Novel synthesis of polyimide with pendant 1-phenylethyl ester using DBU and its thermal acid-catalyzed deesterification

A model reaction of o-(N-phenylcarbamoyl)benzoic acid (amic acid) with threefold amounts of 1-phenylethyl bromide (PEB) and 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU) was carried out in NMP. The reaction gave N-[m-(1-phenylethoxycarbonyl)phenyl]phthalimide in almost quantitative yield at room temperature for 2 h. Polyimide containing pendant 1-phenylethyl ester (P-1a) was also prepared from polyamic acid with PEB using DBU according to the model reaction. The obtained polymer was exactly consistent with P-1a synthesized stepwise from the esterification of the corresponding polyimide containing pendant carboxylic acid with PEB. Therefore, the reaction of polyamic acid bearing pendant carboxylic acid with alkyl bromide proceeded quantitatively to give polyimide containing pendant ester in the presence of DBU. Also, this method was applied to the synthesis of polyimide containing 1-phenylethyl ether. However, the polyimide with quantitative etherification was not synthesized. The acid-catalyzed deesterification of P-1a film was carried out by heating the irradiated polymer film containing 10 wt % of p-nitrobenzyl 9,10-diethoxyanthracene-2-sulfonate, which produced sulfonic acid by irradiation, at various temperatures. Although thermal deesterification of P-1a started at 220°C without any acid catalyst, the deesterification occurred when the irradiated film was heated at the lower temperature. The degree of esterification can be determined from the disappearance of absorption at 700 cm⁻¹. The deesterification obeyed first-order kinetics. © 1996 John Wiley & Sons, Inc.     

Syntheses and crosslinking reactions of self-curable copolymers containing pendant cyclic iminoethers and carboxylic acid groups

Soluble copolymers containing both pendant cyclic iminoethers such as 4,4-dimethyl-2-oxazoline or 4,4,6-trimethyl-4H-dihydro-1,3-oxazine and carboxylic acid were successfully synthesized by radical copolymerizations of 4,4-dimethyl-2-vinyl-2-oxazoline, 4,4-dimethyl-2-isopropenyl-2-oxazoline, or 4,4,6-trimethyl-2-vinyl-4H-dihydro-1,3-oxazine with methacrylic acid and styrene, methyl methacrylate, or ethyl acrylate using AIBN as an initiator in benzene or DMF at 60 or 80°C. The crosslinking reaction of the copolymers obtained did not occur by heating at 70°C. However, these copolymers quantitatively produced gel products by heating at 130°C. The rate of crosslinking reaction of the copolymer increased with increasing pendant cyclic iminoether and carboxylic acid groups. The rate of crosslinking was also affected by the molecular motion of the polymer chain. Our results show that the copolymers of more sterically hindered 2-vinyl-2-oxazolines are more stable and so they can be crosslinked in a controlled manner and at higher temperatures than the previously studied polyoxaziline system.     

Syntheses and polymerization of (meth)acrylates containing spiro ortho ester moieties

Acrylates and methacrylates bearing pendant spiro ortho ester groups ( 3 ) were prepared by the reaction of (meth)acrylic acid with bromomethyl spiro ortho esters ( 2 ) in the presence of 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU). These monomers were copolymerized with styrene (St) at 60°C in the presence of α,α'-azobisisobutyronitrile (AIBN) to give the corresponding copolymers with M?_n 6000-17000 and their compositions were in proportion to the feed ratios. Similarly, the copolymerization of 3 with acrylonitrile (AN) was carried out at 60°C to obtain the corresponding copolymers with the similar compositions to the feed ratios. Two kinds of 3 -St copolymers with different compositions were treated with BF₃OEt₂ in refluxing methylene dichloride affording the crosslinked polymers quantitatively. Slight expansion in volume was observed during the crosslinking.     

