A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

Coumarin Based Fluorescent Probe for Colorimetric Detection of Fe<Superscript>3+</Superscript> and Fluorescence Turn On-Off Response of Zn<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A new coumarin based Schiff-base chemosensor-(E)-7-(((8-hydroxyquinolin-2-yl)methylene) amino)-4-methyl-2H-chromen-2-one (H ₁₁ L) was synthesized and evaluated as a colorimetric sensor for Fe³⁺ and fluorescence “turn on-off” response of Zn²⁺ and Cu²⁺ using absorption and fluorescence spectroscopy. Upon treatment with Fe³⁺ and Zn²⁺, the absorption intensity as well as the fluorescence emission intensity increases drastically compared to other common alkali, alkaline earth and transition metal ions, with a distinct color change which provide naked eye detection. Formation of 1:1 metal to ligand complex has been evaluated using Benesi-Hildebrand relation, Job’s plot analyses, ¹H NMR titration as well as ESI-Mass spectral analysis. The complex solution of H ₁₁ L with Zn²⁺ ion exhibited reversibility with EDTA and regenerate free ligand for further Zn²⁺ sensing. H ₁₁ L exhibits two INHIBIT logic gates with two different chemical inputs (i) Zn²⁺ (IN1) and Cu²⁺ (IN2) and (ii) Zn²⁺ (IN1) and EDTA (IN2) and the emission as output. Again, an IMPLICATION logic gate is obtained with Cu²⁺ and EDTA as chemical inputs and emission as output mode. Both free ligand as well as metal-complexes was optimized using density functional theory to interpret spectral properties. The corresponding energy difference between HOMO-LUMO energy gap for H ₁₁ L, H₁₁L-Zn²⁺ and H₁₁L-Cu²⁺ are 2.193, 1.834 and 0.172 eV, respectively.     

A Turn-on Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> Based on Quinoline in Aqueous Media

A simple “off-on fluorescence type” chemosensor 1 3-((2-(dimethylamino)ethyl)amino)-N-(quinolin-8-yl)propanamide has been synthesized for Zn²⁺. The receptor 1 comprises the quinoline moiety as fluorophore and the N,N^′-dimethylethane-1,2-diamine as a binding site. 1 showed a remarkable fluorescence enhancement in the presence of Zn²⁺ in aqueous solution. Importantly, the chemosensor 1 could be used to detect and quantify Zn²⁺ in water samples. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. The binding properties of 1 with Zn²⁺ ions were investigated by UV-vis, fluorescence, electrospray ionization mass spectroscopy and ¹H NMR titration.     

8-Hydroxyquinoline Functionalized Graphene Oxide: an Efficient Fluorescent Nanosensor for Zn<Superscript>2+</Superscript> in Aqueous Media

A nanosensor, based on 8-hydroxyquinoline functionalized graphene oxide, was developed for the fluorescence detection of Zn²⁺. It showed high selectivity and sensitivity for Zn²⁺ion in aqueous solution over other metal ions such as Li⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Fe²⁺, Fe³⁺and Cr³⁺. Due to the linearity of the emission intensity toward Zn²⁺ concentration, fluorescent technique could be used for the detection of Zn²⁺ ion even at very low concentrations.     

A highly Sensitive Turn-on Fluorescent Sensor for Ba<Superscript>2+</Superscript> Based on G-Quadruplexes

A G-quadruplex-based fluorescent biosensor for highly sensitive detection of barium ion (Ba²⁺) was constructed for the first time. In the absence of Ba²⁺, the G-quadruplex-specific fluorescence ligand N-methyl mesoporphyrin IX (NMM) remained weakly fluorescent when coexisted with a single-stranded G-quadruplex sequence AGRO100. Upon addition of Ba²⁺, AGRO100 was folded into G-quadruplex structures with the aid of Ba²⁺, which bound with NMM by stacking forces and significantly enhanced its fluorescence. The maximum fluorescence intensity of NMM was increased by ca. 22-fold in response to 1 μM Ba²⁺. This simple method exhibites a good linear relationship in the range of 0–600 nM with the detection limit of 4 nM. The detection method is turn-on, fast, economic, high in signal-to-noise ratio and free of participation of toxic organic solvents, demonstrating its great potential for on-site and real-time Ba²⁺ detection.     

