Copolymerization of butyl vinyl ether and methyl methacrylate by combination of radical and radical promoted cationic mechanisms

Butyl vinyl ether (BVE) and methyl methacrylate (MMA) mixtures were polymerized by using free radical initiators in conjunction with a cationic initiator such as diphenyl iodonium salt. Polymerization mechanism involves free radical polymerization of MMA which is switched to cationic polymerization of BVE by addition of growing poly(MMA) radicals to BVE and subsequent oxidation of electron donating polymeric radicals to the corresponding cations by iodonium ions. Two representative bifunctional monomers, ethylene glycol divinyl ether (EGDVE) and ethylene glycol dimethacrylate (EGDMA) were also used together with MMA and BVE, respectively, in photo and thermal crosslinking polymerizations. Vinyl ether and methacrylate type monomers can successfully be copolymerized by this double-mode polymerization under photochemical conditions.     

Vinyl polymerization by lithium organocuprates

Vinyl polymerizations initiated by lithium organocuprates under several conditions were investigated. It was observed that this catalyst was effective in the polymerization of specific monomers such as α,β-unsaturated nitrile and carbonyl analogues. The rate of polymerization was rapid but retarded by the addition of pyridine, nitrobenzene, or hydroquinone. Polymerization of methyl methacrylate (MMA) with lithium di-n-butylcuprate as initiator produces predominantly isotactic poly(methyl methacrylate) (PMMA) in toluene. The overall activation energy was estimated as 3.5 kcal/mol deg. Lithium di-n-butylcuprate exerts a higher stereoregulating effect on the addition of monomers than other organolithium initiators. It is proposed that polymerization proceeds via a coordinated anionic mechanism.     

Fluorocarbon‐ended polymers: Metal catalyzed radical and living radical polymerizations initiated by perfluoroalkylsulfonyl halides

Perfluoroalkylsulfonyl chlorides and bromides initiate metal catalyzed free radical polymerization of both hydrocarbon and fluorocarbon monomers affording polymers with perfluoroalkyl end groups. In the case of styrene (S) and methyl methacrylate (MMA) with Cu‐based catalysts the process affords polymers with a relatively narrow molecular weight distribution and linear dependence of molecular weight on conversion, suggesting that a living radical polymerization mechanism occurs. The orders of reaction in monomer, initiator and catalyst for these polymerizations were determined. In the case of PMMA, the detailed structure of a perfluorobutane chain‐end was determined by NMR analysis. Perfluoroalkylsulfonyl chlorides are stable in neutral aqueous media. This permits their use as initators for fluoroolefin polymerizations in H₂O. Poly(tetrafluoroethylene‐co‐hexafluoropropylene) was obtained in good yield with few ionic end groups. The aqueous fluoroolefin polymerization appears to be catalyzed by metal zero species from the reactor walls. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3313–3335, 2000     

ARGET ATRP of methyl methacrylate with 2-(8-heptadecenyl)-4,5-dihydro-1H-imidazole-1-ethylamine (OLC) as both ligand and reducing agent in the presence of air

Copper(II)-mediated activators regenerated by electron transfer for atom transfer radical polymerization of methyl methacrylate (MMA) was successfully carried out in a limited amount of air in the presence of 2-(8-heptadecenyl)-4,5-dihydro-1H-Imidazole-1-ethylamine as ligand that served not only as ligand but also as reducing agents. Reduction of Cu(II) to Cu(I) by an excess amount of nitrogen-based ligand was followed by UV–visible spectroscopy. The kinetics of the polymerizations and effect of different polymerization conditions are investigated. It is found that the polymerization of MMA can be conducted well even if the amount of Cu(II) is as low as 1 mol% catalyst relative to initiator. The results of the polymerizations demonstrate the features of “living”/controlled free-radical polymerization, such as the number-average molecular weights being close to their corresponding theoretical values and increasing linearly with monomer conversion, and narrow molecular weight distributions. Chain extension of poly(methyl methacrylate)s with MMA was successful and demonstrated well-maintained end-group functionality.     

