Optical properties of CdS nanoclusters: effects of size,stoichiometry and alloying with Ag2S

The optical absorption and photoluminescence (PL) properties of nanosize CdS clusters synthesized by chemical bath deposition technique using precursor chemicals of high purity CdCl₂, thiourea and NH₄Cl are presented. The crystallite sizes were controlled by the reaction rate, concentration of the reactants of the chemical bath and thickness of the film. Relative to bulk crystals, the band gap (E_g∼2.5 eV) of CdS clusters is significantly blue-shifted with decreasing cluster size. CdS nanoclusters present a mixed hexagonal/cubic structure, which indicates that CdS formation occurs primarily via “ion-to-ion” process. Scanning electron microscopic studies of CdS films revealed that the films are composed of domains, which are formed from the coalescence of smaller crystallites. The PL excitation band is interpreted as an excitation of CdS molecular levels in the interior of the cluster. Results on Ag₂S alloying with the CdS nanoclusters show that surface related states of one material can be excited through states of a different interior material.     

Temperature induced size selective synthesis of hybrid Cds/pepsin nanocrystals and their photoluminescence investigation

There is growing interest in materials chemistry for taking advantage of the physical and chemical properties of biomolecules in the development of next generation nanoscale materials for opto-electronic applications. A biomimetic approach to materials synthesis offers the possibility of controlling size, shape, crystal structure, orientation, and organization. The great progress has been made in the control that can be exerted over optical materials synthesis using biomolecules (protein, nucleic acid)/mineral interfaces as templates for directed synthesis. We have synthesized the CdS nanocrystals using pepsin by biomimetic technique at four different set temperatures. X-ray diffraction (XRD) and small angle X-ray scattering (SAXS) results showed that we are able to tune the size and distribution profile just by tuning the reaction (Rx) temperature and goes towards excitonic Bhor radius (2.5 nm) at low temperature (4 °C). The narrow absorption peak at 260 nm from Cd²⁺-pepsin complex dominates and indicates the size dispersion of the modified CdS nanoparticles are fairly monodisperse. Effective mass approximation (EMA) shows large blue-shift (~1 eV) in the band gap for the cubic phase from bulk hexagonal CdS. The photoluminescence (PL) and photoluminescence excitation (PLE) spectra are dominated by a strong and narrow band-edge emission tunable in the blue region indicating a narrow size distribution. The reduction in PL efficiency is observed when the Rx temperature increases however no change in PLE spectra and temporal profiles of the band-edge PL is observed. At 4 °C, high emission efficiency with shift of PL spectrum in the violet region is observed for 1.7 nm size CdS quantum dots (QDs). Presence of pepsin has slowed the PL decay which is of the order of 100 μs.     

Optical properties of silylene-biphenylene copolymer films

We have measured absorption, photoluminescence, and photoluminescence excitation spectra, and the photoluminescence time response for films of silylene-biphenylene copolymer, ((C₆H₄)₂(Si(CH₃)₂)_m)_n with m=1,2,4, and 6. The excitation spectra clearly reveal that the lowest absorption band in each copolymer consists of two bands, i.e., a band at 4.7 eV and a band of which energy depends on m. Since the latter band is absent in the copolymer with m=1, the former band is attributed to the lowest π−π* transition in biphenylene subunits. The latter band is attributed to the lowest σ−σ* transition in the silylene subunits, considering its dependence on m. In contrast to the result for solution, the peak energy of photoluminescence band is independent of m. The band has a Stokes shift of more than 1 eV and a large band width of 0.5 eV. The time responses of photoluminescence intensity consist of more than two decay components and the intensity decays more slowly at smaller energy. The large Stokes shift is explained as due to excimer formation between biphenylene subunits. In order to explain the energy dependence of time responses, energy migration is discussed.     

