Amphiphilic copolymers with increased affinity for substrates

The copolymers of methyl quaternized 2-dimethylaminoethyl acrylate and styrene, 2-vinyl naphthalene, acrylic acid iso-octyl ester, or acrylic acid n-butyl ester have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants and the thermodynamic parameters in the course of the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. In addition, the fluorescence spectra of monomer and excimer emissions of the polymers with aromatic residues were measured. The excimer/monomer fluorescence intensity ratio was studied in the presence of various additives such as methyl orange, urea, methanol, and NaCl to gain an insight into the nature of microdomains in the polymer. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed. © 1993 John Wiley & Sons, Inc.     

Binding methyl orange and hydrophobic fluorescent probes by poly(2-dimethylaminoethyl methacrylate) and copolymers of 2-dimethylaminoethyl methacrylate and N-vinyl-2-pyrrolidone: pH dependence of the binding and fluorescence intensity

The pH dependence of the interaction of poly(2-dimethylaminoethyl methacrylate) and copolymers of 2-dimethylaminoethyl methacrylate and N-vinyl-2-pyrrolidone with methyl orange, 2-p-toluidinylnaphthalene-6-sulfonate (TNS), and 1,6-diphenyl-1,3,5-hexatriene (DHT) was studied by equilibrium dialysis and fluorescence measurements at pH's 7–10. The first binding constant accompanying the binding of methyl orange and TNS by the polymers, in particular the homopolymer, shows a maximum around pH 8 and maximal fluorescence intensity of TNS is obtained around pH 8.5 in the presence of the polymers. To elucidate these observations the pH-induced conformational changes of the homopolymer were examined by potentiometric titration and viscosity measurements and the thermodynamic parameters that accompany the binding were calculated. The polymer was found to change from an extended coil at lower pH to a compact coil at higher pH. The electrostatic attraction between the sulfonate group of the small molecule and the protonated nitrogen atoms on the polymer is increased at lower pH and the hydrophobic interaction between the hydrophobic moieties of the polymer and the small molecule is enhanced at higher pH. The results obtained for the dye binding and fluorescence intensity were discussed in terms of the electrostatic and hydrophobic interactions.     

Exploration of Novel Pyrene Labeled Amphiphilic Block Copolymers: Synthesis Via ATRP,Characterization and Properties

A novel initiator containing pyrene, a fluorescent moiety, was prepared by reacting 1-aminopyrene and 2-bromoisobutyl bromide. The structure elucidation of the new initiator was carried out using various spectroscopic tools, as well as through single crystal X-ray diffraction studies. Novel, fluorescent amphiphilic block copolymers with a pyrene end-group, poly(styrene-b-acrylic acid) [P(S-b-AA)], poly(methyl methacrylate-b-dimethylaminoethyl methacrylate) [P(MMA-b-DMAEMA)], poly(styrene-b-tert-butyl acrylate) [P(S-b?t-BA)], poly(styrene-b-dimethylaminoethyl methacrylate) [P(S-b-DMAEMA)] were successfully synthesized by the atom transfer radical polymerization (ATRP) method, using CuBr as the catalyst and N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/N,N,N′,N″,N″-hexamethyltriethylenetetramine (HMTETA) as the complexing agent. The polymers were characterized by GPC, ¹H-NMR, IR and UV-Vis spectroscopies. It was observed that as the polymerization time increased, both the conversion and the molecular weight increased linearly with time. The fluorescence properties of the polymers prepared were recorded. The physical properties and especially the pH dependent swelling properties of the amphiphilic block copolymers have been investigated. The utility of the block copolymers in the formation of stable dispersion of cadmium sulphide nanoparticles was investigated as a model study.     

Binding the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate,by polycations that contain apolar pendant groups: Equilibrium dialysis and fluorescence measurements

The thermodynamic parameters for the interaction of the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate (TNS), and polycations that contain a piperidinium cation and various nonpolar pendant groups were calculated. Binding is exothermic and involves a positive entropy gain. The contribution of the entropy term to the free energy change tends to increase with increasing hydrophobicity of the polymers. The intensity of the fluorescence of TNS is enhanced when the probe binds to the polycations. The nature and phenomena of hydrophobic fluorescent probe binding with the polymers are discussed.     

