The pivotal role of symmetry in the ruthenium-catalyzed ring-closing metathesis of olefins

The synthesis of Ru-based precatalysts with N-heterocyclic carbene (NHC) ligands bearing syn- and anti-methyl groups on the NHC backbone and aryl N-substituents with differing steric bulk was carried out. The catalytic behavior of the monophospine Ru precatalysts (7a, 7b, 8a, and 8b) was compared to the corresponding family of phosphine-free catalysts (9a, 9b, 10a and 10b) in the ring-closing metathesis (RCM) of olefins. These catalysts showed high efficiency in RCM reactions and the syn-isomers 7a and 9a, in particular, proved to be among the most active catalysts in the formation of tetrasubstituted olefins through RCM. DFT studies on the entire RCM catalytic cycle of hindered olefins were performed to rationalize the different behaviors of catalysts with syn- and anti-methyl groups on the NHC backbone. Theoretical results not only disclosed how NHC symmetry influences the overall activity of the catalyst, but also gave relevant and more general indications on the crucial steps of the RCM of olefins.     

A hexafluorobenzene promoted ring-closing metathesis to form tetrasubstituted olefins

Highly efficient formation of tetrasubstituted olefins is described by ring-closing metathesis (RCM) using catalyst 2 in presence of hexafluorobenzene. This combination with hexafluorobenzene shows an unexpected promoting effect, which requires low catalysts loadings and allows the conversion of deficient olefins in high yields and very short reaction times.     

Olefin metathesis catalyst: stabilization effect of backbone substitutions of N-heterocyclic carbene

Ruthenium olefin metathesis catalysts bearing an N-phenyl-substituted N-heterocyclic carbene (NHC) ligand that are resistant to decomposition through C-H activation have been prepared and tested in ring closing metathesis (RCM), cross metathesis (CM), and ROMP reactions. The N, N'-diphenyl-substituted NHC complex proved to be one of the most efficient catalysts in RCM to form tetrasubstituted olefins.     

Synthesis of spirocyclic thiazolidinediones using ring-closing metathesis and one-pot sequential ring-closing/cross metathesis

A novel synthetic route to spirocyclic thiazolidinediones is reported by utilizing ring-closing metathesis (RCM). A selective cross metathesis (CM) of N-allyl azaspiro derivatives with different olefins has been demonstrated to prepare substituted azaspiro-[4.4]nonenediones. The X-ray crystal structure of a spirocyclic thiazolidinedione dimer is described, which has been prepared in two steps from thiazolidinedione using a one-pot sequential ring-closing and self metathesis. Cross metathesis proceeds smoothly with both electron rich and poor olefins. The symmetrical bis-thiazolidinedione spirocyclic system can be used as CM coupling partner with olefins. One-pot sequential RCM-CM has been developed for the synthesis of substituted spirocyclic compounds. The methodology allows a quick access to thia-azaspiro-[4.4]nonene and -[4.5]decene-dione ring systems from readily available starting materials which are not otherwise accessible.     

N-heterocyclic carbene and phosphine ruthenium indenylidene precatalysts: a comparative study in olefin metathesis

Kinetic studies on ring-closing metathesis of unhindered and hindered substrates using phosphine and N-heterocyclic carbene (NHC)-containing ruthenium-indenylidene complexes (first and second generation precatalysts, respectively) have been carried out. These studies reveal an appealing difference, between the phosphine and NHC-containing catalysts, associated with a distinctive rate-determining step in the reaction mechanism. These catalysts have been compared with the benzylidene generation catalysts and their respective representative substrates. Finally, the reaction scope of the two most interesting precatalysts, complexes that contain tricyclohexylphosphine and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (SIMes), has been investigated for the ring-closing and enyne metathesis for a large range of olefins. Owing to their high thermal stability, the SIMes-based indenylidene complexes were more efficient than their benzylidene analogues in the ring-closing metathesis of tetrasubstituted dienes. Importantly, none of the indenylidene precatalysts were found to be the most efficient for all of the substrates, indeed, a complementary complex-to-substrate activity relationship was observed.     

