Effect of electrolytes on the cloud point of chlorpromazine hydrochloride solutions

Cloud point (CP) phenomenon occurring in amphiphilic drug chlorpromazine hydrochloride (CPZ) solutions with and without salts is reported herein. The CP of a 50mM CPZ solution (prepared in 10mM sodium phosphate, SP, buffer) was found to decrease with increasing pH, both in the absence as well as presence (50mM) of added salts (NaCl, NaBr, LiBr, KBr, tetra-n-butylammonium bromide). Whereas, at a fixed concentration of NaCl, the CP increased with increasing CPZ concentration, addition of increasing amounts of salts (NaF, NaCl, NaBr, LiCl, KCl) to 50mM CPZ solution (at pH 6.7) caused continuous increase in CP. On the basis of these studies the binding-effect orders of counterions and co-ions have been deduced, respectively, as: Br(-)>Cl(-)>F(-) and Li(+)>Na(+)>K(+). The similar trend of increasing CP with addition of increasing amounts of quaternary bromides (tetramethylammonium bromide, TMeAB; tetraethylammonium bromide, TEtAB; tetra-n-propylammonium bromide, TPrAB; tetra-n-butylammonium bromide, TBuAB; tetra-n-pentylammonium bromide, TPeAB) to 50mM CPZ solutions (at pH 6.7) was found to be dependent upon the alkyl chain length of the particular salt. The overall behaviour has been discussed in terms of electrostatic interactions, micellar growth, and mixed micelle formation.     

Investigation of the role of electrolytes and non-electrolytes on the cloud point and dye solubilization in antidepressant drug imipramine hydrochloride solutions

Antidepressant drug imipramine hydrochloride (IMP) is amphiphilic which shows surfactant-like behavior in aqueous solutions. We have studied the effect of adding electrolytes and non-electrolytes on the micellar behavior of IMP by making cloud point (CP) and dye solubilization measurements. The CP of a 100mM IMP solution (prepared in 10mM sodium phosphate (SP) buffer) was found to decrease with increasing pH, both in the absence as well as presence of added salts. Increase in pH increased the visible absorbance of Sudan III dye solubilized in the drug micelles, implying micellar growth. Addition of increasing amounts of salts to 100mM IMP solutions (at pH 6.7) caused continuous increase in CP due to micellar growth. On the basis of these studies, the binding-effect orders of counter- and co-ions have been deduced, respectively, as: Br(-)>Cl(-)>F(-) and Li(+)相似文献   

Cloud Point Phenomenon in Amphiphilic Drug Promethazine Hydrochloride+Electrolyte Systems

Herein we report clouding phenomenon occurring in amphiphilic drug promethazine hydrochloride (PMT) in the presence of electrolytes. The CP of 50 mM drug solution, prepared in 10 mM sodium phosphate buffer, was found to decrease with increasing pH due to deprotonation of drug molecules at high pH. Addition of inorganic salts (KF, KCl and KBr) to drug solutions at fixed pH (6.7) and drug concentration (50 mM) caused an increase in CP. The results have been discussed on the desorption/adsorption of counterions to the headgroups. Cations also increased the CP by affecting the water structure with their effectiveness being in the order: Li⁺<Na⁺<K⁺<NH₄ ⁺. In the presence of NaCl, increase in drug concentration increased the CP while increase in pH showed an opposite trend.     

Cleavage of phosphate diesters mediated by Zn(II) complex in Gemini surfactant micelles

The cleavage of 2-hydroxypropyl p-nitrophenyl phosphate (HPNP) catalyzed by the Zn(II)-biap (biap: N,N-bis(2-ethyl-5-methylimidazole-4-ylmethyl)aminopropane) complex has been investigated spectrophotometrically in a micellar solution of cationic Gemini surfactant 16-2-16 [bis(hexadecyldimethylammonium)ethane bromide] and CTAB (hexadecyltrimethylammonium bromide) at 25+/-0.1 degrees C. The experimental results reveal that a higher rate of acceleration (about 2016-fold) of HPNP cleavage promoted by the Zn(II)-biap complex has been observed in the 16-2-16 micellar solution in comparison with the background rate (k(0)) of HPNP spontaneous cleavage at 25 degrees C. Reaction rates of HPNP cleavage in CTAB micellar solutions are only about 40% of that in Gemini 16-2-16 micelles under comparable conditions. In addition, the cleavage rates of HPNP in Gemini micelles and in CTAB micelles are respectively 29.5 times and 12 times faster than that in aqueous buffer. Especially, a "sandwich absorptive mode" has been proposed to explain the acceleration of HPNP cleavage in a cationic micellar solution.     

