Synthesis of β-butylsulfanyl α-oligothiophenes from 3-butylsulfanyl-2,2′-bithiophene

β-Butylsulfanyl tetra-, sexa-, and octathiophenes were synthesized by oxidative coupling with iron(III) chloride from 3-butylsulfanyl-2,2′-bithiophene. Tetrathiophene was also generated through coupling reac tions. The nmr characterization of oligomers is reported and discussed.     

(1H‐Pyrazole‐κN2)(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)platinum(II) bis(perchlorate) nitromethane monosolvate

The reaction between [PtCl(terpy)]·2H₂O (terpy is 2,2′:6′,2′′‐terpyridine) and pyrazole in the presence of two equivalents of AgClO₄ in nitromethane yields the title compound, [Pt(C₃H₄N₂)(C₁₅H₁₁N₃)](ClO₄)₂·CH₃NO₂, as a yellow crystalline solid. Single‐crystal X‐ray diffraction shows that the dicationic platinum(II) chelate is square planar with the terpyridine ligand occupying three sites and the pyrazole ligand occupying the fourth. The torsion angle subtended by the pyrazole ring relative to the terpyridine chelate is 62.4 (6)°. Density functional theory calculations at the LANL2DZ/PBE1PBE level of theory show that in vacuo the lowest‐energy conformation has the pyrazole ligand in an orientation perpendicular to the terpyridine ligand (i.e. 90°). Seemingly, the stability gained by the formation of hydrogen bonds between the pyrazole NH group and the perchlorate anion in the solid‐state structure is sufficient for the chelate to adopt a higher‐energy conformation.     

Synthesis and structure of (4R,5R)-α,α,α′,α′-2,2-hexaphenyl-4,5-dimethanol-1,3-dioxolane

We report the synthesis of the 1,4-diol (4R,5R)-α,α,α′,α′-2,2-hexaphenyl-4,5-dimethanol-1,3-dioxolane from dimethyl-L-tartrate and benzophenone. The X-ray and the IR structural studies on show that this compound has a preferred conformation with OHPh interactions which are different from related compounds.     

μ‐{N,N′‐Bis[2‐(dimethyl­amino)ethyl]oxamidato(2–)}‐1κ2O,O′:2κ4N,N′,N′′,N′′′‐bis­(4,4′‐dimethyl‐2,2′‐bipyridine‐1κ2N,N′)dinickel(II) bis­(perchlorate)

In the crystal structure of the title complex, [Ni₂(C₁₀H₂₀N₄O₂)(C₁₂H₁₂N₂)₂](ClO₄)₂ or [Ni(dmaeoxd)Ni(dmbp)₂](ClO₄)₂ {H₂dmaeoxd is N,N′‐bis­[2‐(dimethyl­amino)ethyl]oxamide and dmbp is 4,4′‐dimethyl‐2,2′‐bipyridine}, the deprotonated dmaeoxd²⁻ ligand is in a cis conformation and bridges two Ni^II atoms, one of which is located in a slightly distorted square‐planar environment, while the other is in an irregular octa­hedral environment. The cation is located on a twofold symmetry axis running through both Ni atoms. The dmaeoxd²⁻ ligands inter­act with each other via C—H⋯O hydrogen bonds and π–π inter­actions, which results in an extended chain along the c axis.     

Synthese von (R)-β, β-Carotin-2-ol und (2R, 2′R)-β, β-Carotin-2,2′-diol

Synthesis of (R)-β, β-Caroten-2-ol and (2R, 2′R)-β, β-Carotene-2,2′-diol Starting from geraniol, the two carotenoids (R)-β, β-caroten-2-ol ( 1 ) and (2R, 2′R)-β, β-carotene-2,2′-diol ( 3 ) were synthesized. The optically active cyclic building block was obtained by an acid-catalysed cyclisation of the epoxide (R)- 4 . The enantiomeric excess of the product was > 95 %.     

(Aqua‐2κO)bis(2,2′‐bipyridine‐1κ2N,N′){μ‐N‐[3‐(dimethylamino)propyl]‐N′‐(2‐oxidophenyl)oxamidato(3−)‐1:2κ2O,O′:κ4O′′,N,N′,N′′}copper(II)nickel(II) perchlorate

The title complex, [CuNi(C₁₃H₁₆N₃O₃)(C₁₀H₈N₂)₂(H₂O)]ClO₄, has a cis‐oxamide‐bridged heterobinuclear cation, with a Cu...Ni separation of 5.3297 (6) Å, counterbalanced by a disordered perchlorate anion. The Cu^II and Ni^II cations are located in square‐pyramidal and octahedral coordination environments, respectively. The complex molecules are assembled into a three‐dimensional supramolecular structure through hydrogen bonds and π–π stacking interactions. The influence of the two types of metal cation on the supramolecular structure is discussed.     

