Further Dense Properties of the Space of Circle Diffeomorphisms with a Liouville Rotation Number

In continuation of Matsumoto’s paper (Nonlinearity 25:1495–1511, 2012) we show that various subspaces are \(C^{\infty }\)-dense in the space of orientation-preserving \(C^{\infty }\)-diffeomorphisms of the circle with rotation number \(\alpha \), where \(\alpha \in {\mathbb {S}}^1\) is any prescribed Liouville number. In particular, for every odometer \({\mathcal {O}}\) of product type we prove the denseness of the subspace of diffeomorphisms which are orbit-equivalent to \({\mathcal {O}}\).     

Resolvent Estimates for High-Contrast Elliptic Problems with Periodic Coefficients

We study the asymptotic behaviour of the resolvents \({(\mathcal{A}^\varepsilon+I)^{-1}}\) of elliptic second-order differential operators \({{\mathcal{A}}^\varepsilon}\) in \({\mathbb{R}^d}\) with periodic rapidly oscillating coefficients, as the period \({\varepsilon}\) goes to zero. The class of operators covered by our analysis includes both the “classical” case of uniformly elliptic families (where the ellipticity constant does not depend on \({\varepsilon}\)) and the “double-porosity” case of coefficients that take contrasting values of order one and of order \({\varepsilon^2}\) in different parts of the period cell. We provide a construction for the leading order term of the “operator asymptotics” of \({(\mathcal{A}^\varepsilon+I)^{-1}}\) in the sense of operator-norm convergence and prove order \({O(\varepsilon)}\) remainder estimates.     

Persistence and Critical Domain Size for Diffusing Populations with Two Sexes and Short Reproductive Season

A model is considered for a spatially distributed population of male and female individuals that mate and reproduce only once in their life during a very short reproductive season. Between birth and mating, females and males move by diffusion on a bounded domain \(\Omega \) under Dirichlet boundary conditions. Mating and reproduction are described by a (positively) homogeneous function (of degree one). We identify a basic reproduction number \({\mathcal {R}}_0\) that acts as a threshold between extinction and persistence. If \({\mathcal {R}}_0 <1\), the population dies out while it persists (uniformly weakly) if \({\mathcal {R}}_0 > 1\). \({\mathcal {R}}_0\) is the cone spectral radius of a bounded homogeneous map.     

Influence of hydrodynamic slip on convective transport in flow past a circular cylinder

The presence of a finite tangential velocity on a hydrodynamically slipping surface is known to reduce vorticity production in bluff body flows substantially while at the same time enhancing its convection downstream and into the wake. Here, we investigate the effect of hydrodynamic slippage on the convective heat transfer (scalar transport) from a heated isothermal circular cylinder placed in a uniform cross-flow of an incompressible fluid through analytical and simulation techniques. At low Reynolds (\({\textit{Re}}\ll 1\)) and high Péclet (\({\textit{Pe}}\gg 1\)) numbers, our theoretical analysis based on Oseen and thermal boundary layer equations allows for an explicit determination of the dependence of the thermal transport on the non-dimensional slip length \(l_s\). In this case, the surface-averaged Nusselt number, Nu transitions gradually between the asymptotic limits of \(Nu \sim {\textit{Pe}}^{1/3}\) and \(Nu \sim {\textit{Pe}}^{1/2}\) for no-slip (\(l_s \rightarrow 0\)) and shear-free (\(l_s \rightarrow \infty \)) boundaries, respectively. Boundary layer analysis also shows that the scaling \(Nu \sim {\textit{Pe}}^{1/2}\) holds for a shear-free cylinder surface in the asymptotic limit of \({\textit{Re}}\gg 1\) so that the corresponding heat transfer rate becomes independent of the fluid viscosity. At finite \({\textit{Re}}\), results from our two-dimensional simulations confirm the scaling \(Nu \sim {\textit{Pe}}^{1/2}\) for a shear-free boundary over the range \(0.1 \le {\textit{Re}}\le 10^3\) and \(0.1\le {\textit{Pr}}\le 10\). A gradual transition from the lower asymptotic limit corresponding to a no-slip surface, to the upper limit for a shear-free boundary, with \(l_s\), is observed in both the maximum slip velocity and the Nu. The local time-averaged Nusselt number \(Nu_{\theta }\) for a shear-free surface exceeds the one for a no-slip surface all along the cylinder boundary except over the downstream portion where unsteady separation and flow reversal lead to an appreciable rise in the local heat transfer rates, especially at high \({\textit{Re}}\) and Pr. At a Reynolds number of \(10^3\), the formation of secondary recirculating eddy pairs results in appearance of additional local maxima in \(Nu_{\theta }\) at locations that are in close proximity to the mean secondary stagnation points. As a consequence, Nu exhibits a non-monotonic variation with \(l_s\) increasing initially from its lowermost value for a no-slip surface and then decreasing before rising gradually toward the upper asymptotic limit for a shear-free cylinder. A non-monotonic dependence of the spanwise-averaged Nu on \(l_s\) is observed in three dimensions as well with the three-dimensional wake instabilities that appear at sufficiently low \(l_s\), strongly influencing the convective thermal transport from the cylinder. The analogy between heat transfer and single-component mass transfer implies that our results can directly be applied to determine the dependency of convective mass transfer of a single solute on hydrodynamic slip length in similar configurations through straightforward replacement of Nu and \({\textit{Pr}}\) with Sherwood and Schmidt numbers, respectively.     