Enthalpies of solution of some tetraalkylammonium bromides in binary mixtures of water and some amides

Enthalpies of solution of tetraethylammonium bromide in mixtures of N,N-dimethylformamide (DMF) and water and of tetramethylammonium bromide in mixtures of DMF and water, N-methylformamide (NMF) and water, formamide (F) and water, and of NMF and F have been measured calorimetrically at 25°C in the whole mole-fraction range. The enthalpies of solution of tetraethylammonium bromide in DMF-water reach a maximum value while the enthalpies of solution of tetraethylammonium bromide in this mixture show a flat, broad maximum and a minimum. A similar behavior is found in NMF-water and F-water mixtures. In the NMF-F system the enthalpies of solution display a nearly ideal behavior. The results are compared with those of tetra-n-butylammonium bromide and of tetra-n-propylammonium bromide.     

Influence of Electrolytes on the Micellar Growth of Amphiphilic Drug Chlorpromazine Hydrochloride

The effect of electrolytes on the micellar behavior of an amphiphilic drug, chlorpromazine (CPZ) hydrochloride, was studied using cloud point (CP) and dye solubilization techniques. In the presence of KBr, increase in pH led to decrease in the CP of 50 mmol·L_-1 drug solution (prepared in 10 mmol·L_-1 sodium phosphate (SP) buffer) because of deprotonation of drug molecules at high pH. The visible absorbance increased (due to dye solubilization) with the increase in pH from 6.5 to 6.9, which indicated micellar growth. At fixed pH (6.7), addition of inorganic salts (KF, KCl, and KBr) to drug solutions (50 mmol·L_-1) caused an increase in the CP as well as in the visible absorbance, with effectiveness being in the order: F_- < Cl_- < Br_-. The results were discussed on the basis of counter-ion binding and their effect toward micellar growth. Cations (co-ions) also led to an increase in the CP (and also the visible absorbance), with their effectiveness order being Li₊ > Na₊ > K₊, which was explained by considering cognizance of their hydrated radii. Compared with anions, their effect was small. Increase in [CPZ] caused micellar growth and hence the CP as well as the visible absorbance increased. The overall behavior was discussed in terms of electrostatic interactions and micellar growth.     

A reversed-phase ion-interaction chromatographic method for in-vitro estimation of the percutaneous absorption of water-soluble UV filters

An analytical method based on ion-interaction chromatography with UV detection for simultaneous in-vitro estimation of the percutaneous absorption of the most used water-soluble UV filters in sunscreen cosmetics is proposed. These UV filters were phenylbenzimidazole sulfonic acid, disodium phenyl dibenzimidazole tetrasulfonate, benzophenone-4, and terephthalylidene dicamphor sulfonic acid. The methodology is based on applying the sunscreen containing the target UV filters to human epidermis in a diffusion cell. Analytes are determined in the receptor solution. To ensure skin integrity, screening of the cells was carried out by analytical determination of a marker. Analytical variables such as percentage ethanol, concentration of ion-pairing agent, pH of the mobile phase, and temperature were studied in order to achieve high resolution of the chromatographic peaks in the lowest possible time of analysis. The conditions selected consisted of a mobile phase composed of 35:65 (v/v) ethanol–ammonium acetate buffer solution (pH 4, containing 50 mmol L⁻¹ tetra-n-butylammonium bromide). The chromatographic determination was carried out with the analytical column at 50 °C. UV detection was carried out at the maximum absorption wavelength for each analyte. The limit of detection (3s _y/x /b) ranged from 16 to 65 ng mL⁻¹, depending on the analyte.     

Partial molal heat capacities of tetraalkylammonium bromides in methanol from 10 to 50°C

Enthalpies of solution habe beenmeasured for tetraethyl-, tetra-n-propyl-, and tetra-n-butylammonium bromides in anhydrous methanol at several temperatures ranging from 5 to 55°C. The data were extrapolated to infinite dilution by an extended Debye-Hückel equation to obtain standard enthalpies of solution ΔH ₃ ⁰ , and the integral heat method was employed to obtain partial molal heat capacities , of the corresponding salts from 10 to 50°C. These data, along with similar data for tetramethylammonium bromide previously reported, were used to assign an, absolute heat capacity to the bromide ion in anhydrous methanol. Comparison of the absolute heat capacities of the bromide and tetraalkylammonium ions in water and methanol suggests that the processes occurring in the two solvents are quite dissimilar.     