Atom transfer radical polymerization initiated by N‐bromosuccinimide

N‐Bromosuccinimide (NBS) was used as the initiator in the atom transfer radical polymerizations of styrene (St) and methyl methacrylate (MMA). The NBS/CuBr/bipyridine (bpy) system shows good controllability for both polymerizations and yields polymers with polydispersity indexes ranging from 1.18 to 1.25 for St and 1.14 to 1.41 for MMA, depending on the conditions used. The end‐group analysis of poly(MMA) and polystyrene indicated the polymerization is initiated by the succinimidyl radicals formed from the redox reaction of NBS with CuBr/bpy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5811–5816, 2004     

Macromonomer synthesis using α‐(2‐methyl‐2‐phenylpropyl)acrylates as addition–fragmentation chain‐transfer agents expelling the cumyl radical

α‐(2‐Methyl‐2‐phenylpropyl)acrylate (RS‐2) was examined as a C? C bond‐cleavage type addition–fragmentation chain transfer (AFCT) agent in the benzene solution polymerizations of styrene (St), ethyl methacrylate (EMA), and cyclohexyl acrylate (CHA) with the objective of achieving efficient macromonomer synthesis by radical polymerization. The AFCT efficiency was evaluated in terms of the decrease in the number‐average molecular weight (M_n) upon the addition of the AFCT agent and the number of unsaturated end groups introduced per chain (f). The AFCT efficiency was rationalized by the consideration of the relative importance of AFCT as an end‐forming event and the competition between ‐fragmentation and crosspropagation as adduct radical reaction pathways. In St and EMA polymerizations at 60 °C, RS‐2 resulted in higher f values and lower M_n values than methyl α‐(2‐methyl‐2‐carbomethoxypropyl)acrylate (MMA‐2), and this suggested the facilitation of ‐fragmentation due to the expulsion of the more stable cumyl radical from the RS‐2 adduct radical. Higher f values were observed for MMA‐2 than for RS‐2 in CHA polymerization because of unsaturated end group formation by ‐fragmentation of midchain radicals. However, RS‐2 resulted in lower M_n values for poly(CHA) than MMA‐2 because of a smaller contribution of crosspropagation. Retardation in the presence of the AFCT agents was affected by the balance between b‐fragmentation and crosspropagation and by the addition rate of the propagating radical to the AFCT agent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6021–6030, 2004     

CuX2络合物催化甲基丙烯酸甲酯的氧化聚合

研究了高氧化态过渡金属卤化物络合物催化甲基丙烯酸甲酯(MMA)的氧化聚合.首先在叔胺类聚合物存在条件下以CuBr2/2,2′-联吡啶(bPy)络合物催化MMA在不同溶剂中的氧化聚合,结果在环己酮中得到PMMA均聚物,CuBr2/bPy同叔胺的氧化还原引发可以忽略.随后在环己酮中分别以不同络合物催化MMA的氧化聚合.结果...     

EPR study of the atom transfer radical polymerization (ATRP) of (meth)acrylates

Electron paramagnetic resonance (EPR) spectroscopy was applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and methyl acrylate (MA) in order to investigate the mechanism of the controlled/“living” radical polymerization system. Although initially only copper(I) species was added to the system as a catalyst, EPR signals of copper(II) species were observed during the polymerization of MMA initiated by ethyl 2-bromoisobutyrate and p-methylbenzenesulfonyl chloride, and polymerization of MA initiated by methyl 2-bromopropionate. As the polymerization proceeded, the concentration of copper(II) increased gradually until a steady state was reached. The EPR results indicate that 5–6% of copper(I) species converted to copper(II) species in polymerization of MMA and about 3% in polymerization of MA at 90°C.     

Atom transfer radical polymerization from nanoparticles: a tool for the preparation of well-defined hybrid nanostructures and for understanding the chemistry of controlled/"living" radical polymerizations from surfaces

Structurally well-defined polymer--nanoparticle hybrids were prepared by modifying the surface of silica nanoparticles with initiators for atom transfer radical polymerization and by using these initiator-modified nanoparticles as macroinitiators. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polystyrene or poly(methyl methacrylate) layer. In both cases, linear kinetic plots, linear plots of molecular weight (M(n)) versus conversion, increases in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M(w)/M(n)) for the grafted polymer samples were observed. Polymerizations of styrene from smaller (75-nm-diameter) silica nanoparticles exhibited good molecular weight control, while polymerizations of methyl methacrylate (MMA) from the same nanoparticles exhibited good molecular weight control only when a small amount of free initiator was added to the polymerization solution. The difference in polymerization behavior for styrene and MMA was ascribed to the facts that styrene undergoes thermal self-initiation while MMA does not and that termination processes involving freely diffusing chains are faster than those involving surface-bound chains. The polymerizations of both styrene and MMA from larger (300-nm-diameter) silica nanoparticles did not exhibit molecular weight control. This lack of control was ascribed to the very high initial monomer-to-initiator ratio in these polymerizations. Molecular weight control was induced by the addition of a small amount of free initiator to the polymerization but was not induced when 5--15 mol % of deactivator (Cu(II) complex) was added.     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

