Thermolysis of disubstituted 1,2-dioxetanes: Activation parameters and chemiexcitation yields

trans-3-Methyl-4-(p-anisyl)-1,2-dioxetane 1, trans-3-methyl-4-(o-anisyl)-1,2-dioxetane 2 , 3-methyl-3-benzyl-1,2-dioxetane 3 , and 3-methyl-3-p-methoxybenzyl-1,2-dioxetane 4 were synthesized in low yield by the β-bromo hydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔG≠ = 22.8 ± 0.3 kcal/mol, Δ≠ = 22.2, ΔS≠ = −1.7 e.u., k₆₀ = 7.6 × 10⁻³s⁻¹; for 2 ΔG≠ + 23.6 ± 0.3 kcal/mol, ΔH≠ = 22.8, ΔS≠ = −2.2 e.u., k₆₀ = 2.5 × 10⁻³S⁻¹; for 3 ΔG≠ = 24.0 ± 0.4 kcal/mol, ΔH≠ = 23.1, ΔS≠ = −2.7 e.u., k₆₀ = 1.2 × 10⁻³S⁻¹; for 4 ΔG≠ = 24.0 ± 0.2 kcal/mol, ΔH≠, = 23.2, ΔS≠, = −2.4 e.u., k₆₀ = 1.2 × 10⁻³s⁻¹). Thermolysis of 1–4 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) [chemiexcitation yields ϕ^T, ϕ^S, respectively: for 1 0.02, 0.0001; for 2 0.02, 0.0001; for 3 0.03, 0.0002; for 4 0.02, 0.0001]. The effect of paramethoxyaryl substitution was consistent with electronic effects. The ortho substitution in 2 resulted in an increase in stability of the dioxetane, opposite that observed for an electronic effect. The results are discussed in relation to a diradical-like mechanism.     

Formation of O(3P) atoms and epoxides from the gas- phase reaction of O3 with isoprene

The formation yields of 1,2-epoxy-2-methyl-3-butene and 1,2-epoxy-3-methyl-3-butene have been measured from the reaction of O₃ with isoprene at room temperature and one atmosphere total pressure of N₂ and air diluents, with and without cyclohexane to scavenge the OH radicals formed in this reaction system. In addition, a relative rate method was used to determine a rate constant for the gas-phase reaction of O₃ with 1,2-epoxy-2-methyl-3-butene of (2.5 ± 0.7) x 10^-18 cm³ molecules^-1 s^-1 at 296 ± 2 K. Our data show that the epoxide yields in N₂ and air diluents are the same, with formation yields of 1,2-epoxy-2-methyl-3-butene of 0.028 ± 0.007 and of 1,2-epoxy-3-methyl-3-butene of 0.011 ± 0.004. These data further show that the epoxides arise from the primary O₃ reaction with isoprene, and not via the formation of O(³P) atoms from the O₃ - isoprene reaction followed by reaction of these O(³P) atoms with isoprene.     

Thermolysis of 3-methyl-3-(o-aryl)-1,2-dioxetanes: Activation parameters and chemiexcitation yields

3-Methyl-3-(o-tolyl)-1,2-dioxetane 1 and 3-methyl-4-(o-bromophenyl)-1,2-dioxetane 2 were synthesized in low yield by the β-bromo hydroperoxide method. The activation parameters were determined by the chemilumin-escence method (for 1 ΔG^? = 24.7 ± 0.3 kcal/mol, ΔH^? = 25.4, ΔS^? = + 1.9 e.u., k₆₀ = 3.4 × 10^?4s^?1; for 2 ΔG^? = 24.7 ± 0.4 kcal/mol, ΔH^? = 24.7, ΔS^? = 0.0 e.u., k₆₀ = 4.1 × 10^?4s^?1). Thermolysis of 1–2 directly produced high yields of excited triplets as expected for this type of dioxetane [triplet chemiexcitation yields (?⁷) for 1 0.03; for 2 0.02; the ?^T/?^S ratios were estimated to be approximately 200 for both compounds]. The effect of ortho-aryl substituents was inconsistent with electronic effects. The ortho substitution in 1–2 resulted in a marked increase in stability of the dioxetanes. The results are discussed in relation to a diradical-like mechanism.     

