Luminescence in Dy<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> Activated K<Subscript>3</Subscript>Al<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The Dy³⁺ and Eu³⁺ activated K₃Al₂ (PO₄)₃ phosphors were prepared by a combustion synthesis. From a powder X-ray diffraction (XRD) analysis the formation of K₃Al₂ (PO₄)₃ was confirmed. In the photoluminescence emission spectra, the K₃Al₂(PO₄)₃:Dy³⁺ phosphor emits two distinctive colors: blue and yellow whereas K₃Al₂(PO₄)₃:Eu³⁺ emits red color. Thus the combination of colors gives BYR (blue–yellow–red) emissions can produce white light. These phosphors exhibit a strong absorption between 340 and 400 nm which suggest that present phosphor is a promising candidate for producing white light-emitting diodes (LED).     

Red,Yellow, Blue and Green Emission from Eu<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript> Doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript>nano-Phosphors

Rare earth elements (RE = Eu³⁺& Dy³⁺)and Bi³⁺ doped Y₂O₃ nanoparticles were synthesized by urea hydrolysis method in ethylene glycol, which acts as reaction medium as well as a capping agent, at a low temperature of 140 °C,followed by calcination of the obtained product. Transmission electron microscope (TEM) images reveals that ovoid shaped Y₂O₃ nanoparticles of around 22–24 nm size range were obtained in this method. The respective RE and Bi³⁺ doped Y₂O₃ precursor nanoparticles when heated at 600 and 750 °C, retains the same shape as that of the as-synthesized Y₂O₃ precursor samples. From EDAX spectra, the incorporation of RE ions into the host has been studied. XRD pattern reveals the crystalline nature of the heated nanoparticles and indicate the absence of any impurity phase other than cubic Y₂O₃.However, the as-synthesized nanoparticles were highly amorphous without the presence of any sharp XRD peaks. Photoluminescence study suggests that the synthesized samples could be used as red (Eu³⁺), yellow (Dy³⁺), blue and green (Bi³⁺)emitting phosphors.     

luminescence of BaGa<Subscript>2</Subscript>Se<Subscript>4</Subscript> crystals activated by Eu<Superscript>2+</Superscript> and Ce<Superscript>3+</Superscript> ions

We have studied the effect of doping with Eu²⁺ and Ce³⁺ ions on the photoluminescence (PL) of BaGa₂Se₄ crystals in the temperature range 77–300 K. We have established that the broad bands with maxima at wavelengths 456 nm and 506 nm observed in the photoluminescence spectra of BaGa₂Se₄:Ce³⁺ crystals are due to intracenter transitions 5d → ²F_7/2 and 5d →²F_5/2 of the Ce³⁺ ions, while the broad photoluminescence band with maximum at 521 nm in the spectrum of BaGa₂Se₄:Eu²⁺ is associated with 4f⁶ 5d → 4f⁷ (⁸S_7/2) transitions of the Eu²⁺ ion. We show that in BaGa₂Se₄:Eu²⁺,Ce³⁺ crystals, excitation energy is transferred from the Ce³⁺ ions to the Eu²⁺ ions.     

Synthesis and luminescent properties of Eu<Superscript>3+</Superscript>- and Eu<Superscript>2+</Superscript>-activated sodium pyrophosphate Na<Subscript>4</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>

The luminescent properties of Eu³⁺ and Eu²⁺ ions in sodium pyrophosphate, Na₄P₂O₇, have been studied. The excitation spectrum of the Eu³⁺ emission in Na₄P₂O₇ consists of several sets of bands in the range 280–535 nm due to 4f–4f transitions of Eu³⁺ ions and a broad band with a maximum at about 240 nm interpreted to be due to a charge transfer (CT) transition from oxygen 2p states to empty states of the Eu³⁺ 4f⁶-configuration. Although the CT band energy is large enough, the quantum efficiency (η) of the Eu³⁺ emission in Na₄P₂O₇ under CT excitation was estimated to be very low (η ≤ 0.01). In terms of a configurational coordinate model, this fact is interpreted as a result of the high efficiency of a radiationless relaxation from the CT state to the ⁷F₀ ground state of Eu³⁺ ions occupying sodium sites in Na₄P₂O₇. A strong reducing agent is required in order to stabilize Eu²⁺ ions in Na₄P₂O₇ during the synthesis. Several nonequivalent Eu²⁺ luminescence centers in Na₄P₂O₇ were found.     

