional for describing radical dissociation and internal conversion reactions of sulfonyl precursors has been assessed against the results of benchmark CCSD(T) calculations. Enthalpies as well as entropies are calculated at different temperatures at the level of the rigid rotor-harmonic oscillator approximation. Entropy effects on internal elimination reactions are very limited. In sharp contrast, at the temperatures under which the conversion is usually performed (550 K), entropy contributions to the activation energies are found to be very significant and to strongly favor direct radical dissociations of the precursors. Further radical side reactions following an E(i) conversion through an alkyl substituent may also significantly contribute to the formation of sp(3) defects and/or cross-linked structures in the polymer-an advantageous feature for the making of materials with improved photoluminescence efficiencies.     

Time-dependent density-functional calculations of S0-S1 transition energies of poly(p-phenylene vinylene)

We used time-dependent density-functional-theory (TDDFT) approaches to calculate absorption (S(0)-->S(1)) and emission (S(1)-->S(0)) transition energies of poly(p-phenylene vinylene) (PPV). The absorption and emission energies were estimated to be 2.44 and 2.16 eV, respectively, from the extrapolation of calculated results for oligomers. Comparisons with available experimental data demonstrated that TDDFT is a very reliable tool for investigating the electronic transitions of PPV.     

Interface formation of metals and poly(p-phenylene vinylene): surface species and band bending

We used X-ray photoemission spectroscopy (XPS) to investigate the surface species of poly(p-phenylene vinylene) (PPV) and its interface formation with Ca and Al. PPV surfaces compositions varied with sample preparation. For relatively "clean'' surfaces with 4–5% O, analysis of the O 1s peak revealed four types of oxygen species, namely carbonyl (C=O), hydroxyl (C–OH), ether (C–O–C) and the carboxylic groups (HO–C=O). The oxygen groups, excluding ether, reacted with Al or Ca to form the corresponding metal oxides. Chemical interactions between the metals and the phenylene and vinylene units to yield new species were not detected. For sulfur-free surfaces, a C 1s peak shift of +0.5 eV followed the deposition of 15–30 Å of Ca on PPV. For sulfur-containing surfaces, the C 1s peak shift was −0.5 eV. We attribute this difference to the interaction of metal atoms with the sulfur impurities. For Al/PPV, a C 1s peak shift occurred at <2 Å of Al deposition and reached a constant value of about +0.4 eV after ⪅8 Å of Al. Again, the direction of the peak shift depended on the presence of sulfur impurities. We attribute the C 1s peak shifts to surface band bending and to Schottky barrier formation. Since surface oxidation of PPV can inhibit band-bending, our overall results suggest that the barrier height at the metal/PPV interface is highly sensitive to the surface preparation and relatively insensitive to the work function of the metals. The shift seen by XPS in the C 1s core level spectra of PPV points clearly to charge transfer and Schottky barrier formation at the interface as a result of metal deposition. These results imply that the metal/polymer interface is not rigid and that triangular barrier tunneling fails to take into account the effect of barrier formation. We propose a band-bending modified tunneling (BBMT) model to explain charge transfer at the Ca/polymer interface. © 1997 John Wiley & Sons, Ltd.     

2H NMR characterization of phenylene ring flip motion in poly(p-phenylene vinylene) films

Solid-state ²H quadrupole echo nuclear magnetic resonance (NMR) spectra and measurements of ²H spin lattice relaxation times have been obtained for films of poly(p-phenylene vinylene) deuterated in phenylene ring positions (PPV-d₄). NMR line shapes show that all the phenylene rings of PPV undergo 180° rotational jumps about the 1,4 ring axis (“ring flips”) at 225°C. The temperature dependence of the ²H line shapes show that the jump motion is thermally activated, with a median activation energy, E_a = 15 kcal/mol, and a distribution of activation energies of less than ±2 kcal/mol. The jump rate was also determined from the magnitude of the anisotropic T₂ relaxation associated with ²H line shapes and from the curvature of inversion recovery intensity data. The experimental activation energy for jumps is comparable to the intramolecular potential barrier for rotation about phenylene vinylene bonds. ²H NMR provides a method for determining the phenylene-vinylene rotational barrier in pristine PPV, and may potentially be used to study conjugation in conducting films.     

