Enhanced photocatalytic activity of Cu-doped ZnO nanorods

Cu-doped ZnO nanorods with different Cu concentrations were synthesized through the vapor transport method. The synthesized nanorods were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and UV–vis spectroscopy. The XRD results revealed that Cu was successfully doped into ZnO lattice. The FE-SEM images showed that the undoped ZnO has needle like morphology whereas Cu-doped ZnO samples have rod like morphology with an average diameter and length of 60–90 nm and 1.5–3 μm respectively. The red shift in band edge absorption peak in UV-vis absorbance spectrum with increasing Cu content also confirm the doping of Cu in ZnO nanorods. The photocatalytic activity of pure and Cu-doped ZnO samples was studied by the photodegradation of resazurin (Rz) dye. Both pure ZnO and the Cu-doped ZnO nanorods effectively removed the Rz in a short time. This photodegradation of Rz followed the pseudo-first-order reaction kinetics. ZnO nanorods with increasing Cu doping exhibit enhanced photocatalytic activity. The pseudo-first-order reaction rate constant for 15 % Cu-doped ZnO is equal to 10.17×10^?2min^?1 about double of that with pure ZnO. The increased photocatalytic activity of Cu-doped ZnO is attributed to intrinsic oxygen vacancies due to high surface to volume ratio in nanorods and extrinsic defect due to Cu doping.     

Synthesis,structural, optical and magnetic properties of Cu-doped ZnO nanorods prepared by a simple direct thermal decomposition route

Cu-doped ZnO nanorods (i.e. Cu = 1.75, 3.55, 5.17 and 6.39 at.%) have been successfully synthesized by simple, direct, thermal decomposition of zinc and copper acetates in air at 300 °C for 6 h. The prepared samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD results indicate that the 1.75 at.% Cu-doped ZnO sample has a pure phase with the ZnO wurtzite structure, while the impurity phases are detected with increasing Cu concentrations. It was found that the doping of Cu results in a reduction of the preparation temperature. The optical properties of the samples were also investigated by UV–visible spectroscopy and photoluminescence measurements. The results show that the Cu doping causes the change in energy-band structures and effectively adjusts the intensity of the luminescence properties of ZnO nanorods. X-ray photoelectron spectroscopy analysis implies that there are some oxygen vacancies in the samples and also indicates that all the doped samples are associated with the mixture of Cu ion states (Cu²⁺ and Cu¹⁺/Cu⁰). Magnetic measurements by vibrating sample magnetometry indicate that undoped ZnO is diamagnetic, whereas all of the Cu-doped ZnO samples exhibit room temperature ferromagnetic behavior. We suggest that Cu substitution and density of oxygen vacancies (V _o) may play a major role in the room temperature magnetism of the Cu-doped ZnO samples.     

The effect of Al doping on the morphology and optical property of ZnO nanostructures prepared by hydrothermal process

The undoped and Al-doped ZnO nanostructures were fabricated on the ITO substrates pre-coated with ZnO seed layers using the hydrothermal method. The undoped well-aligned ZnO nanorods were synthesized. When introducing the Al dopant, ZnO shows various morphologies. The morphology of ZnO changes from aligned nanorods, tilted nanorods, nanotubes/nanorods to the nanosheets when the Al doping concentrations increase. The ZnO nanostructures were characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, photoluminescence and Raman technology. The Al doping concentrations play an important role on the morphology and optical properties of ZnO nanostructures. The possible growth mechanism of the ZnO nanostructures was discussed.     

