Preparation and properties of aromatic–aliphatic copolyamides from aromatic diisocyanates and dicarboxylic acids

Aromatic–aliphatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation from a combination of aromatic diisocyanates, 4,4′-methylenedi(phenyl isocyanate), and 2,4-tolylene diisocyanate, and a mixture of isophthalic acid and aliphatic dicarboxylic acids with 4–10 methylene groups. Reaction conditions, such as solvent, temperature, time, and catalyst were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Glass transition temperatures of the copolyamides were in the range of 131–244°C and varied with combination and composition of the diisocyanates and dicarboxylic acids used. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).     

A facile synthesis of polyamides from aromatic diisocyanates and dicarboxylic acid catalyzed by Lewis acids

Aromatic polyamides were prepared by an AlCl₃ or HCl-catalyzed polymerization of toluene diisocyanate or methylenebis(phenyl isocyanate) with adipic acid at low temperatures (≤100°C) in a short reaction time (3–4 h). The intrinsic viscosity of the polymers was approximately 1.1 dL/g as determined at 25°C with m-cresol as solvent, indicating that the polyamides obtained by this method have relatively high molecular weights. The polymers exhibit high glass transition temperatures and good thermal stability.     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Preparation and properties of new aromatic polyamides from bis(4-aminophenyl) phenylphosphine and aromatic dicarboxylic acids

A new triphenylphosphine-type monomer, bis(4-aminophenyl) phenylphosphine, was synthesized starting from p-bromoaniline and dichlorophenylphosphine. The aromatic polyamides (aramids) containing triphenyphosphine unit in the polymer backbone was prepared by the polycondensation of this diamine with various aromatic diacid chlorides using a low-temperature solution method in N,N-dimethylacetamide (DMAc). The aramids having inherent viscosities of 0.4–0.7 dL/g were obtained in quantitative yields. The polymers were amorphous and soluble in various organic solvents such as DMAc, N-methylpyrrolidone, dimethyl sulfoxide, pyridine, and m-cresol. Transparent, tough, and flexible films were obtained by casting from the DMAc solutions. The glass transition temperatures of the aramids were in the range of 265–310°C, and the 10% weight loss temperatures were above 400°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of polyimides and polyamide-imides from diisocyanates

Polyimides of different structures were synthesized by reaction of 1,4-phenylene diisocyanate (PPDI) and 1,5-naphthalene diisocyanate (NDI) with pyromellitic dianhydride (PMDA) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA). Polyamide-imides were also prepared by reaction of PPDI and NDI with trimellitic anhydride. The optimized condition for polymerization reactions were obtained via the study of model compounds. All polymers and model compounds were characterized by conventional methods. Physical properties of polymers, including thermal behavior, thermal stability, solution viscosity, and solubility behavior, were also studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2245–2250, 1999     

Synthesis and properties of aromatic polyamides derived from 1,6-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,6-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,6-dihydroxynaphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,6-bis(4-nitrophenoxv)naphthalene, followed by hydrazine hydrate/Pd—C reduction. A series of polyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved metal salts such as CaCl₂ or LiBr using triphenyl phosphite and pyridine as condensing agents. The polymers were obtained in quantitative yield with inherent viscosities of 0.78–3.72 dL/g. Most of the polymers were soluble in aprotic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), NMP, and they could be solution-cast into transparent, flexible and tough films. The casting films had tensile strength of 102–175 MPa, elongation at break of 8–42%, and tensile modulus of 2.4–3.8 GPa. The polymers derived from rigid dicarboxylic acids such as terephthalic acid and 4,4′-biphenyldicarboxylic acid exhibited some crystalline characteristics. The glass transition temperatures of the polyamides were in the range of 238–337°C, and their 10% weight loss temperatures were above 487°C in nitrogen and above 438°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyamides derived from 1,2-bis(4-aminophenoxy)benzene and aromatic dicarboxylic acids

