Surface modification of polymers. III. Grafting of stabilizers onto polymer films

Polypropylene, polystyrene, and polyethylene have been grafted with glycidyl acrylate and glycidyl methacrylate. After 5 min of grafting with UV irradiation, polystyrene was extensively grafted to 91% coverage of glycidyl acrylate according to ESCA, while polypropylene was grafted to only 50% coverage. With glycidyl acrylate the grafting depth is estimated to be 0.1 μm for PP and 0.23 μm for PS. Glycidyl methacrylate is grafted in a thinner layer than glycidyl acrylate. The stabilizers 2,4-dihydroxybenzophenone, phenyl 4-aminosalicylate, and 4-amino-2,2,6,6-tetramethylpiperidine were attached to LDPE surfaces containing grafted glycidyl acrylate by opening of the epoxide bond. The reaction between epoxide and stabilizer is diffusion controlled at high concentrations of stabilizer. UV spectroscopy on an LDPE film grafted and reacted with 2,4-dihydroxybenzophenone showed that 227 nmol stabilizer/cm² was bound to the surface.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Surface modification of polymers. II. Grafting with glycidyl acrylates and the reactions of the grafted surfaces with amines

The surface of low density polyethylene has been grafted with glycidyl acrylate and glycidyl methacrylate by photoinitiation. ESCA measurements on the grafted surface showed a 72% coverage for glycidyl acrylate and 52% for glycidyl methacrylate after 10 min of grafting with UV irradiation. ATR–IR showed a 10 times more extensive grafting for glycidyl acrylate than for glycidyl methacrylate after 10 min of grafting, indicating reaction to deeper layers. Acetone and ethanol were used as solvents: acetone yielded slightly more grafting at the surface. The grafted surfaces were reacted with 2M solutions of aniline and propylamine in ethanol. After 4 h reaction at 60°C, with aniline 52% of the epoxy groups while for propylamine 96% of the groups were consumed, as measured with ATR–IR.     

Surface modification of multiwalled carbon nanotubes with biocompatible polymers via ring opening and living anionic surface initiated polymerization. Kinetics and crystallization behavior

Multiwalled carbon nanotubes (MWNTs) were functionalized with 2‐hydroxyethyl benzocyclobutene (BCB‐EO) through a Diels–Alder cycloaddition reaction. The functionalized MWNTs were utilized for the surface initiated ring opening (ROP) catalyzed and anionic polymerization of ε‐caprolactone (ε‐CL) and ethylene oxide (EO), respectively. The kinetics of the ROP of ε‐CL was monitored through thermogravimetric analysis (TGA) which revealed that the polymerization proceeds very fast as compared to that of EO and that both polymerizations could be controlled with time. ¹H NMR, Raman and FTIR spectroscopy, TGA, DSC, and transmission electron microscopy (TEM) were employed for the characterization of these polymer/CNT hybrids. DSC results showed that a remarkable nucleation effect is produced by MWNTs that reduced the supercooling needed for crystallization of both PεCL and PEO. Furthermore, the isothermal crystallization kinetics of the grafted PεCL and PEO was substantially accelerated compared to the neat polymers. The strong impact on the nucleation and crystallization kinetics is attributed to the covalent MWNT‐polymer bonding. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4379–4390, 2009     

Surface modification of biomedical polymers

Surface modification of biomedical polymers by the technique of surface grafting was briefly overviewed, mostly based on our results. It was shown that surface grafting of water-soluble polymer chains onto polymeric biomaterials was effective in producing mechanically non-stimulative, blood-compatible, antibacterial, tissue-bonding, and cell-adhesive surfaces. In addition to the improvement of the interfacial biocompatibility, the surface grafting was useful also for obtaining a biofunctional surface such as immunoadsorbent.     

Surface modification of polymers. V. Biomaterial applications

Polyethylene films were surface grafted with glycidyl methacrylate (GMA) by UV irradiating the film for 5 min together with benzophenone. Poly(ethylene glycol) (PEG) was attached to the grafted surface through reaction with the epoxy groups. This yielded a surface which consisted of 95% PEG as measured with ESCA. The adsorption of human transferrin onto this film was significantly reduced as compared with a pure polyethylene film. Heparin was also reacted with a GMA grafted PE surface. ESCA showed that heparin was grafted to the surface, and in vitro blood clotting tests on the heparinized PE surface showed a reduced thrombus formation. GMA grafted polystyrene wells were reacted with carbohydrazide, to the formed carbohydrazide surface a rabbit antibody raised against mouse urinary protein (RaMUP) was covalently coupled. The RaMUP coupled surfaces was used in the detection of mouse urinary protein (MUP) at low concentrations (ca. 1 ng/mL) with an ELISA technique.     