Synthesis and Properties of a Novel FRET-Based Ratiometric Fluorescent Sensor for Cu<Superscript>2+</Superscript>

A novel FRET-based probe LS3 was designed and synthesized. As expected, it exhibited high selectivity and sensitivity for detecting Cu²⁺ over other commonly coexistent metal ions. The detection limit was measured to be 0.0423 μM for Cu²⁺, which can meet the selective requirements for practical application. In addition, the newly synthesized compound 3a/b have potential value of further synthesizing more analogous FRET-based probes.     

Highly Selective and Anions Controlled Fluorescent Sensor for Hg<Superscript>2+</Superscript> in Aqueous Environment

A highly selective PET fluorescent sensor B1 for Hg²⁺ containing a BODIPY fluorophore and a NS₂O₂ penta-chelating receptor has been synthesized and characterized. Its absorption maximum wavelength (498 nm) and emission maximum wavelength (512 nm) are both in the visible range. The fluorescence quantum yields of the B1 and Hg²⁺-bound states of BHg1 are 0.008 and 0.58 in 70% aqueous ethanol solution, respectively. The pKa of 1.97 is the lowest in metal ions PET chemo sensors reported up till now as we know. Thus, B1 can detect the Hg²⁺ in a wide pH span, which indicates that it has more potential and further practical applications for biology and toxicology. Furthermore, BHg1 also displays response to some anions such as Cl⁻(Br⁻), , SCN⁻ and CH₃COO⁻, which is attributed to the significant coordinating ability of these anions to Hg²⁺.     

A Dual-Target Fluorescent Probe with Response-Time Dependent Selectivity for Cd<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A novel fluorescent probe (NT) was developed by merging 2-hydrazinylbenzothiazole with 2-hydroxy-1-naphthaldehyde for the detection of Cd²⁺ and Cu²⁺. The probe alone is almost nonfluorescent due to the isomerization of C=N in the excited state. The addition of Cd²⁺ can cause an immediate strong green fluorescence owing to the suppression of C=N isomerization by Cd²⁺-coordination. Furthermore, NT gives a delayed turn-on fluorescence response to Cu²⁺ although it is a vigorous fluorescence quencher, which was thanks to the inhibition of the electron transfer between excited fluorophore and paramagnetic Cu²⁺ by sulfur donor. Based on fluorescence spectra and ESI-MS analysis, the binding modes between NT and Cd²⁺/Cu²⁺ were proposed.     

Organic Material Based Fluorescent Sensor for Hg<Superscript>2+</Superscript>: a Brief Review on Recent Development

Due to the deleterious effects of mercury on human health and natural ecosystems, high reactivity, non-degradability, extreme volatility and relative water and tissue solubility, it would consider as one of the most toxic environmental pollutants among the transition metals. In the present investigation, we have tried to summarized the several organic material based fluorescent sensor including rhodamine, boron-dipyrromethene (BODIPYs), thiourea, crown-ether, coumarine, squaraines, pyrene, imidazole, triazole, anthracene, dansyl, naphthalenedimide/ naphthalene/ naphthalimide, naphthyridine, iridium (III) complexes, polymeric materials, cyclodextrin, phthalic anhydride, indole, calix [4]arene, chromenone, 1,8-naphthalimides, lysine, styrylindolium, phenothiazine, thiocarbonyl quinacridone, oxadiazole, triphenylamine–triazines, tetraphenylethene, peptidyl and semicarbazone for the trace mercury detection in the aqueous, aqueous–organic and cellular media. The present review provides a brief look over the previous development in the organic material based fluorescent sensor for mercuric ion detection. Furthermore, the ligand-metal binding stoichiometry, binding/association/dissociation constants and the detection limit by the receptors have been particularly highlighted which might be useful for the future design and development of more sensitive and robust fluorescent chemosensor/chemodosimeter for the mercuric ion detection.

Open image in new window

Graphical Abstract Dummy

     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

Synthesis of Two Coumarin-Derived Schiff Bases and Investigation of theirs Selectivity for Zn<Superscript>2+</Superscript>

In this study, the coumarin-derived schiff bases (HL₁ and HL₂) have been designed and synthesized. Upon the addition of Zn²⁺, both of them show significant fluorescence enhancement owing to inhibits PET and ESIPT process respectively. However, the receptor HL₂ response toward Cd²⁺, Mg²⁺, Ba²⁺, Ca²⁺ besides Zn²⁺ and exhibits fluorescence enhancement but not enough to detection of the concentration levels of Zn²⁺.     