Microstructures and optical properties of Cu-doped ZnO films prepared by radio frequency reactive magnetron sputtering

Pure and Cu-doped ZnO (ZnO:Cu) thin films were deposited on glass substrates using radio frequency (RF) reactive magnetron sputtering. The effect of substrate temperature on the crystallization behavior and optical properties of the ZnO:Cu films have been studied. The crystal structures, surface morphology and optical properties of the films were systematically investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and a fluorescence spectrophotometer, respectively. The results indicated that ZnO films showed a stronger preferred orientation toward the c-axis and a more uniform grain size after Cu-doping. As for ZnO:Cu films, the full width at half maxima (FWHM) of (0 0 2) diffraction peaks decreased first and then increased, reaching a minimum of about 0.42° at 350 °C and the compressive stress of ZnO:Cu decreased gradually with the increase of substrate temperature. The photoluminescence (PL) spectra measured at room temperature revealed two blue and two green emissions. Intense blue-green luminescence was obtained from the sample deposited at higher substrate temperature. Finally, we discussed the influence of annealing temperature on the structural and optical properties of ZnO:Cu films. The quality of ZnO:Cu film was markedly improved and the intensity of blue peak (∼485 nm) and green peak (∼527 nm) increased noticeably after annealing. The origin of these emissions was discussed.     

Effects of the oxygen partial pressure and annealing atmospheres on the microstructures and optical properties of Cu-doped ZnO films

Cu-doped zinc oxide (ZnO:Cu) films were deposited on p-Si (1 0 0) substrates at 200 °C under various oxygen partial pressures by using radio frequency reactive magnetron sputtering. The properties of the films were characterized by the X-ray diffraction spectroscopy (XRD), energy dispersive spectrometer, X-ray photoelectron spectroscopy (XPS) and fluorescence spectrophotometer with the emphasis on the evolution of microstructures, element composition, valence state of Cu, optical properties. The results indicated that the properties of ZnO:Cu films were significantly affected by oxygen partial pressures. XRD measurements revealed that the sample prepared at the ratio of O₂:Ar of 15:10 sccm had the best crystal quality among all ZnO:Cu films. XPS analysis results suggested that the valence of Cu in the ZnO films was a mixed state of +1 and +2, and the integrated intensity ratio of Cu²⁺ to Cu⁺ increased with the increment of oxygen partial pressure. The photoluminescence measurements at room temperature revealed a violet, two blue and a green emission. We considered that the origin of green emission came from various oxygen defects when the ZnO:Cu films grew in oxygen poor and enriched environment. Furthermore, the influence of annealing atmosphere on the microstructures and optical properties of ZnO:Cu films were discussed.     

Effect of Mn doping on the microstructures and photoluminescence properties of CBD derived ZnO nanorods

Mn-doped ZnO nanorods were synthesized from aqueous solutions of zinc nitrate hexahydrate, manganese nitrate and methenamine by the chemical solution deposition method (CBD). Their microstructures, morphologies and optical properties were studied in detail. X-ray diffraction (XRD) results illustrated that all the diffraction peaks can be indexed to ZnO with the hexagonal wurtzite structure. Scanning electron microscope (SEM) results showed that the average diameter of Mn-doped ZnO nanorods was larger than that of the undoped one. Photoluminescence (PL) spectra indicated that manganese doping suppressed the emission intensity and caused the blue shift of UV emission position compared with the undoped ZnO nanorods. In the Raman spectrum of Mn-doped ZnO nanorods, an additional mode at about 525 cm⁻¹ appeared which was significantly enhanced and broadened with the increase of Mn doping concentration.     

Fabrication and properties of ZnO:Cu and ZnO:Ag thin films

Thin films of ZnS and ZnO:Cu were grown by an original metal–organic chemical vapour deposition (MOCVD) method under atmospheric pressure onto glass substrates. Pulse photo-assisted rapid thermal annealing of ZnO:Cu films in ambient air and at the temperature of 700–800 C was used instead of the common long-duration annealing in a vacuum furnace. ZnO:Ag thin films were prepared by oxidation and Ag doping of ZnS films. At first a closed space sublimation technique was used for Ag doping of ZnO films. The oxidation and Ag doping were carried out by a new non-vacuum method at a temperature >500 C. Crystal quality and optical properties were investigated using X-ray diffraction (XRD), atomic force microscopy (AFM), and photoluminescence (PL). It was found that the doped films have a higher degree of crystallinity than undoped films. The spectra of as-deposited ZnO:Cu films contained the bands typical for copper, i.e. the green band and the yellow band. After pulse annealing at high temperature the 410 and 435 nm photoluminescent peaks were observed. This allows changing of the emission colour from blue to white. Flat-top ZnO:Ag films were obtained with the surface roughness of 7 nm. These samples show a strong ultraviolet (UV) emission at room temperature. The 385 nm photoluminescent peak obtained is assigned to the exciton–exciton emission.     