Surface modification of polymers. I. Vapour phase photografting with acrylic acid

Surfaces of low density polyethylene, high density polyethylene, and polystyrene have been modified by grafting with acrylic acid. Benzophenone and acrylic acid in the vapor phase were UV-irradiated in the presence of a polymer substrate. Grafting with acrylic acid took place in a thin layer on the surface, thus increasing the wettability of the polymer. After 5 min of irradiation, the contact angle against water had decreased to 20° for polystyrene and 50° for the polyethylene samples. ESCA measurements on samples irradiated for 5 min showed a 90% poly(acrylic acid) coverage of the surface for polystyrene, 63% for low density polyethylene, and 56% for high density polyethylene. Acetone or ethanol were used as carriers of monomer and initiator. Acetone was able to initiate grafting and was found to promote and direct grafting to the surface. The stability of the acrylic acid grafted surfaces was studied by contact angle measurements and ESCA. At room temperature, the grafted layer is confined to the surface, but when the material was heated in air the surface was reshaped into a hydrophobic one. The process was reversible. In aqueous surroundings at elevated temperatures the hydrophilic character of the surface was restored.     

Molecular dynamics of alkyl radicals grafted onto silica surface

Correlation times for≡SiOC·X₂ radicals grafted onto activated silica surface were estimated to be 1.3·10⁻⁸s (X=H) and 2.5·10⁻⁸s (X=Me) at room temperature. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 613–616, April, 1998.     

Surface modification of polymeric ultrafiltration membranes: III. Effect of plasma-chemical surface modification onto some characteristics of polyacrylonitrile ultrafiltration membranes

Plasma-chemical surface modification of polyacrilonitrile ultrafiltration membranes is presented here including surface pre-activation by treatment in cold plasma, obtained in dielectric barrier discharge at atmospheric pressure, and following chemical grafting of mono-functional polyethylene glycol (PEG) chains. The effect of such plasma-chemical modification onto the physico-chemical characteristics of the membrane surface as well as onto some basic working membrane characteristics such as productivity and selectivity was studied. XPS analysis was employed to control the chemical composition of the membrane surface. Contact angle measurement was used to characterize the hydrophilic/hydrophobic balance on the surface. Membrane structure was imaged by SEM observations.     

Effect of polymerization conditions on the molecular weight of polystyrene grafted onto silica in the radical graft polymerization initiated by azo or peroxyester groups introduced onto the surface

The effect of polymerization conditions on the molecular weight of polystyrene grafted onto silica obtained from the radical graft polymerization initiated by azo and peroxyester groups introduced onto the surface was investigated. The molecular weight of polystyrene grafted onto silica obtained from the radical graft polymerization initiated by surface azo and peroxyester groups decreased with decreasing monomer concentration and polymerization temperature. The molecular weight of polystyrene was found to be controlled to some extent by the addition of a chain transfer agent. The molecular weight of grafted chain on silica surface obtained from the graft polymerization initiated by surface radicals formed by photodecomposition of azo groups was considerably smaller than that by thermal decomposition. The number of grafted polystyrene in photopolymeriztion, however, was much larger than that in thermal polymerization. These results are explained by the blocking of surface radicals formed on the silica surface by previously grafted polymer chain: when the decomposition of surface azo and peroxyester groups proceed instantaneously at the initial stage of the polymerization, the number of grafted polymer chains increased.     

Surface modification. I. Polyacrolein microspheres covalently bonded onto polyethylene

The synthesis and characterization of novel surfaces composed of polyacrolein microspheres covalently bonded onto polyethylene films are described. These surfaces were prepared through a sequence of reactions carried out onto polyethylene films in order to form primary amine groups at the w position. Polyacrolein microspheres in water were then covalently bonded to these modified polyethylene surfaces. The binding between the microspheres and the modified surfaces is due to the interaction between the aldehyde groups of the microspheres and the amine groups of the modified surfaces to form the polyvalent Schiff base bonds. Fourier transform-infrared/attenuated total reflection, electron spectroscopy for chemical analysis, contact angle measurements, and scanning electron microscopy have been used for the characterization of the modified polyethylene surfaces.     