1,2-Bis(4-aminophenoxy)benzene was synthesized in two steps by the preparation of 1,2-bis(4-itrophenoxy)benzene from 1,2-dihydroxybenzene (catechol) and p-chloronitrobenzene and subsequent reduction with a 10% Pd-C catalyst and hydrazine hydrate. Aromatic polyamides with an inherent viscosity in the range of 1.08–2.00 dL/g were prepared by the direct polycondensation of this diamine with various aromatic dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Most of the polymers formed were soluble in aprotic solvents such as NMP and N,N-methylacetamide (DMAc), and afforded transparent, flexible, and tough films upon casting from DMAc solutions. Most of the cast films showed obvious yield points in their stress-strain curves and had tensile strength among 64–89 MPa, elongation at break among 5–23%, and initial modulus in 1.7–2.5 GPa. The glass transition temperatures (T_g) of these polymers were in the range of 207–278°C, and the 10% weight loss temperatures were recorded above 475°C in nitrogen and above 452°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of novel aromatic polyamides derived from 1,5-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,5-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,5-dihydroxy-naphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,5-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd? C reduction. A series of polyamides and copolyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids or with mixed dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The polymers having inherent viscosity of 0.81–1.25 dL/g were obtained in quantitative yield. Most of the polymers were generally soluble in aprotic solvent such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, etc. The polymers derived from rigid dicarboxylic acids such as terephthalic acid, naphthalene dicarboxylic acid, and 4,4′-biphenyldicarboxylic acid exhibited crystalline patterns. Glass transition temperatures of polymers were in the range of 230–360°C, and 10% weight loss temperatures in nitrogen and air were above 492 and 470°C, respectively. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyamides derived from 2,6-bis(4-aminophenoxy)naphthalene and various aromatic dicarboxylic acids

2,6-Bis(4-aminophenoxy)naphthalene (2,6-BAPON) was synthesized in two steps from the condensation of 2,6-dihydroxynaphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 2,6-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd—C reduction. A series of new polyamides were synthesized by the direct polycondensation of 2,6-BAPON with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved metal salts such as CaCl₂ or LiCl using triphenyl phosphite and pyridine as condensing agents. The polymers were obtained in quantitative yields with inherent viscosities of 0.62–2.50 dL/g. Most of the polymers were soluble in aprotic dipolar solvents such as N,N-dimethylacetamide (DMAc) and NMP, and they could be solution cast into transparent, flexible, and tough films. The casting films had yield strengths of 84–105 MPa, tensile strengths of 68–95 MPa, elongations at break of 8–36%, and tensile moduli of 1.4–2.1 GPa. The glass transition temperatures of the polyamides were in the range 155–225°C, and their 10% weight loss temperatures were above 505°C in nitrogen and above 474°C in air. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2147–2156, 1997     

Synthesis and properties of aromatic polyamides derived from 1,7-bis(4-aminophenoxy)naphthalene and various aromatic dicarboxylic acids

A series of novel bis(phenoxy)naphthalene-containing polyamides having inherent viscosity up to 2.02 dL/g were synthesized by the direct polycondensation of the diamine 1,7-bis(4-aminophenoxy)naphthalene with various aromatic dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Most of the polyamides could be readily dissolved in polar aprotic solvents such as N,N-dimethylacetamide and NMP, and could be solution-cast into transparent, flexible, and tough films. These polymers had glass transition temperatures in the range of 139–263°C, and 10% weight loss temperatures in nitrogen and air were above 499 and 484°C, respectively. © 1996 John Wiley & Sons, Inc.     