Formation of Eu<Superscript>2+</Superscript> and Eu<Superscript>3+</Superscript> centers in synthesis of CaF<Subscript>2</Subscript>:Eu luminophores

We have studied the effect of CaF₂:Eu luminophore synthesis methods on the charge state of europium. We have shown that Eu³⁺ predominates over Eu²⁺ in samples obtained by coprecipitation of europium with calcium fluoride, and the ratio Eu³⁺/Eu²⁺ grows as the total amount of europium increases. Partial charge conversion of the europium occurs during calcination of the samples, due to changes in the excess fluorine balance. We studied the luminescence, magnetic susceptibility, and EPR of the synthesized samples. We have shown that in a solid solution, europium forms large ordered clusters, determining both the luminescent and the magnetic properties of the material. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 773–779, November–December, 2007.     

Photolumiscent Properties of Nanorods and Nanoplates Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript>

Nanorods and nanoplates of Y₂O₃:Eu³⁺ powders were synthesized through the thermal decomposition of the Y(OH)₃ precursors using a microwave-hydrothermal method in a very short reaction time. These powders were analyzed by X-ray diffraction, field emission scanning electron microscopy, Fourrier transform Raman, as well as photoluminescence measurements. Based on these results, these materials presented nanoplates and nanorods morphologies. The broad emission band between 300 and 440 nm ascribed to the photoluminescence of Y₂O₃ matrix shifts as the procedure used in the microwave-hydrothermal assisted method changes in the Y₂O₃:Eu³⁺ samples. The presence of Eu³⁺ and the hydrothermal treatment time are responsible for the band shifts in Y₂O₃:Eu³⁺ powders, since in the pure Y₂O₃ matrix this behavior was not observed. Y₂O₃:Eu³⁺ powders also show the characteristic Eu³⁺ emission lines at 580, 591, 610, 651 and 695 nm, when excited at 393 nm. The most intense band at 610 nm is responsible for the Eu³⁺ red emission in these materials, and the Eu³⁺ lifetime for this transition presented a slight increase as the time used in the microwave-hydrothermal assisted method increases.     

Growth and synthesis of Sr<Subscript>3</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>8</Subscript>:Dy<Superscript>3+</Superscript> nanorod arrays by a solid state reaction method

Sr₃MgSi₂O₈:Dy³⁺ Nano-rods were synthesized by using solid state reaction method. The structural properties, morphology and band structure properties of the phosphor was studied. The structural properties were examined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Bonding behaviour of the phosphor was also determined by recording the FTIR spectra of the phosphor. Band structure i.e. band gap of the phosphor was determined by recording the absorption spectrum. The absorption spectrum was recorded for the sample and the band gap was determined by using Tauc plot. Band gap of the phosphor was found around 5.4 eV.     

On the Luminescence of Ce<Superscript>3+</Superscript>, Eu<Superscript>3+</Superscript>, and Tb<Superscript>3+</Superscript> in Novel Borate LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>

This paper reports on the photoluminescence (PL) and time-resolved properties of Ce³⁺, Eu³⁺, and Tb³⁺ in novel LiSr₄(BO₃)₃ powder phosphors. Ce³⁺ shows an emission band peaking at 420 nm under 350-nm UV excitation. Energy transfer from Ce³⁺ to Mn²⁺ takes place in the co-doped samples. Eu³⁺ shows red emission under near UV excitation. LiSr₄(BO₃)₃:Eu³⁺ phosphor could be a suitable candidate for phosphor-converted solid state lighting. The luminescence lifetime is 2.13 ms for Eu³⁺ in LiSr₄(BO₃)₃:0.001Eu³⁺. As Eu³⁺ concentration increasing, the decay curves deviate from exponential behavior. Tb³⁺ shows the strongest ⁵D₄→⁷ F₅ emission line at 540 nm. Decay curves of ⁵D₄→⁷ F₅ and ⁵D₃→⁷ F₅ emission with different Tb³⁺ concentrations were also measured. Cross-relaxation process is discussed based on the decay curves.     

Luminescence characteristics of energy transfer between Ce<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> in NaMgPO<Subscript>4</Subscript> phosphor

Powder samples of NaMgPO₄ doped with Eu²⁺ and Ce³⁺ were prepared and their photoluminescence spectra were systemically studied. Energy transfer from Ce³⁺ to Eu²⁺ in NaMgPO₄ phosphor was observed by investigating the optical properties from photoluminescence spectra in Eu²⁺ or Ce³⁺ singly doped and Eu²⁺–Ce³⁺ codoped sodium magnesium orthophosphates, NaMgPO₄. The enhancement of UV excitation is attributed to energy transfer from Ce³⁺ to Eu²⁺, and Ce³⁺ plays a role as a sensitizer. Ce³⁺–Eu²⁺ codoped NaMgPO₄ phosphors in which Eu²⁺ can be efficiently excited by 390 nm are potential candidates for phosphor-converted LEDs.     

