Ni(II) and Zn(II) Complexes Containing Alkynyl Functionalized Salicylaldimine Ligand and Heterocyclic Coligand: Synthesis,Characterization and Luminescence Properties

Some nickel(II) and zinc(II) complexes of the type [Ni(L)(phen/bipy)]X (1a–6a) and [Zn(L) (phen/bipy)]X (1b–6b) (where L = 2-{(E)-[(4-trimethylsilylethynylphenyl)imino]methyl}-4-(4-nitro phenylethynyl)phenol; phen = 1, 10-phenanthroline, bipy = 2, 2´-bipyridine; X = ClO₄ ^?, BF₄ ^?, PF₆ ^?) have been prepared and characterized on the basis of elemental analyses, FTIR, ¹H NMR and mass spectral studies. The molecular structure of L was determined by single crystal X-ray diffraction studies. The electrochemical behaviour of the Ni(II) complexes indicate that the phen complexes appears at more positive potential as compared to those for bipy complexes, as a consequence of its strong π-acidic character. TGA was carried out to study the thermal behavior of the complexes. Room temperature luminescence is observed for all complexes corresponds to π → π* ILCT transition. The size of the counter anion and heterocyclic coligands phen and bipy shows marked effect on emission properties of the complexes.     

Luminescent Benzothiazole-Based Fluorophore of Anisidine Scaffoldings: a “Turn-On” Fluorescent Probe for Al<Superscript>3+</Superscript> and Hg<Superscript>2+</Superscript> Ions

A new anisidine possessing benzothiaozle-based chemosensor (1) has been designed and synthesized. The chemosensor 1 was designed to provide hard base environment for ratiometric detection of comparatively less studied Al³⁺ ions. In CH₃CN, the fluorescence spectra of chemosensor 1 red shifted from 368 to 430 nm with addition of Al³⁺ and Hg²⁺ ions; while Cu²⁺ ions caused quenching of emission intensity of 1. These differential changes observed with Al³⁺ and Cu²⁺ ions addition enabled chemosensor 1 to construct “NOR” and “TRANSFER” logic gates.     

A Colorimetric and Fluorescent Probe Based on Michael Acceptor Type Diketopyrrolopyrrole for Cyanide Detection

A new probe 1 was synthesized by incorporating an α,β-unsaturated ketone to a diketopyrrolopyrrole fluorophore. The probe exhibited a selective and sensitive response to cyanide against other anions. Addition of CN^? aqueous solution to 1 resulted in a rapid color change from pink to light yellow together with a blue shift from 518 to 421 nm, while other anions did not induce any significant color change. Furthermore, the Michael addition of cyanide to 1 elicited 98% fluorescence quenching at 608 nm, which constituted the fluorescence signature for cyanide detection. The detection limit was 0.67 μM using the fluorescence spectra changes, which was far lower than the WHO guideline of 1.9 μM. Moreover, 1-based test strips could successfully detect CN^? solutions.     

Synthesis and Evaluation of a Schiff-Based Fluorescent Chemosensors for the Selective and Sensitive Detection of Cu<Superscript>2+</Superscript> in Aqueous Media with Fluorescence Off-On Responses

Copper being an essential nutrient; also pose a risk for human health in excessive amount. A simple and convenient method for the detection of trace amount of copper was employed using an optical probe R1 based on Schiff base. The probe was synthesized by Schiff base condensation of benzyl amine and 2-hydroxy-1-napthaldehyde and characterized by single X-ray diffraction, ¹H NMR and FTIR. By screening its fluorescence response in a mixture of DMSO and H₂O (20:80, v/v) R1 displayed a pronounced enhancement in fluorescence only upon treatment with copper. Other examined metal ions such as alkali, alkaline and transition had no influence. Within a wide pH range 5–12 R1 could selectively detect copper by interrupting ICT mechanism that results in CHEF. From Job’s plot analysis a 2:1 binding stoichiometry was revealed. The fluorescence response was linear in the range 1–10?×?10^?9 M with detection limit 30?×?10^?9 M. Association constant was determined as 1?×?10¹¹ M^?2 by Benesi-Hilderbrand plot. As a fast responsive probe it possesses good reproducibility and was employed for detection of copper in different water samples.     

