Synthesis and efficiency of a spherical macroporous epoxy-polyamide chelating resin for preconcentrating and separating trace noble metal ions

The determination of noble metals in various materials usually requires their preconcentration and separation from other elements. In spite of the improvements in analytical instrumentation and the development of new analytical techniques such as ICP-MS, which are capable of detecting metal ions at ppt levels, the interference caused by the sample matrix still exists and is perhaps the most serious problem, making a pre-determination enrichment step necessary. Thus, the search for efficient preconcentration and separation methods is essential. A series of chelating resins that can selectively adsorb noble metal ions from aqueous solutions have been described. Functional groups, such as salicylaldoxime and thiosemicarbazide have been incorporated in cross-linked polymers or porous silica gel. These resins have very high selectivity for one or several types of noble metal ion. However, desorption of noble metals from these resins is usually difficult. Hence, the development of an adsorbent from which noble metals can be easily desorbed is needed. In this paper, a new spherical macroporous epoxy-polyamide chelating resin that met this requirement was synthesized by one step reaction. The synthesis of the resin was safe, rapid and more simple and economical than many report adsorbents. Meanwhile, the resin showed more advantages: better acid and alkali resistance; higher adsorption capacity and lower preconcentration concentrations. A resin column procedure combined with inductively coupled plasma atomic emission spectrometry (ICP-AES) for the determination of trace Rh(III), Ru(III) and Ir(IV) in real samples was established.     

Evaluation of metal fractions in river sediments and waters: application of chelation chromatography-differential pulse anodic stripping voltammetry

The ability of chelation chromatography in combination with differential pulse anodic stripping voltammetry (DPASV) to provide a simple, fast and reliable way of dealing with interionic interferences, competitive complexations, re-adsorption of released metal ions and sorption of spiking metal ions by organic/inorganic materials in the complex matrixes of real natural samples has been critically examined. The technique is based on the selective complexation of target metal fractions on some novel sorbents which are polymeric chelating resins doped on stationary supports (Whatman No. 1 paper and silica gel). The usual complications of leaching of the resin and/or the chelating ligand and colloid retention on the sorption bed at any stage of separation were largely obviated with these sorbents under the operational conditions of metal sorption. A detailed study on the application of such sorbents to the differentiation of ionic (free), labile (ionic plus weakly complexed) and bound (strongly complexed) metal fractions present in local river-sediment and water samples was carried out. Chelating resin-impregnated paper (CRIP) and chelating resin-immobilized silica gel column (CRISC) methods of chromatographic separation of analyte trace metals in combination with the follow-up 'standard addition' procedure of the DPASV technique were employed. A modest attempt has been made to formulate a speciation (fractionation) scheme for metal contents present in river-sediments and waters on the basis of selective retention of ionic and labile fractions on complexing resins.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

Extraction chromatography of thorium ion by solid phase impregnated resins containing bi-functional organic extractants</p> </p>

Summary Macroporous methyl methacrylate polymeric resin (XAD-7) was investigated incorporating both acidic organophosphorous extractant (cyanex-301) and one neutral extractant from the followings: dibenzo 18 crown 6 (DB18C6), 18 crown 6 (18C6) and 15 crown 5 (15C5). The sorption behavior of the solvent impregnated resin (SIR) towards thorium ion, including batch equilibrium, and kinetic operation are described. Different factors affecting the uptake of metal ions and hence, the separation efficiency of the impregnated resins were investigated. The maximum uptakes of Th⁴⁺ were found to be 62.9, 66.7 and 92.6% for DB18C6, 18C6 and 15C5, respectively. Synergistic extraction of various CE towards thorium ion was tested with cyanex-301 to enhance the sorption capacity as well as the selective separation efficiency. A relatively high capacity of the chelating resin towards tetravalent thorium was found. The capacities of the co-impregnated resins were found to be 2.11, 2.42 and 3.85 mmol/g for DB18C6, 18C6 and 15C5, respectively. The impregnated resin containing cyanex-301 and 15C5 can be utilized for selective separation and pre-concentration of thorium ion from nitrate medium in the presence of several interfering metal ions.</p> </p>     