Competition in the carrier capture between InGaAs/AlGaAs quantum dots and deep point defects

The presence of an extrinsic photoluminescence (PL) band peaked at 1.356 eV at low temperature is observed, on a large number of self-assembled InAs and In_0.5Ga_0.5As quantum dot (QD) structures, when exciting just below the GaAs absorption edge. A detailed optical characterization allows us to attribute the 1.356 eV PL band to the radiative transition between the conduction band and the doubly ionized Cu _Ga acceptor in GaAs. A striking common feature is observed in all investigated samples, namely a resonant quenching of the QD-PL when exciting on the excited level of this deep defect. Moreover, the photoluminescence excitation (PLE) spectrum of the 1.356 eV emission turns out to be almost specular to the QD PLE. This correlation between the PL efficiency of the QDs and the Cu centers evidences a competition in the carrier capture arising from a resonant coupling between the excited level of the defect and the electronic states of the wetting layer on which the QDs nucleate. The estimated Cu concentration is compatible with a contamination during the epitaxial growth. Received 13 November 2001 / Received in final form 28 May 2002 Published online 19 July 2002     

Synthesis and optical properties of nanocrystalline ZnO powders prepared by a direct thermal decomposition route

This paper reports the synthesis and optical properties of nanocrystalline ZnO powders with crystallite sizes of 32.5 (±1.4)–43.4 (±0.4) nm prepared by a direct thermal decomposition of zinc acetate at the temperatures of 400, 500, 600, and 700°C for 4 h. The structure of the prepared samples was studied by XRD and FTIR spectroscopy, confirming the formation of wurtzite structure. The morphology of the samples revealed by SEM was affected by the thermal decomposition temperature, causing the formations of both nanoparticles and nanorods with different size and shape in the samples. The synthesized powders exhibited the UV absorption below 400 nm (3.10 eV) with a well defined absorption peak at around 285 nm (4.35 eV). The estimated direct bandgaps were obtained to be 3.19, 3.16, 3.14, and 3.13 eV for the ZnO samples thermally decomposed at 400, 500, 600, and 700°C, respectively. All the samples exhibited room-temperature photoluminescence (PL) showing a strong UV emission band at ∼395 nm (3.14 eV), a weak blue band at ∼420 nm (2.95 eV), a blue–green band at ∼485 nm (2.56 eV), and a very weak green band at ∼529 nm (2.35 eV). The mechanisms responsible for photoluminescence of the samples are discussed.     

Photoluminescence of CdS nanoparticles embedded in a starch matrix

CdS nanoparticles were synthesized by precipitation in aqueous solution using starch as the capping molecule, and the effect of the pH of the solution on the optical absorption, photoluminescence, and size of the nanoparticles was studied. Absorption spectra, obtained by photoacoustic spectroscopy, indicated that the band gap energy of the crystalline nanoparticles decreased from 2.68 eV down to 2.48 eV by increasing the pH of the solution from 9 up to 14. The X-ray diffraction analysis revealed that the CdS nanoparticles were of zinc blende structure, and that the particle size increased from 1.35 nm up to 2.45 nm with increasing pH. In addition, temperature-dependent photoluminescence (PL) measurements of the capped material showed a blue-shift of the emission peak for temperatures higher than 150 K, indicating the influence of starch on the formation of defect levels on the surface of the CdS nanoparticles.     

Cadmium sulfide quantum dots stabilized by castor oil and ricinoleic acid

Castor oil and ricinoleic acid (an isolate of castor oil) are environmentally friendly bio-based organic surfactants that have been used as capping agents to prepare nearly spherical cadmium sulfide quantum dots (QDs) at 230, 250 and 280 °C. The prepared quantum dots were characterized by Ultra violet–visible (UV–vis), Photoluminescence (PL), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and X-ray diffraction (XRD) giving an overall CdS QDs average size of 5.14±0.39 nm. The broad XRD pattern and crystal lattice fringes in the HRTEM images showed a hexagonal phase composition of the CdS QDs. The calculated/estimated average size of the prepared castor oil capped CdS QDs for various techniques were 4.64 nm (TEM), 4.65 nm (EMA), 5.35 nm (UV–vis) and 6.46 nm (XRD). For ricinoleic acid capped CdS QDs, the average sizes were 5.56 nm (TEM), 4.78 nm (EMA), 5.52 nm (UV–vis) and 8.21 nm (XRD). Optical properties of CdS QDs showed a change of band gap energy from its bulk band gap of 2.42–2.82 eV due to quantum size confinement effect for temperature range of 230–280 °C. Similarly, a blue shift was observed in the photoluminescence spectra. Scanning electron microscope (SEM) observations show that the as-synthesized CdS QDs structures are spherical in shape. Fourier transform infra-red (FTIR) studies confirms the formation of castor oil and ricinoleic acid capped CdS QDs.     