Luminescence and energy transfer mechanism in Eu<Superscript>3+</Superscript>/Tb<Superscript>3+</Superscript>-co-doped ZrO<Subscript>2</Subscript> nanocrystal rods

Nanocrystal rods of Eu³⁺/Tb³⁺-co-doped ZrO₂ were synthesized using a simple chemical precipitation technique. Both ions were successfully doped into the Zr⁴⁺ ion site in a mixed structure containing both monoclinic and tetragonal phases. The Eu³⁺ or Tb³⁺ singly doped zirconia produced red and green luminescence which are characteristics of Eu³⁺ and Tb³⁺ ions, respectively. The co-doped zirconia samples produced blue emission from defect states transitions in the host ZrO₂, red and green luminescence from dopant ions giving cool to warm white light emissions. The phosphors were efficiently excited by ultraviolet and near-ultraviolet/blue radiations giving white and red light, respectively. The decay lifetime was found to increase with increasing donor ion concentration contrary to conventional observations reported by previous researchers. Weak quadrupole–quatdrupole multipolar process was responsible for energy transfer from Tb³⁺ (donor) ion to Eu³⁺ ion. No energy back-transfer from Eu³⁺ to Tb³⁺ ion was observed from the excitation spectra. Temperature-dependent photoluminescence shows the presence of defects at low temperature, but these defects vanished at room temperature and beyond. The Eu³⁺/Tb³⁺-co-doped ZrO₂ nanocrystal rod is a potential phosphor for white light application using UV as an excitation source. Thermoluminescence measurements show that the inclusion of Tb³⁺ ion increases trap depths in the host zirconia.     

Possibility of adjusting photoluminescence spectra of Ca scheelites (CaMoO<Subscript>4</Subscript>: Eu<Superscript>3+</Superscript> and CaWO<Subscript>4</Subscript>: Eu<Superscript>3+</Superscript>) to the emission spectrum of incandescent lamps

The peculiarities of the photoluminescence of compounds CaMoO₄: Eu³⁺ and CaWO₄: Eu³⁺ with the scheelite structure associated with a change in the short- and long-range orders of the crystal lattice upon a change in the activator (Eu³⁺) of the photoluminescence range in the interval 1–4 mol %, in which the photoluminescence of the matrix is preserved in the range 484–557 nm, are investigated using X-ray phase analysis as well as photoluminescence, Raman, and diffuse reflection spectroscopies. The introduction of Eu³⁺ ions leads to the reconstruction of the lattice so that up to 10% of these ions stimulate the formation of centrosymmetric localization upon the substitution of Ca²⁺ ions in the noncentrosymmetric positions. It is found that the spectral radiant emittance of the more effective luminophore CaMoO₄: Eu³⁺ can be adjusted to this parameter for an incandescent lamp for the Eu³⁺ concentration of 1–2 mol %.     

Synthesis and Optical Properties of Novel Red-Emitting PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu<Superscript>3+</Superscript> Phosphors

Undoped and PbNb₂O_6:Eu³⁺ (1.0 ≤ x ≤ 6.0 mol%) phosphors were synthesized at 1100 °C for 3.5 h by the conventional solid state reaction method. Synthesized PbNb₂O₆:Eu³⁺ phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS) and Photoluminescence (PL) analyses. The PL spectra showed series of excitation peaks between 350 and 430 nm due to the 4f–4f transitions of Eu³⁺. For 395.0 nm excitation, emission spectra of Eu³⁺ doped samples were observed at 591 nm (orange) and 614 nm (red) due to the ⁵D₀ → ⁷F₁ transitions and ⁵D₀ → ⁷F₂ transitions, respectively. PL analysis results also showed that the emission intensity increased by increasing Eu³⁺ ion content. No concentration quenching effect was observed. The CIE chromaticity color coordinates (x,y) of the PbNb₂O₆:Eu³⁺ phosphors were found to be in the red region of the chromaticity diagram.     

EPR of Gd<Superscript>3+</Superscript> ion in mixed CeO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystals

This paper reports on the results of EPR studies of mixed CeO₂-Y₂O₃ crystals (including nanosized crystals) doped by gadolinium ions. It is revealed that the width of the line corresponding to the allowed transition 1/2 ↔ −1/2 between the Kramers-conjugated states |±1/2〉 of the Gd³⁺ ion decreases with a decrease in the powder size from macrosizes to nanosizes. The observed dependence can be due to the increase in the unit cell size during grinding of the samples.     

