Molecular insight into the interaction between IFABP and PA by using MM-PBSA and alanine scanning methods

The molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) method combined with alanine-scanning mutagenesis is a very important tool for rational drug design. In this study, molecular dynamics (MD) and MM-PBSA were applied to calculate the binding free energy between the rat intestinal fatty acid binding protein (IFABP) and palmitic acid (PA) to gain insight to the interaction details. Equally spaced snapshots along the trajectory were chosen to perform the binding free energy calculation, which yields a result highly consistent with experimental value with a deviation of 0.4 kcal/mol. Computational alanine scanning was performed on the same set of snapshots by mutating the residues in IFABP to alanine and recomputing the DeltaDeltaG(binding). By postprocessing a single trajectory of the wild-type complex, the average unsigned error of our calculated DeltaDeltaG(binding) is below 1.5 kcal/mol for most of the alanine mutations of the noncharged residues (67% in total). To further investigate some particular mutants, three additional dynamical simulations of IFABP Arg126Ala, Arg106Ala, and Arg106Gln mutants were conducted. Recalculated binding free energies are well consistent with the experimental data. Moreover, the ambiguous role of Arg106 caused by the free energy change of the opposite sign when it is mutated to alanine and glutamine respectively is clarified both structurally and energetically. Typically, this can be attributed to the partial electrostatic compensation mainly from Arg56 and the obvious entropy gain in Arg106Ala mutant while not in Arg106Gln mutant. The presented structural model of IFABP-PA complex could be used to guide future studies.     

用分子模拟方法研究HIV-1整合酶与咖啡酰基类抑制剂的相互作用

用分子对接和分子动力学(MD)模拟方法研究了一类咖啡酰基和没食子酰基类HIV-1整合酶抑制剂与整合酶之间的相互作用模式, 结果表明该类抑制剂分子上的两个侧链基团(咖啡酰基或没食子酰基)与整合酶的DDE基序之间的相互作用对抑制整合酶活性起到关键作用. 当侧链基团为没食子酰基时, 可以提高该类抑制剂与整合酶的结合能力. 采用线性相互作用能方法(LIE)计算了该类抑制剂与整合酶之间的结合自由能, 预测值与实验值相吻合, 均方根偏差RMSD为1.39 kJ•mol^-1, 以上结果可为基于结构的HIV-1整合酶抑制剂设计提供有用的信息.     

Further development and validation of empirical scoring functions for structure-based binding affinity prediction

New empirical scoring functions have been developed to estimate the binding affinity of a given protein-ligand complex with known three-dimensional structure. These scoring functions include terms accounting for van der Waals interaction, hydrogen bonding, deformation penalty, and hydrophobic effect. A special feature is that three different algorithms have been implemented to calculate the hydrophobic effect term, which results in three parallel scoring functions. All three scoring functions are calibrated through multivariate regression analysis of a set of 200 protein-ligand complexes and they reproduce the binding free energies of the entire training set with standard deviations of 2.2 kcal/mol, 2.1 kcal/mol, and 2.0 kcal/mol, respectively. These three scoring functions are further combined into a consensus scoring function, X-CSCORE. When tested on an independent set of 30 protein-ligand complexes, X-CSCORE is able to predict their binding free energies with a standard deviation of 2.2 kcal/mol. The potential application of X-CSCORE to molecular docking is also investigated. Our results show that this consensus scoring function improves the docking accuracy considerably when compared to the conventional force field computation used for molecular docking.     

Use of 3D QSAR to investigate the mode of binding of pyrazinones to HIV-1 RT

Abstract  

Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) based on the docked conformation were performed for 24 pyrazinone derivatives. All compounds were docked into the wild-type HIV-1 RT binding pocket and the lowest-energy docked configurations were used to construct the 3D QSAR models. The CoMFA and CoMSIA models enable good prediction of inhibition by the pyrazinones, with r_\textcv² r_{\text{cv}}^{2}  = 0.703 and 0.735. Results obtained from CoMFA and CoMSIA based on the docking conformation of the pyrazinones are, therefore, powerful means of elucidating the mode of binding of pyrazinones and suggesting the design of new potent NNRTIs.     

