反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

核壳型聚苯胺/钛酸钡的结构及其电流变性能

用改进的溶胶-凝胶法制备了核壳型聚苯胺/钛酸钡复合微粉,通过TEM及FT-IR分析表征了其形貌及微观结构,用复合微粉与氯化石蜡油配制成无水电流变(ER)液,研究其不同膜厚核壳粒子的电流变性能.研究结果表明,聚苯胺/钛酸钡复合粒子配置成的电流变液的电流变性能较纯聚苯胺的为强;钛酸钡的涂层厚度对复合粒子电流变性能有重要影响;并在d=20 nm时获得最佳电流变性能.     

二氧化硅/聚苯乙烯单分散性核/壳复合球的制备

采用无皂乳液聚合包覆 ,制备了二氧化硅 聚苯乙烯单分散核 壳 (SiO2 PS)复合颗粒 ,包覆层厚度达到 10 0nm .选择 80～ 2 5 0nm二氧化硅粒径作为核颗粒 .为提高包覆效率 ,二氧化硅颗粒先用偶联剂甲基丙烯酰 (3 三甲氧基硅烷 )丙酯 (MPS)进行不同程度的表面改性 .控制MPS的结合率和单体的初始浓度可提高包覆效率 ,同时得到了单分散性复合颗粒 ,用透射电镜 (TEM)观察复合粒子的核 壳形态 .用动态光散射法 (DLS)测量表明所得复合颗粒具有单分散性 .     

光化学合成Au核@Pd壳复合纳米粒子及其表征

在PEG-丙酮溶液体系中, 采用紫外光辐射还原Au(Ⅲ), Pd(Ⅱ)离子混合物和以Au晶种为核、紫外光辐射还原Pd(Ⅱ)使其沉积在Au晶种表面上这两种方法, 合成了Au核@Pd壳复合纳米粒子. 通过改变Au(Ⅲ)离子或Au晶种对Pd(Ⅱ)离子的摩尔比调节复合粒子的尺寸和Pd壳厚度, 分别获得了直径范围为5.6~4.6 nm和4.6~6.2 nm的复合粒子. 利用UV-Vis吸收光谱、TEM、HR-TEM和XPS等表征手段, 证明了合成的纳米粒子为核-壳复合结构. 研究了Au@Pd纳米粒子的直径随溶液中Au(Ⅲ)/Pd(Ⅱ)摩尔比的改变而变化的规律; 对Au核向Pd壳的供电子作用以及复合粒子的光化学形成机理进行了讨论.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

核-壳结构Au-Pt纳米粒子的光谱表征和电催化性能

用化学还原法合成了核-壳结构Au-Pt纳米粒子.紫外可见光谱(UV-Vis)、电化学循环伏安(CV)和透射电子显微镜(TEM)表征结果指出，所合成的核-壳结构Au-Pt纳米粒子为球形，平均直径为27 nm.以CO为分子探针，结合透射红外光谱研究，发现CO以孪生吸附态形式(COT)吸附在Au-Pt纳米粒子上，在2110 cm－1和2063 cm－1附近分别给出对称和反对称红外吸收峰. CV研究结果指出Au-Pt/GC电极对CO的氧化有较高的催化活性，起始氧化电位较本体Pt电极提前了0.45 V，峰电位提前了0.11 V.     

SiO2／LaF3：Eu3＋核壳结构发光粒子的制备与表征

采用简单的液相法合成了SiO2/LaF3:Eu3 核壳结构发光粒子,并对其结构及发光性能进行了表征.XRD分析表明包覆层LaF3:Eu3 为立方晶相结构,红外光谱表明SiO2颗粒表面有柠檬酸的修饰,电镜照片表明合成了球形的核-壳结构的复合粒子,包覆层厚度为10～20 nm,光谱测试表明核-壳复合粒子与纯的LaF3:Eu3 具有相同的发光性能,均以589 nm附近的5D0-7F1磁偶极跃迁为最强发射峰,说明Eu3 在LaF3基质中占据的格位相同.     

