Synthesis and optoelectronic characterization of poly(fluorenylethynylene)s containing perylene bisimide moiety in the backbone

A series of poly(fluorenylethynylene)s containing different ratios of perylene bisimide moiety in the backbone were synthesized by Sonogashira cross‐coupling reaction. The electron‐deficient perylene bisimide moiety was introduced into the backbone to construct the donor‐acceptor architectures. The chemical structures of these copolymers were determined by ¹H NMR and FTIR. The solubility, thermal, and optoelectronic properties were studied. The results of UV–vis absorption and fluorescence spectra of these copolymers showed that intramolecular energy transfer and charge separation occur between the fluorenyl alkyne segment and perylene bisimide moiety. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1932–1938, 2008     

Synthesis and characterization of new telechelic poly(phenyleneoxide)s

New well-defined telechelic poly(phenyleneoxide)s (PPO's) were synthesized from 4-bromo-2,6-dimethylphenol and bi-phenolic compounds through phase transfer catalyzed aromatic nucleophilic substitution polymerization. Bisphenol-A (BPA), 4,4^′-biphenol (BP), hydroquinone (HQ) and 2,6-dihydroxynaphthalene (DHN) were employed as telechelic units. The composition analysis by proton-nuclear magnetic resonance (¹H-NMR) spectroscopy revealed that DHN was highly reactive compared to BPA and HQ, whereas BP was un-reactive in the polymerization process. The number average repeating unit (n) in telechelic PPO was estimated as n=17-19 and n=17-20 for DHN and BPA (or HQ), respectively. The reactivity of the bi-phenolic in PPO synthesis are confirmed as DHN > HQ ∼ BPA ? BP. The molecular weight determination by gel permeation chromatography (GPC) and viscosity method suggest that the molecular weight of PPO decreased drastically with increasing amount of bi-phenolic units in the feed. The GPC chromatogram of PPO showed a bi-modal distribution, clearly indicative of formation of two different types of molecular weight chains, whereas the telechelic polymers have a mono-modal distribution with a narrow polydispersity. Thermal analysis by differential scanning calorimetry revealed that telechelic polymers are highly amorphous, like PPO, and no crystallization or melting peaks were observed in the heating/cooling cycles.     

Synthesis and characterization of new fluorescent poly(arylene ether)s

The poly(arylene ether)s were prepared by the nucleophillic aromatic substitution polymerization of phenolphthalin and its derivatives with activated aromatic difluorides. The polymers had glass transition temperatures ranging from 210 to 240°C. Though the monomers have no fluorescence, the resulting polymers fluoresced a light green color in solid and solution states. The maximum excitation and emission wavelengths are 420 nm and 470 nm, respectively. In the polymer solutions, the fluorescence intensity decreased gradually, but the intensity was recovered by heating the polymer at 220°C for a few minutes. The fluorescent polymer had a stable radical. A model compound having the same repeating unit of the polymer was also prepared. The fluorescence properties of this model were almost the same as those of the polymers. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

Synthesis and characterization of poly(urethane-sulfone)s

Eight poly(urethane-sulfone)s were synthesized from two sulfone-containing diols, 1,3-bis(3-hydroxypropylsulfonyl)propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl)butane (Diol-343), and three diisocyanates, 1,6-hexamethylene diisocyanate (HMDI), 4,4′-diphenylmethane diisocyanate (MDI), and tolylene diisocyanate (TDI, 2,4- 80%; 2,6-20%). As a comparison, eight polyurethanes were also synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and three diisocyanates. Diol-333 and Diol-343 were prepared by the addition of 1,3-propanedithiol or 1,4-butanedithiol to allyl alcohol and subsequent oxidation of the resulting sulfide-containing diols. The homopoly(urethanesulfone)s from HMDI and MDI are semicrystalline, and are soluble in m-cresol and hot DMF, DMAC, and DMSO. The copoly(urethane-sulfone)s from a 1/1 molar ratio mixture of Diol-333 and Diol-343 with HMDI or MDI have lower crystallinity and better solubility than the corresponding homopoly(urethane-sulfone)s. The poly(urethane-sulfone)s from TDI are amorphous, and are readily soluble in m-cresol, DMF, DMAC, and DMSO at room temperature. Differential scanning calorimetry data showed that poly(urethane-sulfone)s have higher glass transition temperatures and melting points than the corresponding polyurethanes without sulfone groups. The rise in glass transition temperature is 20–25°C while the rise in melting temperature is 46–71°C. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(amide-sulfonamide)s