A novel acrylate carrying a hindered phenol moiety as monomer and terminator in radical polymerization

Radical polymerizations of methyl methacrylate (MMA), styrene (St), and vinyl acetate (VAc) were carried out in the presence of a novel phenyl acrylate derivative bearing a hindered phenol moiety (HPA). It has been clarified that HPA acts as a retarder and inhibitor for the polymerizations of MMA and VAc, respectively, and that in the polymerization of St it behaves as a monomer to give a copolymer. These additive effects were interpreted in terms of intramolecular transfer of the phenolic hydrogen in competition with propagation of the HPA radical to monomers. © 1994 John Wiley & Sons, Inc.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

Universal iterative strategy for the divergent synthesis of dendritic macromolecules from conventional monomers by a combination of living radical polymerization and irreversible TERminator multifunctional INItiator (TERMINI)

A new synthetic concept named TERMINI that stands for irreversible TERminator Multifunctional INItiator is reported. Suitable combinations of TERMINI and living polymerizations provide access to strategies for the design and synthesis of unprecedented complex molecular and macromolecular architectures from a diversity of commercial monomers. TERMINI represents a masked multifunctional initiator designed to quantitatively and irreversibly interrupt a chain organic reaction or a living polymerization. After demasking, the TERMINI repeat unit enables the quantitative reinitiation, in the presence or absence of a catalyst, of the same or a different living polymerization or a chain organic reaction in more than one direction, thus becoming a branching point. The demonstration of this concept was made by using a combination of metal-catalyzed living radical polymerization (LRP) and (1,1-dimethylethyl)[[1-[3,5-bis(S-phenyl 4-N,N'-diethylthiocarbamate)phenyl]ethenyl]oxy]dimethylsilane as TERMINI, to elaborate a novel iterative divergent method for the synthesis of dendritic macromolecules based on methyl methacrylate (MMA).     

Catalytic Effect of Dimethylsulfoxide Complexes of Rh(III) and Ru(II) on the Polymerization of Vinyl Monomers Initiated by 2,2′-Azobisisobutyronitrile

Transition metal salts and complexes catalyze the polymerization of vinyl monomers in the presence or absence of 2,2′-azobisisobutyronitrile (AIBN). In this article the effect of some dimethyl sulfoxide complexes of Rh(III) and Ru(II) on the polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) initiated by AIBN is reported. The percentage conversion and the rate of polymerization of MMA and MA are found to increase rapidly with time. At the critical concentrations of the complexes, the percentage conversion and the rates of reaction are found to be higher than those with AIBN alone, which significantly proves their accelerating effect. At concentrations above and below that of the critical value, the percentage conversion and the rates of polymerization of MMA and MA are found to decrease from those with AIBN alone. The trend of the increase and decrease of the percentage conversion and the rate of reaction with both types of complexes are similar. The solvent used in the polymerization of MMA and MA is dimethylsulfoxide (DMSO) and the temperature of the reaction is 60°C. A precise mechanism for the catalytic reaction is suggested.     

通过活性自由基聚合制备结构精致的大分子单体

合成了一种新型单体引发转移终止剂,2-N,N-二乙基二硫代氨基甲酰氧基乙酸烯丙酯(ADCA)。在紫外光照射下,引发剂量的ADCA能分别引甲基丙烯酸甲酯(MMA)和苯乙烯(St)聚合,聚合过程具有活性聚合的特征,即所得聚合物的数均分子量随着单体转化率的增加而线性增加,经1^HNMR分析证明,所得聚合物为一大分子单体,具有α-烯丙氧基羰甲基和ω-N,N-二乙基二硫代氨基甲酰氧基(DC)基团的精致结构。大分子单体的分子量可通过控制聚合过程中的单体转化率和所用引发剂浓度来调节。运用ESR技术证明了聚合反应机理。     