Electronic excitations and luminescence of SrMgF4 single crystals

The electronic and crystal structures of SrMgF₄ single crystals grown by the Bridgman method have been investigated. The undoped SrMgF₄ single crystals have been studied using low-temperature (T = 10 K) time-resolved fluorescence optical and vacuum ultraviolet spectroscopy under selective excitation by synchrotron radiation (3.7–36.0 eV). Based on the measured reflectivity spectra and calculated spectra of the optical constants, the following parameters of the electronic structure have been determined for the first time: the minimum energy of interband transitions E _g = 12.55 eV, the position of the first exciton peak E _n = 1 = 11.37 eV, the position of the maximum of the “exciton” luminescence excitation band at 10.7 eV, and the position of the fundamental absorption edge at 10.3 eV. It has been found that photoluminescence excitation occurs predominantly in the region of the low-energy fundamental absorption edge of the crystal and that, at energies above E _g , the energy transfer from the matrix to luminescence centers is inefficient. The exciton migration is the main excitation channel of photoluminescence bands at 2.6–3.3 and 3.3–4.2 eV. The direct photoexcitation is characteristic of photoluminescence from defects at 1.8–2.6 and 4.2–5.5 eV.     

Optical studies on a coherent InGaN/GaN layer

Photoluminescence (PL), photoluminescence excitation (PLE) and selective excitation (SE-PL) studies were performed in an attempt to identify the origin of the emission bands in a pseudomorphic In_0.05Ga_0.95N/GaN film. Besides the InGaN near-band-edge PL emission centred at 3.25 eV an additional blue band centred at 2.74 eV was observed. The lower energy PL peak is characterized by an energy separation between absorption and emission–the Stokes’ shift–(500 meV) much larger than expected. A systematic PLE and selective excitation analysis has shown that the PL peak at 2.74 eV is related to an absorption band observed below the InGaN band gap. We propose the blue emission and its related absorption band are associated to defect levels, which can be formed inside either the InGaN or GaN band gap.     

Photoinduced Degradation of the Optical Properties of Colloidal Ag<Subscript>2</Subscript>S and CdS Quantum Dots Passivated by Thioglycolic Acid

The results of studying degradation of the optical properties of colloidal Ag₂S and CdS quantum dots (QDs) 2.6–3.2 nm in size passivated by thioglycolic acid (TGA) are presented. The photoluminescence intensity of colloidal Ag₂S QDs has been found to decrease under laser irradiation at a wavelength of 445 nm, beginning with the effective power of 10 mW. The observed effect is interpreted as a photochemical reaction of formation of new nonradiative-recombination channels in Ag₂S QDs upon excitation. It is established for colloidal CdS QDs passivated by TGA that a decrease in the optical density in the entire absorption spectrum and the luminescence intensity is accompanied by precipitation of the colloidal particles in a cell and related to photodegradation of the passivating shell.     

Characterization of luminescent chromophore obtained from silica spheres

Blue light emitting chromophores have been separated from silica spheres by soaking them into acetone for 120 days. The luminescent chromophores were not obtained from other solvents, including ether, methanol, ethanol, 2-propanol, chloroform and tetrahydrofuran. According to the Fourier transform infrared spectrum, the luminescent material is composed of C–OH, –CH₂, –CH₃, C=O, and Si–O–Si. UV–visible absorption peak of the chromophore is at 5.17 eV (240 nm). Field emission scanning electron microscope images show small cracks on the surface of aged spheres. The luminescence peak was at 2.81 eV (441 nm) for excitation energy between 3.88 and 3.35 eV and slightly shifted toward lower energy for excitation energy lower than 3.35 eV. The deconvoluted luminescent spectrum shows two emission bands at 3.08 and 2.74 eV, which are well-matched the oxygen deficient center model. Compared to the absorption peak (5.17 eV) and the emission peak (2.81 eV), large Stokes shift (2.36 eV) is observed.     

CdS quantum dots for measurement of the size-dependent optical properties of thiol capping

Abstract  

The optical- and size-dependent properties of CdS quantum dots (QDs) were analyzed in the presence and absence of different capping agents in aqueous medium. The QDs have been characterized by UV–Vis, Photoluminescence, Fourier-transform infrared spectroscopy, X-ray diffraction, and Fluorescence lifetime measurements. QDs with the presence of thiol group in cubic phase with small grain size were observed in XRD and decrease in particle size of the same with increase in band gap is deduced through UV–Vis and XRD studies. The FT-IR spectrum confirms the interaction of thiol group with CdS. Fluorescence lifetime of capped QDs was higher compared to uncapped CdS QDs. The surface passivation of thiol group on CdS is shown in photoluminescence studies.     