Simultaneous preconcentration of uranium(VI) and thorium(IV) from aqueous solutions using a chelating calix[4]arene anchored chloromethylated polystyrene solid phase

A new chelating polymeric sorbent is developed using Merrifield chloromethylated resin anchored with calix[4]arene-o-vanillinsemicarbazone for simultaneous separation and solid phase extractive preconcentration of U(VI) and Th(IV). The “upper-rim” functionalized calix[4]arene-o-vanillinsemicarbazone was covalently linked to Merrifield resin and characterized by FT-IR and elemental analysis. The synthesized chelating polymeric sorbent shows superior binding affinity towards U(VI) and Th(IV) under selective pH conditions. Various physico-chemical parameters that influence the quantitative extraction of metal ions were optimized. The optimum pH range and flow rates for U(VI) and Th(IV) were 6.0-7.0 and 1.0-4.0 ml min⁻¹ and 3.5-4.5 and 1.5-4.0 ml min⁻¹, respectively. The total sorption capacity found for U(VI) and Th(IV) was 48734 and 41175 μg g⁻¹, respectively. Interference studies carried out in the presence of diverse ions and electrolyte species showed quantitative analyte recovery (98-98.5%) with lower limits of detection, 6.14 and 4.29 μg l⁻¹ and high preconcentration factors, 143 and 153 for U(VI) and Th(IV), respectively. The uptake and stripping of these metal ions on the resin were fast, indicating a better accessibility of the metal ions towards the chelating sites. The analytical applicability of the synthesized polymeric sorbent was tested with some synthetic mixtures for the separation of U(VI) and Th(IV) from each other and also from La(III), Cu(II) and Pb(II) by varying the pH and sequential acidic elution. The validity of the proposed method was checked by analyzing these metal ions in natural water samples, monazite sand and standard geological materials.     

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.     

Extraction of metal ions by N-phenyl-, N-methyl-, and N-unsubstituted hydroxamic acid resins

Procedures are described for preparing macroreticular chelating resins with hydroxamic acid or N-methylhydroxamic acid functional groups. The chelating properties of the resins are compared with each other and with an N-phenylhydroxamic acid resin reported earlier. The extraction of 19 metal ions was studied as a function of pH for the N-methylhydroxamic acid resin. Several analytical applications of this resin have been demonstrated including the purification of chemical reagents, concentration of trace metal ions, and chromatographic separation of metal-ion mixtures.     

Preparation and characterization of chelating resins loaded with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol for preconcentration of rare earth elements

 Chelating resins prepared by sorption of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol (5-BrPADAP) on macroporous resins (Amberlite XAD-4 and XAD-7) were characterized. The adsorption properties (amount of chelating agent adsorbed per gram of resin, sorption kinetics, retention capacity, etc.) and the thermodynamic quantities of each adsorption process were determined. The retention of some rare earth elements (e.g. Er, Yb and Lu) on these chelating resins was studied in order to preconcentrate them for their determination by X-Ray fluorescence spectrometry. Received: 7 September 1995/Revised: 2 January 1996/Accepted: 10 January 1996     

蛇笼树脂交换量的测定

本文介绍了蛇笼树脂的结构及其离子阻滞作用机理,提出了离子阻滞交换量的概念.研究了残余阴离子交换量、残余阳离子交换量、全阴离子交换量、离子阻滞交换量和全阳离子交换量的测定及计算方法,测定了美国的Retardion 11A-8及本文合成的9种蛇笼树脂的交换量.     

Identification of selective ion-exchange resin for fluoride sorption

The defluoridation capacity (DC) of a chelating resin, namely Indion FR 10 (IND), and Ceralite IRA 400 (CER), an anion-exchange resin, were compared under various equilibrating conditions for the identification of selective sorbent. The results showed that chelating resin is more selective than an anion-exchange resin for fluoride removal. The fluoride sorption was reasonably explained using Freundlich and Langmuir isotherms. The surface morphology of resins before and after fluoride sorption was observed using scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FTIR) was used for the determination of functional groups responsible for fluoride sorption. Various thermodynamic parameters such as DeltaG0, DeltaH0, DeltaS0, and Ea have been calculated to understand the nature of sorption. The sorption kinetic mechanism was studied with reaction-based and diffusion-based models. The sorption process was found to be controlled by pseudo-second-order and particle diffusion models. The performance of the resins studied has been tested with field samples collected from a fluoride-endemic area.     