A Fluorescent Hypochlorite Probe Built on 1,10-Phenanthroline Scaffold and its Ion Recognition Features

In this study, the synthesis of 7-((Hydroxyimino)methyl)-1,10-phenanthroline-4-carbaldehyde oxime (1) in two steps starting from 4,7-dimethyl-1,10-phenanthroline (2) is reported. It is found that compound 1 can be used as a fluorogenic probe for the detection of hypochlorite ion in aqueous solution. NMR and mass spectral analysis indicate that probe 1 undergoes a chemical transformation through its oxime units upon treatment with hypochlorite, which results in a remarkable enhancement of the emission intensity. Also, metal ion recognition properties of probe 1 is investigated. It is noted that compound 1 is responsive to Zn²⁺, Cd²⁺, Ni²⁺ and Cu²⁺ metal ions, which reduced the emission intensity under identical conditions.

Open image in new window

Graphical Abstract The design, synthesis and properties of a new fluorescent hypochlorite probe is described. It is found that probe 1 immediately undergoes an oxidation reaction with NaClO through its oxime units in 0.1 M Na₂CO₃-NaHCO₃ buffer containing DMF (pH = 9.0, 30:1 v/v) at room temperature, which resulted in a remarkable enhancement of the emission intensity. It is noteworthy that this novel probe 1 is highly selective to hypochlorite ion when compared to some other ROS and anions. On the other hand, probe 1 also induces turn-off fluorogenic responses to metal ions such as Zn²⁺, Cd²⁺, Ni²⁺ and Cu²⁺ ions under identical conditions.

     

Thermal and electrochemical properties of poly(butylene sulfite)-based polymer electrolyte

Poly(butylene sulfite) (poly-1) was synthesized by cationic ring-opening polymerization of butylene sulfite (1), which was prepared by the reaction of 1,4-butanediol and thionyl chloride, with trifluoromethanesulfonic acid (TfOH) in bulk. The polymer electrolytes composed of poly-1 with lithium salts such as bis(trifluoromethanesulfonyl)imide (LiN(SO₂CF₃)₂, LiTFSI) and bis(fluorosulfonyl)imide (LiN(SO₂F)₂, LiFSI) were prepared, and their ionic conductivities, thermal, and electrochemical properties were investigated. Ionic conductivities of the polymer electrolytes for the poly-1/LiTFSI system increased with lithium salt concentrations, reached maximum values at the [LiTFSI]/[repeating unit] ratio of 1/10, and then decreased in further more salt concentrations. The highest ionic conductivity values at the [LiTFSI]/[repeating unit] ratio of 1/10 were 2.36?×?10^?4 S/cm at 80 °C and 1.01?×?10^?5 S/cm at 20 °C. On the other hand, ionic conductivities of the polymer electrolytes for the poly-1/LiFSI system increased with an increase in lithium salt concentrations, and ionic conductivity values at the [LiFSI]/[repeating unit] ratio of 1/1 were 1.25?×?10^?3 S/cm at 80 °C and 5.93?×?10^?5 S/cm at 20 °C. Glass transition temperature (T _g) increased with lithium salt concentrations for the poly-1/LiTFSI system, but T _g for the poly-1/LiFSI system was almost constant regardless of lithium salt concentrations. Both polymer electrolytes showed high transference number of lithium ion: 0.57 for the poly-1/LiTFSI system and 0.56 for the poly-1/LiFSI system, respectively. The polymer electrolytes for the poly-1/LiTFSI system were thermally more stable than those for the poly-1/LiFSI system.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

A Carbazole-Fused-RhodamineProbe for Detection of HOCl in Living Cells

A novel fluorescent probe CR-ClO for detection of HOCl based on a carbazole fused rhodamine was designed and synthesized. The probe utilized a HOCl-promoted oxidation reaction, which lead to the ring opening of the compound with a strong enhancement of the fluorescent emission at about 587 nm.The new probe CR-ClO has excellent selectivity and high sensitivity to ClO^?,whose detection limit to ClO^? is 1.16 × 10^?6 M. Furthermore, the new probe has been successfully applied in living cells for detection of ClO^?.     