Acid-Catalyzed Rearrangements of 5,6-exo-Epoxy-7-oxabicyclo[2.2.1]hept-2-yl Derivatives. Migratory Aptitudes of Acyl vs. Alkyl Groups in Wagner-Meerwein Transpositions

In the presence of HSO₃F/Ac₂O in CH₂CL₂, 2-exo- and 2-endo-cyano-5,6-exo-epoxy-7-oxabicyclo[2.2.1]hept-2-yl acetates ( 6a , b ) gave products derived from the epoxide-ring opening and a 1,2-shift of the unsubstituted alkyl group (σ bond C(3)–C(4)). In contrast, under similar conditions, the 5,6-exo-epoxy-7-oxabicyclo[2.2.1]heptan-2-one ( 6c ) gave 5-oxo-2-oxabicyclo[2.2.1]heptane-3,7-diyl diacetates 20 and 21 arising from the 1,2-shift of the acyl group. Acid treatment of 5,6-exo-epoxy-2,2-dimethoxy-7-oxabicyclo[2.2.1]heptane ( 6d ) and of 5,6-exo-epoxy-2,2-bis(benzyloxy)-7-oxabicyclo[2.2.1]heptane ( 6e ) gave minor products arising from epoxide-ring opening and the 1,2-shift of σ bond C(3)–C(4) and major products ( 25 , 29 ) arising from the 1,3-shift of a methoxy and benzyloxy group, respectively. Under similar conditions, 5,6-exo-epoxy-2,2-ethylenedioxy-7-oxabicyclo[2.2.1]heptane ( 6f ) gave 1,1-(ethylenedioxy)-2-(2-furyl)ethyl acetate ( 32 , major) and a minor product 33 , arising from the 1,2-shift of σ bond C(3)–C(4). The following order of migratory aptitudes for 1,2-shifts toward electron-deficient centers has been established: acyl > alkyl > alkyl α-substituted with inductive electron-withdrawing groups. This order is valid for competitive Wagner-Meerwein rearrangements involving equilibria between carbocation intermediates with similar exothermicities.     

Substituent effects on the tautomer ratios between the hydra-zone imine and diazenyl enamine forms in 3-(arylhydra-zono)methyl-2-oxo-1,2-dihydroquinoxalines. Correlation of the hammett constants σp with the tautomeric equilibrium constants KT

The 3-(arylhydrazono)methyl-2-oxo-1,2-dihydroquinoxalines 1a-e and 2a-i showed tautomeric equilibria between the hydrazone imine A and diazenyl enamine B forms in dimethyl sulfoxide media. The sub-stituent effects on the tautomer ratios of A to B in compounds 1a-e and 2a-i were studied by the nmr spec-troscopy. The electron-donating or electron-withdrawing p-substituents R¹ in compounds 2a-i represented a tendency to increase the ratios of the tautomer A or the tautomer B , respectively, exhibiting the linear correlation of the Hammett constants σ_p (-0.17 to +0.78) with the tautomer ratios of A to B or the tautomeric equilibrium constants K_T. However, the presence of the ester group R² in compounds 1a-e induced the exclusive existence of the tautomer A regardless of the nature of the p-substituents R¹. In the tautomeric thermodynamic study, the elevating temperature increased the ratios of the hydrazone imine tautomer A in compounds 2a-i . The tautomeric thermodynamic parameters ΔG°, ΔH° and ΔS° were derived from the van't Hoff plots for compounds 2a , b , h , i , wherein the entropy term dominated the free-energy difference between the A and B tautomers.     

The Course of the Catalytic Hydrogenation/Isomerization Reaction of Steroidal Ring B Olefins in the 13β- and 13α-Series

The course of the catalytic hydrogenation and isomerization (H₂/Raney-Ni/dioxane or H₂/Pd/C/EtOH) of Δ^5.7-, Δ⁷-, Δ⁸-, and Δ⁸⁽¹⁴⁾-steroid olefins was shown to depend strongly on the configuration at C(13). The known hydrogenation/isomerization of reactions of Δ^5.7-dienes in the 13β-series to Δ⁷-(H₂/Raney-Ni/dioxane) and Δ⁸⁽¹⁴⁾-olefins (H₂/Pd/C/EtOH) were also confirmed in the 3β, 19-epoxy-13β- and 3-Oxo-19-acetoxy-13β-steroid series (e.g. 32 → 35 → 37 , Scheme 3). On the other hand, in the corresponding 13α-steroid series the same reactions afforded the Δ⁷-. and the Δ⁸-olefins (mixture of products with H₂/Raney-Ni/dioxane; quantitatively the Δ⁸-compounds with H₂/Pd/C/EtOH; s. e.g. Scheme 3). A similar dependence on the C(13) configuration was observed in the allylic oxidation of these olefins with SeO₂ (Fieser's test, see Table), and in the acid catalyzed opening of the 7α, 8α-epoxides (e.g. 60 → 62 + 63 in the 13β-series, and 56 → 64 + 65 in the 13α-series, Scheme 8).     