Approximation of Flat <Emphasis Type="Italic">W</Emphasis><Superscript>2,2</Superscript> Isometric Immersions by Smooth Ones

Let \({S\subset\mathbb{R}^2}\) be a bounded Lipschitz domain and denote by \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)}\) the set of mappings \({u\in W^{2,2}(S;\mathbb{R}^3)}\) which satisfy \({(\nabla u)^T(\nabla u) = Id}\) almost everywhere. Under an additional regularity condition on the boundary \({\partial S}\) (which is satisfied if \({\partial S}\) is piecewise continuously differentiable), we prove that the strong W ^2,2 closure of \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)\cap C^{\infty}(\overline{S};\mathbb{R}^3)}\) agrees with \({W^{2,2}_{\text{iso}}(S; \mathbb{R}^3)}\).     

Long-time Dynamics of Resonant Weakly Nonlinear CGL Equations

Consider a weakly nonlinear CGL equation on the torus \(\mathbb {T}^d\):

$$\begin{aligned} u_t+i\Delta u=\epsilon [\mu (-1)^{m-1}\Delta ^{m} u+b|u|^{2p}u+ ic|u|^{2q}u]. \end{aligned}$$

(*)

Here \(u=u(t,x)\), \(x\in \mathbb {T}^d\), \(0<\epsilon <<1\), \(\mu \geqslant 0\), \(b,c\in \mathbb {R}\) and \(m,p,q\in \mathbb {N}\). Define \(I(u)=(I_{\mathbf {k}},\mathbf {k}\in \mathbb {Z}^d)\), where \(I_{\mathbf {k}}=v_{\mathbf {k}}\bar{v}_{\mathbf {k}}/2\) and \(v_{\mathbf {k}}\), \(\mathbf {k}\in \mathbb {Z}^d\), are the Fourier coefficients of the function \(u\) we give. Assume that the equation \((*)\) is well posed on time intervals of order \(\epsilon ^{-1}\) and its solutions have there a-priori bounds, independent of the small parameter. Let \(u(t,x)\) solve the equation \((*)\). If \(\epsilon \) is small enough, then for \(t\lesssim {\epsilon ^{-1}}\), the quantity \(I(u(t,x))\) can be well described by solutions of an effective equation:

$$\begin{aligned} u_t=\epsilon [\mu (-1)^{m-1}\Delta ^m u+ F(u)], \end{aligned}$$

where the term \(F(u)\) can be constructed through a kind of resonant averaging of the nonlinearity \(b|u|^{2p}+ ic|u|^{2q}u\).