Novel poly(amide-sulfonamide)s have been prepared by reacting terephthaloyl, isophthaloyl, and sebacoyl chloride with variously substituted dianilines containing preformed sulfonamide linkages. Inherent viscosities of the prepared polymers ranged from 0.19 to 0.58 dL/g. Despite low apparent viscosities, the polymers had film forming properties. Clear, tough, flexible films were obtained from the prepared polymers, in particular the poly(terephthalamide-sulfonamide)s. Glass transition temperatures, determined by differential scanning calorimetry, ranged from 84 to 247°C. Thermogravimetric analyses of the polymers showed that they have moderate thermal stability with weight losses ranging from 12 to 35% at 350°C.     

Synthesis and characterization of poly(ester-sulfone)s

Aliphatic and aromatic-aliphatic poly(ester-sulfone)s were synthesized by the transesterifications of diphenyl adipate and diphenyl phthalates (ortho, meta, para) with two sulfonecontaining diols, 1,3-bis (3-hydroxypropylsulfonyl) propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl) butane (Diol-343). Based on DSC and WAXD studies, the aliphatic homopoly(ester-sulfone)s are semicrystalline at room temperature and liquid crystalline at elevated temperature, while their copolymers with alkanediols are liquid crystalline. The liquid crystalline phase formation in aliphatic poly(ester-sulfone)s is attributed to the strong dipole-dipole interactions between sulfone groups. The aromatic-aliphatic poly(estersulfone)s from diphenyl phthalate (ortho) and isophthalate (meta) are amorphous. They are soluble in trifluoroacetic acid and m-cresol at room temperature, and DMF, DMAC, and DMSO at elevated temperature. The aromatic-aliphatic poly(ester-sulfone)s from diphenyl terephthalate are semicrystalline and are soluble only in trifluoroacetic acid. For a given diol, the glass transition temperatures of aromatic-aliphatic poly(ester-sulfone)s increase from phthalate to isophthalate to terephthalate. This is because the flexibility of the benzene ring in the polymer backbone decreases from ortho to meta to para substitution. As a comparison, polyesters without sulfone groups were synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and the diphenyl esters. The poly(ester-sulfone)s have glass transition temperatures 60–80°C higher than the corresponding polyesters without sulfone groups, due to the strong dipolar interactions between sulfone groups. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new poly(arylene ether)s containing heterocyclic units. II.

A series of new poly(arylene ether)s, containing naphthalene, pyridine, and quinoline units have been prepared by solution condensation polymerization. The synthesis involves nucleophilic displacement of aromatic dihalides with aromatic potassium bisphenates in an anhydrous dipolar aprotic solvent at elevated temperatures. The polymers, having inherent viscosity from 0.24 to 1.32 dL/g, were obtained in quantitative yield, have excellent thermal stability as shown by 10% weight loss temperatures in nitrogen and air (above 450 and 430°C, respectively) and high glass transition temperatures (in the range of 150–220°C). The introduction of quinoline moieties in the polymer backbone positively influences the thermal properties, such as high T_g/T_m ratios. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of new cardo poly(bisbenzothiazole)s containing cyclohexylidene units

A new diaminobenzenethiol 1,1-bis(4-amino-3-mercaptophenyl) cyclohexane dihydrochloride (BAMPCH · 2HCl) containing the bulky pendant cyclohexylidene group was synthesized from cyclohexanone in three steps. Its chemical structure was characterized by ¹H NMR, ¹³C NMR, MS, FT-IR and EA. Aromatic poly(bisbenzothiazole)s (PBTs) were prepared from the new monomer and five aromatic dicarboxylic acids by direct polycondensation. The inherent viscosities were in the range of 0.78-2.04 dL/g. These polymers exhibited good solubility and thermal stability. Most of the prepared PBTs were soluble in various polar solvents. The decomposition temperatures at 10% weight loss were in the range of 482-518 °C in nitrogen. X-ray diffractograms of PBTs showed that all polymers were amorphous.     