Preparation and characterization of thermosensitive polymers grafted onto silica-coated iron oxide nanoparticles

In this study, multifunctional nanoparticles containing thermosensitive polymers grafted onto the surfaces of 6-nm monodisperse Fe(3)O(4) magnetic nanoparticles coated by silica were synthesized using reverse microemulsions and free radical polymerization. The magnetic properties of SiO(2)/Fe(3)O(4) nanoparticles show superparamagnetic behavior. Thermosensitive PNIPAM (poly(N-isopropylacrylamide)) was then grafted onto the surfaces of SiO(2)/Fe(3)O(4) nanoparticles, generating thermosensitive and magnetic properties of nanocomposites. The sizes of fabricated nanoparticles with core-shell structure are controlled at about 30 nm and each nanoparticle contains only one monodisperse Fe(3)O(4) core. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles measured using DSC was at around 34-36 degrees C. The magnetic characteristics of these multifunctional nanoparticles were also superparamagnetic.     

Thermal degradation of polymers with phenylene units in the chain. IV. Aromatic polyamides and polyimides

The breakdown mechanism of an aromatic polyamide and four polyimides has been studied under vacuum in the temperature range of 375–620°C, by using techniques described earlier, involving collection and analysis of volatile products as well as analyses of residues at different temperatures. The decomposition of the polyamide up to 375°C yielded predominantly carbon dioxide, while between 375 and 450°C about equal amounts of carbon dioxide and carbon monoxide formed. Hydrogen is the major product between 450 and 550°C, along with hydrogen cyanide, methane, and carbon monoxide. The major reaction at the lower temperatures seems to be the cleavage of the linkage between the carbonyl group and the ring, with subsequent formation of a carbodiimide linkage via isocyanate intermediates, and liberation of carbon dioxide. Alternatively, cleavage between the carboxyl and the NH-group leads to the formation of carbon monoxide. Carbon dioxide and carbon monoxide are also the major volatile decomposition products of the polyimides at the lower temperatures. The primary cleavage reaction is believed to be the rupture of the imide ring between a carbonyl and nitrogen, with subsequent formation of isocyanate groups. The latter react with each other to form carbodiimide linkages and carbon dioxide, while the remaining benzoyl radical is the source for carbon monoxide.     

Grafting of polymers with controlled molecular weight onto ultrafine silica surface

To graft polymers with controlled molecular weight and narrow molecular weight distribution, the grafting of polymers onto ultrafine silica surface by the termination of living polymer cation with amino groups introduced onto the surface was investigated. The introduction of amino or N-phenylamino groups onto the silica surface was achieved by the treatment of silica with γ-aminopropyltriethxysilane or N-phenyl-γ-aminopropyltrimethoxysilane. It was found that these amino groups on silica are readily reacted with living poly(isobutyl vinyl ether) (polyIBVE), which was generated with CF₃COOH/ZnCl₂ initiating system, and polyIBVE with controlled molecular weight and narrow molecular weight distribution is grafted onto the surface. By the termination of living poly(2-methyl-2-oxazoline), which was generated with methyl p-toluenesulfonate initiator, with amino groups on silica, polyMeOZO was also grafted onto the surface. The percentage of grafting of polymer onto the silica surface decreased with increasing molecular weight of the living polymer, because the steric hindrance of silica surface increases with increasing molecular weight of living polymer. Polymer-grafted silica gave a stable dispersion in a good solvent for grafted chains. © 1995 John Wiley & Sons, Inc.     

Surface modification of polymers by photoinitiated graft polymerization

Two methods for modification of polymer surfaces by photoinitiated grafting have been developed and applied to films and fibers of synthetic polymers, e.g. polyethylene and polypropylene with acrylic monomers. In the batch process the substrate is enclosed in a cell containing initiator and monomer vapor. UV light through a quartz window initiates the grafting reaction by exciting the initiator (e.g. benzophenone). The grafting reaction is slow (1 to 3 min) due to the inefficient transfer of initiator and monomer through vapor phase. In the continuous process the substrate is presoaked in a solution of initiator and monomer and then drawn into a reactor “on line” where the substrate is irradiated by UV light through a quartz window. The grafting takes place in the very thin surface layer of solution on the substrate. The grafting efficiency is high (70–80% of the polymer formed is grafted) and the process is rapid (5–15 s due to the efficient transfer of initiator and monomer through the liquid phase. The continuous surface grafting process is promising for industrial applications.     