     

A framework for synthetic validation of 3D echocardiographic particle image velocimetry

Particle image velocimetry (PIV) has been significantly advanced since its conception in early 1990s. With the advancement of imaging modalities, applications of 2D PIV have far expanded into biology and medicine. One example is echocardiographic particle image velocimetry that is used for in vivo mapping of the flow inside the heart chambers with opaque boundaries. Velocimetry methods can help better understanding the biomechanical problems. The current trend is to develop three-dimensional velocimetry techniques that take advantage of modern medical imaging tools. This study provides a novel framework for validation of velocimetry methods that are inherently three dimensional such as but not limited to those acquired by 3D echocardiography machines. This framework creates 3D synthetic fields based on a known 3D velocity field \({\mathbf{V}}\) and a given 3D brightness field \({\mathbf{B}}\). The method begins with computing the inverse flow \({\mathbf{V}}^{\varvec{*}} \) based on the velocity field \({\mathbf{V}}\). Then the transformation of \({\mathbf{B}}\), imposed by \({\mathbf{V}}\), is calculated using the computed inverse flow according to \({\mathbf{B}}^{\varvec{*}} \left( {\mathbf{x}} \right) = {\mathbf{B}}\left( {{\mathbf{x}} + {\mathbf{V}}^{\varvec{*}} \left( {\mathbf{x}} \right)} \right)\), where x is the coordinates of voxels in \({\mathbf{B}}^{\varvec{*}} \), with a 3D weighted average interpolation, which provides high accuracy, low memory requirement, and low computational time. To check the validity of the framework, we generate pairs of 3D brightness fields by employing Hill’s spherical vortex velocity field. \({\mathbf{B}}\) and the generated \({\mathbf{B}}^{\varvec{*}} \) are then processed by our in-house 3D particle image velocimetry software to obtain the interrelated velocity field. The results indicates that the computed and imposed velocity fields are in agreement.     

On the Justification of Viscoelastic Elliptic Membrane Shell Equations

We consider a family of linearly viscoelastic shells with thickness \(2\varepsilon\), clamped along their entire lateral face, all having the same middle surface \(S=\boldsymbol{\theta}(\bar{\omega})\subset \mathbb{R}^{3}\), where \(\omega\subset\mathbb{R}^{2}\) is a bounded and connected open set with a Lipschitz-continuous boundary \(\gamma\). We make an essential geometrical assumption on the middle surface \(S\), which is satisfied if \(\gamma\) and \(\boldsymbol{\theta}\) are smooth enough and \(S\) is uniformly elliptic. We show that, if the applied body force density is \(O(1)\) with respect to \(\varepsilon\) and surface tractions density is \(O(\varepsilon)\), the solution of the scaled variational problem in curvilinear coordinates, \(\boldsymbol{u}( \varepsilon)\), defined over the fixed domain \(\varOmega=\omega\times (-1,1)\) for each \(t\in[0,T]\), converges to a limit \(\boldsymbol{u}\) with \(u_{\alpha}(\varepsilon)\rightarrow u_{\alpha}\) in \(W^{1,2}(0,T,H ^{1}(\varOmega))\) and \(u_{3}(\varepsilon)\rightarrow u_{3}\) in \(W^{1,2}(0,T,L^{2}(\varOmega))\) as \(\varepsilon\to0\). Moreover, we prove that this limit is independent of the transverse variable. Furthermore, the average \(\bar{\boldsymbol{u}}= \frac{1}{2}\int_{-1}^{1} \boldsymbol{u}dx_{3}\), which belongs to the space \(W^{1,2}(0,T, V_{M}( \omega))\), where

$$V_{M}(\omega)=H^{1}_{0}(\omega)\times H^{1}_{0}(\omega)\times L ^{2}(\omega), $$

satisfies what we have identified as (scaled) two-dimensional equations of a viscoelastic membrane elliptic shell, which includes a long-term memory that takes into account previous deformations. We finally provide convergence results which justify those equations.