Synthesis and characterization of new AB-type poly(etherimide)s containing bisphenol moieties

A series of new AB-type poly(etherimide)s having bisphenol-type moiety was prepared by the one-pot polyimidization using triphenylphosphite(TPP) in N-methyl-2-pyrrolidone(NMP)/pyridine solution at 150°C. Complete cyclodehydration was observed in the polymerizations as well as in model reactions. Polymers were obtained with inherent viscosities in the 0.27–0.49 dL/g range. The M_n and M_w/M_n of poly[4-(1,4-phenyleneoxy-1,4-phenylenehexafluoro-isopropylidene-1,4-phenylene)oxyphthalimide] (4d) with η_inh = 0.49 dL/g were 73,400 g/mol and 1.5, respectively. Most polymers could readily be dissolved in common organic solvents such as DMAc, NMP, and m-cresol. The polymer 4d was soluble even in chloroform. These polymers had glass transition temperatures between 205 and 235°C, and 5% weight loss temperatures in the range of 511–532°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3530–3536, 1999     

Synthesis and characterization of new poly(azomethine ester)s having phenylthiourea units

New polyesters having azomethine and phenylthiourea groups in the polymer backbone were synthesized by interfacial polycondensation method. The dihydroxy monomer N-(4-hydroxy-3-methoxybenzal) N′-(4′-hydroxyphenyl)thiourea was condensed with six diacid chlorides: terephthaloyl, isophthaloyl, azeloyl, suberoyl, pimeloyl and adipolyl chlorides. The resulting polyesters were characterized by viscosity, IR, NMR and TGA analysis. The wholly aromatic poly(azomethine ester) derived from terephthaloyl chloride when blended with polyaniline/NH₄OH, polyaniline/HCl and pure polyaniline shows conductance in the range 3.2 × 10⁻³-0.91 × 10⁻¹ S cm⁻¹.     

Synthesis and characterization of new poly(aryl ether)s with isolated fluorophores

Four novel poly(aryl ether)s ( P1 – P4 ) consisting of alternate isolated electron‐transporting (3,3″′‐bis‐trifluoromethyl‐p‐quaterphenyl for P1 , P3 or 3,3″′‐dicyano‐p‐quaterphenyl for P2 , P4 ) and hole‐transporting fluorophores [N‐(2‐ethylhexyl)‐3,6‐bis(styryl)carbazole for P1 , P2 or 9,9‐dihexyl‐2,7‐bis(styryl)fluorene for P3 , P4 ] were synthesized and characterized. These poly(aryl ether)s can be dissolved in organic solvents and exhibited good thermal stability with 5% weight‐loss temperature above 500 °C in nitrogen atmosphere. The photoluminescent (PL) spectra of the films of these polymers showed maximum peaks at around 442–452 nm. The PL spectral results revealed that the emission of polymers was dominated by the fluorophores with longer emissive wavelength via the energy transfer from p‐quaterphenyl to 3,6‐bis(styryl)carbazole or 2,7‐bis(styryl)fluorene segments. Therefore, the p‐quaterphenyl segments function only as the electron‐transporting/hole‐blocking units in these polymers, and the other segments are the emissive centers and hole‐transporting units. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital energy levels of these polymers were measured by cyclic voltammetry. The electron‐donating nitrogen atom on carbazole resulted in the higher HOMO energy levels of P1 and P2 than those of P3 and P4 . The single‐layer light‐emitting diodes (LED) of Al/poly(aryl ether)s ( P1 – P4 )/ITO glass were fabricated. P1 , P2 , and P4 revealed blue electroluminescence, but P3 emitted yellow light as a result of the excimer emission. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2215–2224, 2002     

