Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Generation of highly stable amidate anion in anionic polymerization of 3‐(triethylsilyl)propyl isocyanate

To study living anionic polymerization, 3‐(triethylsilyl)propyl isocyanate (TEtSPI) monomer was synthesized by hydrosilylation of allylamine with triethylsilane and treatment of the resulting amine with triphosgene. The polymerization of TEtSPI was performed with sodium naphthalenide (Na‐Naph) as an initiator and in the absence and presence of sodium tetraphenylborate (NaBPh₄) as an additive in tetrahydrofuran (THF) at ?78 and at ?98 °C. A highly stabilized amidate anion for living polymerization of isocyanates was generated for the first time with the combined effect of the bulky substituent and the shielding action of the additive NaBPh₄, extending the living character at least up to 120 min at ?98 °C. Even the anion could exist at ?78 °C for 10 min. A block copolymer, poly(n‐hexyl isocyanate)‐b‐poly[(3‐triethylsilyl)propyl isocyanate]‐b‐poly(n‐hexyl isocyanate), was synthesized with quantitative yields and controlled molecular weights via living anionic polymerization in THF at ?78 °C for TEtSPI and ?98 °C for n‐hexyl isocyanate, respectively, with Na‐Naph with three times of NaBPh₄ as a common ion salt. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 933–940, 2004     

Highly stereospecific protonation of stereoregular living PMMA anions with several alcohols

Living and highly isotactic poly(methyl methacrylate) (PMMA) anion (M̄n = 2.5 × 10³) prepared with t-C₄H₉MgBr as an initiator was protonated with phenol in toluene at −78°C. The reaction was stereospecific toward meso addition, and the meso/racemo ratio at the chain-end of the resultant polymer was 89/11. Addition of 1,4-dioxane to the living isotactic PMMA anion in toluene at −78°C remarkably reduced the viscosity of the system, and protonation of the PMMA anion with phenol in the presence of 1,4-dioxane enhanced the meso-specificity to 94%. On the other hand, the protonation reaction of the living syndiotactic PMMA anion (M̄n = 2.5 × 10³), which was generated by t-C₄H₉Li/(n-C₄H₉)₃Al in toluene at −93°C, with t-butanol was found to be 97% racemo-specific. These highly stereospecific protonation reactions of the stereoregular PMMA anions were in contrast to the protonation of the anions with methanol or benzyl alcohol which was almost non-stereospecific.     

Stereospecific polymerization of o-methoxystyrene by anionic initiators

o-Methoxystyrene was polymerized with n-butyllithium (n-BuLi), Na naphthalene, and K dispersion as initiators in tetrahydrofuran (THF) and toluene. The stereoregularity of the polymer was investigated by means of the NMR spectroscopy. The methoxy resonance of the spectrum split into ten components due to the tactic pentads. It was found by x-ray examination that the polymer obtained by n-BuLi in toluene at ?45°C was crystalline and highly isotactic. In THF, the stereospecificity of the polymerization was independent of the initiator, and the isotacticity of the polymer increased with increasing reaction temperature. In toluene, the stereospecificity depended on the initiator; i.e., n-BuLi gave a polymer with higher isotacticity than that given by phenylsodium. The fraction of isotactic triad of the polymer obtained by n-BuLi in toluene at ?78°C was more than 90%, but 50% at 50°C. The presence of ca. 1% THF in toluene led to a steep decrease in the isotacticity even at ?78°C. The tacticity of the polymer given by Na naphthalene was not affected by the existence of NaB(C₆H₅)₄ in THF. The polymerization in THF could be explained by Bovey's “single σ” process, while a penultimate effect was observed in the polymerization by n-BuLi in toluene.     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Trityl-initiated copolymerizations of propylene oxide with tetrahydrofuran. VIII. Influence of reaction parameters

The copolymerization of propylene oxide (PO) with tetrahydrofuran (THF) in dichloroethane (DCE) has been studied at ?10, 0, +10, and +20°C. The reactions were initiated by triphenylmethyl cations associated with the following gegenions: PF₆^?, SbF₆^?, and AsF₆^?. The overall energies of activation (E_α of PO and E_a of THF) obtained with the three gegenions increase as one passes from PF₆^? to AsF₆^? then to SbF₆^?, though the magnitude of the increase in each case is not substantial. On the other hand, the associated frequency factors A show a considerable variation with the gegenion. The bimodal distributions of the molecular weights, obtained by GPC with the copolymer produced from reactions initiated with triphenylmethyl hexafluorophosphate, show that the proportions of the lower molecular weight component (L) decrease as the solvent is changed from DCE to toluene, and this is even more marked when bulk polymerization conditions are adopted. The proportions of the higher molecular weight component (H) however increase, as does its molecular weight. The GPC molecular weight distributions of the copolymers initiated with triphenylmethyl hexafluorophosphate in DCE to which water has been added, show that the molecular weight of component H decreases with increasing concentration of water, while that of component L remains practically unchanged at a value of 308. This corresponds to an average degree of polymerization (DP ) of 4 to 5. The NMR and infrared spectra of copolymers prepared in the presence of still higher initial water concentrations indicate that the PO-based polymer segments are present in excess of those required for a 1:1 copolymer.     