High conversion free-radical suspension polymerization: End groups in poly(methyl methacrylate) and their influence on the thermal stability

Suspension free-radical polymerization of vinyl monomers, carried out in the presence of alkyl mercaptans as chain-transfer agents, is analyzed. A model which accounts for the development with conversion of the polymer weight fractions having particularly tagged end groups, namely sulfur-containing and unsaturated end groups, is presented. The best current theories for diffusion-controlled polymerizations are included in the model. The sulfur content of poly(methyl methacrylate), determined as a function of conversion by a microcoulometric method, is in good agreement with the values predicted from polymerization kinetics. The rate of weight loss of the produced polymers is then related to the content of the unsaturated end groups. By comparing experimental thermal stability indexes (from thermogravimetry and isothermal heating experiments) to calculated polymer weight fractions, it is shown that the thermal stability of poly(methyl methacrylate) produced in the presence of alkyl mercaptans approximately depends on the square of the weight fraction of the polymer chains with an unsaturated end group.     

Vinyl Polymerization Initiated by the Methylated Cyclodextrin/Metal Ion System in Water

The polymerization of the vinyl monomers methyl methacrylate (MMA), benzyl methacrylate, and styrene, has been carried out using methylated cyclodextrins, for example, heptakis(2,6,0-dimethyl)-β-cyclodextrin, and heptakis (2,3,6-0-trimethyl)-β-cyclodextrin. These methylated cyclodextrins were found to initiate polymerization of the vinyl monomers in combination with water and a small amount of Cu(II) ion, in analogy with β-cyclo-dextrin (β-CD). Generally, the initiating ability of the methylated cyclodextrins/Cu(II) ion system for the polymerization of MMA was larger than that of the β-CD/Cu(II) ion system. Moreover, the introduction of a phosphate group into a methylated cyclodextrin molecule was found to increase the initiating ability for the polymerization of MMA.     

Copolymerization of 2-methylene-4-phenyl-1,3-dioxolane with electrophilic vinyl monomers through zwitterionic mechanism

Spontaneous copolymerization of cyclic ketene acetal, 2-methylene-4-phenyl-1,3-dioxolane ( I ) with common electrophilic vinyl monomers, such as methyl α-cyanoacrylate (MCA), acrylonitrile (AN), and methyl methacrylate (MMA) were investigated to further explore zwitterion polymerization method with cyclic ketene acetals. In the reaction of I with MCA and AN, spontaneous copolymerization took place at ambient temperature. The copolymers of I with MCA gave low molecular weight polymers, but copolymers obtained with I and AN were high molecular weight polymers. In the reaction of I and MMA, high molecular weight copolymer was obtained only at temperatures above 80°C. Thus, obtained polymers were not the alternating copolymers and possessed high I content in all the cases. From the above results, macrozwitterionic mechanism was suggested as discussed.     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

Alkyl halide/tertiary amine as novel initiators for free radical polymerizations of methyl methacrylate,methyl acrylate and styrene

A series of combinations of alkyl halide with tertiary amine such as ethyl α-bromophenylacetate/tris[2-(dimethylamino)ethyl)]amine (αEBP/Me₆TREN), ethyl 2-bromoisobutyrate/triethylamine (EBiB/TEA), and ethyl 2-chloropropionate/N,N,N′,N′,N′′-pentamethyldiethylenetriamine (ECP/PMDETA) have been developed as novel free radical initiators and used for the polymerizations of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St). The effects of the structure of alkyl halide and tertiary amine on the polymerization of MA were investigated. Gel permeation chromatograph (GPC) and proton nuclear magnetic resonance (¹H NMR) have been utilized to analyze the end group of the obtained poly(methyl acrylate). Electron spin resonance (ESR) spectroscopy was employed to identify the structure of the radicals produced by αEBP/Me₆TREN, and the results indicated that αEBP reacted with Me₆TREN via a single electron transfer (SET) nucleophilic mechanism to produce corresponding ethyl α-phenylacetate radicals which subsequently initiated the polymerization of MA. As both alkyl halide and tertiary amine are commercially available at low cost, non-explosive, and ease of use and storage in comparison with conventional azo, peroxide or persulfate initiators, the combination of alkyl halide and tertiary amine as a free radical initiator is promising for large-scale practical applications.