Novel polymers with a high carboxylic acid loading

Click chemistry has been used to prepare a range of novel polymers with pendant carboxylic acid side groups. Four azido carboxylic acids, either mono‐ or difunctional and aliphatic or aromatic, have been prepared and thoroughly characterized. Extensive model reactions with 1‐ethyl‐4‐hydroxybenzene, the simplest model for poly(4‐hydroxystyrene), and the four azido carboxylic acids have been conducted to establish the proper reaction conditions and provide an analytical frame for the corresponding polymers. Poly(4‐hydroxystyrene) moieties in three different polymers—poly(4‐hydroxystyrene), poly(4‐hydroxystyrene‐co‐methyl methacrylate), and poly(4‐hydroxystyrene‐b‐styrene)—have been quantitatively transformed into oxypropynes by the use of either Williamson or Mitsunobu strategies and subsequently reacted with the azido carboxylic acids. Detailed differential scanning calorimetry investigations of all the polymers in general exhibit [when poly(4‐hydroxystyrene) is a substantial part] significant changes in the glass‐transition temperature from the polar poly(4‐hydroxystyrene) (120–130 °C) to the much less polar alkyne polymers (46–60 °C). A direct correlation between the nature of the pendant groups in the derivatized polymers and the glass‐transition temperature has emerged: the aromatic carboxylic acids give high glass‐transition temperatures (90–120 °C), and the aliphatic carboxylic acids give lower glass‐transition temperatures (50–65 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6360–6377, 2006     

Synthesis of polymers in aqueous solutions: Esterification reaction of poly(methacrylic acid) with alkyl halides using DBU in aqueous solutions

A convenient esterification reaction of poly(methacrylic acid) (PMAA) with certain alkyl halides was performed using 1,8-diazabicyclo-[5.4.0]-7-undecene (DBU) as a base in aqueous solution or in water. The esterification reaction of PMAA with propargyl bromide (PB) proceeded very smoothly and quantitatively at 30°C to give corresponding poly(propargyl methacrylate), although the rate of the reaction decreased with increasing water. The reaction of PMAA with benzyl bromide, o-nitrobenzyl bromide, and p-nitrobenzyl bromide gave corresponding poly(methacrylic ester) using DBU under suitable reaction conditions in water. The esterification reactions of PMAA with PB were carried out using certain organic bases such as triethylamine, 4(N,N-dimethylamino)pyridine and pyridine. Inorganic bases such as sodium carbonate, sodium hydroxide, potassium carbonate, and potassium hydroxide were also tried under the same conditions as with DBU. However, the degrees of estrification with all these bases was much lower than that with DBU. © 1996 John Wiley & Sons, Inc.     

Synthesis of poly(2-cyclohexenone-4-yl methacrylate) and acidolysis of pendant protecting groups in the polymer

4-Acetoxy-2-cyclohexenone (ACH) and 2-cyclohexenone-4-yl methacrylate (CHM) were obtained from the condensation reaction of 4-bromo-2-cyclohexenone (BCH) with acetic acid and methacrylic acid using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU), respectively. Poly(2-cyclohexenone-4-yl methacrylate) ( P-1 ) containing acid-sensitive 2-cyclohexenone-4-yl group was prepared from the radical polymerization of CHM and the esterification of poly(methacrylic acid) with BCH using DBU. Furthermore, P-1 and CHM copolymers ( P-2 and P-3 ) were easily synthesized from the radical polymerization of methacrylic acid and comonomers in dimethylsulfoxide using 1 mol % of 2,2′-azobis (isobutyronitrile) followed by esterification of the resulting polymers with BCH using DBU by one-pot method. The deprotection reaction of ACH and P-1 was carried out in dichloromethane using an acid catalyst. The reaction proceeded smoothly in solution to give phenol and the corresponding carboxylic acid. Therefore, the 2-cyclohexenone-4-yl group is a useful protecting group for carboxylic acids, because the protection and deprotection reactions are very easy. In the case of polymer films, however, the acid was trapped by carbonyl group on the 2-cyclohexenone-4-yl group, and did not cause the deprotection reaction. © 1993 John Wiley & Sons, Inc.     