Synthesis and characterization of new cardo poly(bisbenzoxazole)s containing fluorenylidene unit

A series of poly(bisbenzoxazole)s (PBOs V) containing fluorenylidene unit are prepared from 9,9-bis(3-amino-4-hydroxyphenyl)fluorene (BAHPF) and various aromatic or alkene diacids by direct polycondensation. These polymers exhibit improved solubility and good thermal stability. The decomposition temperatures at 10% weight loss of them are above 500 °C. X-ray diffractograms of PBOs V_1–5 show that all of them are amorphous. The maximum absorption wavelengths of PBOs V_1–5 are blue or red shifted relative to poly(p-phenylene-2,6-benzobisoxazole) (PBO). The bandgaps of PBOs V_1–5 are in the range of 2.48–2.98 eV, which widen the tunable range of the optical bandgap. The results of photoluminescence (PL) emission spectra indicate the energy transportation has happened between the fluorenylidene and benzoxazole ring. The emission wavelengths of PBOs V_1–5 are blue shifted in contrast to PBO and the emission wavelengths of them are in the region of blue or green light, respectively. The PL quantum yields of them are improved due to the introduction of fluorenylidene group. The results of EPR studies show the intrinsic paramagnetic defects in this class of polymers.     

Synthesis and characterization of thianthrene-containing poly(benzoxazole)s

New thioether- and thianthrene-containing poly(benzoxazole)s (PBOs) were synthesized from 4,4′-thiobis[3-chlorobenzoic acid] and thianthrene-2,7- and -2,8-dicarbonyl chlorides with commercially available bis-o-aminophenols. Polymers were prepared via solution polycondensation in poly(phosphoric acid) at 90–200°C. Transparent PBO films were cast directly from polymerization mixtures or m-cresol. The films were flexible and tough. Non-fluorinated PBOs were soluble only in strong acids and AlCl₃/NO₂R systems by forming complexes with the benzoxazole heterocycle Glass transition temperatures ranged from 298–450°C, and thermogravimetric analysis showed good thermal stabilities in both air and nitrogen atmospheres. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ether naphthalimide)s

A series of new poly(ether imide)s containing the naphthalimide moiety were prepared from bis(4-fluorobenzoyl)naphthalimides and several bisphenols by aromatic nucleophilic displacement polymerization. These polyimides had inherent viscosities in the range of 0.31–1.04 dL/g in chloroform and glass transition temperatures of 283.0–341.6°C by differential scanning calorimetry. The onset temperature for 5% weight loss for all the polymers was over 448°C, as assessed by thermogravimetry at a heating rate 10°C/min in nitrogen. In addition, these novel polyimides exhibited good solubility in organic solvents including N-methyl-2-pyrrolidone, N,N-dimethylformamide, N,N-dimethylacetamide, 1,1,2,2-tetrachloroethane and chloroform. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3227–3231, 1999     

Poly(diarylsilmethylene)s,I. Synthesis and characterization

Poly(diarylsilmethylene)s with phenyl or tolyl substituents on Si atoms were synthesized by ring-opening polymerization of corresponding 1,1,3,3-tetraaryl-1,3-disilacyclobutanes, and were characterized by means of DSC, x-ray diffraction and melt viscosity measurements. Three preparative routes including catalytic and noncatalytic polymerization methods were examined to see differences in properties of the resulting polymers. The polymers thus obtained were crystalline and soluble in limited solvents such as diphenyl sulfone at tem-peratures above 250°C. Poly(diphenylsilmethylene) exhibited a melting temperature of about 350°C, whereas those of polymers with tolyl groups were observed in a temperature range between 310 and 330°C. The melt viscosity of the poly(diarylsilmethylene)s was measured to obtain insight into the molecular weights of the polymers, and the results indicated that the molecular weights are modifiable by varying the monomer-to-catalyst ratio when solution polymerization is employed. The DSC and x-ray studies were also carried out with focusing on the melting and crystallization behavior of these polymers. © 1995 John Wiley & Sons, Inc.