The studies of Ge quantum dots on strained Si0.7Ge0.3 layer by photoluminescence and deep level transient spectroscopy

Systematic studies of Ge quantum dots (QDs) grown on strained Si_0.3Ge_0.7 layer have been carried out by photoluminescence (PL) and deep level transient spectroscopy (DLTS). In PL measurements, two peaks around 0.7 eV are distinguished, which are assigned to two types of QDs observed by atomic force microscopy (AFM). Large blueshifts of the PL peaks from small QDs with the increase of excitation power are observed and attributed to the band bending effects typical for type-II band alignment. From DLTS measurements, the energy levels of holes in both types of QDs are derived, which shift with the change of the number of holes in QDs due to their charge energy. By comparing results from PL and DLTS measurements, further understanding of band alignment with the increase of the number of excitons in QDs is deduced.     

CdS量子点的酿酒酵母仿生合成及光谱表征

以酿酒酵母为载体,常温下利用仿生法成功合成了CdS量子点。荧光发射光谱、紫外吸收光谱以及荧光显微镜照片证明,该方法合成的CdS量子点的荧光发射峰位置在443nm,在紫外灯下能发蓝绿色荧光。透射电子显微镜(TEM)表征结果表明,该仿生法合成的CdS量子点为六方纤锌矿结构。以荧光发射和紫外吸收光谱为性能指标,考察了酿酒酵母生长时期、Cd2+的反应浓度以及反应时间等条件对合成CdS量子点的影响。当酿酒酵母处于生长稳定期初期时,与浓度为0.5mmol.L-1的Cd2+共培养24h后所合成的CdS量子点荧光最强。实验中观察到,换液培养可有效提高酿酒酵母合成CdS量子点的产量。     

Effect on photophysical properties of colloidal ZnS quantum dots by doping with cobalt, copper, and cobalt�Ccopper mixtures

Colloidal ZnS quantum dots (QDs) are prepared by passing H₂S gas through a solution of Zn(CH₃COO)₂ in acetonitrile. Photophysical properties are investigated using UV?CVisible and photoluminescence (PL) spectroscopy. The spectrum shows an absorption shoulder at 271 nm representing a band gap of 4.6 eV. The doping of ZnS QDs with Co, Cu, and a mixture of Co and Cu not only increased the band gap to 0.2 eV but also turns these otherwise colorless QDs to blue in color due to cobalt, and green due to Cu. The observed emission in the visible region suggests that the dopants may have induced additional excited states to the ZnS QDs. This absorbance in the visible region can be utilized in the optoelectronic applications.     

Mn掺杂Zn-In-S量子点的制备及发光性质研究

制备了Mn掺杂Zn-In-S量子点并研究了Zn/In的量比和反应温度对其发光性质的影响。在Mn掺杂的Zn-In-S量子点的发光谱中观测到一个600 nm发光带。通过改变Zn/In的量比,掺杂量子点的吸收带隙可从3.76 e V(330 nm)调谐到2.82 e V(440 nm),但600 nm发光峰的波长只有略微移动。这些掺杂量子点的最长荧光寿命为2.14 ms。当反应温度从200℃增加到230℃时,掺杂量子点的发光强度增加并达到最大值;而继续升高温度至260℃时,发光强度迅速减弱。此外,测量了Mn掺杂Zn-In-S量子点的变温发光光谱。发现随着温度的升高,发光峰位发生蓝移,发光强度明显下降。分析认为,Mn掺杂Zn-In-S量子点的600 nm发光来自于Mn2+离子的4T1和6A1之间的辐射复合。     

Assembly,characterization, and photocatalytic activities of TiO<Subscript>2</Subscript> nanotubes/CdS quantum dots nanocomposites

The semiconductor quantum dots (QDs) can be very efficient to tune the response of photocatalyst of TiO₂ to visible light. In this study, CdS QDs formed in situ with about 8 nm have been successfully deposited onto the surfaces of TiO₂ nanotubes (TNTs) to form TNTs/CdS QDs nanocomposites by use of a simple bifunctional organic linker, thiolactic acid. The diffuse reflectance spectroscopy (DRS) spectra of as prepared samples showed that the absorption edge of the TNTs/CdS composite is extended to visible range, with absorption edge at 530 nm. The photocatalytic activity and stability of TNTs/CdS were also evaluated for the photodegradation of rhodamine B. The results showed that when TNTs/CdS QDs was used, photocatalytic degradation of RhB under visible light irradiation reached 91.6%, higher than 45.4 and 30.5% for P25 and TNTs, respectively. This study indicated that the TNTs/CdS QDs nanocomposites were superior catalysts for photodegradation under visible light irradiation compared with TNTs and P25 samples, which may find wide application as a powerful photocatalyst in environmental field.     