The synthesis of diene – alkyl methacrylate diblock and heteroarm star copolymers

The synthesis of A₂B₂ heteroarm stars, where A is either polyisoprene (PI) or polybutadiene (PB) and B is either poly(methyl methacrylate) (PMMA) or poly(butyl methacrylate) (PBMA) has been achieved using living anionic polymerization. Following polymerization of the diene in hexane by sec‐BuLi, the solvent was changed to THF and the living chains were linked in pairs – without loss of anionic reactivity – using 1,2‐bis[4‐(1‐phenylethenyl)]ethane (EPEB). Star synthesis was completed by the addition of MMA or BMA monomer at −78°C. The diblocks were prepared by sequential polymerization. The resulting stereochemistries were those of greatest interest from a practical standpoint, i.e., PI or PB with a high 1,4‐content (which is highly elastic) and syndiotactic PMMA (which has a high T_g).     

Anionic polymerization of n‐hexyl isocyanate with monofuctional initiators. Synthesis of well‐defined diblock copolymers with styrene and isoprene

Several monofunctional initiators, such as s‐BuLi, 1,1‐diphenyl‐4‐methylpentyl lithium (DPMPL), benzyl potassium (BzK), triphenylmethyl sodium (trityl sodium, TrNa) and benzyl sodium (BzNa) were tested and evaluated for the polymerization of n‐hexyl isocyanate (HIC) in THF at ?98 °C. The polymerizations were conducted either without or with additives, such as LiBPh₄, NaBPh₄, and crown ether 18C6. The products were characterized by size exclusion chromatography (SEC), membrane osmometry (MO), and ¹H NMR spectroscopy. The best results regarding polymerization yield, molecular weight distribution, and agreement between the stoichiometric and the experimentally observed molecular weight were obtained by the initiating system BzNa/NaBPh₄ in a molar ratio 1/10. By using BzNa/NaBPh₄ system, well‐defined block copolymers of HIC with styrene or isoprene were synthesized for the first time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3533–3542, 2005     

Living cationic polymerization of cis- and trans-ethyl propenyl ethers and synthesis of block copolymers with isobutyl vinyl ether

The cationic polymerization of cis- and trans-ethyl propenyl ethers (EPE, CH₃? CH?CH? O? C₂H₅), initiated by a mixture of hydrogen iodide and iodine (HI/I₂ initiator) at ?40°C in nonpolar media (toluene and n-hexane), led to living polymers of controlled molecular weights and a narrow molecular weight distribution (MWD) (M?_w/M?_n = 1.2–1.3). The geometrical isomerism of the monomer did not affect the living character of the polymerization. ¹³C NMR stereochemical analysis of the polymers showed that the living propagating end is sterically less crowded than nonliving counterparts generated by conventional Lewis acids (e.g., BF₃OEt₂). New block copolymers between EPE (cis or trans) and isobutyl vinyl ether were also prepared by sequential living polymerization of the two monomers.     

Mechanism of anionic polymerization of (meth)acrylates in the presence of aluminium alkyls, 2. Kinetic investigations with methyl methacrylate in toluene

The kinetics of the polymerization of methyl methacrylate initiated by lithium alkyls (tert-butyllithium or ethyl α-lithiobutyrate) was investigated in the presence of aluminium alkyls (triethylaluminium or triisobutylaluminium) in toluene at −78°C. The rate of polymerization decreases considerably once the living dimer is formed. This suggests that the aluminate end-group coordinates with the penultimate ester group of the polymer chain, thus decreasing reactivity. The results are at variance with an activated monomer mechanism.     

Synthesis of block copolymers containing poly(ferrocenylmethyl methacrylate) units

Ferrocenylmethyl methacrylate (FMMA) has been polymerized by using LiAlH₄–tetramethyl-ethylenediamine initiation to form living polymers in high vacuum systems. The addition of methyl methacrylate or acrylonitrile to these living systems gave the block copolymers FMMA-block MMA and FMMA-block AN. The anions were not nucleophilic enough to initiate styrene polymerization. Therefore, living polystyrene was prepared (sodium naphthalide initiation in THF at ?78°C) and upon FMMA addition, styrene-block FMMA copolymers were formed. Extraction, precipitation, and gel-permeation chromatography studies were performed to examine the purity of the block copolymers.     