Synthesis and photochemical properties of novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups

Novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups were synthesized by the one‐pot method for the reaction of poly(methacrylic acid) with epibromohydrin; this was followed by a reaction with phenacylbromide with 1,8‐diazabicyclo‐[5.4.0]undecene‐7 as a condensation reagent. These esterification reactions proceeded smoothly and quantitatively under mild conditions. Moreover, the photochemical reactions of the resulting polymers were evaluated by UV and IR spectroscopy. The pendant phenacyl ester groups were photocleaved to give corresponding carboxyl groups, and then the produced carboxyl groups reacted with pendant epoxy groups. Furthermore, the baking process promoted a crosslinking reaction because of the addition reaction of epoxy groups with carboxyl groups after irradiation. It was also proven that the photochemical reactivity of the resulting polymers was affected by the structure of the phenacyl ester group. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 530–538, 2001     

Metal-free synthesis of aryl esters from carboxylic acids and diaryliodonium salts

An efficient arylation of carboxylic acids with diaryliodonium salts has been developed, giving aryl esters in high yields within short reaction times for both aromatic and aliphatic substrates. The transition-metal-free conditions are compatible with a range of functional groups, and good chemoselectivity is observed with unsymmetric diaryliodonium salts. Furthermore, steric hindrance in the ortho positions is well tolerated both in the carboxylic acid and in the diaryliodonium salt, yielding aryl esters that cannot be obtained via other esterification protocols.     

Esterification of Carboxylic Acids and Diacids by Trialkyl Borate under Solvent- and Catalyst-Free Conditions

Esterification or transesterification reactions are usually carried out in the presence of homogeneous or heterogeneous catalysts. However, recently a new method was reported for the esterification of carboxylic acids by tributyl borate under solvent- and catalyst-free conditions. In order to show the synthetic ability of trialkyl borate esters in the esterification reactions, here, the esterification of other carboxylic acids and diacids by tributyl-, triisoamyl-, and tribenzyl borate under the same conditions were reported. Some of the prepared ester and diester products have found wide applications as plasticizers and synthetic ester base lubricants. The esterification reactions have been cleanly carried out in the absence of any solvent under catalyst-free conditions. The maximum rate belongs to isoamyl trichloroacetate （VIb） which reached about 76% within about 6.5 h. On the basis of obtained findings, it seems that electron withdrawing groups on carboxylic acid facilitate the esterification reaction.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Synthesis and photochemical property of polymers with pendant donor–acceptor-type norbornadiene moieties

The donor–acceptor-type norbornadiene (D–A NBD) 1,4,5,6-tetramethyl-3-phenyl-2,5-NBD-2-carboxylic acid was prepared by the Diels–Alder reaction of methyl 3-phenylprop-2-ynoate with 1,2,3,4-tetramethyl-1,3-cyclopentadiene. 1,4,5,6,7-Pentamethyl-3-phenyl-2,5-NBD-2-carboxylic acid was also synthesized in the same way. Styrene-type polymers with pendant D–A NBD moieties were prepared with a 100% degree of substitution (DS) by the reaction of D–A NBD carboxylic acids with poly[(p-chloromethyl)styrene] with 1,8-diazabicyclo[5.4.0]undecene-7 in dimethyl sulfoxide at 70 °C for 6 h. In the reaction of D–A NBD carboxylic acids with poly(2-chloroethyl vinyl ether), the DSs were about 60%. The photochemical valence isomerizations of all the NBD polymers proceeded smoothly with UV irradiation in tetrahydrofuran solutions and in the film state. In addition, the rate of the photochemical reaction of the NBD polymers increased efficiently by the addition of 4,4′-bis(diethylamino)benzophenone as a photosensitizer in a film state. The stored thermal energy of the irradiated polymers was also evaluated by differential scanning calorimetry to be 55–74 kJ/mol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1764–1773, 2001     

Highly Efficient Esterification of an Equimolar Amount of Carboxylic Acids and Alcohols Catalyzed by ZrOCl_2·8H_2O

Esterification of carboxylic acids with alcohols is one of the most fundamental and useful transformations in organic synthesis. The most common catalysts are H2SO4 and TsOH. However, H2SO4 or TsOH-catalyzed esterification procedure has some problems such as corrosion, side reactions, difficulty in separation. Hence, recently, various solid acid catalysts such as ion-exchanged resins, molecular sieve, and heteropoly acids etc. have been employed for esterification reaction. However, the s…     