Preparation and properties of silicon containing copolyamides

Copolyamides containing siloxane moieties in main chain were prepared by a melt polycondensation with 1,3-bis(3-aminopropyl)tetramethyldisiloxane (E), hexamethylenediamine (N6), and adipic acid (6). Glass transition temperature (T_g), cold crystallization temperature (T_cc), and melting temperature (T_m) were measured by differential thermal analysis (DTA). The depression of T_m for copolyamide was fitted by the Flory curve. Melting peak remarkably broadens with increasing E6 component in copolyamide. The change of T_g was fitted by the Gibbs and Dimarzio's equation in which the number of flexible bond is considered. The difference between T_g and T_cc increased with increasing E6 component. These DTA studies suggest that the crystallization of N66 component in copolyamide is hindered by the bulky siloxane moiety, while the micro-Brownian motion of amorphous segment is promoted by the flexible siloxane bond. Tensile strength and Young's modulus decreased with increasing E6 component. The solubility in various solvents increased with increasing E6 component. Permeability of oxygen and nitrogen increased with an increase of temperature and E6 component. The separation coefficient of oxygen to nitrogen rapidly increased near 50 mol% of E6 concentration and then leveled out above 70 mol%. The contact angle with water and methylene iodide increased with an introduction of the siloxane moiety into polymer chain.     

Preparation of aromatic copolyamides containing regularly placed 1,6-hexamethylenediamine units

Copolyamides based on poly(m-phenylene isophthalamide) and poly-(p-phenylene terephthalamide), to which 1,6-diaminohexane units were regularly inserted every 3 or 5 phenylene monomer units, were synthesized. The copolymers were obtained by condensation of individually prepared diamino- and dicarboxylic-building blocks via the Yamazaki–;Higashi reaction. Solubility of the copolyamides are discussed in relation with the structure. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2379–2386, 1997     

Synthesis and properties of aromatic polyamide-benzoxazoles from trimethylsilyl-substituted 2,4-diaminophenol and aromatic dicarboxylic acid chlorides

Aromatic poly(o-hydroxy amide)s having inherent viscosities of 0.6–2.2 dL/g were readily synthesized by the low-temperature solution polycondensation of N,N′,O-tris(trimethylsilyl)-substituted 2,4-diaminophenol with aromatic dicarboxylic acid chlorides in various organic solvents. The viscosity values were much higher than those of the polymers obtained by a conventional method using parent 2,4-diaminophenol. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s at 280°C under vacuum afforded the corresponding aromatic polyamide-benzoxazoles. Most of the poly(o-hydroxy amide)s dissolved readily in amide-type solvents, whereas the polyamide-benzoxazoles were quite insoluble in organic solvents. The polyamide-benzoxazoles, which gave yellow, transparent, and tough films, had glass transition temperatures of 260–300°C and were stable up to 400°C in air.     

Synthesis and properties of new soluble aromatic polybenzoxazoles from 4,4′-diamino-3,3′-dihydroxytriphenylamines and aromatic dicarboxylic acids

Two new triphenylamine-based bis (o-aminophenol) monomers, 4,4′-diamino-3,3′-dihydroxytriphenylamines, were successfully synthesized by the cesium fluoride-mediated condensation of 2-(benzyloxy)-4-fluoronitrobenzene with aniline derivatives, followed by simultaneous deprotection and reduction. Aromatic polybenzoxazoles having inherent viscosities of 0.58–1.05 dL/g were obtained by the low-temperature solution polycondensation of the bis(aminophenol)s with various aromatic dicarboxylic acid chlorides and the subsequent thermal cyclodehydration of the resultant poly(hydroxyamide)s. All the polybenzoxazoles were amorphous, and most of them were soluble in organic solvents such as m-cresol and o-chlorophenol. Flexible and tough films of polybenzoxazoles could be cast from the DMAc solutions of some aromatic poly(hydroxyamide)s, followed by thermal cyclodehydration. The glass transition temperatures and 10% weight loss temperatures of the polybenzoxazoles under nitrogen were in the range of 262–327 and 610–640°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1987–1994, 1998     

Preparation of bislupinine esters of dicarboxylic acids

Conclusions A number of bislupinine derivatives and their methiodides were synthesized.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 946–947, April, 1972.