Anionic homopolymerization of ferrocenylmethyl methacrylate

Anionic polymerization of ferrocenylmethyl methacrylate (FMMA) was investigated using high-vacuum techniques. Initiators used included n-butyllithium, sodium naphthalide, potassium naphthalide, Grignard reagents (both C₂H₅MgBr and C₆H₅MgBr), sodium methoxide, and lithium aluminum hydride. FMMA polymerization was readily initiated by each of the above initiators with the exception of sodium methoxide. The molecular weight of poly(ferrocenylmethyl methacrylate) could be controlled by varying the monomer-to-initiator ratio when lithium aluminum hydride was used in tetrahydrofuran (THF). In this system, poly(ferrocenylmethyl methacrylate), soluble in benzene or THF, was prepared with M?_n as high as 277,000 with a relatively narrow molecular weight distribution compared to samples prepared by radical-initiated polymerization. The Mark-Houwink values of K and a, determined in THF, were K = 4.94 × 10^?2 and a = 0.53 (when M = M?_n) and K = 3.72 × 10^?2 and a = 0.51 (when M = M?_w). It is clear that the polymer is moderately coiled in THF.     

Living anionic polymerization of lauryl methacrylate and synthesis of block copolymers with methyl methacrylate

Anionic polymerization of lauryl methacrylate (LMA) with 1,1‐diphenylhexyl lithium in tetrahydrofuran (THF) at ?40 °C resulted in a multimodal and broad molecular weight distribution (MWD) with poor initiator efficiency. In the presence of additives such as dilithium salt of triethylene glycol (G₃Li₂), LiCl, and LiClO₄, the polymerization resulted in polymers with a narrow MWD (≤ 1.10). Diblock copolymers of methyl methacrylate (MMA) and LMA were synthesized by anionic polymerization using DPHLi as initiator in THF at ?40 °C with the sequential addition of monomers. The molecular weight distribution of the polymers was narrow and without homopolymer contamination when LMA was added to living PMMA chain ends. Diblock copolymers with broad/bimodal MWD were obtained with a reverse‐sequence monomer addition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 875–882, 2004     

Asymmetric polymerization of the mixture of TrMA and MMA initiated by chiral complexes

A mixture of triphenylmethyl methacrylate (TrMA) and methyl methacrylate (MMA) was polymerized with chiral anionic initiator, such as fluorenyl lithium(−)-sparteine [FlLi-(−)-Sp] and fluorenyl lithium-(+)-2S,3S-dimethoxy-1,4-bis(dimethylamino)butane [FlLi-(+)-DDB] in toluene at −78°C. The results show that after the stable helix formed, when FlLi-(+)-DDB was used as the initiator, TrMA and MMA could be copolymerized, whereas when FlLi-(−)-Sp was used, the two monomers tended to be selectively polymerized into two polymers. This phenomenon has been explained by the existence of helix-selective polymerization. © John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1925–1931, 1997     

Branching of anionic poly(methyl methacrylate)

A viscometric determination of the degree of branching γ, of poly(methyl methacrylate) obtained by anionic polymerization proved the reaction of the growing center of poly(methyl methacrylate) with the ester group of another polymer molecule, accompanied by the formation of a trifunctional branch point. This reaction occurs if the solution polymerization of methyl methacrylate is initiated: (1) with butyllithium at ?78°C only on attaining 100% conversion and after a long time or at +20°C immediately after the polymerization has set in; (2) with lithium tert-butoxide at +20°C after a long time. The degree of branching of poly(methyl methacrylates) obtained under similar conditions in the presence of tetrahydrofuran reaches higher values than for polymers prepared in toluene. The tacticity of polymers does not affect the experimentally determined γ values.     

Anionic polymerization of methacrylate monomers initiated by lithium dialkylamides

The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (M_w/M_n = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997     

Isolation and Characterization,Including by X‐ray Crystallography,of Contact and Solvent‐Separated Ion Pairs of Silenyl Lithium Species

Reaction of bromoacylsilane 1 (pink solution) with tBu₂MeSiLi (3.5 equiv) in a 4:1 hexane:THF solvent mixture at ?78 °C to room temperature yields the solvent separated ion pair (SSIP) of silenyl lithium E‐[(tBuMe₂Si)(tBu₂MeSi)C=Si(SiMetBu₂)]^? [Li?4THF]⁺ 2 a (green–blue solution). Removal of the solvent and addition of benzene converts 2 a into the corresponding contact ion pair (CIP) 2 b (violet–red solution) with two THF molecules bonded to the lithium atom. The 2 a ? 2 b interconversion is reversible upon THF? benzene solvent change. Both 2 a and 2 b were characterized by X‐ray crystallography, NMR and UV/Vis spectroscopy, and theoretical calculations. The degree of dissociation of the Si?Li bond has a large effect on the visible spectrum (and thus color) and on the silenylic ²⁹Si NMR chemical shift, but a small effect on the molecular structure. This is the first report of the X‐ray molecular structure of both the SSIP and the CIP of any R₂E=E′RM species (E=C, Si; E′=C, Si; M=metal).     