Peculiar temperature dependence of the binding of methyl orange and its homologs by 2-diethylaminoethyl methacrylate-N-vinyl-2-pyrrolidone copolymers

2-Diethylaminoethyl methacrylate (DEAEMA)–N-vinyl-2-pyrrolidone (VPy) copolymers of various compositions have been synthesized. The resultant copolymers were examined for their ability to bind methyl orange and its homologs, in particular butyl orange, at 5, 15, 25, and 35°C in aqueous solutions. The amount of binding of butyl orange is much higher with the copolymers than with polyvinylpyrrolidone or with 2-hydroxyethyl methacrylate–N-vinyl-2-pyrrolidone copolymers. Introduction of only 3% of the hydrophobic DEAEMA residue increases markedly the binding affinity toward the cosolute. Maximal binding is obtained at 15°C in the temperature range measured. This peculiar temperature dependence of the extent of binding is explicable on the basis of hydrophobic effects involved in this binding. The peculiar temperature dependence disappeared in aqueous solution of NaSCN which acts as a water-structure breaker: the extent of binding changes regularly with temperature. This is interpretable only in terms of reduction of hydrophobic contribution to the binding. With propyl orange, which is a less hydrophobic cosolute than butyl orange, the peculiarity of the binding was not detected.     

Copolymers of 2-deoxy-2-methylacrylamido-<Emphasis Type="Italic">D</Emphasis>-glucose with tertiary and quaternary amino groups

Method for synthesis of graft-copolymers of a vinyl saccharide, 2-deoxy-2-methylacrylamido-D-glucose, and N,N-dimethylaminoethyl methacrylate was developed. Statistical copolymers with a controllable hydrophobic-hydrophilic balance were synthesized by alkylation of a statistical copolymer with various alkyl iodides.     

Binding of butyl orange by poly(2-dimethylaminoethyl methacrylate) and copolymers of 2-dimethylaminoethyl methacrylate and N-vinyl-2-pyrrolidone: Peculiar temperature dependence of the binding

The temperature dependence of the binding of butyl orange by a homopolymer of 2-dimethylaminoethyl methacrylate (DMAEMA) and copolymers of DMAEMA and N-vinyl-2-pyrrolidone (VPy) has been examined at various pH's. The binding is very much dependent upon the temperature of the system, the pH of the binding medium, and the DMAEMA content in the polymer. In this case maximal binding is obtained at approximately 15–25° in the temperature range measured, although in most cases which have been examined, the degree of binding increases steadily with increasing temperature. This peculiar temperature dependence of the binding becomes more pronounced as the pH and the DMAEMA content are increased. The appearance of the peculiarity is discussed in terms of the pH-induced conformational changes of the polymer and the hydrophobicity of the polymer.     

Synthesis of Amphiphilic ABCBA-Type Pentablock Copolymer from Consecutive ATRPs and Self-Assembly in Aqueous Solution

Summary: A novel amphiphilic ABCBA-type pentablock copolymer with properties that are sensitive to temperature and pH, poly(2-dimethylaminoethyl methacrylate)-block-poly(2,2,2-trifluoroethyl methacrylate)-block-poly(ε-caprolactone)-block-poly(2,2,2- trifluoroethyl methacrylate)-block-poly(2-dimethylaminoethyl methacrylate) (PDMAEMA- b-PTFEMA-b-PCL-b-PTFEMA-b-PDMAEMA), was synthesized via consecutive atom transfer radical polymerizations (ATRPs). The copolymers obtained were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy, respectively. The aggregation behaviors of the pentablock copolymers in aqueous solution with different pH (pH = 4.0, 7.0 and 8.5) were studied. Transmission electron microscopic images revealed that spherical micelles from self-assembly of the pentablock copolymer were prevalent in all cases. The mean diameters of these micelles increased from 34, 46, to 119 nm when the pH of the aqueous solution decreased from 8.5, 7.0, to 4.0, respectively.     