Activated pyridinium-tagged ruthenium complexes as efficient catalysts for ring-closing metathesis

New pyridinium-tagged ruthenium catalysts have been synthesised to perform olefin metathesis in several media including both organic and aqueous solvents and room temperature ionic liquids (RTILs). High activity was obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. However, only fair levels of recycling combined with low to moderate residual ruthenium levels (25–173 ppm) have been observed showing clearly the difficulty of associating high activity and recyclability.     

Olefin metathesis in room temperature ionic liquids using imidazolium-tagged ruthenium complexes

New recyclable imidazolium-tagged ruthenium catalysts have been developed to perform olefin metathesis in room temperature ionic liquids (RTILs). High level of recyclability combined with a high reactivity were obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. Extremely low residual ruthenium levels were detected in the RCM products (average of 7.3 ppm per run). Several examples of olefin cross-metathesis (CM) have been also studied.     

Catalyst economy. Part 2: Sequential metathesis—Kharasch sequences using the Grubbs metathesis catalysts

Sequential ring-closing metathesis (RCM)-Kharasch cyclizations are promoted by the Grubbs metathesis catalysts and provide rapid access to bicyclic lactones and lactams.     

Synthesis of gem-difluoromethylenated massoialactone by ring-closing metathesis

4,4-Difluoromassoialactone has been synthesized for the first time via a very short sequence, where the ring-closing metathesis (RCM) was employed as a key step. The efficient procedure can easily be extended to the synthesis of other gem-difluoromethylenated α,β-unsaturated-δ-lactone moiety. In addition, the viability of RCM of high electron-deficient olefins has been demonstrated.     

Silica-supported catalysts for ring-closing metathesis: effects of linker group and microenvironment on recyclability

The interesting effects of the linker and microenvironment on the recyclability of well-defined silica-supported catalysts were examined, which demonstrated the excellent activity and reusability for the ring-closing metathesis (RCM) of a number of substrates.     

Ring-closing metathesis as a basis for the construction of aromatic compounds

The use of metathesis, especially in the context of ring-closing metathesis (RCM) to form five- and six-membered rings, is widespread in organic chemistry today. However, there are surprisingly few examples of the reaction being used to form aromatic compounds. The central place of aromatic compounds in both medicinal chemistry and natural products synthesis, coupled with the efficiency and functional group tolerance of RCM catalysts, means that there is now an interesting opportunity to use RCM for the synthesis of arenes. Although the formation of an aromatic compound was viewed in many early examples as an undesirable degradation product, several rationally designed methods towards the preparation of aromatic compounds by RCM have recently been developed.     

Synthesis of biaryl compounds using tandem ruthenium-catalyzed ring-closing metathesis

Tandem ring-closing enyne metathesis (RCEM)/ring-closing olefin metathesis (RCM) of tetraenynes with Grubbs second-generation catalyst, followed by elimination, was found to be a new and efficient synthetic approach to biaryl compounds. A preliminary asymmetric version of this approach, which used homochiral Ru-alkylidene catalysts, is also presented.     

Preparation of nitrogen-containing heterocycles using ring-closing metathesis (RCM) and its application to natural product synthesis

Our synthetic study of nitrogen-containing heterocycles using ring-closing metathesis (RCM), such as chiral bicyclic lactams, azacycloundecenes, axially chiral macrolactams, 1,2-dihydroquinolines, 2-quinolinone and indoles, including a development of silyl-enol ether ene metathesis and isomerization of terminal olefins, are described. Their applications to natural product synthesis are also reported.     

Acid-mediated activation of modified ring-closing metathesis catalysts

To improve the reactivity of Grubbs catalyst, novel ligands were designed and synthesized which possess nitrogen-containing heterocycles such as imidazole and pyridine. The modified catalysts were treated with a range of acids and the acid salt forms were used as catalysts for ring-closing metathesis (RCM) reactions. As a result, reactions employing the acid-modified catalysts showed considerable reactivity enhancement in RCM.     