Studies of mixed micelle formation between cationic gemini and cationic conventional surfactants

Mixed micellization of dimeric cationic surfactants tetramethylene-1,4-bis(hexadecyldimethylammonium bromide)(16-4-16), hexamethylene-1,6-bis(hexadecyldimethylammonium bromide) (16-6-16) with monomeric cationic surfactants hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), and tetradecyltrimethylammonium bromide (TTAB) have been studied by conductivity and steady-state fluorescence quenching techniques. The behavior of mixed systems, their compositions, and activities of the components have been analyzed in the light of Rubingh's regular solution theory. The results indicate synergism in the binary mixtures. Ideal and experimental critical micelle concentrations (i.e., cmc(*) and cmc) show nonideality, which is confirmed by beta values and activity coefficients. The micelle aggregation numbers (N(agg)), evaluated using steady-state fluorescence quenching at a total concentration of 2 mM for CTAB/16-4-16 or 16-6-16 and 5 mM for TTAB/16-4-16 or 16-6-16 systems, indicate that the contribution of conventional surfactants was always more than that of the geminis. The micropolarity, dielectric constant and binding constants (K(sv)) of mixed systems have also been evaluated from the ratios of respective peak intensities (I(1)/I(3) or I(0)/I(1)).     

Selective fluorescence detection of nitroxyl over nitric oxide in buffered aqueous solution using a conjugated metallopolymer

A bithiophene-substituted poly(p-phenyleneethynylene) derivative (CP1) having water-solubilizing side chains was prepared and characterized. Copper(II)-induced quenching of CP1 emission was quantified in H₂O, MeCN/H₂O (90:10), and pH 7.4, 50 mM HEPES, 100 mM KCl buffer. In buffer, treatment of CP1-Cu(II) with nitroxyl (HNO) produces an immediate 2.1-fold increase in emission, whereas exposure to NO(g) effects no fluorescence restoration. The ability to distinguish HNO from NO chemically at physiological pH represents a productive step towards the development of selective, fluorescence-based biosensors for HNO.     

Enthalpies of solution of tetra-n-butylammonium bromide in binary mixtures of water,formamide, N-methylformamide,and N,N-dimethylformamide

The enthalpies of solution of tetra-n-butylammonium bromide have been measured in mixtures of formamide (F) with water, N-methylformamide (NMF) with water, N,N-dimethylformamide (DMF) with water, F with NMF, DMF with F, and NMF with DMF at 25°C in the whole mole-fraction range. The enthalpies of solution vs composition profiles show a maximum value in the DMF-H₂O and in the DMF-F systems. In the F-NMF and NMF-DMF mixturesn-Bu₄NBr displays a nearly ideal behavior, whereas in the other solvent systems the excess enthalpy of solution deviates substantially from zero.     

Volumetric properties of the (tetrahydrofuran + water) and (tetra-n-butyl ammonium bromide + water) systems: Experimental measurements and correlations

In this communication, we report experimental density data for the binary mixtures of (water + tetrahydrofuran) and (water + tetra-n-butyl ammonium bromide) at atmospheric pressure and various temperatures. The densities were measured using an Anton Paar™ digital vibrating-tube densimeter. For the (tetrahydrofuran + water) system, excess molar volumes have been calculated using the experimental densities and correlated using the Redlich–Kister equation. The Redlich–Kister equation parameters have been adjusted on experimental results. The partial molar volumes and partial excess molar volumes at infinite dilution have also been calculated for each component. A simple density equation was finally applied to correlate the measured density of the (tetra-n-butyl ammonium bromide + water) system.     

Nonelectrolyte-Induced CP Variation of TX-114+TBAB System

The effects of nonelectrolytes (ureas, amino acids, sugars) on the cloud point (CP) of nonionic surfactant Triton X-114 (TX-114) and tetra-n-butylammonium bromide (TBAB) system were studied. Ureas as well as thioureas increased the CP. Behaviors of amino acids depended upon their nature. Nonpolar and uncharged polar amino acids were less effective in changing the CP. However, tryptophan and phenylalanine increased the CP sharply. Acidic amino acid (aspartic acid) and sugars decreased the CP. The results were explained in terms of their effect on water structure. Amino acids got solubilized either in the micellar interior or in the bulk phase.     