Potassium enolates of N,N‐dialkylamides as initiators of anionic polymerization

Stable potassium enolates of N,N‐diethylacetamide [α‐potassio‐N,N‐diethylacetamide ( 1 )], N,N‐diethylpropionamide [α‐potassio‐N,N‐diethylpropionamide ( 2 )], and N,N‐diethylisobutyramide [α‐potassio‐N,N‐diethylisobutyramide ( 3 )] were prepared by the proton abstraction of the corresponding N,N‐diethylamides with diphenylmethylpotassium (Ph₂CHK) or potassium naphthalenide in THF. The relative nucleophilicity of 1 – 3 was estimated to be in the order of 1 < 3 < 2 from the results of the alkylation reaction with methyl iodide. N,N‐diethylacetamide transferred its α‐proton to 2 quantitatively in THF at 0 °C, whereas no reaction occurred between N,N‐diethylisobutyramide and 2 ; this indicated the relative basicity to be 1 < 2 ～ 3 . Anionic polymerizations of N,N‐diethylacrylamide (DEA) and methyl methacrylate were quantitatively initiated with 2 in THF at ?78 °C, whereas the initiation efficiencies of 2 for styrene and 2‐vinylpyridine were about 2 and 67%, respectively. The initiation of DEA with 1 – 3 at ?78 or 0 °C in THF gave poly (DEA)s having broad molecular weight distributions (MWDs; M_w/M_n = 2) and ill‐controlled molecular weights. In contrast, poly(DEA)s of narrow MWDs (M_w/M_n < 1.2) and predicted M_n's were obtained with 2 in the presence of diethylzinc (Et₂Zn) at ?78 °C, whereas the initiations with 1 /Et₂Zn and 3 /Et₂Zn at ?78 °C resulted in poor control of the molecular weights. At the higher temperature of 0 °C, all the binary initiator systems ( 1 – 3 /Et₂Zn) induced controlled polymerizations of DEA in terms of the conversion, molecular weight, and MWD. The poly(DEA)s produced with 1 – 3 /Et₂Zn at 0 °C showed mr‐rich configurations (mr = 76–89%), as observed for the poly(DEA) generated with Ph₂CHK/Et₂Zn. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1260–1271, 2007     

Beiträge zur Chemie des Phosphors, 45. Triphenyl-cyclotriphosphan - ein Derivat des P3H3

Contributions on the chemistry of phosphorus. 45. Triphenyl cyclotriphosphane - a derivative of P₃H₃ Triphenyl-cyclotriphosphane-dipotassium ( 2 ) can be prepared without solvent by metallation of pentaphenyl-cyclopentaphosphane ( 3 ) with the stoichiometric amount of potassium in benzene, moreover by precipitation of the corresponding reaction solution in tetrahydrofuran with toluene or petroleum ether. However, 2 · THF is formed when the solvent is removed completely, 2 or 2 · THF react with iodine at - 78°C to give the compounds K₂(C₆H₅P)₃ (4) or 4 · THF. These decompose in solution under formation of potassium iodide and triphenyl-cyclotriphosphane ( 1 ), not described before. 1 could be isolated in a pure state. It differs from 3 by its characteristic melting behaviour and the osmometric molecular weight, but especially by the i.r. and mass spectrum. 1 is stable at ? 20 °C for several weeks, but rearranges easily to give the more stable 3 , especially at somewhat higher temperatures.     

{(MesGa)3[GaP(H)Mes](PMes)4}, Ein phosphorsubstituiertes Ga?P-Heterocuban

{(MesGa)₃[GaP(H)Mes](PMes)₄}, a Phosphorus-substituted Ga? P-Heterocubane A mixture of MesGaCl₂/GaCl₃ (ratio 3:1) reacts with 5 equivalents of MesPLi₂ in THF at ?78°C to the title compound {(MesGa)₃[GaP(H)Mes](PMes)₄} ( 1 ) by use of the “dilution principle”. 1 can be obtained in 30% yield. Recrystallization of 1 from DME and toluene, respectively, gives 1 · 0.5 DME and 1 · toluene. 1 was characterized by NMR-, IR-, and MS-techniques. According to the X-ray structure determination of 1 · toluene, 1 has a heterocubane structure, one corner of which is substituted with an P(H)Mes group.