The Role of Hydrophobicity in the Antimicrobial and Hemolytic Activities of Polymethacrylate Derivatives

We synthesized cationic random amphiphilic copolymers by radical copolymerization of methacrylate monomers with cationic or hydrophobic groups and evaluated their antimicrobial and hemolytic activities. The nature of the hydrophobic groups, and polymer composition and length were systematically varied to investigate how structural parameters affect polymer activity. This allowed us to obtain the optimal composition of polymers suitable to act as non-toxic antimicrobials as well as non-selective polymeric biocides. The antimicrobial activity depends sigmoidally on the mole fraction of hydrophobic groups (f_HB). The hemolytic activity increases as f_HB increases and levels off at high values of f_HB, especially for the high-molecular-weight polymers. Plots of HC₅₀ values versus the number of hydrophobic side chains in a polymer chain for each polymer series showed a good correlation and linear relationship in the log–log plots. We also developed a theoretical model to analyze the hemolytic activity of polymers and demonstrated that the hemolytic activity can be described as a balance of membrane binding of polymers through partitioning of hydrophobic side chains into lipid layers and the hydrophobic collapsing of polymer chains. The study on the membrane binding of dye-labeled polymers to large, unilamellar vesicles showed that the hydrophobicity of polymers enhances their binding to lipid bilayers and induces collapse of the polymer chain in solution, reducing the apparent affinity of polymers for the membranes.     

Thermoresponsive terpolymers based on methacrylate monomers: Effect of architecture and composition

A series of amphiphilic thermoresponsive copolymers was synthesized by group transfer polymerization. Seven copolymers were prepared based on the nonionic hydrophobic n‐butyl methacrylate (BuMA), the ionizable hydrophilic and thermoresponsive 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic poly(ethylene glycol)methyl methacrylate (PEGMA). In particular, one diblock copolymer and six tricomponent copolymers of different architectures and compositions, one random and five triblock copolymers, were synthesized. The polymers and their precursors were characterized in terms of their molecular weight and composition using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy, respectively. Aqueous solutions of the polymers were studied by turbidimetry, hydrogen ion titration, and light scattering to determine their cloud points, pK_as, and hydrodynamic diameters and investigate the effect of the polymers' composition and architecture. The thermoresponsive behavior of the copolymers was also studied. By increasing the temperature, all polymer solutions became more viscous, but only one polymer, the one with the highest content of the hydrophobic BuMA, formed a stable physical gel. Interestingly, the thermoresponsive behavior of these triblock copolymers was affected not only by the terpolymers' composition but also by the terpolymers' architecture. These findings can facilitate the design and engineering of injectable copolymers for tissue engineering that could enable the in situ formation of physical gels at body temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 775–783, 2010     

Conformational and dynamic characteristics of copolymers of N,N-dimethylaminoethyl methacrylate and 2-deoxy-2-methacrylamido-D-glucose

The conformational and relaxation properties of N,N-dimethylaminoethyl methacrylate and 2-deoxy-2-methacrylamido-D-glucose copolymers in solutions are studied by the methods of molecular hydrodynamics (sedimentation, diffusion, viscometry), polarized luminescence, and flow birefringence. Kuhn-Mark-Houwink equations are obtained, and Kuhn statistical segment lengths at various degrees of protonation of amino groups are estimated. It is found that there is a correlation between the Kuhn statistical segment length and the intramolecular mobility of the copolymers.     

New Segmented Copolymers by Combination of Atom Transfer Radical Polymerization and Ring Opening Polymerization

Atom transfer radical polymerization (ATRP) and ring opening polymerization (ROP) were combined to synthesize various polymers with various structures and composition. Poly(ε-caprolactone)-b-poly(n-octadecyl methacrylate), PCL-PODMA, was prepared using both sequential and simultaneous polymerization methods. Kinetic studies on the simultaneous process were performed to adjust the rate of both polymerizations. The influence of tin(II) 2-ethylhexanoate on ATRP was investigated, which led to development of new initiation methods for ATRP, i.e., activators (re)generated by electron transfer (AGET and ARGET). Additionally, block copolymers with two crystalizable blocks, poly(ε-caprolactone)-b-poly(n-butyl acrylate)-b-poly(n-octadecyl methacrylate), PCL-PBA-PODMA, block copolymers for potential surfactant applications poly(ε-caprolactone)-b-poly(n-octadecyl methacrylate-co-dimethylaminoethyl methacrylate), PCL-P(ODMA-co-DMAEMA), and a macromolecular brush, poly(hydroxyethyl methacrylate)-graft-poly(ε-caprolactone), PHEMA-graft-PCL, were prepared using combination of ATRP and ROP.     