     

On the Global Regularity of the Two-Dimensional Density Patch for Inhomogeneous Incompressible Viscous Flow

Regarding P.-L. Lions’ open question in Oxford Lecture Series in Mathematics and its Applications, Vol. 3 (1996) concerning the propagation of regularity for the density patch, we establish the global existence of solutions to the two-dimensional inhomogeneous incompressible Navier–Stokes system with initial density given by \({(1 - \eta){\bf 1}_{{\Omega}_{0}} + {\bf 1}_{{\Omega}_{0}^{c}}}\) for some small enough constant \({\eta}\) and some \({W^{k+2,p}}\) domain \({\Omega_{0}}\), with initial vorticity belonging to \({L^{1} \cap L^{p}}\) and with appropriate tangential regularities. Furthermore, we prove that the regularity of the domain \({\Omega_0}\) is preserved by time evolution.     

Measurements of Transitional and Turbulent Flow in a Randomly Packed Bed of Spheres with Particle Image Velocimetry

Particle image velocimetry (PIV) has been used to investigate transitional and turbulent flow in a randomly packed bed of mono-sized transparent spheres at particle Reynolds number, \(20<{{ Re}}_{\mathrm{p}}< 3220\). The refractive index of the liquid is matched with the spheres to provide optical access to the flow within the bed without distortions. Integrated pressure drop data yield that Darcy law is valid at \({{ Re}}_{\mathrm{p}} \approx 80\). The PIV measurements show that the velocity fluctuations increase and that the time-averaged velocity distribution start to change at lower \({{ Re}}_{\mathrm{p}}\). The probability for relatively low and high velocities decreases with \({{ Re}}_{\mathrm{p}}\) and recirculation zones that appear in inertia dominated flows are suppressed by the turbulent flow at higher \({{ Re}}_{\mathrm{p}}\). Hence there is a maximum of recirculation at about \({{ Re}}_{\mathrm{p}} \approx 400\). Finally, statistical analysis of the spatial distribution of time-averaged velocities shows that the velocity distribution is clearly and weakly self-similar with respect to \({{ Re}}_{\mathrm{p}}\) for turbulent and laminar flow, respectively.     

Glimpses of Flow Development and Degradation During Type B Drag Reduction by Aqueous Solutions of Polyacrylamide B1120