聚苯乙烯/Ag核壳结构纳米微粒的制备及表征

用种子乳液聚合法合成了聚苯乙烯（PS）/Ag复合纳米粒子,进一步利用分步聚合技术实现了聚甲基丙烯酸甲酯(PMMA)在微球表面功能化,分别用TEM、XRD、TG-DTA及FT-IR对其结构和形貌进行了表征,并考察了其摩擦学性能.结果表明,在所选择的实验条件下,合成了以Ag纳米微粒为核,PS、PMMA为壳层的核壳结构复合纳米微球,其中Ag纳米核平均粒径约12 nm,复合微球粒径约25 nm,颗粒较均匀并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能.     

乳液聚合制备纳米银/聚苯乙烯核壳复合粒子

采用乳液聚合方法制备出纳米银／聚苯乙烯核壳复合粒子，并借助TEM、XPS、FTIR分析了其微观结构。研究了纳米银粒子存在下苯乙烯聚合反应转化率-时间关系，分析了纳米银／聚苯乙烯核壳复合粒子的形成机理。     

核／壳型聚硅氧烷丙烯酸酯复合乳液的制备

采用种子乳液聚合的方法制备了具有核／壳结构的聚硅氧烷丙烯酸酯复合乳液，考察了乳化剂、单体的加入方式及配比对产生乳液粒子的影响。结果表明，乳化剂在核阶段和壳阶段的单体聚合中都起着很重要的作用，当乳化剂分子在乳液粒子上的覆盖率低于４０％时，可制得较理想的核／壳型复合乳液。     

Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions

This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution.

On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced.

On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene–pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size.

Nevertheless, the polymer acts already as a “template” during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed.

The particle formation for both methods is checked by means of UV–vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM).     

反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征

用甲基丙烯酸甲酯(MMA)作油相,反相胶束微乳液作为模板,制备了纳米氯化银(AgCl)粒子,再进行原位聚合制备了纳米氯化银/聚甲基丙烯酸甲酯(AgCl/PMMA)复合材料.透射电镜(TEM)分析表明,纳米AgCl的尺寸为20～80 nm.扫描电镜(SEM)测试表明纳米AgCl粒子均匀地存在于PMMA基材中.红外分析证明,胶束中水和表面活性剂AOT的羰基在MMA聚合后微观环境发生变化,纳米粒子同聚合物之间有吸附行为.动态力学(DMTA)分析复合材料,发现纳米AgCl粒子与聚合物之间存在强烈相互作用,形成了中间相层(interphase layer),改变了聚合物的动态力学性能.     

Formation of organically and inorganically passivated CdS nanoparticles in reverse microemulsions

This paper is focused on the formation of organically and inorganically passivated cadmium sulfide (CdS) nanoparticles in two different types of microemulsions. On the one hand, we used a ternary inverse microemulsion consisting of water, heptanol, and 3-(N,N-dimethyldodecylammonio)propanesulfonate and on the other hand, a poly(ethyleneimine)-based quaternary microemulsion containing water, toluene, pentanol, and sodium dodecylsulfate. UV-vis measurements confirm the formation of CdS-ZnS core-shell nanoparticles in the ternary microemulsion. Using the quaternary microemulsion template phase, polymer capped luminescent CdS nanoparticles can be formed. After a complete solvent evaporation, the nanoparticles are redispersed in water and characterized by means of dynamic light scattering and transmission electron microscopy. From the ternary microemulsion, well-stabilized CdS-ZnS core-shell nanoparticles with diameters of about 5 nm can be redispersed, but from the quaternary microemulsion, only nanoparticle aggregates of about 100 nm.     

微乳法合成可控粒径纳米Pt/Al2O3电催化CO氧化的尺寸效应

采用微乳法室温下合成了粒径可控Pt/Al₂O₃催化剂(1～10 nm), 以CO电催化氧化为探针反应考察了Pt微粒尺寸与催化反应性能之间的关系. 利用透射电镜(TEM), 扫描电镜(SEM), 循环伏安法(CV)等手段对催化剂进行表征, 结果表明催化剂性能与Pt粒径之间存在明显的尺寸效应, 催化剂存在最佳活性尺寸.     

