Deactivation of fused silica capillary columns with cyanopropylhydrosiloxanes

A method is described for surface deactivation and modification of fused silica capillary columns with a cyanopropyl-containing reagent. The deactivation procedure involved a dehydrocondensation reaction between a bis(cyanopropyl)methylhydropolysiloxane reagent and surface silanol groups at an optimum temperature of only 250°C. Actual critical surface tension measurements were made using the capillary rise method. Excellent deactivation for acidic and basic compounds at the low ng level, and wettability for nonpolar and polar polysiloxane stationary phases were obtained. A procedure was developed to remove acidic impurities that are present in polar stationary phases.     

Deactivation of fused silica capillary columns with phenylhydrosiloxanes

In this work, an investigation of new organosilicon hydride reagents with phenyl functional groups for deactivation and surface modification of fused silica capillary columns is described. Different reagents were tested for their ability to deactivate the fused silica surface, and actual critical surface tension measurements were made using the capillary rise method. The deactivation procedure required lower optimum temperatures than conventional methods. Deactivated capillaries and coated capillary columns were prepared and tested for reproducibility, efficiency, and surface inertness towards basic and acidic compounds at the low nanogram level.     

Hydrothermal treatment of fused silica capillary columns

The activity of fused silica capillary tubing has been shown to vary considerably, which severely influences the reproducibility of column deactivation and inertness. Methods for producing a reproducible, high activity surface with maximum hydroxylation by various hydrothermal treatments were evaluated. Columns pretreated with 20% nitric acid at 200°C for 10 hours, deactivated with D₄, coated with OV-73, and crosslinked with azo-tert-butane were found to possess excellent inertness for sensitive analytes such as alcohols, amines, and alkaloid drugs.     

Loss of water during heat treatment of acid leached glass and fused silica capillary columns

A study was carried out on the effects of acid leaching of capillary column wall materials. Leaching experiments with glass and fused silica were performed under static and dynamic conditions; moreover, the influence of the temperature was investigated. The amount of water released during different temperature programs was measured with a microwave plasma detector. Different leaching conditions and column wall materials cause considerable variations in water production. These results probably explain the disappointing deactivation efficiency obtained for fused silica and dynamically leached soft glass if HMDS is used. Evidence was found for an increase in surface area due to acid leaching.     

A new method for in situ crosslinking of stationary phases on fused silica capillary columns

A new mixed crosslinking agent composed of dicumyl peroxide and tetra(methylvinyl)cyclotetrasiloxane was used to prepare fused silica capillary columns with in situ crosslinked stationary phases including PEG-20M, SE-54, and OV-1. These columns proved to have good thermostability and inertness. As examples of potential applications a mixture of isomers of nitrotoluene and dinitrotoluene, and pyrolyzates of polystyrene were separated by using these columns.     

Fused silica capillary micro-packed columns in gas chromatography

Summary Flexibility, strength and adsorption inertness of fused-silica capillaries permits their extensive application for the preparation of micro-packed columns in gas chromatography. Decreasing the column diameter (from 0.5 to 0.15 mm) and the diameter of the sorbent particles (from 100 to 5 μm) results in a marked reduction of the height equivalent to a theoretical plate (HETP), as well as in diminishing the dependence of the HETP on the carrier gas flow rate. The chromatographic characteristics of fused-silica capillary micro-packed columns and open-tubular columns are compared. The fused-silica capillary micro-packed column can be used to advantage for performing rapid and trace analyses and have been shown to be adapted for application in gas-solid chromatography. Separation of organic and inorganic compounds on fused-silica capillary micro-packed columns is illustrated by practical examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

On the stability of micro-LC columns (packed fused silica capillary columns)

The life expectancy and resistance to flow, pressure shocks, solvent gradients, and bending of packed fused silica capillary columns (Micro-LC) are discussed.     

Determination of surface hydroxyl concentration on glass and fused silica capillary columns

Summary The concentration of surface hydroxyl groups on three types of capillary columns was determined by exchanging the hydroxyl protons with tritium. The tritium was quantified by combustion to tritiated water followed by scintillation counting. The number of hydroxyl groups on a leached and presumably hydroxylated Pyrex glass capillary column was found to be about 2.8 groups per square nanometer. This value was slightly less than the 4.6 groups per square nanometer that is generally accepted for a fully hydroxylated porous silica. Dehydroxylation of the same glass by heating at 600°C left only 0.4 groups per square nanometer while an untreated fused silica had only 0.2 groups per square nanometer.Dedicated to Dr. Leslie S. Ettre for his 60th birthday.     

Characterization of glass,quartz, and fused silica capillary column surfaces from contact-angle measurements

Summary This paper describes the systematic characterization of glass and the newly introduced fused silica and quartz capillary columns from surface wettability measurements. Common gas chromatographic stationary phases were used in capillary-rise measurements at temperatures up to 300°C. By construction of Zisman plots and using the Cassie equation, the relative surface concentrations of wettable and non-wettable groups were determined. By application of the Fowkes equation, the dispersion force component of the surface energy was investigated. The influence of various surface treatments such as leaching, silylation, and polymeric film formation are discussed. Wettability measurements were also used to evaluate the thermostability of various treated surfaces and to compare the surface properties of glass, quartz, and fused silica. The wettability of the surfaces with selected stationary phases as a function of temperature is also discussed.     

A study of some deactivation methods for fused silica capillary columns by CP-MAS NMR and capillary gas chromatography

The effect of deactivating a fused silica surface by silylation with 1,1,3,3-tetraphenyl-1,3-dimethylilazane (TPDMDS), triphenylsilylamine (TPSA), and octamethylcyclotetrasiloxane (D4) and by polydimethylsiloxane degradation (PSD) is studied. Rehydrated, dried, and deactivated Cab-O-Sil M5 samples are used as model materials for ²⁹Si CP-MAS NMR analysis. At about 350 °C, TPDMDS yelds mainly diphenylmethylsiloxysilane, dimethyldisiloxysilane, and triphenylsiloxysilane groups. TPSA yields phenyltrisiloxysilane, diphenyldisiloxysilane, and triphenylsiloxysilane groups. At 400°C, the products formed initially are eventually replaced by methyltrisiloxysilane or phenyltrisiloxysilane groups, while a substantial number of silanol groups still remains. The possible consequences for wettability are discussed. D4 reacts with Cab-O-Sil even at 200°C, but a large number of silanol groups remains. This number decreases gradually at higher temperatures and becomes negligible above 400°C. The formation of methyltrisiloxysilane groups, which starts at 425°C, is predominant at 490°C.     

Evolution and application of the fused silica column

Fused silica is an evolutionary product of continuing efforts to improve our chromatographic capabilities. It offers the normal user new horizons in inertness, chromatographic reproducibility, ease of column installation, and possibilities in on-column trapping. Since this writing, chemically bonded phases in several film thicknesses became available on fused silica columns, and these are especially well suited to on-column injections. The use of fused silica syringe needles to inject directly onto fused silica columns seems particularly interesting. Evolution is, of course, a continuous process and it would appear that we can expect continuing developments in this exciting area.     

Porous ceramic bed supports for fused silica packed capillary columns used in liquid chromatography

Porous ceramic bed supports for fused silica packed capillary columns utilized in liquid chromatography were prepared by polymerizing solutions containing potassium silicate in-situ within a column to create a mechanically stable, rugged, and easily constructed termination. The effect of the bed support length on efficiency, and comparisons to glass wool bed supports, were considered in terms of column efficiencies and hydrodynamic variables. Results obtained indicate better performance for the ceramic bed support.