Flow development and degradation during Type B turbulent drag reduction by 0.10 to 10 wppm solutions of a partially-hydrolysed polyacrylamide B1120 of MW \(=\) 18x10⁶ was studied in a smooth pipe of ID \(=\) 4.60 mm and L/D \(=\) 210 at Reynolds numbers from 10000 to 80000 and wall shear stresses Tw from 8 to 600 Pa. B1120 solutions exhibited facets of a Type B ladder, including segments roughly parallel to, but displaced upward from, the P-K line; those that attained asymptotic maximum drag reduction at low Re√ f but departed downwards into the polymeric regime at a higher retro-onset Re√ f; and segments at MDR for all Re√ f. Axial flow enhancement profiles of S\(^{\prime }\) vs L/D reflected a superposition of flow development and polymer degradation effects, the former increasing and the latter diminishing S\(^{\prime }\) with increasing distance downstream. Solutions that induced normalized flow enhancements S\(^{\prime }\)/S\(^{\prime }_{\mathrm {m}} <\) 0.4 developed akin to solvent, with L_e,p/D \(=\) L_e,n/D \(<\) 42.3, while those at maximum drag reduction showed entrance lengths L_e,m/D \(\sim \) 117, roughly 3 times the solvent L_e,n/D. Degradation kinetics were inferred by first detecting a falloff point (Re√f^∧, S\(^{{\prime }\wedge }\)), of maximum observed flow enhancement, for each polymer solution. A plot of S\(^{{\prime }\wedge }\)vs C revealed S\(^{{\prime }\wedge }\)linear in C at low C, with lower bound [S\(^{\prime }\)] \(=\) 5.0 wppm^??1, and S\(^{{\prime }\wedge }\) independent of C at high C, with upper bound S\(^{\prime }_{\mathrm {m}} =\) 15.9. The ratio S\(^{\prime }\)/S\(^{{\prime }\wedge }\) in any pipe section was interpreted to be the undegraded fraction of original polymer therein. Semi-log plots of (S\(^{\prime }\)/S\(^{{\prime }\wedge }\)) at a section vs transit time from pipe entrance thereto revealed first order kinetics, from which apparent degradation rate constants k_deg s^??1 and entrance severities ?ln(S\(^{\prime }\)/S\(^{{\prime }\wedge }\))₀ were extracted. At constant C, k_deg increased linearly with increasing wall shear stress Tw, and at constant Tw, k_deg was independent of C, providing a B1120 degradation modulus (k_deg/Tw) \(=\) (0.012 \(\pm \) 0.001) (Pa s)^??1 for 8 \(<\) Tw Pa \(<\) 600, 0.30 \(<\) C wppm \(<\) 10. Entrance severities were negligible below a threshold Twe \(\sim \) 30 Pa and increased linearly with increasing Tw for Tw \(>\) Twe. The foregoing methods were applied to Type A drag reduction by 0.10 to 10 wppm solutions of a polyethyleneoxide PEO P309, MW \(=\) 11x10⁶, in a smooth pipe of ID \(=\) 7.77 mm and L/D \(=\) 220 at Re from 4000 to 115000. P309 solutions that induced S\(^{\prime }\)/S\(^{\prime }_{\mathrm {m}} <\) 0.4 developed akin to solvent, with L_e,p/D \(=\) L_e,n/D \(<\) 23, while those at MDR had entrance lengths L_e,m/D \(\sim \) 93, roughly 4 times the solvent L_e,n/D. P309 solutions described a Type A fan distorted by polymer degradation. A typical trajectory departed the P-K line at an onset point Re√ f* followed by ascending and descending polymeric regime segments separated by a falloff point Re√f^∧, of maximum flow enhancement; for all P309 solutions, onset Re√ f* = 550 \(\pm \) 100 and falloff Re√f^∧ = 2550 \(\pm \) 250, the interval between them delineating Type A drag reduction unaffected by degradation. A plot of falloff S\(^{{\prime }\wedge }\) vs C for PEO P309 solutions bore a striking resemblance to the analogous S\(^{{\prime }\wedge }\) vs C plot for solutions of PAMH B1120, indicating that the initial Type A drag reduction by P309 after onset at Re√ f* had evolved to Type B drag reduction by falloff at Re√f^∧. Presuming that Type B behaviour persisted past falloff permitted inference of P309 degradation kinetics; k_deg was found to increase linearly with increasing Tw at constant C and was independent of C at constant Tw, providing a P309 degradation modulus (k_deg/Tw) \(=\) (0.011 \(\pm \) 0.002) (Pa s)^??1 for 4 \(<\) Tw Pa \(<\) 400, 0.10 \(<\) C wppm < 5.0. Comparisons between the present degradation kinetics and previous literature showed (k_deg/Tw) data from laboratory pipes of D \(\sim \) 0.01 m to lie on a simple extension of (k_deg/Tw) data from pipelines of D \(\sim \) 0.1 m and 1.0 m, along a power-law relation (k_deg/Tw) \(=\) 10^??5.4.D^??1.6. Intrinsic slips derived from PAMH B1120 and PEO P309-at-falloff experiments were compared with previous examples from Type B drag reduction by polymers with vinylic and glycosidic backbones, showing: (i) For a given polymer, [S\(^{\prime }\)] was independent of Re√ f and pipe ID, implying insensitivity to both micro- and macro-scales of turbulence; and (ii) [S\(^{\prime }\)] increased linearly with increasing polymer chain contour length Lc, the proportionality constant \(\beta =\) 0.053 \(\pm \) 0.036 enabling estimation of flow enhancement S\(^{\prime } =\) C.Lc.β for all Type B drag reduction by polymers.     

Uniqueness of Positive Ground State Solutions of the Logarithmic Schrödinger Equation

We prove the uniqueness of positive ground state solutions of the problem \({ {\frac {d^{2}u}{dr^{2}}} + {\frac {n-1}{r}}{\frac {du}{dr}} + u \ln(|u|) = 0}\), \({u(r) > 0~\forall r \ge 0}\), and \({(u(r),u'(r)) \to (0, 0)}\) as \({r \to \infty}\). This equation is derived from the logarithmic Schrödinger equation \({{\rm i}\psi_{t} = {\Delta} \psi + u \ln \left(|u|^{2}\right)}\), and also from the classical equation \({{\frac {\partial u}{\partial t}} = {\Delta} u +u \left(|u|^{p-1}\right) -u}\). For each \({n \ge 1}\), a positive ground state solution is \({ u_{0}(r) = \exp \left(-{\frac{r^2}{4}} + {\frac{n}{2}}\right),~0 \le r < \infty}\). We combine \({u_{0}(r)}\) with energy estimates and associated Ricatti equation estimates to prove that, for each \({n \in \left[1, 9 \right]}\), \({u_{0}(r)}\) is the only positive ground state. We also investigate the stability of \({u_{0}(r)}\). Several open problems are stated.     