Use of 3D QSAR to investigate the mode of binding of pyrazinones to HIV-1 RT

Abstract  Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) based on the docked conformation were performed for 24 pyrazinone derivatives. All compounds were docked into the wild-type HIV-1 RT binding pocket and the lowest-energy docked configurations were used to construct the 3D QSAR models. The CoMFA and CoMSIA models enable good prediction of inhibition by the pyrazinones, with  = 0.703 and 0.735. Results obtained from CoMFA and CoMSIA based on the docking conformation of the pyrazinones are, therefore, powerful means of elucidating the mode of binding of pyrazinones and suggesting the design of new potent NNRTIs. Graphical Abstract        

QM/MM-PBSA method to estimate free energies for reactions in proteins

We have developed a method to estimate free energies of reactions in proteins, called QM/MM-PBSA. It estimates the internal energy of the reactive site by quantum mechanical (QM) calculations, whereas bonded, electrostatic, and van der Waals interactions with the surrounding protein are calculated at the molecular mechanics (MM) level. The electrostatic part of the solvation energy of the reactant and the product is estimated by solving the Poisson-Boltzmann (PB) equation, and the nonpolar part of the solvation energy is estimated from the change in solvent-accessible surface area (SA). Finally, the change in entropy is estimated from the vibrational frequencies. We test this method for five proton-transfer reactions in the active sites of [Ni,Fe] hydrogenase and copper nitrite reductase. We show that QM/MM-PBSA reproduces the results of a strict QM/MM free-energy perturbation method with a mean absolute deviation (MAD) of 8-10 kJ/mol if snapshots from molecular dynamics simulations are used and 4-14 kJ/mol if a single QM/MM structure is used. This is appreciably better than the original QM/MM results or if the QM energies are supplemented with a point-charge model, a self-consistent reaction field, or a PB model of the protein and the solvent, which give MADs of 22-36 kJ/mol for the same test set.     

CoMFA 3D-QSAR analysis of HIV-1 RT nonnucleoside inhibitors, TIBO derivatives based on docking conformation and alignment

HIV-1 RT is one of the key enzymes in the duplication of HIV-1. Inhibitors of HIV-1 RT are classified as nonnucleoside RT inhibitors (NNRTIs) and nucleoside analogues. NNRTIs bind in a region not associated with the active site of the enzyme. Within the NNRTI category, there is a set of inhibitors commonly referred to as TIBO inhibitors. Fifty TIBO inhibitors were used in the work to build 3-D QSAR models. The two known crystal structures of complexes are used to investigate and validate the docking protocol. The results show that the docking simulations reproduce the crystal complexes very well with RMSDs of approximately 1 A and approximately 0.6 A for 1REV and 1COU, respectively. The alignment of molecules and "active" conformation selection are the key to a successful 3D-QSAR model by CoMFA. The flexible docking (Autodock3) was used on determination of "active" conformation and molecular alignment, and CoMFA and CoMSIA were used to develop 3D-QSAR models of 50 TIBOs in the work. The 3D-QSAR models demonstrate a good ability to predict the activity of studied compounds (r2 = 0.972, 0.944, q2 = 0.704, 0.776). It is shown that the steric and electrostatic properties predicted by CoMFA contours can be related to the binding structure of the complex. The results demonstrate that the combination of ligand-based and receptor-based modeling is a powerful approach to build 3D-QSAR models.     

Thermodynamic integration to predict host-guest binding affinities

An alchemical free energy method with explicit solvent molecular dynamics simulations was applied as part of the blind prediction contest SAMPL3 to calculate binding free energies for seven guests to an acyclic cucurbit-[n]uril host. The predictions included determination of protonation states for both host and guests, docking pose generation, and binding free energy calculations using thermodynamic integration. We found a root mean square error (RMSE) of 3.6 kcal mol(-1) from the reference experimental results, with an R(2) correlation of 0.51. The agreement with experiment for the largest contributor to this error, guest 6, is improved by 1.7 kcal mol(-1) when a periodicity-induced free energy correction is applied. The corrections for the other ligands were significantly smaller, and altogether the RMSE was reduced by 0.4 kcal mol(-1). We link properties of the host-guest systems during simulation to errors in the computed free energies. Overall, we show that charged host-guest systems studied here, initialized in unconfirmed docking poses, present a challenge to accurate alchemical simulation methods.     