Evaluation of sorption and desorption characteristics of cadmium, lead and zinc on Amberlite IRC-718 iminodiacetate chelating ion exchanger

A chelating type ion exchange resin (Amberlite IRC-718), containing iminodiacetate groups as active sites, has been characterized regarding the sorption and subsequent elution of Cd, Zn and Pb, aiming to metal preconcentration from solution samples of different origins. The methodology developed is based on off-line operation employing mini columns made of the sorbent. The eluted metals were determined by flame atomic absorption spectrometry. The effect of column conditioning, influent pH and flow rate during the sorption step, and the nature of the acid medium employed for desorption of the retained metals were investigated. Working (breakthrough) and total capacities were measured under dynamic operating conditions and the results compared with those obtained with Chelex-100, a resin extensively employed for analytical preconcentration. Structural information on the complexation of metals by the chelating groups was obtained by Fourier Transform infrared spectrometry. The analytical response of the Amberlite sorbent was assessed for the analysis of water samples and digestates of marine sediments.     

更迭镧系元素螯合物稳定常数序列改进离子交换法分离锕-镧系元素的研究

本文提出了以双(2-氨基乙基)醚为骨架的氨羧螯合剂类作为选择性螯合剂,更迭镧系元素的螯合物稳定常数序列,改进用阳离子交换法分离锕-镧系混合物的新设想。报道了该类络合剂DETAPN,N,N′-三乙酸-N′-3-丙酸-双-2-氨基乙基醚的合成方法、阴离子质子常数、它和镧系元素的络合物稳定常数。讨论了该离子交换法在分离锕-镧系元素上应用的可能性。     

STUDY ON THE SYNTHESIS OF POLYSTYRENESUPPORTED MACROCYCLIC MERCAPTAL CHELATING RESIN AND ITS PROPERTIES

Chelating resin with macrocyclic mercaptal group supported on macroporous polystyrene beads was synthesized, which showed good selectivity to Hg~(2+): its complexing capacity amounted to 30—60 mg Hg~(2+)/g resin, two orders of magnitude greater than for other metal ions such as Ca~(2+), Zn~(2+), Cd~(2+), Pb~(2+) etc. This resin could restore the activity of urease which had been deactivated by poisoning with Hg~(2+). Its restoring power was far better than that of the mercapto-resin and common anionic exchange resins. It showed some promising use as an oral polymeric detoxifying drug for mercury poisoning.     

Chelating resin-impregnated paper chromatography, applications to trace element collection of ferrous and ferric ions, and determination by differential pulse anodic stripping voltammetry

An ion-exchange approach to the preparation of chelating resin is demonstrated whereby a typical sulfonated chelating agent, 7-iodo-8-hydroxy quinoline-5-sulfonic acid, is immobilized as counterions on a piperazinium polyelectrolyte matrix. The resulting chelate forming resin has been used to effect the selective separation of ferrous as well as ferric ion from a known mixture containing other trace elements without any complication of the leaching of either chelating ligand or resin from the stationary support. The chelating resin-impregnated paper chromatographic technique followed with differential pulse anodic stripping analysis is described for the preconcentration, separation, and recovery of divalent and trivalent ions of iron from the various heavy metals in aqueous phases. The combination of chelation and paper chromatography involves a differential migration procedure which provides a technique for the separation of analyte ions quantitatively without any interference from the complex matrices.     

Solid phase extractive preconcentration of uranium(VI) using quinoline-8-ol anchored chloromethylated polymeric resin beads