Tris(2,2′‐bioxazoline‐κ2N,N′)copper(II) diperchlorate and tris(2,2′‐bioxazoline‐κ2N,N′)­nickel(II) diperchlorate

In the two isomorphous title compounds, viz. tris­[2,2′‐bi(4,5‐di­hydro‐1,3‐oxazole)‐κ²N,N′]copper(II) diperchlorate, [Cu(C₆H₈N₂O₂)₃](ClO₄)₂, (I), and tris­[2,2′‐bi(4,5‐di­hydro‐1,3‐oxazole)‐κ²N,N′]­nickel(II) diperchlorate, [Ni(C₆H₈N₂O₂)₃](ClO₄)₂, (II), the M^II ions each have a distorted octahedral coordination geometry formed via six N atoms from three 2,2′‐bioxazoline ligands. For each ligand, the two five‐membered rings are nearly coplanar. It is noteworthy that the Jahn–Teller effect is stronger in (I) than in (II). The three‐dimensional supramolecular structures of (I) and (II) are formed via weak hydrogen‐bonding interactions between O atoms from per­chlorate anions and H atoms from 2,2′‐bioxazoline ligands.     

Synthesis of novel α,α′,β-trisubstituted β-lactones

A concise and efficient synthesis of α,α′,β-trisubstituted β-lactones is presented. These novel lactones are easily obtained in five steps and will be dedicated to anionic ring opening polymerization.     

Synthesis of α-2′-deoxynucleosides

α-Thymidine (4) was synthesized from thymidine (1) in 3 steps in 36% overall yield without using chro-matography and with the possibility of increasing the yield to 85% by reusing the remaining α,β-mixture. 1-(2-Deoxy-3,5-di-O-p-toluoyl-α-D-erythro-pentofuranosyl)thymine (3) was further converted to 1-(2-deoxy-α-D-erythro-pentofuranosyl)-5-methylcytosine (5) .     

Nucleosides and Nucleotides. Part 13. Synthesis and spectral properties of 1- (3′-O-Phosphoryl-2′-deoxy-β -D-ribofuranosyl)-2(1H)-pyridone-(3′-5′)-1-(2′-deoxy-β-D-ribofuranosyl)-2 (1H)-pyridone

The dinucleoside phosphate Π_dpΠ_d ( 4 ) was synthesized from the monomers 1-(5′-O-monomethoxytrityl - 2′ - deoxy - β - D - ribofuranosyl) - 2 (1 H) - pyridone ((MeOTr) Π_d, 2 ) and 1-(5′-O-phosphoryl-3′-O-acetyl-2′-deoxy-β-D -ribofuranosyl)-(1H)-pyridone (pΠ_d(Ac), 3 ). Its 6.4% hyperchromicity and an analysis of the ¹H-NMR. spectra indicate that the conformation and the base-base interactions in 4 are similar to those in natural pyrimidine dinucleoside phosphates.     

Synthesis and thermolysis of N-heteroarylacetylazides and α-oximino-α-(N-heteroaryl)acetylazides

Treatment of N-heteroarylacethydrazides with an equimolar amount of nitrous acid afforded N-heteroaryacetylazides and subsequent thermolysis of these azides gave the analogues of 2,3-dihydroimidazo[1,5-a]pyridin-3-one. When some of these cyclized compounds were treated with nitrous acid, the ring opening reaction occurred and recyclized 3-(N-heteroaryl)-1,2,4-oxadiazolin-5-ones were obtained. Treatment of N-heteroarylacethydrazides with two equivalent moles of nitrous acid afforded α-oximino-α-(N-heteroaryl)acetylazides. Thermolysis of these azides gave mixtures of 3-(N-heteroaryl)-1,2,4-oxadiazolin-5-one and 3-hydroxy-4-(N-heteroaryl)furazan. On the basis of the effects of heterocyclic rings and solvents upon the relative yield of two types of the products, one plausible mechanistic explanation for the decomposition of such azides was proposed. α-Oximino-α-(H-heteroaryl)acetylazides were converted into cyano N-heterocycles by the action of alkali in good yields.     

{μ‐N,N′‐Bis[2‐(dimethylamino)ethyl]oxamidato(2–)‐κ6N,N′,O′:N′′,N′′′,O}bis[(2,2′‐bipyridine‐κ2N,N′)copper(II)] bis(perchlorate)

In the crystal structure of the title complex, [Cu₂(C₁₀H₂₀N₄O₂)(C₁₀H₈N₂)₂](ClO₄)₂, the deprotonated dmaeoxd²⁻ ligand {H₂dmaeoxd is N,N′‐bis[2‐(dimethylamino)ethyl]oxamide} occupies an inversion centre at the mid‐point of the central C—C bond and is thus in a trans conformation. The two Cu^II atoms are located in slightly distorted square‐based pyramidal environments. The binuclear units interact with each other viaπ–π interactions to form a one‐dimensional chain extending in the c direction.     

(2,2′‐Biquinoline‐κ2N,N′)bis(nitrato‐κ2O,O′)copper(II)

In the title monomer, [Cu(NO₃)₂(C₁₈H₁₂N₂)], the six‐coordinated Cu^II atom lies on a twofold axis which bisects one of the ligands (a chelating biquinoline) and duplicates the remaining ligand, a chelating nitrate. The latter binds in a very asymmetric way, consistent with a Jahn–Teller distortion in the coordination polyhedron which, due to the triple chelation, is extremely distorted and difficult to describe in terms of any regular model.