Investigation of MM-PBSA rescoring of docking poses

Target-based virtual screening is increasingly used to generate leads for targets for which high quality three-dimensional (3D) structures are available. To allow large molecular databases to be screened rapidly, a tiered scoring scheme is often employed whereby a simple scoring function is used as a fast filter of the entire database and a more rigorous and time-consuming scoring function is used to rescore the top hits to produce the final list of ranked compounds. Molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) approaches are currently thought to be quite effective at incorporating implicit solvation into the estimation of ligand binding free energies. In this paper, the ability of a high-throughput MM-PBSA rescoring function to discriminate between correct and incorrect docking poses is investigated in detail. Various initial scoring functions are used to generate docked poses for a subset of the CCDC/Astex test set and to dock one set of actives/inactives from the DUD data set. The effectiveness of each of these initial scoring functions is discussed. Overall, the ability of the MM-PBSA rescoring function to (i) regenerate the set of X-ray complexes when docking the bound conformation of the ligand, (ii) regenerate the X-ray complexes when docking conformationally expanded databases for each ligand which include "conformation decoys" of the ligand, and (iii) enrich known actives in a virtual screen for the mineralocorticoid receptor in the presence of "ligand decoys" is assessed. While a pharmacophore-based molecular docking approach, PhDock, is used to carry out the docking, the results are expected to be general to use with any docking method.     

Protein-ligand binding free energy estimation using molecular mechanics and continuum electrostatics. Application to HIV-1 protease inhibitors

A method is proposed for the estimation of absolute binding free energy of interaction between proteins and ligands. Conformational sampling of the protein-ligand complex is performed by molecular dynamics (MD) in vacuo and the solvent effect is calculated a posteriori by solving the Poisson or the Poisson-Boltzmann equation for selected frames of the trajectory. The binding free energy is written as a linear combination of the buried surface upon complexation, SASbur, the electrostatic interaction energy between the ligand and the protein, Eelec, and the difference of the solvation free energies of the complex and the isolated ligand and protein, deltaGsolv. The method uses the buried surface upon complexation to account for the non-polar contribution to the binding free energy because it is less sensitive to the details of the structure than the van der Waals interaction energy. The parameters of the method are developed for a training set of 16 HIV-1 protease-inhibitor complexes of known 3D structure. A correlation coefficient of 0.91 was obtained with an unsigned mean error of 0.8 kcal/mol. When applied to a set of 25 HIV-1 protease-inhibitor complexes of unknown 3D structures, the method provides a satisfactory correlation between the calculated binding free energy and the experimental pIC5o without reparametrization.     

De novo design based identification of potential HIV-1 integrase inhibitors: A pharmacoinformatics study

In the present study, pharmacoinformatics paradigms include receptor-based de novo design, virtual screening through molecular docking and molecular dynamics (MD) simulation are implemented to identify novel and promising HIV-1 integrase inhibitors. The de novodrug/ligand/molecule design is a powerful and effective approach to design a large number of novel and structurally diverse compounds with the required pharmacological profiles. A crystal structure of HIV-1 integrase bound with standard inhibitor BI-224436 is used and a set of 80,000 compounds through the de novo approach in LigBuilder is designed. Initially, a number of criteria including molecular docking, in-silico toxicity and pharmacokinetics profile assessments are implied to reduce the chemical space. Finally, four de novo designed molecules are proposed as potential HIV-1 integrase inhibitors based on comparative analyses. Notably, strong binding interactions have been identified between a few newly identified catalytic amino acid residues and proposed HIV-1 integrase inhibitors. For evaluation of the dynamic stability of the protein-ligand complexes, a number of parameters are explored from the 100 ns MD simulation study. The MD simulation study suggested that proposed molecules efficiently retained their molecular interaction and structural integrity inside the HIV-1 integrase. The binding free energy is calculated through the Molecular Mechanics Poisson-Boltzmann Surface Area (MM-PBSA) approach for all complexes and it also explains their thermodynamic stability. Hence, proposed molecules through de novo design might be critical to inhibiting the HIV-1 integrase.     