In the footsteps of August Michaelis: Syntheses and Thermodynamics of Extremely Low-Volatile Ionic Liquids

A series of nine different known ionic liquids or low melting salts was synthesised and purified. They are composed of the [NTf₂]^– (bis(trifluoromethane)sulfonimide), [OTf]^– (trifluoro-methane-sulfonate), or [B(CN)₄]^– (tetracyanidoborate) anion and [Ph₄P]⁺ (tetraphenylphosphonium), [Ph₃BzP]⁺ (triphenylbenzyl phosphonium), [ⁿBu₄P]⁺ (tetra-ⁿbutylphosphonium), [ⁿBuPh₃P]⁺ (tri-phenyl-ⁿbutylphosphonium), [ⁿBu₄N]⁺ (tetra-ⁿbutylammonium), or the [PPN]⁺ (bis(triphenylphosphine)iminium) cation. Precise vapour pressure data and enthalpies of vaporisation were measured using the Quartz Crystal Microbalance (QCM) method and evaluated. Structure-property relations are established using the obtained data as well as literature known data of ILs with alkyl-substituted imidazolium cations. It turns out that ILs with the tetracyanidoborate anion have even higher values of the enthalpy of vaporisation than those with the common [NTf₂]⁻ or [OTf]⁻ anion and therefore are even less volatile.     

Separation of dietary omega‐3 and omega‐6 fatty acids in food by capillary electrophoresis

A lower dietary omega‐6/omega‐3 (n‐6/n‐3) fatty acid ratio (<4) has been shown to be beneficial in preventing a number of chronic illnesses. Interest exists in developing more rapid and sensitive analytical methods for profiling fatty acid levels in foods. An aqueous CE method was developed for the simultaneous determination of 15 n‐3 and n‐6 relevant fatty acids. The effect of pH and concentration of buffer, type and concentration of organic modifier, and additive on the separation was investigated in order to determine the best conditions for the analysis. Baseline separations of the 15 fatty acids were achieved using 40 mM borate buffer at pH 9.50 containing 50 mM SDS, 10 mM β‐cyclodextrin, and 10% acetonitrile. The developed CE method has LODs of <5 mg/L and good linearity (R² > 0.980) for all fatty acids studied. The proposed method was successfully applied to the determination of n‐3 and n‐6 fatty acids in flax seed, Udo® oils and a selection of grass‐fed and grain‐fed beef muscle samples.     

Vinyl polymerization. 403. Polymerization of vinyl monomer initiated with sodium poly-p-vinylphenolate

The polymerization of vinyl monomer initiated by poly-p-vinylphenol (PVPh) in NaOH aqueous solution was carried out at 85°C with shaking. Methyl methacrylate (MMA) was polymerized, whereas styrene and acrylonitrile were not. PVPh, which is dissociated into phenolate form (PVPh^?Na⁺) in NaOH aqueous solution, was effective for the polymerization. The effects of the amounts of MMA, PVPh, NaOH, and H₂O on the conversion of MMA were studied. The rate of polymerization of MMA increased with an increase in the molecular weight of PVPh-Na. The overall activation energy was estimated as 54 kJ mol^?1. The polymerization proceeded through a radical mechanism. The addition of tetra-n-butylammonium bromide increased the rate of polymerization.     

Metallomicelle catalysis: Hydrolysis of p‐nitrophenyl picolinate induced by Schiff base Co(II) complexes in a Gemini surfactant micellar solution

Two Schiff base cobalt(II) complexes containing crowned substituents have been synthesized and employed to promote the hydrolysis of p‐nitrophenyl picolinate (PNPP) in a buffered micellar solution formed by a cationic Gemini surfactant, bis(hexadecyldimethylammonium)hexane bromide (G(hex)C16, 2Br^?) over a pH range of 6.50–8.50. In comparison, the reactivity of PNPP hydrolysis catalyzed by the same catalysts in the other micellar system, formed by a conventional single‐chain analogue, that is, hexadecyltrimethylammonium bromide (CTAB), has also been evaluated under a selected condition. The results clearly reveal that the two metallomicelles made of the aforementioned Co(II) complexes and the G(hex)C16 are both efficient for catalyzing PNPP hydrolysis with about 3 orders of magnitude in rate acceleration compared with the background rate of PNPP spontaneous hydrolysis. Moreover, the rates of PNPP hydrolysis catalyzed by the two cobalt(II) complexes in G(hex)C16 micelles are about 2 times higher than in CTAB micelles, correspondingly. In addition, observations show that steric hindrance of substituents of the two complexes is also one of the major influencing factors in the PNPP hydrolytic reaction. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 672–680, 2007     

