Alternating copolymerization of styrene and methyl α-chloroacrylate with diethylaluminum chloride

The alternating copolymerization of styrene and methyl α-chloroacrylate (MCA) with diethylaluminum chloride (Et₂AlCl) in benzene at 0°C has been investigated. The copolymer has an equimolar composition irrespective of the feed monomer composition, the copolymer yield and the amount of Et₂AlCl used. The copolymerization proceeds first very rapidly and then rather slowly after attaining a certain yield which varies proportionally to the amount of Et₂AlCl used. A maximum copolymer yield is observed at about 60% MCA feed composition. The ¹H-NMR analyses of dyad, triad, and pentad of the alternating deuterated α-d-St-MCA copolymer indicate that the configuration of this copolymer can be explained by a single parameter, coisotacticity σ(σ = 0.69). A favorable mechanism of the alternating propagation as well as of the stereoregularity control is discussed.     

Polymerization of vinyl monomers initiated by organoaluminium compounds/benzoyl peroxide systems

The free-radical polymerization of methyl methacrylate (MMA) initiated by systems comprizing benzoyl peroxide (BPO) and different organoaluminium compounds (OACs) has been studied. The influence of the type of OAC, concentration of components of the initiation system, temperature, and time on the reaction yield have been determined. Systems containing BPO and diethylaluminium chloride (Et₂AlCl) have been found to enable us to obtain, in high yields at room temperature, of homopolymers of MMA, methyl acrylate, acrylonitrile (AN), vinyl acetate, and the alternating AN/styrene (St) copolymer; they are, however, not very active in the homopolymerization of St and vinyl chloride. Factors affecting the polymerization yield have been discussed in terms of the mechanism of the reaction between BPO and OACs, reactivity of alkyl radicals formed in these systems, and catalytic effect of OAC in the propagation step.     

Copolymerization of Chloroprene with Methyl Methacrylate by the EtnAICI3.n (n=1, 1.5, 2)-Vanadium Compound System

Abstract

The copolymerization of chloroprene with methyl methacrylate was studied in the presence of Et_n A1C1_3-n (n=1, 1.5, 2)-vanadium compounds. Monomer reactivity ratios in various catalyst concentrations were compared with that of a usual radical initiator. The apparent monomer reactivity ratio changed with the concentration of alkylaluminum halide. In this polymerization, alternating copolymer could not be prepared by the ordinary catalyst concentration by which the alternating copolymerization of chloroprene with acrylonitrile was carried out. The addition of more than 10 mole % of the alkylaluminum halide based on two monomers was required to prepare the copolymer which had equimolar composition irrespective of the feed monomer ratio.

The configuration in the repeating unit of the copolymer was discussed by comparison with the NMR and IR spectra of the radical copolymer and the cyclic Diels-Alder adduct of chloroprene-methyl methacrylate. The high alternating tendency was clarified by ozonolysis of the copolymer which was prepared under the conditions which produced equimolar copolymer in various feed monomer ratios. The chloroprene unit of the copolymer was present in the 1, 4-trans structure in the copolymer prepared by the Et_n A1C1_3-n -vanadium compound system.     

Alternating copolymerization of 1- and 2-vinylnaphthalene with methyl methacrylate by using diethylaluminum chloride

The alternating copolymerization of 1- and 2-vinylnaphthalene (1-VNap and 2-VNap) with methyl methacrylate (MMA) by using diethylaluminum chloride (Et₂AlCl) in toluene at 0°C has been studied. No polymerization could occur without Et₂AlCl, and alternating copolymers were obtained only when an equimolar amount of Et₂AlCl with MMA was supplied. Through ¹H-NMR analyses on both dyad and triad of alternating deuterated 1- and 2-α-d-VNap–MMA copolymers, each configuration could be described successfully by a single parameter, coisotacticity σ, whose value was estimated as 0.41 for the former and 0.56 for the latter copolymer, respectively. A rather low coisotacticity of copoly(1-VNap–MMA) was explained in the terms of steric effect (peri effect) of 1-VNap monomer.     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Radiation-induced copolymerization of tetrafluoroethylene with vinyl ethers