Peculiar temperature dependence on the binding of methyl orange and its homologs by 2-hydroxyethyl methacrylate-N-vinyl-2-pyrrolidone copolymers

2-Hydroxyethyl methacrylate (HEMA)-N-vinyl-2-pyrrolidone (VPy) copolymers of various compositions have been prepared. The copolymers obtained were examined for their ability to bind a homologous series of methyl orange derivatives, methyl orange, ethyl orange, propyl orange, and butyl orange, at 5, 15, 25, and 35°C, respectively, in an aqueous solution. The first binding constants and the thermodynamic parameters that accompanied the binding were evaluated. The binding ability of the copolymer for the small cosolute was enhanced with an increase of the HEMA content in the copolymer. Moreover, a bell-shaped curve appeared in the binding of butyl orange by the copolymers having higher HEMA residues when the first binding constant was plotted as a function of temperature, whereas no such phenomenon was detected for the copolymers with less HEMA content or for the less hydrophobic dye, methyl orange, ethyl orange, or propyl orange. This peculiar temperature dependence of the first binding constant shows that the enthalpy of the binding varies from a positive (unfavorable) value below ca. 15°C to a negative (favorable) one above this temperature. This behavior can be accounted for in terms of more hydrophobic effects involved in the binding process.     

Functional polymethacrylates as bacteriostatic polymers

Two copolymers, P(PCEMA-co-MMA) and P(t-BMA-block-PCEMA), were prepared via ATRP using 2-(phenoxycarbonyloxy)ethyl methacrylate (PCEMA) as reactive monomer and methyl methacrylate (MMA) or tert-butyl methacrylate (t-BMA) as co-monomers. Alternatively phenoxycarbonyloxy decorated polymethacrylates were obtained via polymer analogous reaction: P(HEMA) was reacted with phenyl chloroformate to yield P(PCEMA). The highly reactive phenoxycarbonyloxy groups were used for polymer analogous reactions with nucleophiles to obtain polymers with ionic/hydrophilic and hydrophobic side groups. Different amines with long alkyl chains or tertiary amine groups were reacted with phenoxycarbonyloxy decorated polymers and subsequently reacted with methyl iodide to obtain amphipathic polymers with bacteriostatic properties.     

pH-thermosensitive behavior of N,N-dimethylaminoethyl methacrylate (Co)polymers with N-vinylcaprolactam

The effect of acidity of a medium on the phase separation temperature and the intensity of light scattering for dispersions produced by heating of aqueous solutions of N,N-dimethylaminoethyl methacrylate, N-vinylcaprolactam, and their copolymers has been studied. It has been demonstrated that the phase separation temperature and the turbidity of polyvinylcaprolactam (and vinylcaprolactam-enriched copolymers) solutions are pH-independent. Poly(N,N-dimethylaminoethyl methacrylate) (and N,N-dimethylaminoethyl methacrylateenriched copolymers) exhibits temperature sensitivity only in the alkaline region, and the phase separation temperature and turbidity versus pH plots are described by curves with maxima. The addition of sodium dodecyl sulfate to polymer solutions in the general case causes an increase in the phase separation temperature. However, if positive charges occur on macromolecules (in initial solutions of poly(N,N-dimethylaminoethyl methacrylate) or acidified solutions of polyvinylcaprolactam), the increase in the phase separation temperature is preceded by its decrease owing to the electrostatic interaction of surfactant anions with cationic centers. As acid is introduced into the H₂O-sodium dodecyl sulfate-polyvinylcaprolactam ternary system, the phase separation temperature of the polyvinylcaprolactam-dodecyl sulfate complex is decreased.     