Stereochemical studies: XVII—the proton coupling constants and conformational equilibria of trans-1,2-disubstituted cyclohexenes

The vicinal ³J_aa and ³J_ee spin-spin coupling constants of a number of deuterated trans-1,2-disubstituted cyclohexenes and the ΔH and ΔS values of the conformational equilibria of these compounds have been determined by computer optimisation of the ³J(HH) = f(T) function. Compounds with —CF₃ and CCl₃ substituents were shown to have an enhanced proportion of the diaxial conformer.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Die Konformativen Umwandlungen des Ungesättigten Siebenringes in 4.5.6-Trithia-1.2-Benzocycloheptenen-(1) Konformative Beweglichkeit Flexibler Ringsysteme—XVI. Untersuchungen mit Hilfe Der Protonenresonanzspektroskopie

The conformational equilibria and conversions of 4.5.6-trithia-1.2-benzocycloheptene-(1) ( 1 ) and the 3′.6′-dimethoxy-, 3′.6′-dimethyl- and 3′.6′-diphenyl- derivatives ( 2, 3 and 4 ) were investigated by NMR spectroscopy. Solutions of these substances are equilibrium mixtures of two conformers, one presumably having a chair form and the other a boat form. The free enthalpy of the boat conformer ΔG_B is dependent on the size of the substituents (R) in the 3′ and 6′ positions. The ΔG_B values for R = H, OCH₃, C₆H₅ and CH₃ are 1,03, 0,82, 0,50 and ?0,19 kcal/moles, respectively. By slow crystallization one conformer of the substituted trithiabenzocycloheptenes may be obtained in a pure crystalline form. The dimethoxy derivative crystallizes in the chair form, whereas the dimethyl and the diphenyl derivatives crystallize in the boat form. After dissolving the crystals, the conformational equilibrium is restored; at 0°C the half-lifes range from 2 to 15 minutes. By means of the temperature dependence of the NMR spectra two different types of conformational changes may be distinguished experimentally: the slower one is assigned to the inversion of the seven membered ring and the faster one to its pseudorotation. The free enthalpy of activation ΔG_v^≠ of the inversion was determined for 4.5.6-trithia-1.2-benzocycloheptene-(1) by the ‘line-shape’ method and for the diphenyl derivative by the ‘equilibration’ method. Both methods were applied to the other derivatives. The ΔG_v^≠ values obtained by the two different methods agree well with one another. The free enthalpy of activation of the inversion ΔG_v^≠ and of the pseudorotation ΔG_p^≠ both depend on the nature of the substituents. The ΔG_v^≠ values range from 17,9 to 20,5 kcal/mole and the ΔG_p^≠ values are equal to or lower than 11,4 kcal/mole.     

Investigation of reaction of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane

Reactions of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane in the presence of K₂CO₃ in DMSO medium were investigated. The reaction of 1,2-epoxy-3-chloropropane with ethyl acetoacetate afforded ethyl 5-hydroxy-2-methyl-5,6-dihydro-4H-pyran-3-carboxylate, with dimedone, 3-(1′,2′-epoxypropyloxy)-5,5-dimethyl-cyclohex-2-en-1-one.     

Polyanhydrides. I. Preparation of high molecular weight polyanhydrides

Polyanhydrides composed of the following diacids–sebacic acid, bis(p-carboxyphenoxy)propane, bis(p-carboxyphenoxy)hexane, isophthalic acid, 1,4-phenylene dipropionic acid, and dodecanedioic acid–were synthesized by a melt polycondensation process. Polymers of molecular weight up to 137,010 (weight average) and intrinsic viscosity of 0.92 dL/g were achieved. These high molecular weight polymers were reached by using pure isolated mixed anhydrides of diacids and acetic acid, under optimized reaction conditions (temperature of 180°C for 90 min under vacuum of 10^-4 mm Hg). Polymers of higher molecular weights were synthesized in shorter times by using heterogenic coordination catalysts: cadmium acetate, ZnEt₂-H₂O (1:1), barium oxide, calcium oxide, and calcium carbonate. By using these catalysts molecular weights of up to 245,000 were reached in 30 min of reaction. Films made of high molecular weight bis(p-carboxyphenoxy)propane–sebacic acid copolymers showed tensile strengths of 40–160 kg/cm²; the strength increased as a function of the bis(p-carboxyphenoxy)propane content and molecular weight.     