Copper(I) Complexes of N-(2-{[(2E)-2-(4-Nitrobenzylidenyl)Hydrazinyl]Carbonyl}Phenyl)Benzamide and Triphenylphosphine: Synthesis,Characterization and Luminescence Properties

Copper(I) complexes of the formula [Cu(L)(PPh₃)₂]X (1–4) (X = Cl(1), ClO₄(2), BF₄(3) and PF₆(4)) [where L = N-(2-{[(2E)-2-(4-nitrobenzylidenyl)hydrazinyl]carbonyl}phenyl)benzamide; PPh₃ = triphenylphosphine] have been prepared by the condensation of N-[2-(hydrazinocarbonyl)phenyl]benzamide with 4-nitrobenzaldehyde followed by the reaction with CuCl, [Cu(MeCN)₄]ClO₄, [Cu(MeCN)₄]BF₄ and [Cu(MeCN)₄]PF₆ in presence of triphenylphosphine as a coligand. Complexes 1–4 were then characterized by elemental analyses, FTIR, UV-visible and ¹H NMR spectroscopy. Mononuclear copper(I) complexes 1–4 were formed with L in its keto form by involvement of azomethine nitrogen and the carbonyl oxygen along with two PPh₃ groups. A single crystal X-ray diffraction study of the representative complex [(Cu(L)(PPh₃)₂]CIO₄ (2) reveals a distorted tetrahedral geometry around Cu(I). Crystal data of (2): space group = C2/c, a = 42.8596 (9) Å, b = 14.6207 (3) Å, c = 36.4643 (7) Å, V = 20,653.7 (7) ų, Z = 16. Complexes 1–4 exhibit quasireversible redox behaviour corresponding to a Cu(I)/Cu(II) couple. All complexes show blue-green emission as a result of fluorescence from an intra-ligand charge transition (ILCT), ligand to ligand charge transfer transition (LLCT) or mixture of both. Significant increase in size of the counter anion shows marked effect on quantum efficiency and lifetime of the complexes in solution.     

Analytic Structure of Many-Body Coulombic Wave Functions

We investigate the analytic structure of solutions of non-relativistic Schrödinger equations describing Coulombic many-particle systems. We prove the following: Let ψ(x) with \({{\bf x} = (x_{1},\dots, x_{N})\in \mathbb {R}^{3N}}\) denote an N-electron wavefunction of such a system with one nucleus fixed at the origin. Then in a neighbourhood of a coalescence point, for which x ₁ = 0 and the other electron coordinates do not coincide, and differ from 0, ψ can be represented locally as ψ(x) = ψ ⁽¹⁾(x) + |x ₁|ψ ⁽²⁾(x) with ψ ⁽¹⁾, ψ ⁽²⁾ real analytic. A similar representation holds near two-electron coalescence points. The Kustaanheimo-Stiefel transform and analytic hypoellipticity play an essential role in the proof.     

Spectroscopic,Computational, Antimicrobial,DNA Interaction,In Vitro Anticancer and Molecular Docking Properties of Biochemically Active Cu(II) and Zn(II) Complexes of Pyrimidine-Ligand

Biochemically active Cu(II) and Zn(II) complexes [CuL(ClO₄)₂(1) and ZnL(ClO₄)₂(2)] have been synthesized from N,N donor Schiff base ligand L derived from4,6-dichloropyrimdine-5-carboxaldehyde with 4-(2-aminoethyl)morpholine. The L, complexes 1 and 2 have been structurally characterized by elemental analysis, ¹H-NMR, FTIR, MS, UV-Visible and ESR techniques. The results obtained from the spectral studies supports the complexes 1 and 2 are coordinated with L through square planar geometry. DFT calculations results supports, the ligand to metal charge transfer mechanism can occur between L and metal(II) ions. The antimicrobial efficacy results have been recommended that, complexes 1 and 2 are good anti-pathogenic agents than ligand L. The interaction of complexes 1 and 2 with calf thymus (CT) DNA has been studied by electronic absorption, viscometric, fluorometric and cyclic voltammetric measurements. The calculated K_b values for L, complexes 1 and 2 found from absorption titrations was 4.45?×?10⁴, L; 1.92?×?10⁵, 1 and 1.65?×?10⁵, 2. The Ksv values were found to be 3.0?×?10³, 3.68?×?10³and 3.52?×?10³ for L, complexes 1 and 2 by using competitive binding with ethidium bromide (EB). These results suggest that, the compounds are interacted with DNA may be electrostatic binding. The molecular docking studies have been carried out to confirm the interaction of compounds with DNA. Consequently, in vitro anticancer activities of L, complexes 1 and 2 against selected cancer (lung cancer A549, liver cancer HepG2 and cervical carcinoma HeLa) and normal (NHDF) cell lines were assessed by MTT assay.     