Copolymers of 2-hydroxyethyl methacrylate and alkyl methacrylates. I. Synthesis and characterization

Copolymerization of 2-hydroxyethyl methacrylate (HEMA) with ethyl methacrylate (EMA) and n-butyl methacrylate (BMA) was carried out in bulk at 70°C ± 1°C using 0.2% benzoyl peroxide as initiator in nitrogen atmosphere. Number average molecular weight (M _n) of the copolymers was determined by dynamic osmometry. Intrinsic viscosity [η] of HEMA-BMA copolymers was evaluated at 35°C in dimethyl formamide. These copolymers were also characterized by infrared spectroscopy and density measurements. Cohesive energy densities (CED) of these polymers were determined by observing their swelling behavior in different solvents. It was found that a decrease in alkyl methacrylate content resulted in an increase in the CED values of the copolymers.     

Influence of alkyl chain length and molecular weight on the surface functionalization via adsorption/entrapment with biocidal cationic block copolymers

Polysulfone (PSf) films were functionalized with block copolymers containing poly(n-butyl acrylate) (PBA) as anchor block which is able to firmly tether the biocidal quaternized poly(2-dimethylaminoethyl methacrylate) (PDMAEMAq) to the surface. Block copolymers were synthesized using sequential atom transfer radical polymerization (ATRP) and quaternization with methyl and/or octyl groups rendered the polymers biocidal. Upon reversible swelling of the PSf surface layer in the adsorption/entrapment process, incorporation of the block copolymer is anticipated to be stable; homopolymers, i.e., methyl- or octyl-quaternized PDMAEMAq, were investigated for comparison. The addition of salt to the functionalization solution containing the block copolymer induced a decrease in the critical micelle concentration and lead to higher functionalization efficiency. The impact of intra- or interchain interactions in these aggregates on adsorption and firm entrapment in PSf was determined by measuring contact angle, charge density and zeta potential.     

Linear polymers of allyl acrylate and allyl methacrylate

Allyl acrylate and allyl methacrylate were polymerized by anionic initiators to soluble linear polymers containing allyl groups in the pendant side chains. The pendant unpolymerized allyl groups of the resulting linear poly(allyl acrylates) were shown to be present by: (1) the disappearance of the acrylyl and methacrylyl double bond absorptions in the infrared spectra in the conversions of monomers to polymers; (2) postbromination of the allyl bonds in the linear polymer; (3) the disappearance of the allyl groups absorptions in the infrared spectra of the brominated linear polymers; and (4) the thermal- and radical-initiated crosslinking of the linear polymers through the allyl groups. Allyl acrylate and allyl methacrylate show great reluctance to copolymerize with styrene under anionic initiation, but copolymerize readily with methyl methacrylate and acrylonitrile. Block copolymers were prepared by reacting allyl methacrylate with preformed polystyrene and poly(methyl methacrylate) anions. The linear polymers and copolymers of allyl acrylate may be classified as “self-reactive” polymers which yield thermosetting polymers. Bromination of the linear polymers offers a convenient method of producing self-extinguishing polymers.     

Synthesis of amphiphilic diblock copolymers poly[2-(<Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-dimethylamino)ethyl methacrylate]-<Emphasis Type="Italic">b</Emphasis>-poly(stearyl methacrylate) and their self-assembly in mixed solvent

Amphiphilic diblock copolymers consisting of 2-(N, N-dimethylamino)ethyl methacrylate (DMAEMA, abbreviated as DMA) and stearyl methacrylate (SMA) with different degrees of polymerization and compositions were prepared by reversible addition–fragmentation chain transfer (RAFT) copolymerization. The composition and chemical structures of (co)polymers were confirmed by the measurements of ¹H NMR spectroscopy and gel permeation chromatography (GPC). The self-aggregating structures of amphiphilic diblock copolymers with the concentration of 0.1~0.3 wt.% in THF/water mixed solvent was investigated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). It was found that both the morphologies and aggregating particle size resulted from the amphiphilic diblock copolymers depended on the variation of pH values, the lengths of the hydrophobic PSMA chains, and the weight ratio of THF/water mixed solvent.     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001