Thermolysis of 3‐alkyl‐3‐methyl‐1,2‐dioxetanes: activation parameters and chemiexcitation yields

3‐Methyl‐3‐(3‐pentyl)‐1,2‐dioxetane 1 and 3‐methyl‐3‐(2,2‐dimethyl‐1‐propyl)‐1,2‐dioxetane 2 were synthesized in low yield by the α‐bromohydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔH‡ = 25.0 ± 0.3 kcal/mol, ΔS‡ = −1.0 entropy unit (e.u.), ΔG‡ = 25.3 kcal/mol, k₁ (60°C) = 4.6 × 10⁻⁴s⁻¹; for 2 ΔH‡ = 24.2 ± 0.2 kcal/mol, ΔS‡ = −2.0 e.u., ΔG‡ = 24.9 kcal/mol, k₁ (60°C) = 9.2 × 10⁻⁴s⁻¹. Thermolysis of 1–2 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) (chemiexcitation yields for 1: ϕ^T = 0.02, ϕ^S ≤ 0.0005; for 2: ϕ^T = 0.02, ϕ^S ≤ 0.0004). The results are discussed in relation to a diradical‐like mechanism. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:176–179, 2001     

Kinetics of oxidation of butane 2,3-diol by osmium(VIII)

The oxidation of butane 2,3-, propane 1,2-, ethane diol and 2-methoxy ethanol in aqueous alkaline medium by Os(VIII) has been studied. The reaction is base catalyzed and shows first-order kinetics in Os(VIII), whereas the order is less than 1 in butane 2,3-diol [BD]. The rate of oxidation is BD > propane 1,2 > ethane diol ≈ 2-methoxy ethanol. The change in ionic strength has no effect on the rate of reaction. Activation parameters ΔE, PZ, and ΔS* have been evaluated.     

1,2-Epoxycarotinoide. 4. Mitteilung. Synthese, 1H-NMR- und CD-Studien von (S)-1,2-Epoxy-1,2-dihydrolycopin und (S)-1′,2′-Epoxy-1′,2′-dihydro-γ-carotin

1,2-Epoxycarotenoids: Synthesis, ¹H-NMR and CD Studies of (S)-1,2-Epoxy-1,2-dihydrolycopene and (S)-1′,2′-Epoxy-1′, 2′ -dihydro-γ-carotene The synthesis of (S)-1,2-epoxy-1,2-dihydrolycopene (^(S)- 1 ) and (S)-1′, 2′ -epoxy- 1′, 2′ -dihydro-γ-carotene ((S)- 2 ) are described. The CD spectra of the (all-E)-isomers and of the isomers (7Z, S)- 1 and (7′Z, S)- 2 are discussed. The comparison of the CD spectra of the synthetic (S)- 1 and the compound isolated from the tomatoes proves the (S)-configuration of the natural product.     

Reaction of tetramethyl-1,2-dioxetane with triphenylphosphine: Activation parameters for the formation of 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane

The reaction of tetramethyl-1,2-dioxetane ( 1 ) and triphenylphosphine ( 2 ) in benzene-d₆ produced 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane ( 3 ) in ?90% yield over the temperature range of 6–60°. Pinacolone and triphenylphosphine oxide ( 4 ) were the major side products [additionally acetone (from thermolysis of 1 ) and tetramethyloxirane ( 5 ) were noted at the higher temperatures]. Thermal decomposition of 3 produced only 4 and 5 . Kinetic studies were carried out by the chemiluminescence method. The rate of phosphorane was found to be first order with respect to each reagent. The activation parameters for the reaction of 1 and 2 were: Ea ? 9.8 ± 0.6 kcal/mole; ΔS^≠ = ?28 eu; k_30° = 1.8 m^?1sec^?1 (range = 10–60°). Preliminary results for the reaction of 1 and tris (p-chlorophenyl)phosphine were: Ea ? 11 kcal/mole, ΔS^≠ = ?24 eu, k_30° = 1.3 M^?1sec^?1 while those for the reaction of 1 and tris(p-anisyl)phosphine were: Ea ? 8.6 kcal/mole, ΔS^≠ = ?29 eu, k_30° = 4.9 M^?1 sec^?1.     