The microstructures and the electrical and optical properties of ZnO:N films prepared by thermal oxidation of Zn3N2 precursor

Samples of p-type ZnO:N films were prepared on glass substrates by thermal oxidation of Zn₃N₂ precursor, which was produced by reactive magnetron sputtering with a metallic zinc target in Ar/N₂ working gas. The microstructures and the electrical and optical properties of the samples were systematically investigated as a function of the annealing temperature. The results indicate that the annealing temperature has strong effects on the conductivity and photoluminescence (PL) properties of the obtained ZnO:N films. With an annealing temperature of 500 ^°C in oxygen flux, ZnO:N samples show the best p-type characteristics. The doping mechanism and the doping efficiency are briefly discussed based on the experimental results.     

Growth of ZnO nanorod arrays by sol–gel method: transition from two-dimensional film to one-dimensional nanostructure

ZnO nanorod arrays were prepared by a sol–gel method in the present work. The effects of doping concentration and annealing time on the morphologies of ZnO:Al (ZAO) layers were investigated to clearly explore the growth process of ZnO nanorods by designing gradient structures and adjusting the annealing time. The results show that the doping level in the films is a key factor for the formation of nanorods and they cannot form at a low doping level. Out-of-plane anisotropic grain growth instead of the traditional in-plane coarsening process is observed with increasing annealing time. The growth model of nanorods is proposed in terms of the surface diffusion and Ehrlich–Schwoebel barrier (ES barrier) theory.     

The structural and optical properties of ZnO nanorod arrays

High quality vertical-aligned ZnO nanorod arrays were synthesized by a simple vapor transport process on Si (111) substrate at a low temperature of 520 °C. Field-emission scanning electron microscopy (FESEM) showed the nanorods have a uniform length of about 1 μm with diameters of 40-120 nm. X-ray diffraction (XRD) analysis confirmed that the nanorods are c-axis orientated. Selected area electron diffraction (SAED) analysis demonstrated the individual nanorod is single crystal. Photoluminescence (PL) measurements were adopted to analyze the optical properties of the nanorods both a strong UV emission and a weak deep-level emission were observed. The optical properties of the samples were also tested after annealing in oxygen atmosphere under different temperatures, deep-level related emission was found disappeared at 600 °C. The dependence of the optical properties on the annealing temperatures was also discussed.     

纳米ZnO生长及性质分析

利用低压金属有机化学气相沉积(LP-MOCVD)技术,在表面含有ZnO颗粒作为催化剂的Si(111)衬底上制备了ZnO纳米柱阵列。采用X射线衍射(XRD)、喇曼光谱(Raman)、扫描电子显微镜(SEM)、光致发光(PL)谱分析了样品的晶体结构质量、表面性质和光学性质。结果表明,生长出来的纳米ZnO具有较好的c轴择优取向性。发现氧分压对ZnO纳米柱的生长有重要影响:当氧分压较低时,生长基于VLS机制;当氧分压较高时,生长基于VS机制;通过对N2O流量的控制可实现对ZnO纳米材料的可控生长。     

Blue luminescence from Ce-doped ZnO thin films prepared by magnetron sputtering

The photoluminescence properties of undoped and Ce-doped ZnO thin films that were prepared by DC magnetron sputtering were investigated. It was found that the incorporation of Ce could intensively affect the structural, optical, and photoluminescence properties of the ZnO thin films. The undoped ZnO thin films showed a sharp UV luminescence, whereas the Ce-doped ZnO thin films showed a broad blue luminescence. The effects of excitation wavelength and annealing atmosphere on the photoluminescence properties of Ce-doped ZnO thin films were also studied. After post-annealing in air and oxygen atmospheres, the blue emissions of the prepared films were drastically suppressed. Our results indicate that the blue emissions of Ce-doped ZnO thin films are related to zinc interstitials and the intrinsic transition of Ce³⁺ ions.     