Radiation-induced copolymerization of tetrafluoroethylene with various vinyl ethers has been studied. It was found that tetrafluoroethylene can be copolymerized with vinyl ethers to give alternating copolymers over a wide range of the initial monomer concentration in the monomer mixture. The monomer reactivity ratios were determined for the copolymerization of tetrafluoroethylene with n-butyl vinyl ether as 0.005 (r_TFE) and 0.0015 (r_NBVE). The rate of copolymerization is extremely high and has a maximum at an equimolar concentration of two monomers. The alternating structure of the copolymers was confirmed by the analysis of NMR spectra. Some thermal properties of the copolymers were measured by DSC and DTA.     

Controlled radical copolymerization of β‐pinene and acrylonitrile

The feasibility of the radical copolymerization of β‐pinene and acrylonitrile was clarified for the first time. The monomer reactivity ratios evaluated by the Fineman–Ross method were r_β‐pinene = 0 and r_{acrylonitrile} = 0.66 in dichloroethane at 60 °C with AIBN, which indicated that the copolymerization was a simple alternating copolymerization. The addition of the Lewis acid Et₂AlCl increased the copolymerization rate and enhanced the incorporation of β‐pinene. The first example for the synthesis of an almost perfectly alternating copolymer of β‐pinene and acrylonitrile was achieved in the presence of Et₂AlCl. Furthermore, the possible controlled copolymerization of β‐pinene and acrylonitrile was then attempted via the reversible addition–fragmentation transfer (RAFT) technique. At a low β‐pinene/acrylonitrile feed ratio of 10/90 or 25/75, the copolymerization with 2‐cyanopropyl‐2‐yl dithiobenzoate as the transfer agent displayed the typical features of living polymerization. However, the living character could be observed only within certain monomer conversions. At higher monomer conversions, the copolymerizations deviated from the living behavior, probably because of the competitive degradative chain transfer of β‐pinene. The β‐pinene/acrylonitrile copolymers with a high alternation degree and controlled molecular weight were also obtained by the combination of the RAFT agent cumyl dithiobenzoate and Lewis acid Et₂AlCl. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2376–2387, 2006     

Propagation Mechanism of Radical Copolymerization of Sulfur Dioxide and Vinyl Chloride

Radical copolymerization of sulfur dioxide and vinyl chloride (VC) has been studied by the comparison of the composition of copolymers obtaining from different reaction conditions, i.e., reaction temperatures, feed compositions, and total monomer concentrations. The composition of VC in copolymer is independent of comonomer composition except at high concentration of VC in feed; it increases with increasing reaction temperature or decreasing total monomer concentration. At lower temperature, the composition of copolymer becomes independent of total monomer concentration. The overall rate of polymerization is proportional to [VC]^1,7 and [SO₂]^0.5. These results were compared with those obtained in our previous study on the SO₂-styrene copolymerization. A propagation mechanism for radical copolymerization of SO₂ and VC is also proposed.     

New information on the alternating copolymerization of butadiene-1,3 with acrylonitrile

Butadiene-1,3 and acrylonitrile were copolymerized by alkylaluminum halides alone or, more effectively, by the alkylaluminum halide/vanadium compound systems, into an alternating copolymer in which the butadiene units are linked predominantly in the trans-1,4 configuration. The efficiency of the aluminum components in the latter catalyst systems appear to decrease in the following order: AlEtCl₂ > Al₂Et₃Cl₃ ? AlEt₂Cl(?AlCl₃). The alkylaluminum halides could also be used effectually in the form of the complex with acrylonitrile. The catalytic activity was markedly affected by the order of mixing of the catalyst components and the monomers. Effective catalysts could be prepared only when the catalyst components were mixed in the presence of acrylonitrile. The catalyst activity was also found to depend upon the Al/V ratio, reaching its maximum when the ratio was about 20 in the AlEtCl₂·AN/VO(Ot-Bu)₃ system. Other combinations of conjugated diene with conjugated polar vinyl monomer were similarly copolymerized by these catalysts. It was found that different feed ratios between the diene and the vinyl monomer which were varied over a wide range always resulted in the formation of a 1:1 copolymer. The butadiene-acrylonitrile copolymer thus formed gave an NMR spectrum in which there was only one peak assignable to the methylene protons (7.72 τ) of the butadiene unit. On the basis of these findings, it may be suggested that alternating copolymerization prevails in the polymerization systems here investigated.     