Capillary electrophoresis–electrochemiluminescence detection method for the analysis of ibandronate in drug formulations and human urine

A simple, rapid and sensitive CE method coupled with electrochemiluminescence (ECL) detection for direct analysis of ibandronate (IBAN) has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 9.0) and a voltage of 13.5 kV, separation of IBAN in a 30‐cm length capillary was achieved in 3 min. ECL detection was performed with an indium tin oxide working electrode bias at 1.6 V (versus a Pt wire reference) in a 200‐mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)₃²⁺ (where bpy=2,2′‐bipyridyl). Derivatization of IBAN prior to CE‐ECL analysis was not needed. Linear correlation (r=0.9992, n=7) between ECL intensity and analyte concentration was obtained in the range of 0.25–50 μM IBAN. The LOD of IBAN in water was 0.08 μM. The developed method was applied to the analysis of IBAN in a drug formulation and human urine sample. SPE using magnetic Fe₃O₄@Al₂O₃ nanoparticles as the extraction phase was employed to pretreat the urine sample before CE‐ECL analysis. The linear range was 0.2–12.0 μM IBAN in human urine (r=0.9974, n=6). The LOD of IBAN in urine was 0.06 μM. Total analysis time including sample preparation was <1 h.     

Interactions between cationic gemini/conventional surfactants with polyvinylpyrrolidone: Specific conductivity and dynamic light scattering studies

The interaction between bis(hexadecyldimethylammonium)hexane dibromide (16-6-16), bis(tetradecyldimethylammonium)hexane dibromide (14-6-14), their conventional counterparts cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) with polyvinylpyrrolidone (PVP) was investigated using the conductivity technique. The results show that gemini surfactants interact strongly with PVP as compared to conventional surfactants. The results also reveal that the surfactants with shorter hydrocarbon chain interact weakly as those of longer hydrocarbon chain. The interactions of 16-6-16 and 14-6-14 and their conventional counterparts with PVP were also studied using dynamic light scattering (DLS) measurements. We have also highlighted the effect of surfactant–polymer interactions on the dispersion force in the solution. Critical aggregation concentration (cac) and critical micelle concentration (cmc) were obtained using the conductivity data. The degrees of micelle ionization and free energies associated with aggregation, micellization, and transfer have also been evaluated and discussed.     

Dual molecular light switches for pH and DNA based on a novel Ru(II) complex. A non-intercalating Ru(II) complex for DNA molecular light switch

A new Ru(II) complex of [Ru(phen)(2)(Hcdpq)](ClO(4))(2) {phen = 1,10-phenanthroline, Hcdpq = 2-carboxyldipyrido[3,2-f:2',3'-h]quinoxaline} was synthesized and characterized. The spectrophotometric pH and calf thymus DNA (ct-DNA) titrations showed that the complex acted as a dual molecular light switch for pH and ct-DNA with emission enhancement factors of 17 and 26, respectively. It was shown to be capable of distinguishing ct-DNA from yeast RNA with this binding selectivity being superior to two well-known DNA molecular light switches of [Ru(bpy)(2)(dppz)](2+) {bpy =2,2'-bipyridine, and dppz = dipyrido-[3,2-a:2',3'-c]phenazine}and ethidium bromide. The complex bond to ct-DNA probably in groove mode with a binding constant of (4.67 ± 0.06) × 10(3) M(-1) in 5 mM Tris-HCl, 50 mM NaCl (pH = 7.10) buffer solution, as evidenced by UV-visible absorption and luminescence titrations, the dependence of DNA binding constants on NaCl concentrations, DNA competitive binding with ethidium bromide, and emission lifetime and viscosity measurements. To get insight into the light-switch mechanism, theoretical calculations were also performed by applying density functional theory (DFT) and time-dependent DFT.