Luminescence of Eu<Superscript>3+</Superscript> rare-earth ions in Lu<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

The kinetics of luminescence of Eu³⁺ ions in Lu₂O₃:Eu nanospheres with diameters of 100–270 nm and a small standard deviation of the size distribution <15% has been studied. A sharp decrease in the decay time of luminescence of Eu³⁺ ions in the red range with an increase in the diameter of nanospheres has been attributed to the appearance of a photon mode accelerating spontaneous luminescence, which is confirmed by the calculation of ranges of existence of whispering-gallery modes in studied nanospheres.     

Luminescence thermometry using Gd<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript>

In this paper we study the possibility of using the synthesized nanopowder samples of Gd₂Zr₂O₇:Eu³⁺ for temperature measurements by analyzing the temperature effects on its photoluminescence. The nanopowder was prepared by solution combustion synthesis method. The photoluminescence spectra used for analysis of Gd₂Zr₂O₇:Eu³⁺ nano phosphor optical emission temperature dependence were acquired using continuous laser diode excitation at 405 nm. The temperature dependencies of line emission intensities of transitions from ⁵D₀ and ⁵D₁ energy levels to the ground state were analyzed. Based on this analysis we use the two lines intensity ratio method for temperature sensing. Our results show that the synthesized material can be efficiently used as thermographic phosphor up to 650 K.     

Quantum cutting in Gd<Subscript>2</Subscript>SiO<Subscript>5</Subscript>: Eu<Superscript>3+</Superscript> by VUV excitation

The emission and excitation spectra of Gd₂SiO₅∶Eu³⁺ were investigated using the VUV beam line of the Beijing Synchrotron Radiation Facility (BSRF). The experimental results were discussed in the frame of visible quantum cutting process involved in Gd³⁺−Eu³⁺ system. Upon direct excitation into the⁶G _J states of Gd³⁺, two visible photon emissions from Eu³⁺ were observed. Cursory evaluation proved that Gd₂SiO₅∶Eu³⁺ is an efficient visible quantum cutter.     

Luminescent properties of SrMg<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript> as a potential phosphor for ultraviolet light-emitting diodes

Eu²⁺ and Mn²⁺ co-doped SrMg₂(PO₄)₂ phosphors with blue and red two emission bands were prepared by the high temperature solid state method and their luminescent properties have been investigated as a function of activator and co-activator concentrations. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the Eu²⁺ emission spectrum and the excitation spectrum of Mn²⁺. Efficiencies of energy transfer were also calculated according to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission. According to the principle of energy transfer, we demonstrated that the phosphor SrMg₂(PO₄)₂:Eu²⁺,Mn²⁺ with double emission bands exhibited a great potential as a phosphor for ultraviolet light-emitting diodes and the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺. PACS 78.55.-m     

Local structure of Gd<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> impurity centers in a CdF<Subscript>2</Subscript> crystal

The local crystal structure of Gd³⁺ and Eu²⁺ cubic impurity centers in cadmium fluoride is calculated within the shell model in the pair potential approximation. The local compressibility of the cationic and anionic sublattices of the host lattice is determined in the vicinity of the Gd³⁺ (Eu²⁺) impurity ion.     

Spontaneous luminescence of Eu<Superscript>3+</Superscript> ions in porous Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

A study of the luminescence of Eu³⁺ ions in Y₂O₃ nanospheres indicates a significant influence of the porous structure of nanoparticles on the luminescence of dopant ions. It is shown that filling the nanopores of initially porous Y₂O₃ nanospheres shortens the decay time of the spontaneous luminescence of doping europium ions. The change in the decay time is associated with the change in the effective refractive index of the porous nanospheres.     

Spectral-luminescent properties of Eu<Superscript>3+</Superscript> ions in inorganic D<Subscript>2</Subscript>O and POCl<Subscript>3</Subscript>-SnCl<Subscript>4</Subscript> solvents

Absorption and luminescence spectra of Eu³⁺ ions in D₂O and POCl₃-SnCl₄ inorganic solvents were measured. Oscillator strengths and spontaneous radiation transition probabilities for the most intense electron transitions in Eu³⁺ were calculated. Judd-Ofelt parameters, the radiative lifetime of the ⁵ D ₀ metastable level of Eu³⁺ in D₂O-Eu³⁺ and POCl₃-SnCl₄-Eu³⁺ solutions, and matrix elements for radiative transitions from the ⁵ D ₀ level were determined. The luminescence lifetime of the ⁵ D ₀ level of Eu³⁺ in these solutions was measured. The photoluminescence quantum yield for transitions from the ⁵ D ₀ level of Eu³⁺ in ⁵ D ₀ and POCl₃-SnCl₄-Eu³⁺ solutions was found to be 0.32 and 0.88, respectively.