Self-assembly and luminescence of oligo(p-phenylene vinylene) amphiphiles

We have synthesized a series of amphiphilic molecules consisting of oligo(phenylene vinylene) (OPV) asymmetrically end-substituted with a hydrophilic poly(ethylene glycol) (PEG) segment and a hydrophobic alkyl chain. This amphiphilic structure induces self-assembly into both thermotropic and lyotropic lamellar liquid crystalline (LC) phases. The molecules form strongly fluorescent, self-supporting gels in both water and polar organic solvents, even at high concentrations on the order of 30 wt %. These self-assembled structures have been characterized by small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and polarized optical microscopy (POM). Photoluminescence (PL) is influenced by the structure of the material, with enhanced emission in the LC state due to assembly of the chromophore in confined two-dimensional layers. Self-assembly controlling molecular aggregation at the nanoscale could significantly improve the performance of OPV-based materials in optoelectronic devices.     

可溶性聚对苯乙炔衍生物的合成

聚对苯乙炔（ＰＰＶ）具有独特的光电性能,经强氧化剂掺杂后是一类重要的导电材料［１］,而且具有良好的非线性光学（ＮＬＯ）性质［２］,也是目前性能最好的高分子电致发光材料［３,４］．可溶性的ＰＰＶ衍生物有望在显示领域广泛应用,从而成为电致发光领域研究的新...     

Bundling and diameter selectivity in HiPco SWNTs poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene) composites

Temperature-dependent (TD) Raman measurements at laser excitation 514.5 nm were performed at different concentrations. The spectral profile of the radial breathing modes were investigated up to a polymer concentration of 1 g/L and were found to be dominated by approximately 1.2-1.4 nm diameter tubes at room temperature. Upon heating above the glass transition of the polymer (60 degrees C) the smaller tubes around approximately 0.9 nm increased significantly in relative intensity. This suggests that below the glass transition of the polymer (60 degrees C) RBMs within the composite are damped and spectral changes cannot be interpreted as diameter selective solubilization. The observed RBM damping at room temperature only occurred up to a concentration of approximately 1.2 x 10(-4) g/L and below this no damping was observed. Photoluminescence intensity (PL) measurements were taken for a range of PmPV concentrations, in which HiPco single walled carbon nanotubes (SWNTs) at 100%, 10%, 1%, 0.1%, 0.01%, and 0% mass fractions were added. Fitting of the concentration dependence to a dynamic absorption/desorption model indicates that the polymer interacts with nanotube bundles until a critical concentration of approximately 1.2 x 10(-4) g/L is reached, below which the nanotubes are isolated. The polymer and or solvent has a significant effect on the debundling and aggregation within these systems. Aggregation and/or interaction with the polymer at higher concentrations can effect the RBM profile in the composite at ambient temperatures, providing an incomplete representation of the selection of diameters present within composites at a particular wavelength.     

Temperature-induced nucleation of poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene) crystallization by HiPco single-walled carbon nanotubes