Representation of a Smooth Isometric Deformation of a Planar Material Region into a Curved Surface

We consider the problem of characterizing the smooth, isometric deformations of a planar material region identified with an open, connected subset \({\mathcal{D}}\) of two-dimensional Euclidean point space \(\mathbb{E}^{2}\) into a surface \({\mathcal{S}}\) in three-dimensional Euclidean point space \(\mathbb{E}^{3}\). To be isometric, such a deformation must preserve the length of every possible arc of material points on \({\mathcal{D}}\). Characterizing the curves of zero principal curvature of \({\mathcal{S}}\) is of major importance. After establishing this characterization, we introduce a special curvilinear coordinate system in \(\mathbb{E}^{2}\), based upon an à priori chosen pre-image form of the curves of zero principal curvature in \({\mathcal{D}}\), and use that coordinate system to construct the most general isometric deformation of \({\mathcal{D}}\) to a smooth surface \({\mathcal{S}}\). A necessary and sufficient condition for the deformation to be isometric is noted and alternative representations are given. Expressions for the curvature tensor and potentially nonvanishing principal curvature of \({\mathcal{S}}\) are derived. A general cylindrical deformation is developed and two examples of circular cylindrical and spiral cylindrical form are constructed. A strategy for determining any smooth isometric deformation is outlined and that strategy is employed to determine the general isometric deformation of a rectangular material strip to a ribbon on a conical surface. Finally, it is shown that the representation established here is equivalent to an alternative previously established by Chen, Fosdick and Fried (J. Elast. 119:335–350, 2015).     

Steady States of Fokker–Planck Equations: III. Degenerate Diffusion

This is the third paper in a series concerning the study of steady states of a Fokker–Planck equation in a general domain in \({\mathbb R}^n\) with \(L^{p}_{loc}\) drift term and \(W^{1,p}_{loc}\) diffusion term for any \(p>n\). In this paper, we give some existence results of stationary measures of the Fokker–Planck equation under Lyapunov conditions which allow the degeneracy of diffusion.     

Stability of Fixed Points and Associated Relative Equilibria of the 3-Body Problem on $${\mathbb {S}}^1$$ and $${\mathbb {S}}^2$$S2

We prove that the fixed points of the curved 3-body problem and their associated relative equilibria are Lyapunov stable if the solutions are restricted to \({\mathbb {S}}^1\), but unstable if the bodies are considered in \({\mathbb {S}}^2\).     

Insight into Heterogeneity Effects in Methane Hydrate Dissociation via Pore-Scale Modeling