Alternating copolymerization of carbon dioxide and epoxide catalyzed by an aluminum Schiff base–ammonium salt system

The alternating copolymerization of carbon dioxide (CO₂) and cyclohexene oxide (CHO) with an aluminum Schiff base complex in conjunction with an appropriate additive as a novel initiator is demonstrated. A typical example is the copolymerization of CO₂ and CHO with the (Salophen)AlMe ( 1a )–tetraethylammonium acetate (Et₄NOAc) system. When a mixture of the 1a –Et₄NOAc system and CHO was pressurized by CO₂ (50 atm) at 80 °C in CH₂Cl₂, the copolymerization of CO₂ and CHO took place smoothly and produced a high polymer yield in 24 h. From the IR and NMR spectra, the product was characterized to be a copolymer of CO₂ and CHO with an almost perfect alternating structure. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis indicated that an unfavorable reaction between Et₄NOAc and CH₂Cl₂ and a possible chain‐transfer reaction with concomitant water occurred, and this resulted in the bimodal distribution of the obtained copolymer. With carefully predried reagents and apparatus, the alternating copolymerization in toluene gave a copolymer with a unimodal and narrower molecular weight distribution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4172–4186, 2005     

Free-Radical Copolymerizations of N-Phenyl Maleimide

Free radical-initiated copolymerization of N-phenyl maleimide (NPMI) with styrene (St), vinyl acetate (VAc) and methyl meth-acrylate (MMA) at 35°C in benzene solution initiated by AIBN was studied. The copolymerization of NPMI and St yields a “nearly equimolecular” alternating copolymer, irrespective of monomer feed. Reactivity ratios of NPMI with St, VAc, and MMA were determined by a curve-fitting method which has the advantage of delivering values not involving personal judgement. Q₁ and e₁ values of NPMI were also calculated. Tentative explanations have been proposed to Interpret the “nearly alternating” copolymerization between NPMI and St. In addition, thermal stabilities of copolymers were studied by using a programmed thermo-gravimetric analysis technique. Copolymers of St, VAc, and MMA show a considerable increase in thermal stability with increasing content of NPMI. The glass transition temperatures of copolymers of NPMI with MMA and St were measured by differential scanning calorimetry. In both series of copolymers the glass transition temperature increases markedly with increasing in NPMI content. In the case of NPMI-St copolymers, the relative thermal stability as well as glass transition temperature also corroborated the nearly alternating behavior observed.     

Charge transfer complex formation in in-situ maleic anhydride and N-vinyl caprolactam copolymer and copolymer/organo-montmorillonite nanoarchitectures

The binary copolymerization of maleic anhydride (MA) and N-vinyl caprolactam (VCL) or considered as acceptor (A)?donor (D) monomer systems were used (MA:VCL) 50:50 in BPO (0.5%) as an initiator at 70°C under nitrogen atmosphere. The functional copolymers, having a combination of rigid/flexible linkages and an ability of complex-formation with interlayered surface of organo-silicate, and their nanocomposites have been synthesized. Interlamellar in situ complex-radical copolymerization of intercalated monomer complexes of MA and VCL undergoes with stearyl amine surface modified montmorillonite (O-MMT) and monomer mixtures. Charge transfer complex formation was followed and identified by UV-Vis-NIR spectroscopy. Equilibrium constant (K_AD) molar absorption coefficient (?^AD)) of the complex were determined by the Benesi-Hildebrand, Scott and Ketaalar equations respectively. The results show that copolymerization of MA:VCL system was preceded via alternating copolymerization mechanism. Obtained functional alternating copolymer and copolymer/O-MMT nanostructures were characterized by XRD and TEM.     

