Synthesis and characterization of mono- and bis(pentafluorosulfur)diacetylene

The synthesis of novel, high density, diacetylene monomers has been achieved by the preparation of mono- and bis(pentafluorosulfur) diacetylene. The derivatives are readily prepared by the addition of pentafluorosulfur bromide (SF₅Br) to diacetylene (C₄H₂) and subsequent dehydrobromination. Details of the synthesis and properties of these compounds are discussed.     

Synthesis of nitrile-terminated potential molecular electronic devices

Several potential molecular devices have been synthesized consisting of oligo(phenylene ethynylene) (OPE) backbones containing a terminal nitrile group alligator clip as a means of attachment to a metal surface. The synthesis of four new nitrile-containing OPEs is discussed, including an improved synthesis of an intermediate used in our prior production of OPEs containing acetate-protected thiol alligator clips.     

Polymerization of diacetylene phospholipid bilayers on solid substrate: influence of the film deposition temperature

Micropatterned phospholipid bilayers on solid substrates offer an attractive platform for various applications, such as high throughput drug screening. We have previously developed a photopolymerization-based methodology for generating micropatterned bilayers composed of polymerized and fluid lipid bilayers. Lithographic photopolymerization of a diacetylene-containing phospholipid (DiynePC) allowed facile fabrication of compartmentalized arrays of fluid lipid membranes. Herein, we report on a key experimental parameter that significantly influences the homogeneity and quality of the fabricated polymeric bilayers, namely the temperature at which monolayers of monomeric DiynePC were formed on the water surface and transferred onto solid substrates by the Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) technique. Using fluorescence microscopy and atomic force microscopy, it was found that polymerized bilayers were homogeneous, if bilayers of DiynePC were prepared below the triple point temperature (ca. 20 degrees C) of the monolayer, where a direct transition from the gaseous state to the liquid condensed state occurred. Bilayers prepared above this temperature had a markedly increased number of crack-like line defects. The differences were attributed to the domain structures in the monolayer that were transferred from the water surface to the substrate. Domain size, rather than the molecular packing in each domain, was concluded to play a critical role in the formation of defects. The spontaneous curvature and area changes of bilayers were postulated to cause destabilization and detachment of the films from the substrate upon polymerization. Our present results highlight the importance of controlling the domain structures for the homogeneity of polymerized bilayers required in technological applications.     

Polymerization and characterization of polyfunctional amphiphilic diacetylenes

Amphiphilic diacetylenes of the type HC?C? (CH₂)_n? C?C? C?C? (CH₂)₈? COOH (n=6 and 12) were synthesized. The solid-state polymerization of the bulk crystals, mono-layers on the gas-water interface, and multilayers were investigated. The diacetylene moieties underwent polymerization upon irradiation by UV or γ-rays, showing different polymerizability depending on the material form. The polymerization of the terminal acetylene groups was not observed. Enhanced polymerizability and stability of the monolayers on subphases containing LiOH are explained by a proposed model of the monolayers. © 1995 John Wiley & Sons, Inc.     

α-Haloacetylene and diacetylene alcohols

Results of investigations of α-haloacetylene and diacetylene alcohols in reactions with various reagents are discussed. Frequently the reactions do not stop at monoadduct formation but are followed by intramolecular cyclization or by rearrangement providing polyfunctional compounds.     

Surface characterization of functional poly(diacetylene) and poly(butadiene) mono- and multilayers

The surface properties of Langmuir-Blodgett mono- and multilayers of a variety of amphiphilic poly(diacetylene)s and poly(butadiene)s were investigated by contact angle, streaming potential, ellipsometry, and X-ray photoelectron spectroscopic (XPS) measurements. Captive air and octane angles varied between approximately 60° and 105° for hydrophobicx-layers and 31° to 46° for hydrophilic surfaces depending on the particular head group, whereas advancing angles determined via the vertical plate method are considerably higher. Negative streaming potentials were obtained for all surfaces. Positively charged monolayers yielded less negative- potential values (–28 mV) than negatively charged (–52 mV) or hydrophobic (–50 mV) layers. Ellipsometry measurements yielded an average layer thickness of 27±6 Å for 3 to 11 layers. X-ray photoelectron spectroscopy results qualitatively confirmed the expected composition. All of the samples, which were handled and stored in air after deposition and polymerization, were surface oxidized.Dedicated to Prof. Dr. F. H. Müller.     

Polymerization of branched thiophene monomers and optoelectronic properties of materials

Bithiophene monomers ( 5HBTh and 5HBThO ) were prepared by the Suzuki coupling reaction of 3‐thienylboronic acid with 2‐bromo‐5‐hexylthiophene and 2‐bromo‐5‐hexylthiophene‐1,1‐dioxide. The oxidation polymerization mediated by vanadium catalyst gave poly(5HBTh) and oligo(5HBThO) . 5HBThO bearing thiophene‐1,1‐dioxide had an absorption maximum at longer wavelength region than 5HBTh due to the intramolecular charge transfer interaction, while peak maxima blue shifted and their difference became small after the polymerization. Terthiophene monomers ( 5″HTTh , 3,5″DHTTh , and 4,5″DHTTh ) were subsequently prepared by the mono‐bromination of 5HBTh followed by the Suzuki coupling reaction with boronic acid derivatives. The vanadium‐catalyzed oxidation polymerization of 5″HTTh and 4,5″DHTTh afforded soluble polymers and the absorption maximum wavelengths red shifted after the polymerization in contrast to bithiophene monomers and 3,5″DHTTh . The absorption and emission spectra of poly(5″DHTTh) red shifted when compared with those of poly(4,5″DHTTh) . Thus the presence and position of n‐hexyl chain influenced the monomer polymerizability and optoelectronic properties of branched polythiophenes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3034–3044, 2009     

Synthesis and properties of diacetylene azides

A three-stage method was developed for the synthesis of diacetylene azides from diacetylene alcohols prepared by Cadiot-Chodkiewicz reaction. By their bromination the corresponding diacetylene bromides were obtained whose azidation resulted in the target diacetylene azides. The attempt was performed to prepare azides of triacetylene series, but the low stability of the synthesized triacetylene alcohols prevented their conversion into the corresponding bromides.     