Hybrid systems of the conjugated organic polymer poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene)(PmPV) and HiPco single-walled carbon nanotubes (SWNTs) are explored using spectroscopic and thermal techniques to determine specific interactions. Vibrational spectroscopy indicates a weak interaction, and this is further elucidated using differential scanning calorimetry (DSC), confocal laser scanning microscopy, temperature-dependent Raman spectroscopy, and temperature-dependent infrared spectroscopy of the raw materials and the composite. An endothermic transition is observed in the DSC of both the polymer and the 0.1% HiPco composite in the region of 50 degrees C. Also observed in the DSC of the composite is a double-peaked endotherm at -39 and -49 degrees C, which does not appear in the polymer. The Raman spectroscopy of the polymer upon increasing the temperature to 60 degrees C shows a diminished cis-vinylene mode at 1575 cm(-1), with an increase in relative intensity of the trans-vinylene mode at 1630 cm(-1). Partially irreversible change in isomerization suggests increased order in the polymer. This change in the polymer is also manifest in the Raman composite spectrum upon increase of the temperature to 60 degrees C, where the spectrum becomes abruptly dominated by nanotubes. Raman spectroscopy of the composite shows no change at -35 degrees C; however, infrared absorption measurements suggest that the transition at -35 degrees C derives from the polymer side chains. Here the composite at -35 degrees C shows a change in the absorbance of the polymer side chain aryl-oxide linkage at 1250 cm(-1) and alkyl-oxide stretch at 1050 cm(-1). Infrared spectra thus suggest that the transitions in the lower temperature region around -35 degrees C are side chain-induced, while Raman spectra suggest that the transition at 60 degrees C is backbone-induced. Furthermore, temperature cycling induces an irreversible decrease in the mean fluorescence intensity of the polymer, coupled with a further reduction in the mean fluorescence intensity of the composite. This suggests that an increase in crystallization of the composite is supported and enhanced by an increase in ordering of the polymer. Implications are discussed.     

Fractal-like self-assembly of oligo(p-phenylene vinylene) capped gold nanoparticles

Reversible interparticle self-organization is reported for gold nanoparticles functionalized with an oligo(p-phenylene vinylene) moiety in butanol. The aggregates show a clear melting temperature at 80 degrees C, and atomic force microscopy and transmission electron microscopy indicate a fractal-like organization of the particles.     

Syntheses of new poly (arylene vinylene) analogues: Poly (4,7-benzofuran vinylene) and poly (4,7-benzothiophene vinylene)

The reaction of bis(4,7-tetrahydrothiopheniomethyl) benzofuran dibromide with aqueous tetramethylammonium hydroxide leads to a water-soluble polyelectrolyte which can be film cast and thermolytically eliminated to give poly(4,7-benzofuran vinylene) (PBFV). Subjection of bis(4,7-tetrahydrothiopheniomethyl) benzothiophene dibromide to the same reaction sequence gives poly(4,7-benzothiophene vinylene) (PBTV). UV-VIS studies show that PBFV has a band gap of 2.76 eV, while PBTV has a band gap of 2.92 eV. These polymers are members of a new class of conjugated poly (arylene vinylene)s, in which heterocyclic pseudoaromatic rings are fused onto a poly(1,4-phenylene vinylene) backbone. © 1994 John Wiley & Sons, Inc.     

N-substituted poly(p-phenylene terephthalamide)

N-substituted poly(p-phenylene terephthalamide)s (PPTA), such as N-alkylated, N-aralkylated, and N-carboxymethylated poly(p-phenylene terephthalamide), were synthesized from PPTA and the corresponding halides by the polymer reaction via the metalation reaction in a solution of sodium methylsulfinylcarbanion in dimethyl sulfoxide at low temperature. The introduction of various substitutional groups into the amide groups of PPTA increased their solubilities, but decreased their thermal stabilities compared with PPTA. The effects of various substitutional groups on the thermal properties and the solubilities are discussed. Liquid crystal formation was noticed for PPTA substituted with bulky groups such as 9-anthrylmethyl group.     

聚对苯撑乙烯类电致发光材料研究进展

从聚合物结构修饰、复合/共混以及合成工艺等方面概述了近十多年来聚对苯撑乙烯衍生物的研究进展和发展趋势.为获得高效、稳定、可溶的PPVs型有机光电材料,可通过引入吸电子基团(如氟原子、氰基、含氮杂环等)等对其结构进行修饰来改善其平衡电荷传输的能力进而提高其发光效率;同时,通过引入长链取代基和液晶单元结构来兼顾聚合物的溶解性和稳定性,以提高材料的可加工性和器件的稳定性.通过复合/共混可以控制聚合物膜的聚集态来提高发光效率.