Grafting onto Cellulose. VI. Graft Copolymerization of Vinyl Acetate by Use of Metal Chelates as Initiators

Graft copolymerization of vinyl acetate (VAc) onto cellulose has been studied in an aqueous medium in the presence of Fe(acac)₃, Al(acac)₃, and Zn(acac)₂ as initiators. Percentage of grafting has been determined as a function of concentration of initiators and monomer, reaction time, and temperature. The reactivities of different metal chelates toward grafting of VAc on cellulose have been determined and were found to follow the order: Zn(acac)₂ > Al(acac)₃ > Fe(acac)₃. A plausible mechanism for grafting involving complex formation between metal chelates and vinyl monomer has been suggested. Several grafting experiments were carried out in presence of CCl₄, CHCl₃, CH₃CH₂CH₂SH and Et₃N. All these additives with the exception of Et₃N were found to suppress grafting.     

P(VAc-MMA)为基体的聚合物电解质研究

以醋酸乙烯酯(VAc)和甲基丙烯酸甲酯(MMA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物聚(醋酸乙烯酯-甲基丙烯酸甲酯)[P(VAc-MMA)], 并以此聚合物为基体制备了聚合物电解质. 用红外光谱(FTIR)、核磁共振氢谱(¹H NMR)、扫描电镜(SEM)、差热/热重分析(DSC/TG)、X射线衍射(XRD)、机械性能测试和电化学交流阻抗等方法对聚合物和聚合物电解质的性质进行了研究. 测试结果表明: VAc和MMA聚合生成P(VAc-MMA); 聚合物膜含有大量微孔结构, 利于离子传输; 聚合物电解质膜具有优良的热稳定性和机械强度; 25 ℃下, 最高的离子电导率达到了1.27× 10^－3 S•cm^－1; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程.     

Alternating copolymer of butadiene and propylene. III

Alternating copolymerizations of butadiene with propylene and other olefins were investigated by using VO(acac)₂–Et₃Al–Et₂AlCl system as catalyst. Butadiene–propylene copolymer with high degree of alternation was prepared with a monomer feed ratio (propylene/butadiene) of 4. Alternating copolymers of butadiene and other terminal olefins such as butene-1, pentene-1, dodecene-1, and octadiene-1,7 were also obtained. However, the butadiene–butene-2 copolymerization did not yield an alternating copolymer but a trans-1,4-polybutadiene.     

Studies of the polymerization of diallyl compounds. XII. Cyclocopolymerization of dimethallyl phthalate with vinyl acetate

Dimethallyl phthalate was copolymerized with vinyl acetate at 60°C with the use of benzoyl peroxide as an initiator. The rate and degree of copolymerization increased with an increase in the mole fraction of vinyl acetate. The residual unsaturation of the copolymer was nearly constant, regardless of the feed molar ratio. The monomer reactivity ratios (MRR) were obtained on the basis of the copolymer composition equation in which the intramolecular cyclization reaction was considered: γ₁ = 1.08 (MRR of the uncyclized radical), γ₂ = 0.99 (MRR of vinyl acetate radical), γ_c = 0.73 (MRR of the cyclized radical). The difference between γ₁ and γ_c is discussed.     

Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

Stabilizer‐free dispersion copolymerization of maleic anhydride and vinyl acetate. I. Effects of principal factors on microspheres