Bulky diarylammonium arenesulfonates as mild and extremely active dehydrative ester condensation catalysts

More environmentally benign alternatives to current chemical processes, especially large-scale, fundamental reactions like ester condensations, are highly desirable for many reactions. Bulky diarylammonium pentafluorobenzenesulfonates and tosylates serve as extremely active dehydration catalysts for the ester condensation reaction of carboxylic acids with equimolar amounts of sterically demanding alcohols and acid-sensitive alcohols. Typically, the esterification reaction is performed in heptane by heating at 80 °C in the presence of 1 mol% of the catalyst without removing water. Esterification with primary alcohols proceeds without solvents even at room temperature. Furthermore, 4-(N-mesitylamino)polystyrene resin-bound pentafluorobenzenesulfonate can be recycled more than 10 times without a loss of activity.     

Synthesis and thermal dissociation of polymers having hemiacetal ester moieties

Polymers having hemiacetal ester moieties in the side chain were synthesized and their thermal dissociation was examined. 1‐Alkoxyethyl methacrylates (1) were synthesized from methacrylic acid with alkyl vinyl ethers and their radical copolymerizations with butyl methacrylate were carried out at 80°C for 6.5 h using AIBN as an initiator to afford the corresponding copolymers having the hemiacetal ester moieties in the side chain. The hemiacetal ester moieties in the copolymers thermally converted to carboxyl groups with elimination of the corresponding vinyl ethers. The thermal dissociation of the hemiacetal ester moieties in the side chain obeyed first‐order kinetics at 140°C, and their reactivities were in the following order: 1‐(tert‐butoxy)ethyl > 1‐isopropoxyethyl > 1‐ethoxyethyl > 1‐butoxyethyl ester. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 609–614, 1999     

Highly selective enzymatic kinetic resolution of primary amines at 80 degrees C: a comparative study of carboxylic acids and their ethyl esters as acyl donors

Optimization of the kinetic resolution of 2-amino-4-phenyl-butane was achieved at 80 degrees C using CAL-B-catalyzed aminolysis of carboxylic acids and their ethyl esters. The reactions carried out with long chain esters and the corresponding acids as acyl donors proceeded with remarkably high enantioselectivity. The use of carboxylic acids as acylating agents led to a marked acceleration of the reaction rate compared to their ester counterparts. Lauric acid led to enantiomeric excesses superior to 99.5% for both the remaining amine and the corresponding lauramide at 50% conversion (reached in 3 h). These optimized conditions were applied to the resolution of a series of aliphatic and benzylic amines.     

Graft copolymerization induced by thermal reactions of the binary alkali salts of poly(carboxylic acid)–brominated carboxylic acid in bulk

Thermal reactions of the binary alkali salts of poly(carboxylic acid)–brominated carboxylic acid such as sodium or potassium poly(4-vinylbenzoate)-2-bromopropanoate [Na or K (PVBA-2-BPA)] in bulk were investigated. A methanol solution of binary acids was prepared by fixing the molar ratio of the repeating unit of polymeric acid to the fraction of brominated carboxylic acid. The binary salts were prepared by the neutralization of the binary acid solution. The product of the thermal reaction followed by esterification was identified as a graft copolymer containing PVBA in the main chain and polylactic acid in the side chain. The reaction of 1/15 K (PVBA-2-BPA) at 120 °C for 2 h yielded the highest percentage of grafting (300%). The grafting proceeded gradually for the initial 2 h and then somewhat. Reactivity of the K salt was higher than that of the corresponding Na salt. The thermal reaction of 1/10 K [polymethacrylate-2-BPA (PMA-2-BPA)] at 120 °C for 2 h also yielded a graft copolymer, and the percentage of grafting was 300%. However, reaction temperatures higher than 120 °C caused homopolycondensation of K 2-BPA prior to grafting, and homopolycondensation occurred prior to grafting in the reaction with Na (PMA-2-BPA). © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1877–1885, 2001     