N,N'-dialkyl- and N-alkyl-N-mesityl-substituted N-heterocyclic carbenes as ligands in Grubbs catalysts

Various symmetrically and asymmetrically substituted N-heterocyclic carbene (NHC) ligands bearing aliphatic nitrogen-containing side groups have been synthesised. In our attempts to isolate the corresponding second-generation Grubbs catalysts, we were unsuccessful when using the symmetrical aliphatic NHC ligands. For the asymmetrical ligands bearing an aliphatic moiety on one side and an aromatic mesityl group on the other side, substitution of a phosphine ligand was achieved. The performance of a so-formed series of Ru-based metathesis initiators has been evaluated for the ring-opening metathesis polymerisation (ROMP) of cycloocta-1,5-diene and the ring-closing metathesis (RCM) of diethyl diallylmalonate.     

Ring-Closing Olefin Metathesis Catalyzed by Well-Defined Vanadium Alkylidene Complexes

Vanadium-based catalysts have shown activity and selectivity in ring-opening metathesis polymerization of strained cyclic olefins comparable to those of Ru, Mo, and W catalysts. However, the application of V alkylidenes in routine organic synthesis is limited. Here, we present the first example of ring-closing olefin metathesis catalyzed by well-defined V chloride alkylidene phosphine complexes. The developed catalysts exhibit tolerance to various functional groups, such as an ether, an ester, a tertiary amide, a tertiary amine, and a sulfonamide. The size and electron-donating properties of the imido group and the phosphine play a crucial role in the stability of active intermediates. Reactions with ethylene and olefins suggest that both β-hydride elimination of the metallacyclobutene and bimolecular decomposition are responsible for catalyst degradation.     

Probing the origin of degenerate metathesis selectivity via characterization and dynamics of ruthenacyclobutanes containing variable NHCs

The preparation of new phosphonium alkylidene ruthenium metathesis catalysts containing N-heterocyclic carbenes (NHCs) that result in a preference for degenerate metathesis is described. The reaction of the catalysts with ethylene or substrates relevant to ring-closing metathesis (RCM) produced ruthenacyclobutanes that could be characterized by cryogenic NMR spectroscopy. The rate of α/β methylene exchange in ethylene-only ruthenacycles was found to vary widely between ruthenacycles, in some cases being as low as 3.97 s(-1) at -30 °C, suggesting that the NHC plays an important role in degenerative metathesis reactions. Attempts to generate RCM-relevant ruthenacycles resulted in the low-yielding formation of a previously unobserved species, which we assign to be a β-alkyl-substituted ruthenacycle. Kinetic investigations of the RCM-relevant ruthenacycles in the presence of excess ethylene revealed a large increase in the kinetic barrier of the rate-limiting dissociation of the cyclopentene RCM product compared with previously investigated catalysts. Taken together, these results shed light on the degenerate/productive selectivity differences observed for different metathesis catalysts.     

Ring-closing metathesis in glycerol under microwave activation

Glycerol, a biodegradable and virtually non-toxic bio-sourced chemical can be used as an alternative, reusable, sustainable solvent, with so far limited application in the field of green organic chemistry. Herein, the reaction conditions have been screened for the ring-closing metathesis (RCM) of N,N-diallyltosylamine and diethyl diallylmalonate in glycerol, under microwave irradiation and in the presence of the most common commercially available RCM catalysts. The products were isolated in high yield after extraction and the catalyst could be recycled up to two times. Results with simultaneous cooling of the reaction vessel under microwave irradiation are also reported.     

Lewis acid assisted ring-closing metathesis of chiral diallylamines: an efficient approach to enantiopure pyrrolidine derivatives

Lewis acid assisted ring-closing olefin metathesis (RCM) of chiral diallylamines, using the second generation RCM ruthenium-based catalyst, leads to enantiopure pyrrolidine derivatives in 79-93% yields under very mild conditions. The scope of the olefin metathesis has been expanded. [structure: see text]     

A rapid formal synthesis of the macrolide (−)-A26771B

(−)-A26771B, a novel 16-membered macrolide with antibiotic activity, has been formally synthesized. In the synthesis ruthenium catalyzed ring-closing olefin metathesis (RCM) was used as a key reaction to construct the lactone ring.