Polymerization of (o-methylphenyl)acetylene and polymer characterization

(o-Methylphenyl)acetylene polymerized with high yields in the presence of W and Mo catalysts. W catalysts were more active than the corresponding Mo catalysts. The weight-average molecular weight of the polymer formed with W(CO)₆–CCl₄–hv reached 8 × 10⁵, being higher than the maximum value (ca. 2 × 10⁵) for poly(phenylacetylene). The polymer had the structure $\rlap{--} [{\rm CH} \hbox{=\hskip-1pt=} {\rm C}(o - {\rm CH}_3 {\rm C}_6 {\rm H}_4 )\rlap{--} ]_n $. The stereochemical structure of the main chain could be determined by ¹³C-NMR; the cis content varied in a range of 41–61% depending on the polymerization conditions. The present polymer was thermally more stable than poly(phenylacetylene) according to thermogravimetric analysis. Interestingly, this polymer possessed deeper color than poly(phenylacetylene), and showed a fairly strong absorption in the visible region.     

Modification of nitrile-terminated biphenylthiol self-assembled monolayers by electron irradiation and related applications

Here we describe the behavior of self-assembled monolayers (SAMs) of 4'-cyanobiphenyl-4-thiol (CBPT) on Au(111) upon electron irradiation. Under such a treatment, the aromatic framework of CBPT SAMs is laterally cross-linked while the nitrile groups, located at the SAM-ambience interface, are reduced to active amine moieties which can be used as docking sites for the coupling of other species. This makes CBPT monolayers as a promising system for conventional and chemical lithography as well as for nanofabrication. Along these lines, we demonstrate the preparation of complex polymer brushes, patterning of the underlying substrate, and fabrication of molecule-thin, free-standing membranes on the basis of CBPT SAMs. The balance between the application-favorable processes and defragmentation in these films is studied in detail, and comparison to the well-established (for the relevant applications) system of 4'-nitrobiphenyl-4-thiols is performed. Taking CBPT SAMs as a model system, the effect of the energy of the primary electrons on the extent of the chemical transformation and cross-linking in substituted aromatic SAMs is investigated.     

Reaction of azolethiones with diacetylene

Reactions of 2,3-dihydro-1H-benzimidazole-2-thione, 2,3-dihydro-1H-1,2,4-triazole-3-thione, 4-amino-5-phenyl-3,4-dihydro-2H-1,2,4-triazole, and 6-aminopurine-2-thiol with diacetylene in DMSO gave the corresponding 1-(azolylsulfanyl)but-1-en-3-ynes having Z configuration of the double bond.     

Addition of xanthate ions to diacetylene

Conclusions S-(1-Buten-3-ynyl) alkylxanthates were obtained by reacting diacetylene with CS₂ in an alcohol-KOH system.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2808–2811, December, 1982.     

Solid-state polymerization of a cyclic diacetylene

Large polymeric single crystals of a unique ring-bridged polymer have been produced by the solid-state polymerization of a cyclic diacetylene (o,o′-diacetylenyldiphenyl glutarate). These crystals are of high thermal stability, metallic in appearance with an asbestos-like texture, infusible, and insoluble. Single-crystal x-ray diffraction investigation indicates that the polymer is monoclinic (probable space group C2/c or Cc) with a unit cell containing four monomer units of dimensions α = 20.8 Å, b = 8.0 Å, c = 9.7 Å, and β = 106°. Infrared spectra eliminate the previously suggested possibility that the solid-state reactivity of the above monomer corresponds to either reaction of the carbonyl function with the acetylenic bond or the cleavage of the ester linkage. Diffraction, dichroism, and Raman spectral studies indicate instead that the reaction proceeds by 1,4-addition polymerization at the diacetylene group to produce a trans–trans polymer of structure where the curved lines represent the di-(o-phenyl)-glutarate linkages which are on opposite sides of the chain for adjacent monomer units.     

Synthesis of hydroxyamines of diacetylene series

Conclusions We synthesized some previously unknown types of polyfunctionally substituted compounds of the diacetylene series by the condensation of 4-hydroxy-3-alkyl (or dialkyl)amino-1-butynes with various bromoacetylenes under the conditions of the Cadiot — Chodkiewicz reaction.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1088–1091, May, 1971.     

Spectroscopic characterization of ambers and amber-like materials

Longitudinal acoustic (LA) phonon of Baltic, Dominican and Kuji ambers, amber-like rosin and synthetic acrylic resin has been investigated by means of Brillouin light scattering (BLS) at room temperature. We observed a pair of LA phonon peaks and a broad quasi-elastic scattering peak in backscattering spectra from ambers. The LA phonon frequencies were found to be 16.97–17.11 GHz for Baltic ambers, 17.23–17.68 GHz for Dominican ambers and 17.70–17.97 GHz for Kuji ambers, respectively. We would like to point out that the LA phonon frequency can be a good physical quantity to specify the amber-producing district. We also present a correlation between the BLS spectrum and infrared absorption spectrum of ambers and amber-like materials.