A novel dispersion copolymerization of maleic anhydride (MAn) and vinyl acetate (VAc) without adding stabilizer is developed, which gives uniform copolymer microspheres with tunable sizes. Some principal factors affecting the microspheres, such as reaction time, monomer concentration and feed ratio, reaction media, and cosolvent, were investigated. It was found that the stabilizer‐free dispersion copolymerization of MAn and VAc is a rapid process, and the particle size grows in accordance with the evolution of polymerization. The chemical composition of the copolymer microspheres was characterized by FT‐IR and ¹³C NMR spectroscopies. Over a wide range of monomer concentrations, the microspheres can always be formed and stably dispersed, with uniform sizes ranging from 180 nm to 740 nm. The yield of copolymer microspheres reaches a maximum at 1:1 feed ratio of MAn to VAc, owing to the alternating copolymerization between the binary monomers by a known charge‐transfer‐complex mechanism. However, the diameter of microspheres drastically increases when MAn content is enhanced. Only some specific alkyl ester solvents, such as n‐butyl acetate, isobutyl acetate, n‐amyl acetate, are desirably fit for this unique stabilizer‐free dispersion polymerization. Furthermore, we found that when some acetone is added as a cosolvent, the copolymer microspheres can still be formed, with much larger diameters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3760–3770, 2005     

Grafting copolymerization of styrene and maleic anhydride binary monomer systems induced by UV irradiation

Photografting copolymerization of maleic anhydride (MAH) and styrene (St) onto LDPE film was investigated by using a one-step method, and further thermally induced grafting copolymerization of them was carried out by using a two-step method. Regarding the photografting copolymerization of MAH/St binary monomer system, both conversion percentage (CP) and grafting efficiency (GE) increased with raising the content of MAH in the monomer feed. In addition, the content of MAH in the grafted copolymers also increased with increasing the fraction of MAH in the monomer feed. The formation of LDPE-g-P(MAH-co-St) grafted film was identified by FTIR and ESCA spectroscopy. In the case of grafting copolymerization of MAH/St by the two-step method, grafting copolymerization proceeded slowly compared with the non-grafting copolymerization. The apparent activation energy (E_a) for the non-grafting copolymerization in the solution and the grafting copolymerization on LDPE film was 24 and 82 kJ/mol, respectively, which were noticeably lower than those of MAH/vinyl acetate (MAH/VAC) binary monomer system under the similar grafting conditions. These data of E_a explained why the grafting copolymerization of styrene/MAH took place faster than that of MAH/VAC binary monomer system. The composition of the grafted copolymer chains was largely affected by the composition of the monomer feeds; however, the composition of the non-grafted copolymers nearly remained at 1/1 even in systems with largely different MAH/styrene ratios in monomer feeds. It is indicated that the non-grafting copolymerization proceeded predominantly following alternating copolymerization, but the grafting copolymerization performed random copolymerization.     

Copolymerization of vinyl cyclohexane and α-methyl vinyl cyclohexane with acrylonitrile

Copolymerization of vinyl cyclohexane and α-methyl vinyl cyclohexane with acrylonitrile in the presence of a complexing agent AlEtCl₂ results in the formation of alternate copolymers. In the copolymerization of vinyl cyclohexane with acrylonitrile the copolymer composition depends on the ratio of acrylonitrile to AlEtCl₂. If this ratio is unity, alternating copolymers of the composition 1:1 are formed; with a ratio greater than unity statistical copolymers that contain more than 50% acrylonitrile units are produced. The ¹H-NMR spectroscopy measurements indicate that the interaction between the comonomers and the complexing agent leads to the formation of ternary donor–acceptor complexes of equimolar composition. The equilibrium constants of these complexes at ?60°C have been determined. The effects of temperature, nature of solvent and dilution on the yield, and composition of the copolymers of vinyl cyclohexane with acrylonitrile formed have been studied. By lowering the temperature the yield of copolymers increases but their composition remains equimolar. An increase in the polarity of the medium results in an increase in copolymer yield, whereas the yield decreases if the reaction is conducted in a donor-solvent medium. Dilution of the reaction mixture disrupts the alternation of units in the macrochain of copolymers. The kinetic pecularities of copolymerization have been investigated. The linear dependence of the copolymerization rate on the product of comonomer concentration is observed. The rate of copolymerization is proportional to the square root of the incident light intensity. Various additions of radical type and irradiation accelerate the process of copolymerization. The mechanism of alternating copolymerization of vinyl cyclohexane monomers with acrylonitrile in the presence of AlEtCl₂ is discussed in terms of homopolymerization of the comonomer complex.