Synthesis and characterization of poly(ester-sulfone)s

Aliphatic and aromatic-aliphatic poly(ester-sulfone)s were synthesized by the transesterifications of diphenyl adipate and diphenyl phthalates (ortho, meta, para) with two sulfonecontaining diols, 1,3-bis (3-hydroxypropylsulfonyl) propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl) butane (Diol-343). Based on DSC and WAXD studies, the aliphatic homopoly(ester-sulfone)s are semicrystalline at room temperature and liquid crystalline at elevated temperature, while their copolymers with alkanediols are liquid crystalline. The liquid crystalline phase formation in aliphatic poly(ester-sulfone)s is attributed to the strong dipole-dipole interactions between sulfone groups. The aromatic-aliphatic poly(estersulfone)s from diphenyl phthalate (ortho) and isophthalate (meta) are amorphous. They are soluble in trifluoroacetic acid and m-cresol at room temperature, and DMF, DMAC, and DMSO at elevated temperature. The aromatic-aliphatic poly(ester-sulfone)s from diphenyl terephthalate are semicrystalline and are soluble only in trifluoroacetic acid. For a given diol, the glass transition temperatures of aromatic-aliphatic poly(ester-sulfone)s increase from phthalate to isophthalate to terephthalate. This is because the flexibility of the benzene ring in the polymer backbone decreases from ortho to meta to para substitution. As a comparison, polyesters without sulfone groups were synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and the diphenyl esters. The poly(ester-sulfone)s have glass transition temperatures 60–80°C higher than the corresponding polyesters without sulfone groups, due to the strong dipolar interactions between sulfone groups. © 1994 John Wiley & Sons, Inc.     

Alkylation of Carboxylate Salts of Acidic Herbicides for Gas Chromatographic Analysis

Abstract

The methyl esters of 2-methoxy-3, 6-dichlorobenzoic acid and three phenoxyacetic acids were prepared by the admixture of an excess of both methyl iodide and anhydrous alkali-metal carbonate to a solution of the carboxylic acids in acetone. The reaction was completed within the shortest period of time when cesium carbonate was used, and the reaction mixture was injected without further work-up into a gas chromatograph fitted with a flame ionization detector. Further reduction of reaction time was achieved by heating the mixture to 50°C and by ultrasonic treatment; this technique is also suitable for esterification of microliter quantities and obviates the need for a microrefluxer. Butylesters of 2, 4-D and 2, 4, 5-T were prepared in an analogous manner. The methyl esters of 2, 4-D and 2, 4, 5-T, and the butyl ester of 2, 4-D were obtained in better than 90% yield.     

Addition reactions of pendant epoxide group in poly(glycidyl methacrylate) with various active esters

Addition reactions of pendant epoxide groups in poly(glycidyl methacrylate) (PGMA) with various active esters such as 1-benzotriazolyl benzoate, S-(2-benzoxazolyl) thiobenzoate, S-(2-benzothiazolyl) thiobenzoate, 4-nitrophenyl benzoate (4NPB), and S-phenyl thiobenzoate (PTB) were carried out using quaternary salts as catalysts. The reactions of PGMA with those active esters proceeded in diglyme at 100°C for 24 h quantitatively without the formation of 2-hydroxyl pendant groups in the polymer when 10 mol % of tetraethylammonium bromide was used as a catalyst. Furthermore, it was found that the respective quaternary salts have higher catalytic activity than tertiary amines in the reaction of PGMA with the active esters, and the reaction of PGMA with 4NPB gave the corresponding polymer with the highest conversion by addition of tetrabutylammonium bromide as a catalyst, while tetraethylammonium chloride showed the highest activity for the reaction of PGMA with PTB. In addition, the rate of reaction of PGMA with 4NPB was proportional to third order kinetics of the epoxide concentration, the ester concentration and the catalyst concentration as follows: ?d[Epoxide]/dt = ?[Ester]/dt = k₃[Epoxide] [Ester] [Catalyst].     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996