Optimisation of the CBD CdS deposition parameters for ZnO/CdS/CuGaSe2/Mo solar cells

We present an optimisation of our recipe for the CdS chemical bath deposition process as applied to solar cells based on polycrystalline CuGaSe₂ (CGSe) absorber layers prepared in two stages by physical vapour deposition. We investigate the influence of the ammonia (NH₃) and the thiourea (H₂NCSNH₂) concentration, both being constituents of the chemical bath deposition (CBD) solution, at a deposition temperature of 80 °C on the microstructural and optical properties of CdS layers and on ZnO/CdS/CuGaSe₂/Mo device parameters. The composition of the CdS layers and their thickness were determined using X-ray Fluorescence Analysis. Transmission and reflection measurements performed at 300 K were used for the calculation of absorption and optical band gap energy (E_g). The E_g values of the films varied from 2.41 to 2.46 eV depending on deposition conditions. Cubic phase of the as-grown layers was identified by X-ray diffraction analysis. An improvement in the investigated solar cells efficiency was achieved when the ammonia concentration was increased and the thiourea concentration was reduced, compared to the previously used standard HMI recipe. The influence of the CBD CdS preparation recipe on the ZnO/CdS/CuGaSe₂/Mo electrical and photoelectrical properties is discussed.     

Photo- and thermostimulated processes in α-Al2O3

We reported on the recombination processes determined by the release of electrons from defects connected with the dosimetric 430 K thermostimulated luminescence (TSL) peak as well as with the 260 K TSL peak. These TSL peaks appear in thermochemically reduced α-Al₂O₃ crystals containing hydrogen and emission of these TSL peaks corresponds to luminescence of the F-center. The X-ray exposure or UV excitation in the absorption band of F-centers at 6.0 eV of reduced α-Al₂O₃ crystals doped with acceptor impurities results in the appearance of a broad anisotropic complex absorption band in the spectral region 2.5–3.5 eV and in the appearance of a predominant TSL peak at 430 K. Above 430 K the above-mentioned broad absorption band disappears. Optical bleaching of the 2.5–3.5 eV band is accompanied by the disappearance of the 430 K TSL peak and results in F-center emission. The X-ray or UV excitation of reduced α-Al₂O₃ crystals with donor-type impurities results in the appearance of an anisotropic absorption band at 4.2 eV and the appearance of a dominant TSL peak at 260 K. Above 260 K the 4.2 eV absorption disappears and photostimulated luminescence (PSL) of the F-center recombination luminescence in the 4.2 eV region is no longer observed. Optical bleaching of the 4.2 eV absorption band is accompanied by the disappearance of the 260 K TSL peak. The successful use of reduced α-Al₂O₃ in dosimetry needs the optimization of the concentration of all components (acceptors, hydrogen, intrinsic defects) involved in the thermo- and photostimulated processes.     

Nanocrystal and interface defects related photoluminescence in silicon-rich Al2O3 films

In this study, silicon nanocrystal-rich Al₂O₃ film has been prepared by co-sputtering a silicon and alumina composite target and subsequent annealing in N₂ atmosphere. The microstructure of the film has been characterized by infrared (IR) absorption, Raman spectra and UV-absorption spectra. Typical nanocrystal and interface defects related photoluminescence with the photon energy of 1.54 (IR band) and 1.69 eV (R band) has been observed by PL spectrum analysis. A post-annealing process in oxygen atmosphere has been carried out to clarify the emission mechanism. Despite the red shift of the spectra, enhanced emission of the 1.69 eV band together with the weak emission phenomenon of the 1.54 eV band has been found after the post-annealing. The R band is discussed to originate from silicon nanocrystal interface defects. The IR band is concluded to be a coupling effect between electronic and vibrational emissions.