用分子对接方法预测HIV-1整合酶与金精三羧酸抑制剂的相互作用

用分子对接方法(Docking)研究了HIV-1整合酶与其抑制剂金精三羧酸的结合过程.为弄清金属离子在结合中所起的作用,选择含有一个Mg+2或不含Mg+2的两种不同的整合酶受体分别与金精三羧酸对接.结果表明, Mg+2对稳定配体与受体的结合起了重要作用. 金精三羧酸配体与含有一个金属Mg+2的整合酶受体对接,最优结合自由能为-45.19 kJ/mol. 当Mg+2失去后,整合酶的活性中心构象将发生变化,使金精三羧酸抑制剂与整合酶的结合自由能(-24.35 kJ/mol)明显增加. 预测了未知的HIV-1整合酶与其抑制剂金精三羧酸的复合物结构, 并可对基于结构的抗HIV-1整合酶的药物设计提供重要信息.     

Protein/ligand binding free energies calculated with quantum mechanics/molecular mechanics

The calculation of binding affinities for flexible ligands has hitherto required the availability of reliable molecular mechanics parameters for the ligands, a restriction that can in principle be lifted by using a mixed quantum mechanics/molecular mechanics (QM/MM) representation in which the ligand is treated quantum mechanically. The feasibility of this approach is evaluated here, combining QM/MM with the Poisson-Boltzmann/surface area model of continuum solvation and testing the method on a set of 47 benzamidine derivatives binding to trypsin. The experimental range of the absolute binding energy (DeltaG = -3.9 to -7.6 kcal/mol) is reproduced well, with a root-mean-square (RMS) error of 1.2 kcal/mol. When QM/MM is applied without reoptimization to the very different ligands of FK506 binding protein the RMS error is only 0.7 kcal/mol. The results show that QM/MM is a promising new avenue for automated docking and scoring of flexible ligands. Suggestions are made for further improvements in accuracy.     

MM-PBSA free energy analysis of endo-1,4-xylanase II (XynII)-substrate complexes: binding of the reactive sugar in a skew boat and chair conformation

The binding of xylotetraose in different conformations to the active site of endo-1,4-beta-xylanase II (XynII) from Trichoderma reesei was studied using molecular dynamics (MD) simulations and free energy analyses employing the MM-PBSA (Molecular Mechanics-Poisson-Boltzmann Surface Area) method. MD simulations of 1 ns were done for the substrate xylotetraose having the reactive sugar, which is bound in the -1 subsite of XynII in the 4C1 (chair) and 2So (skew boat) ground state conformations, and for the transition state of the XynII catalysed hydrolysis of the beta-glycosidic linkage. According to the simulations and free energy analysis, XynII binds the substrate with the -1 sugar in the 2So conformation 59.8 kJ mol(-1) tighter than the substrate with the sugar in the 4C1 conformation. The reactive 2So conformation resembles closely the reaction transition state and has the breaking glycosidic bond in a pseudo-axial orientation ready for facile bond cleavage. The transition state was calculated to be bound 77.1 kJ mol(-1) tighter than the 4C1 ground state conformation. The molecular mechanical interaction energy between the enzyme and the reactive pyranoside unit at the -1 subsite was 75.7 kJ mol(-1) more favorable for the binding of the 2So conformation than the 2C1 conformation, explaining the clearly tighter binding of the reactive structure The results of this study indicate that in the Michaelis complex XynII, a member of the family 11 xylanase, the substrate is bound in a skew boat conformation and in the catalytic reaction, the -1 sugar proceeds from the 4C1 conformation through 2So to the transition state with the -1 sugar in the 2,5B conformation.     

Rapid estimation of relative protein-ligand binding affinities using a high-throughput version of MM-PBSA

By employing a modified protocol of the Molecular Mechanics with Poisson-Boltzmann Surface Area (MM-PBSA) methodology we substantially decrease the required computation time for calculating relative estimates of protein-ligand binding affinities. The modified method uses a generalized Born implicit solvation model during molecular dynamics to enhance conformational sampling as well as a very efficient Poisson-Boltzmann solver and a computational design based on a distributed-computing paradigm. This construction allows for reduction of the computational cost of the calculations by roughly 2 orders of magnitude compared to the traditional formulation of MM-PBSA. With this high-throughput version of MM-PBSA we show that one can produce efficient physics-based estimates of relative binding free energies with reasonable correlation to experimental data and a total computation time that is sufficiently low such that an industrially relevant throughput can be realized given currently accessible computing resources. We demonstrate this approach by performing a comparison of different MM-PBSA implementations on a set of 18 ligands for the protein target urokinase.