A large number (1253) of high-quality streaming potential coefficient (\(C_\mathrm{sp})\) measurements have been carried out on Berea, Boise, Fontainebleau, and Lochaline sandstones (the latter two including both detrital and authigenic overgrowth forms), as a function of pore fluid salinity (\(C_\mathrm{f})\) and rock microstructure. All samples were saturated with fully equilibrated aqueous solutions of NaCl (10\(^{-5}\) and 4.5 mol/dm\(^{3})\) upon which accurate measurements of their electrical conductivity and pH were taken. These \(C_\mathrm{sp}\) measurements represent about a fivefold increase in streaming potential data available in the literature, are consistent with the pre-existing 266 measurements, and have lower experimental uncertainties. The \(C_\mathrm{sp}\) measurements follow a pH-sensitive power law behaviour with respect to \(C_\mathrm{f}\) at medium salinities (\(C_\mathrm{sp} =-\,1.44\times 10^{-9} C_\mathrm{f}^{-\,1.127} \), units: V/Pa and mol/dm\(^{3})\) and show the effect of rock microstructure on the low salinity \(C_\mathrm{sp}\) clearly, producing a smaller decrease in \(C_\mathrm{sp}\) per decade reduction in \(C_\mathrm{f}\) for samples with (i) lower porosity, (ii) larger cementation exponents, (iii) smaller grain sizes (and hence pore and pore throat sizes), and (iv) larger surface conduction. The \(C_\mathrm{sp}\) measurements include 313 made at \(C_\mathrm{f} > 1\) mol/dm\(^{3}\), which confirm the limiting high salinity \(C_\mathrm{sp}\) behaviour noted by Vinogradov et al., which has been ascribed to the attainment of maximum charge density in the electrical double layer occurring when the Debye length approximates to the size of the hydrated metal ion. The zeta potential (\(\zeta \)) was calculated from each \(C_\mathrm{sp}\) measurement. It was found that \(\zeta \) is highly sensitive to pH but not sensitive to rock microstructure. It exhibits a pH-dependent logarithmic behaviour with respect to \(C_\mathrm{f}\) at low to medium salinities (\(\zeta =0.01133 \log _{10} \left( {C_\mathrm{f} } \right) +0.003505\), units: V and mol/dm\(^{3})\) and a limiting zeta potential (zeta potential offset) at high salinities of \({\zeta }_\mathrm{o} = -\,17.36\pm 5.11\) mV in the pH range 6–8, which is also pH dependent. The sensitivity of both \(C_\mathrm{sp}\) and \(\zeta \) to pH and of \(C_\mathrm{sp}\) to rock microstructure indicates that \(C_\mathrm{sp}\) and \(\zeta \) measurements can only be interpreted together with accurate and equilibrated measurements of pore fluid conductivity and pH and supporting microstructural and surface conduction measurements for each sample.     

Temporal Homogenization of Linear ODEs,with Applications to Parametric Super-Resonance and Energy Harvest

We consider the temporal homogenization of linear ODEs of the form \({\dot{x}=Ax+\epsilon P(t)x+f(t)}\), where P(t) is periodic and \({\epsilon}\) is small. Using a 2-scale expansion approach, we obtain the long-time approximation \({x(t)\approx {\rm exp}(At) \left( \Omega(t)+\int_0^t {\rm exp}(-A \tau) f(\tau) {\rm d}\tau \right)}\), where \({\Omega}\) solves the cell problem \({\dot{\Omega}=\epsilon B \Omega + \epsilon F(t)}\) with an effective matrix B and an explicitly-known F(t). We provide necessary and sufficient conditions for the accuracy of the approximation (over a \({{\mathcal{O}}(\epsilon^{-1})}\) time-scale), and show how B can be computed (at a cost independent of \({\epsilon}\)). As a direct application, we investigate the possibility of using RLC circuits to harvest the energy contained in small scale oscillations of ambient electromagnetic fields (such as Schumann resonances). Although a RLC circuit parametrically coupled to the field may achieve such energy extraction via parametric resonance, its resistance R needs to be smaller than a threshold \({\kappa}\) proportional to the fluctuations of the field, thereby limiting practical applications. We show that if n RLC circuits are appropriately coupled via mutual capacitances or inductances, then energy extraction can be achieved when the resistance of each circuit is smaller than \({n\kappa}\). Hence, if the resistance of each circuit has a non-zero fixed value, energy extraction can be made possible through the coupling of a sufficiently large number n of circuits (\({n\approx 1000}\) for the first mode of Schumann resonances and contemporary values of capacitances, inductances and resistances). The theory is also applied to the control of the oscillation amplitude of a (damped) oscillator.     

Remarks on the Generalized Reflectionless Schrödinger Potentials

We discuss certain compact, translation-invariant subsets of the set \({\mathcal {R}}\) of the generalized reflectionless potentials for the one-dimensional Schrödinger operator. We determine a stationary ergodic subset of \({\mathcal {R}}\) whose Lyapunov exponent is discontinuous at a point. We also determine an almost automorphic, non-almost periodic minimal subset of \(\mathcal {R}\).