Polyelectrolyte-modified microemulsions as new templates for the formation of nanoparticles

The paper is focused on the formation and redispersion of monodisperse BaSO₄ nanoparticles in polyelectrolyte-modified microemulsions. It is shown that a cationic polyelectrolyte of low molar mass, e.g. poly(diallyldimethylammonium chloride) (PDADMAC), can be incorporated into the individual inverse microemulsion droplets (L2 phase) consisting of heptanol, water, and an amphoteric surfactant with a sulfobetaine head group. These PDADMAC-filled microemulsion droplets can be successfully used as a template phase for the nanoparticle formation. The monodisperse BaSO₄ nanoparticles are produced by a simple mixing procedure and can be redispersed after solvent evaporation without a change in particle dimensions. Dynamic and electrophoretical light scattering in combination with sedimentation experiments in the analytical ultracentrifuge of the redispersed powder show polyelectrolyte-stabilized nanoparticles with diameters of about 6 nm. The polyelectrolyte shows a “size control effect”, which can be explained by the polyelectrolyte–surfactant interactions in relation to the polyelectrolyte–nanoparticle interactions during the particle growth, solvent evaporation and redispersion process. However, the approach used here opens a way to produce different types of polyelectrolyte-stabilized nanoparticles (including rare metals, semiconductors, carbonates or oxides) of very small dimensions.     

MnOOH纳米棒的反胶束法制备及表征

采用水溶液/CTAB/正丁醇/庚烷四组分组成的反相胶束体系,制备了MnOOH纳米棒,并用透射电镜(TEM)、高分辨透射电镜(HRTEM)和X射线粉末衍射(XRD)进行了表征.结果显示所得MnOOH为单斜晶系,直径约为10 nm、长度约为200 nm.实验表明,不同的反应时间所得纳米棒的长度不同,但直径可以保持不变.     

核壳结构PS/CeO2复合微球的制备及其在化学机械抛光中的应用

以原位化学沉淀的方法制备了不同粒径、包覆结构PS(核)/CeO2(壳)复合微球,利用X射线衍射仪、透射电子显微镜、选区电子衍射、场发射扫描电子显微镜、能谱分析仪、Fourier转换红外光谱仪、热失重分析仪和ζ电位测定仪等手段对所制备样品的微观结构进行了表征。将所制备的复合微球用做磨料,考察其对二氧化硅介质层的抛光性能,用原子力显微镜观察和测量抛光表面的微观形貌、轮廓曲线和粗糙度。结果表明,所制备的PS/CeO2复合微球具有核壳包覆结构,粒径分别约为140,180和220 nm,PS内核被粒径约为5 nm的CeO2颗粒均匀包覆。AFM结果显示,复合磨料的粒径越小,抛光后表面粗糙度越低;且酸性(pH=3)比碱性(pH=10)抛光浆料具有更好的抛光效果。     

油酸单乙醇酰胺聚氧乙烯醚微乳液体系的研究

以油酸单乙醇酰胺聚氧乙烯醚作为乳化剂制备水包油型微乳液.通过拟三元相图、粒径大小及粒径分布确定较优配方:复配表面活性剂(由油酸单乙醇酰胺聚氧乙烯醚和吐温20组成)的亲水亲油平衡值(HLB值)为15,助表面活性剂为正丁醇,复配表面活性剂与助表面活性剂的质量比(Km值)为1,混合表面活性剂与正辛烷的质量比(S/O值)=1∶...     

A new and simple method for sulfur nanoparticles synthesis

Sulfur nanoparticles were successfully synthesized via novel water-in-oil microemulsion system. The microemulsion system contained cyclohexane as an oil phase, Triton X-100 as a surfactant, butanol as a co-surfactant and sodium polysulfide solution or hydrochloric acid solution as aqueous phase, respectively. The sulfur nanoparticles were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy and Fourier transform infrared spectroscopy. The results showed that the as-prepared monoclinic sulfur nanoparticles exhibited high purity and spherical shape with an average size of about 22 nm.     

油包水型微乳中层柱状磷酸锆的制备与表征

以氧氯化锆(ZrOCl2·8H2O)和磷酸三丁酯(C4H9O)3PO为原料, 在正庚烷(C7H10)-十六烷基三甲基溴化铵(CTAB)/正丁醇(C4H9OH)-水的反向微乳体系中制备了Zr(HPO4)2·H2O, (H3O)+Zr2(PO4)3和Zr(HPO4)8·H2O三种不同结构的层柱状磷酸锆. 运用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和X射线衍射仪(XRD)等仪器对产物进行了表征, 考察了不同微乳组成对磷酸锆结构及尺寸的影响. 结果表明, 微乳体系对层柱状磷酸锆的可控制合成具有广泛意义.