Coumarin Based Fluorescent Probe for Colorimetric Detection of Fe<Superscript>3+</Superscript> and Fluorescence Turn On-Off Response of Zn<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A new coumarin based Schiff-base chemosensor-(E)-7-(((8-hydroxyquinolin-2-yl)methylene) amino)-4-methyl-2H-chromen-2-one (H ₁₁ L) was synthesized and evaluated as a colorimetric sensor for Fe³⁺ and fluorescence “turn on-off” response of Zn²⁺ and Cu²⁺ using absorption and fluorescence spectroscopy. Upon treatment with Fe³⁺ and Zn²⁺, the absorption intensity as well as the fluorescence emission intensity increases drastically compared to other common alkali, alkaline earth and transition metal ions, with a distinct color change which provide naked eye detection. Formation of 1:1 metal to ligand complex has been evaluated using Benesi-Hildebrand relation, Job’s plot analyses, ¹H NMR titration as well as ESI-Mass spectral analysis. The complex solution of H ₁₁ L with Zn²⁺ ion exhibited reversibility with EDTA and regenerate free ligand for further Zn²⁺ sensing. H ₁₁ L exhibits two INHIBIT logic gates with two different chemical inputs (i) Zn²⁺ (IN1) and Cu²⁺ (IN2) and (ii) Zn²⁺ (IN1) and EDTA (IN2) and the emission as output. Again, an IMPLICATION logic gate is obtained with Cu²⁺ and EDTA as chemical inputs and emission as output mode. Both free ligand as well as metal-complexes was optimized using density functional theory to interpret spectral properties. The corresponding energy difference between HOMO-LUMO energy gap for H ₁₁ L, H₁₁L-Zn²⁺ and H₁₁L-Cu²⁺ are 2.193, 1.834 and 0.172 eV, respectively.     

A New Fluorescent “Turn-Off” Coumarin-Based Chemosensor: Synthesis,Structure and Cu-Selective Fluorescent Sensing in Water Samples

We report the synthesis and characterization two coumarin-based fluorescence probes, N′-{[7-(diethylamino)-2-oxo-2H-chromen-3-yl]carbonyl}pyridine-3-carbohydrazide (3) and N′-benzoyl-7-(diethylamino)-2-oxo-2H-chromene-3-carbohydrazide (4), proposed as a novel fluorescent chemosensor. The two probes designed showed an instant turn-off fluorescence response to Cu²⁺ over other metal ions in ethanol-water mixture based on intramolecular charge transfer (ICT). It was found that pyridine-analogue coumarin is highly selective and sensitive sensor for Cu²⁺. The 3 sensor coordinates Cu²⁺ in 1:1 stoichiometry with a binding constant, K_a = 5.22 M^?1 and the detection limit was calculated 1.97 × 10^?9 M.     

Special features of the electric components of acoustic waves in the vicinity of nonpiezoactive directions in crystals

The conditions of existence of the zero components of electric field E and electric induction D accompanying a volume acoustic wave propagating in a piezoelectric medium have been studied. General equations describing the positions of the zero-field lines E(m) = 0 and the zero-induction points m₀, such that D(m₀) = 0 on the unit sphere (m² = 1) of the wave propagation directions, are obtained. General theorems determining the conditions ensuring the existence of such lines and points, even in triclinic crystals, are formulated. The relationship between such directions and various elements of the crystal symmetry is analyzed. The vector fields D(m), which are always orthogonal to the wave normals m, in the vicinity of the zero-induction points m₀ exhibit certain orientational singularities characterized by the Poincaré indices n = 0, ±1, ±2. The general analytical expressions are obtained for the n values in crystals with arbitrary anisotropy and specified for a number of crystals belonging to various symmetry classes. The conditions of stability of the orientational singularities with respect to small perturbations of the material moduli and a change in the crystal symmetry are considered.     