Water soluble calix[4]arenes. A thermodynamic investigation of proton complex formation

Abstract

Thermodynamic parameters of protonation of calix[4]arene-p-tetra sulphonate were potentiometrically and calorimetrically determined in aqueous solution at 25 °C and I = 0.1 mol dm^?3 (NaNO₃). These values were compared with literature findings. ΔH° and ΔS° values reveal that the penta-anion protonation is energetically costly. In this connection the role played by hydrogen bonding and the cone conformation stabilization are critically discussed. Proton formation constants of the calix[4]arene-p-tetrasulphonate-tetra-carboxylate derivative in the cone conformation were also potentiometrically determined under the same experimental conditions.     

Heterocycles. 13. synthesis of [1,2-d]triazolo steroids

Reaction of 1,2-epoxy-5α-3-ketosteroids with sodium azide produces a mixture of expected 2-azido-5α-δ¹-3-ketosteroids and novel [1,2-d]triazolosteroids. A possible pathway for formation of the latter involving 1,3-dipolar cycloaddition of sodium azide is discussed.     

Nitrosation kinetics of phenolic components of foods and beverages

The kinetics of the reactions between sodium nitrite and phenol or m-, o-, or p-cresol in potassium hydrogen phthalate buffers of pH 2.5–5.7 were determined by integration of the monitored absorbance of the C-nitroso reaction products. At pH > 3, the dominant reaction was C-nitrosation through a mechanism that appears to consist of a diffusion-controlled attack on the nitrosatable substrate by NO⁺/NO₂H₂⁺ ions followed by a slow proton transfer step; the latter step is supported by the observation of basic catalysis by the buffer which does not form alternative nitrosating agents as nitrosyl compounds. The catalytic coefficients of both anionic forms of the buffer have been determined. The observed order of substrate reactivities (o-cresol ≈ m-cresol > phenol ≫ p-cresol) is explained by the hyperconjugative effect of the methyl group in o- and m-cresol, and by its blocking the para position in p-cresol. Analysis of a plot of ΔH^# against ΔS^# shows that the reaction with p-cresol differs from those with o- and m-cresol as regards the formation and decomposition of the transition state. The genotoxicity of nitrosatable phenols is compared with their reactivity with NO⁺/NO₂H₂⁺. © 1997 John Wiley & Sons, Inc.     

Synthesis and characterization of certain new poly(bisimide)s. I

Maleic and citraconic anhydrides were reacted with several diamines to obtain a novel class of high temperature resistant bisimides.^1–3 The bisimides were characterized by melting points, elemental analysis, UV–Vis, ¹H- and ¹³C-NMR, and mass spectral analysis. The bisimide monomers were then polymerized by the addition process. A poly(amidemaleimide) was also synthesized by reacting maleic anhydride with p-aminobenzhydrazide. The thermal stability of these highly crosslinked poly(bisimide)s were examined by TGA and DTA. A neat bisimide monomer obtained from 2,2′-bis[4(p-aminophenoxy)phenyl] propane with maleic anhydride namely, 2,2′-bis[4-(p-maleimidophenoxy)phenyl]propane was reacted with 2,2′-bis[4(p-aminophenoxy)phenyl]propane by the Michael reaction.⁴ A fiber glass cloth reinforced laminate was prepared from bismaleimide and amine mixture and the mechanical properties of the test laminate evaluated.     

Synthese von Haschisch-Inhaltsstoffen. 4. Mitteilung

(?)-Cannabidiol has been synthesized from (+)-cis- and (+)-trans-p-menthadien-(2, 8)-ol-(1) and olivetol, using N, N-dimethylformamide dineopentyl acetal or weak acids, such as oxalic, picric, or maleic acid, as catalysts. Since the chirality of (+)-trans-p-menthadien-(2, 8)-ol-(1) is known, the above synthesis constitutes an unambiguous prove for the absolute configuration of (?)-cannabidiol and the two isomeric (?)-6a, 10a-trans-tetrahydrocannabinols. If stronger acids, such as p-toluenesulfonic, trifluoroacetic, or hydrochloric acid, are used as mediators for the reaction, (?)-Δ⁸-6a, 10a-trans-tetrahydrocannabinol is obtained as the main product. Transformation of the thermodynamically more stable Δ⁸-tetrahydrocannabinol into the less stable Δ⁹-isomer was achieved in a practically quantitative yield by addition of hydrochloric acid and elimination of the elements of hydrochloric acid by means of potassium t-amylate. If resorcinols I were used instead of olivetol in the condensation reaction with strong acids, the corresponding homologues of Δ⁸-tetrahydrocannabinol were obtained in varying yields.