Effect of KOH molarity and annealing temperature on ZnO nanostructure properties

In this work, ZnO nanorods (NRs) were fabricated using a low cost chemical bath deposition (CBD) method. The effect of the potassium hydroxide concentration on the fabricated ZnO nanostructures was studied in depth. The optical, structure, and surface morphology properties of the fabricated ZnO nanostructures were investigated using Uv-vis spectroscopy, XRD, and SEM. The results indicate that the formation of hexagonally structured ZnO nanorods with different lengths and diameters was dependent on the KOH concentration. The sample prepared with 2 M of KOH was the best one for optoelectronic applications, since it has the smallest diameters. This sample was annealed at different temperatures (473 K–1073 K). Positron Annihilation Lifetime Spectroscopy was used to determine the defects in the ZnO nanorods. The results show that the positron mean lifetime (τ_m) decreased as the annealing temperature increased, which means that the overall defects in the ZnO nanorods decreased with increasing temperature. Consequently, higher performance semiconductor devices based on ZnO nanorods could be fabricated after high annealing of the ZnO nanorods.     

Structural, morphological and photoluminescence properties of W-doped ZnO nanostructures

W-doped ZnO nanostructures were synthesized at substrate temperature of 600 °C by pulsed laser deposition (PLD), from different wt% of WO₃ and ZnO mixed together. The resulting nanostructures have been characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy and photoluminescence for structural, surface morphology and optical properties as function of W-doping. XRD results show that the films have preferred orientation along a c-axis (0 0 L) plane. We have observed nanorods on all samples, except that W-doped samples show perfectly aligned nanorods. The nanorods exhibit near-band-edge (NBE) ultraviolet (UV) and violet emissions with strong deep-level blue emissions and green emissions at room temperature.     

A simple growth route towards ZnO thin films and nanorods

Highly orientated ZnO thin films and the self-organized ZnO nanorods can be easily prepared by a simple chemical vapor deposition method using zinc acetate as a source material at the growth temperature of 180 and 320 °C, respectively. The ZnO thin films deposited on Si (100) substrate have good crystallite quality with the thickness of 490 nm after annealing in oxygen at 800 °C. The ZnO nanorods grown along the [0001] direction have average diameter of 40 nm with length up to 700 nm. The growth mechanism for ZnO nanorods can be explained by a vapor-solid (VS) mechanism. Photoluminescence (PL) properties of ZnO thin films and self-organized nanorods were investigated. The luminescence mechanism for green band emission was attributed to oxygen vacancies and the surface states related to oxygen vacancy played a significant role in PL spectra of ZnO nanorods.     

Hydrothermal synthesis and characterization of ZnO films with different nanostructures

ZnO films with morphologies of nanorods, nanowires and nanosheets were grown on F-doped SnO₂ glass substrate, which may have potential application in solar cells. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the structures and morphologies of the as-synthesized samples. The photoluminescence (PL) and the photoelectrochemical properties of ZnO films were also measured. The results showed that ZnO nanorods preferentially oriented along the c-axis and had the largest photocurrent density which is as high as 60 μA/cm².     