Laser surface modification of polymers to improve biocompatibility: HEMA grafted PDMS, in vitro assay—III

Polydimethylsiloxane (PDMS) surface modifications were carried out using CO₂-pulsed laser, without photosensitizer at ambient condition, to introduce peroxide groups onto the PDMS surface. Such peroxides were capable of initiating graft polymerization of 2-hydroxyethyl methacrylate (HEMA) onto the PDMS. The modified surfaces were characterized using a variety of techniques including scanning electron microscopy (SEM), attenuated total reflectance infrared (ATR-FTIR) and the water drop contact angle measurements. Data from in vitro assays indicated a significant reduction of the platelet adhesion and aggregation for the modified surfaces.     

Shielded molecularly imprinted polymers prepared with a selective surface modification

Uniformly sized, molecularly imprinted polymers (MIPs) of bisphenol A (BPA), one of many potential endocrine disruptors, were prepared by selective surface modification and immobilized at intervals of functional monomers with 4,4′‐methylenebisphenol as a pseudotemplate. MIPs for BPA were prepared with 4‐vinyl pyridine immobilized at the most effective interval and with ethylene glycol dimethacrylate monomer as a functional crosslinker. The prepared MIPs were surface‐modified with both polar and ionic monomers with different modification methods and then evaluated to reveal their selectivity and retention characteristics. Some of the modified MIPs showed significant selectivity for BPA retention when they were used as high‐performance liquid chromatography (HPLC) stationary phases, in comparison with ordinary MIPs. This effect of molecular imprinting was retained even after the surface modification of MIPs. The MIPs employed as pretreatment media for a column‐switching HPLC system provided a detection limit as low as 1 ng/L (ppt) by electrochemical detection. Actual samples, including Suwannee River natural organic matter (NOM), were analyzed for BPA, and BPA was quantitatively detected in NOM even with the combination with widely used UV detection because of the effective removal of interference afforded by an effective surface modification of the MIPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2048–2060, 2005     

Effect of surface grafted polymers on the adsorption of different model proteins

Adsorption of a model protein to a surface with end-grafted polymers was studied by Monte Carlo simulations. In the model the effect on protein adsorption in the presence of end-grafted polymers was evaluated by calculating the change in free energy between an end-grafted surface and a surface without polymers. The change in free energy was calculated using statistical mechanical perturbation theory. Apart from ordinary athermal polymer-polymer and protein-polymer interactions we also study a broad selection of systems by varying the interaction between proteins and polymers and effective polymer-solvent interactions. The interactions between the molecules span an interval from -0.5 to +0.5 kT. Consequently, general features of protein adsorption to end-grafted surfaces is investigated by systematically changing properties like hydrophilicity/hydrophobicity of the polymer, protein and surface as well as grafting density, degree of polymerization and protein size. Increasing grafting density as well as degree of polymerization decreases the adsorption of protein except in systems with attractive polymer-protein interactions, where adsorption increases with increasing chain length and higher grafting density. At a critical polymer-protein interaction neither chain length nor grafting density affects the free energy of adsorption. Hydrophilic polymers were found to prevent adsorption better than hydrophobic polymers. Very small particles with radii comparable to the size of a polymer segment were, however, better excluded from the surface when using hydrophobic than hydrophilic polymers. For systems with attractive polymer-protein interaction not only the volume of the protein was shown to be of importance but also the size of the exposed surface.     

Surface grafting of polymers onto inorganic ultrafine particles: Reaction of functional polymers with acid anhydride groups introduced onto inorganic ultrafine particles

The surface grafting onto inorganic ultrafine particles, such as silica, titanium oxide, and ferrite, by the reaction of acid anhydride groups on the surfaces with functional polymers having hydroxyl and amino groups was examined. The introduction of acid anhydride groups onto inorganic ultrafine particle was achieved by the reaction of hydroxyl groups on these surfaces with 4-trimethoxysilyltetrahydrophthalic anhydride in toluene. The amount of acid anhydride groups introduced onto the surface of ultrafine silica, titanium oxide, and ferrite was determined to be 0.96, 0.47, and 0.31 mmol/g, respectively, by elemental analysis. Functional polymers having terminal hydroxyl or amino groups, such as diol-type poly(propylene glycol) (PPG), and diamine-type polydimethylsiloxane (SDA), reacted with acid anhydride groups on these ultrafine particles to give polymer-grafted ultrafine particles: PPG and SDA were considered to be grafted onto these surfaces with ester and amide bond, respectively. The percentage of grafting increased with increasing acid anhydride group content of the surface: the percentage of grafting of SDA (M_n = 3.9 × 10³) onto silica, titanium oxide, and ferrite reaching 64.7, 33.7, and 24.1%, respectively. These polymer-grafted ultrafine particles gave a stable colloidal dispersion in organic solvents.