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with quinoline-8-ol (HQ). The modified polymeric resin was characterized by FT-IR spectroscopy and elemental analysis. The HQ anchored resin showed superior binding affinity for U(VI) over Th(IV) and La(III). The influence of various physicochemical parameters on the recovery of U(VI) were optimized by both static and dynamic methods. The phase exchange kinetic studies performed for U(VI) revealed that <5 min was sufficient for reaching equilibrium metal ion sorption. The maximum sorption capacity of HQ anchored resin for U(VI) was found to be 120.30 mg g⁻¹ of resin which is higher than other solid phase extraction sorbents reported so far excepting N,N-dibutyl, N′-benzoyl thiourea sorbed Amberlite XAD-16. The developed HQ anchored polymeric resin is highly selective as none of the extraneous species were found to have any deleterious effect. Solid phase extraction (SPE) studies performed using HQ anchored polymeric resin offered enrichment factor of 100 and the lowest concentration below which recoveries become non-quantitative is 5 μg l⁻¹. The accuracy of the developed SPE method in conjunction with Arsenazo III procedure was tested by analyzing marine sediment (MESS-3) and soil (IAEA–Soil 7) reference materials. Furthermore, the above procedure has been successfully employed for the analysis of real soil and sediment samples.     

Chelating ion-exchangers containing N-substituted hydroxylamine functional groups: Part I. N-aroylphenylhydroxylamines

Chelating ion exchangers containing N-carbonylphenylhydroxylamine functional groups have been synthesized and their exchange behaviour with copper, cobalt, iron, vanadium and uranium investigated. Of the two polymers described, a linear oxime-carbonyl polymer exhibited chelating capacity as a function of pH analogous to the chelates formed by BPHA. An oxime-carbonyl polymer based on polyethyleneimine had high capacities for the metal ions studied, but the principal mode of reaction was by electron donation from nitrogen atoms. The absence of co-ion in metal ion capacity studies indicates the possibility of formation of 1:2 and 1:3 metal complexes with the resin. Separations of iron(II)-iron(III) and vanadium-iron appear possible.     

A new sorbent for uranium extraction: ethylenediamino tris(methylenephosphonic) acid grafted on polystyrene resin

A new chelating polymeric sorbent has been developed using polystyrene resin grafted with ethylenediamino tris(methylenephosphonic) acid. After characterisation by FTIR and elementary analysis, the new grafted resin has been investigated in liquid–solid extraction of uranium(VI). The influence of analytical parameters including pH, amount of resin, metal ion concentration, sample volume and ionic strength were investigated on the recovery of U(VI). Adsorption kinetic and isotherm studies were also carried out to understand the nature of the sorption of uranium(VI) by the resin. The total sorption capacity was found to be 41.76 mg/g under optimum conditions. The total desorption of the sorbed uranium ions was successfully performed with 0.1 M ammonium carbonate. Further, the effect of temperature was realized and the thermodynamic parameters were calculated.     

Metal Ions Uptake by Chelating Resin Derived from o-Substituted Benzoic Acid and its Synthesis,Characterization and Properties

Summary: Chelating resin [AFM] was synthesized by condensation of Anthranilic acid, Formaldehyde with m-Cresol. The chelating resin was characterized by FTIR Spectra, Elemental Analysis and SEM Photographs. The thermal behavior of the resin was characterized by TGA. The thermodynamic parameters such as Activation Energy (E_a), Order of decomposition (n), Entropy of decomposition (S*), Enthalpy (H*) and Free energy (G*) were calculated by Coats and Redfern method using TGA graph. The chelating behaviour of the prepared resin was studied out with using some metal ions [Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II)]. The sorption capacities of metal ions is found in the following order, Pb(II) < Zn(II) < Cd(II) < Cu(II) < Ni(II). The rate of half exchange was rapid t_1/2 < 20 min for lead ion. The separation of binary mixtures [Cu(II) and Zn(II) in brass and Pb(II) and Cd(II)] was successfully carried out using K_d value.     

The use of amphoteric ion exchange resin for the selective separation of cadmium from other radioelements present in neutron irradiated biological materials

A new method for the selective radiochemical separation of cadmium from other elements, present in biological materials, using amphoteric ion exchange resin Retardion 11A8 has been elaborated. Cadmium can be taken up by the resin either as anionic chloride complexes or cationic ammine complexes, depending on the composition of the eluent, exploiting both cation and anion exchange functions of the ion exchanger. The conditions in which Cd is quantitatively retained and eluted from Retardion 11A8 were established. The method of selective isolation of cadmium was further used for the determination of Cd in three biological certified reference materials by neutron activation analysis. Analytical results obtained with the use of the proposed separation procedure show good agreement with the certified values.