A comparative study of the microstructures and optical properties of Cu- and Ag-doped ZnO thin films

Cu- and Ag-doped ZnO films were deposited by direct current co-reactive magnetron sputtering technique. The microstructure, the chemical states of the oxygen, zinc, copper and silver and the optical properties in doped ZnO films were investigated by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS) and UV-Visible spectroscopy. XRD analysis revealed that both of Cu- and Ag-doped ZnO films consist of single phase ZnO with zincite structure while the doping elements had an evident effect on the (0 0 2) preferential orientation. The XPS spectra showed that the chemical states of oxygen were different in Cu- and Ag-doped ZnO thin films, which may lead to the shift of the band gap as can be observed in the transmittance and absorption spectra. Meanwhile, the widths of band tails of ZnO films became larger after Cu and Ag doping.     

Studies on structural and magnetic properties of Co-doped pyramidal ZnO nanorods synthesized by solution growth technique

Large-area arrays of highly oriented Co-doped ZnO nanorods with pyramidal hexagonal structure are grown on silica substrates by wet chemical decomposition of zinc–amino complex in an aqueous medium. In case of undoped ZnO with an equi-molar ratio of Zn²⁺/hexamethylenetetramine (HMT), highly crystalline nanorods were obtained, whereas for Co-doped ZnO, good quality nanorods were formed at a higher Zn²⁺/HMT molar ratio of 4:1. Scanning electron microscope (SEM) studies show the growth of hexagonal-shaped nanorods in a direction nearly perpendicular to the substrate surface with a tip size of ～50 nm and aspect ratio around 10. The XRD studies show the formation of hexagonal phase pure ZnO with c-axis preferred orientation. The doping of Co ions in ZnO nanorods was confirmed by observation of absorption bands at 658, 617 and 566 nm in the UV–vis spectra of the samples. The optical studies also suggest Co ions to be present both in +2 and +3 oxidation states. From the photoluminescence studies, a defect-related emission is observed in an undoped sample of ZnO at 567 nm. This emission is significantly quenched in Co-doped ZnO samples. Further, the Co-doped nanorods have been found to show ferromagnetic behavior at room temperature from vibrating sample magnetometer (VSM) studies.     

The effect of pre-annealing of sputtered ZnO seed layers on growth of ZnO nanorods through a hydrothermal method

Oriented ZnO nanorods were grown on ion-beam-sputtered ZnO seed layers through a hydrothermal approach without any metal catalyst. The sputtered ZnO seed layers were pre-annealed at different temperatures before the growth of ZnO nanorods. The effects of pre-annealing of the ZnO seed layers on the growth rate, crystallinity and optical properties of ZnO nanorods thereon were studied. The obtained ZnO nanorods had a wurtzite structure and grew along the preferential [0001] orientation with a normal direction to the substrates. Results show that the growth rate and density of the ZnO nanorods strongly depend on the pre-treatment conditions of the ZnO seed layer. With higher pre-treatment temperature, the crystallinity and surface characteristics of the ZnO seed layer were improved and thereafter the growth rate of ZnO nanorods thereon increased. Photoluminescence spectroscopy results show that the UV emission also becomes stronger and sharper with increasing annealing temperature of the ZnO seed layer.     

Fabrication of Br doped ZnO nanosheets piezoelectric nanogenerator for pressure and position sensing applications

In this research, a unique strategy was developed to enhance the output performance of 2D ZnO nanosheets based piezoelectric nanogenerator (PENG). The Br doped 2D ZnO nanosheets were fabricated by facile hydrothermal method on nanoporous anodic aluminum oxide (AAO) template. Along with structural and optical characterization of Br doped 2D ZnO nanosheets, the electrical output performance of Br doped 2D ZnO PENG was demonstrated under external mechanical force. The corresponding output voltage of Br doped 2D ZnO nanosheets PENG reached to 8.82 V at 6HZ, which is 3 times higher than undoped ZnO nanosheets PENG. The output power density of Br doped 2D ZnO nanosheets PENG reached to 38.8962μWcm⁻² at an external load resistanec of about 2 MΩ. The Br doping in ZnO nanosheets significantly increased the sensitivity of PENG for pressure sensing and the flexibility of PENG contribute in the application of position sensing.