A Water-Soluble Fluorescent Probe for SO<Subscript>2</Subscript> Derivatives in Aqueous Solution and Serum Based on Phenanthroimidazole Dye

A water-soluble fluorescent SO₂ derivatives probe PI-SO ₂ based on a phenanthroimidazole dye, and a sensitive SO₂ recognition site, aldehyde was constructed. The probe PI-SO ₂ exhibits desirable properties such as high sensitivity, high selectivity and good water-solubility. Significantly, we have demonstrated that the probe PI-SO ₂ is suitable for rapidly fluorescence detecting of SO₂ derivatives in aqueous solution and serum. The application of the novel probe PI-SO ₂ proved that it was not only a useful tool for the detection of SO₂ derivatives in vitro, but also a potential assay for investigating the effects of SO₂ derivatives, and demonstrating its value in practical applicationin of complex biological samples.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

Polymer electrolytes based on vinyl ethers with various EO chain length and their polymer electrolytes cross-linked by electron beam irradiation

Polymer electrolytes based on vinyl ethers with various ethyleneoxy (EO) chain length (poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5)) with lithium bis(trifluoromethanesulfonimide) (LiTFSI) were prepared, and effect of pendant EO chain length in the polymers on electrochemical and thermal properties was investigated. Glass transition temperature (T _g) of all polymer electrolytes increased linearly with an increase in salt concentrations. Ionic conductivities of the polymer electrolytes increased with an increase in the pendant EO chain length of the polymers at the constant [Li]/[O] ratio, but in the polymer electrolyte of the poly-1d (m?=?23.5) with the longest pendant EO chain length, ionic conductivity decreased in the low temperature range of ?20 to 10 °C due to the crystallization of the pendant EO chain. The highest ionic conductivity, 1.23?×?10^?4 S/cm at 30 °C, was obtained in the polymer electrolyte of the poly-1c (m?=?10) with pendant EO chain length of 10 at the [Li]/[O] ratio of 1/20. It was found that the cross-linking of the polymer electrolyte, composed of poly-1c (m?=?10) with LiTFSI at the [Li]/[O] ratio of 1/28, by electron beam (EB) irradiation may improve the mechanical property without affecting ionic conductivity, thermal property, and oxidation stability. Polymer electrolytes based on poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5) and cross-linked polymer electrolytes were electrochemically stable until 4 V and thermally stable around 300 °C.     

How Far can the Anisotropy Deviate from Uniaxiality in a Dy-Based Single-Molecule Magnet? Dinuclear Dy(III) Complex Study

The Dy^III ions in the dimer [Dy₂(H₂tea)₂(O₂CPh)₄]·2H₂O (1) (H₃tea = triethanolamine) have the 9-coordinate monocapped square-antiprismatic ligand field environment. Compound 1 shows slow relaxation of magnetization which is observable only with applied magnetic fields. This is consistent with the idea that low-symmetry ligand fields allow for the quantum tunneling of magnetization. This is reflected by the fact that there are no observable maxima in the out-of-phase ac susceptibility above 1.8 K. The {g}-tensor of the Dy^III ions {g _x = 11, g _y = 8.2, g _z = 1} further underlying the reduced uniaxiality in this system was determined in electron paramagnetic resonance (X- and Q-band) studies of 1 at temperatures down to 4 K.     

Atomistic Engineering of Chemiluminogens: Synthesis,Properties and Polymerization of 2,3-Dihydro-Pyrrolo[3,4-d]Pyridazine-1,4-Dione Scaffolds

Two chemiluminescent compounds containing 2,5-di(thien-2-yl)pyrrole and pyridazine units, namely 5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (5) and 6-phenyl-5,7-di(thiophen-2-yl)-2,3-dihydro-1H-pyrrolo[3,4-d]pyridazine-1,4(6H)-dione (6), were successfully synthesized and electrochemically polymerized. The compounds have chemiluminescent properties and glow in the presence of hydrogen peroxide in basic medium. The intensity of the glow can be increased dramatically by using Fe³⁺ ions, hemin (1.0 ppm) or blood samples (1.0 ppm) as catalyst. The compounds 5 and 6 have one well-defined irreversible oxidation peak at 1.08 V and 1.33 V vs Ag/AgCl, respectively. Electrochemical polymerization of both 5 and 6 were carried out successfully by repeating potential scanning in the presence of BF₃. Et2O in an electrolyte solution of 0.1 M LiClO₄ dissolved in acetonitrile. The electronic band gaps (E_g) of the polymers P5 and P6 were found to be 2.02 eV and 2.16 eV, respectively. On the other hand, the corresponding polymers are electroactive and exhibited electrochromic features.

Open image in new window

Graphical Abstract ?

     

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.