A New Fluorescent Chemosensor Detecting Co<Superscript>2+</Superscript> and K<Superscript>+</Superscript> in DMF Buffered Solution

A new fluorescent chemosensor 2-(2-thiophene)imidazo [4,5,f]-1,10-phenanthroline (L) was prepared and characterized. By adding univalent or divalent metal ions such as Na⁺, K⁺, Mg²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Zn²⁺, Cd²⁺ and Hg²⁺ ions into the solution of L in DMF under buffered conditions with the working pH ranging from 7.0 to 8.0, we found that L could be used to detect K⁺ ratiometricly and it could also be applied to sense Co²⁺ with the phenomenon of fluorescence quenching of L. While the response behavior of L was not discernibly affected by other examined metal ions.     

Photoluminescence of nanostructured Zn<Subscript>2</Subscript>SiO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript> ceramics under UV and VUV excitation

The photoluminescence of Zn₂SiO₄:Mn²⁺ ceramics with a particle size of 120 ± 10 nm, which is excited in the range of 3.5–5.8 eV and subjected to synchrotron radiation with photon energies of up to 20 eV, is investigated. Nanoscale Zn₂SiO₄:Mn²⁺ ceramics possesses intense luminescence with a maximum of 2.34 eV, the position and half-width of the band are independent of the excitation energy. It is found that the photoluminescence at 2.34 eV decays nonexponentially upon ultraviolet excitation. In the case of nanoscale ceramics is irradiated by vacuum ultraviolet, an additional photoluminescence-excitation channel is likely to occur due to interaction of band states and intrinsic vacancy-like defects of the Zn₂SiO₄ matrix.     

Investigating <Superscript>64</Superscript>Zn<Superscript>+</Superscript> ion-doped silicon under conditions of hot implantation

The results from visualizing the structure and identifying the composition of surface and the nearsurface layers of CZ n-Si (100) implanted by ⁶⁴Zn⁺ ions with dose of 5 × 10¹⁶ cm^–2 and energy of 50 keV under conditions of a substrate heated to 350°C are presented. It is found that there is no Si amorphization after Zn implantation, and only one layer 200 nm thick forms and is damaged because of radiation-induced defects. Zn nanoparticles 10–100 nm in size are found on a sample’s surface and in its near-surface layer. Computer analysis and mapping of the elemental and phase composition of FIB crater walls and the surface show that the main elements (54%) in the sample near-surface layer are Si, O, and Zn. The presence of ZnO phase is recorded to a depth of 20 nm in the sample.     

Neutron transition densities for the 2<Superscript> + </Superscript>-8<Superscript> + </Superscript> multiplet of states in <Superscript>90</Superscript>Zr

Neutron transition densities for the 2 ⁺ -8 ⁺ levels in ⁹⁰Zr were extracted in the process of analyzing scattering at 400 MeV. They were compared with the calculated neutron transition densities and with the experimental proton transition densities. Radial distributions of the experimental neutron and proton transition densities for each state were found to be different.Received: 9 January 2004, Revised: 4 April 2004, Published online: 14 September 2004PACS: 25.40.Ep Inelastic proton scattering - 21.10.-k Properties of nuclei; nuclear energy levels     

Local structure of Zn<Superscript>2+</Superscript> impurity centers in a LiF: U,Zn crystal

The local structure of Zn²⁺ impurity centers in a uranium-activated lithium fluoride crystal LiF: U,Zn is calculated in the framework of the shell model in the pair potential approximation.     

Adiabatic elastic moduli in ZnSe : Mn<Superscript>2+</Superscript> and ZnSe : V<Superscript>2+</Superscript> crystals

The temperature dependences of the elastic moduli C ₄₄ (C ₁₁ ? C ₁₂)/2 and C _l = (C ₁₁ + C ₁₂ + 2C ₄₄)/2 of ZnSe : V²⁺ (impurity concentration, 6 × 10¹⁸ cm^?3) and ZnSe : Mn²⁺ (9.4 × 10²⁰ cm^?3) are measured in the temperature range 1.4–100.0 K at frequencies of 52 and 156 MHz. The temperature dependences of the adiabatic elastic moduli are derived. It is established that softening of the symmetry modules is observed only in the crystal with an impurity having orbitally degenerate states.     

Hexa-BODIPY Linked-Triazole Based on a Cyclotriphosphazene Core as a Highly Selective and Sensitive Fluorescent Sensor for Fe<Superscript>2+</Superscript> Ions

A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe²⁺ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe²⁺ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe²⁺.

Open image in new window

Graphical Abstract ?

     

A Dansyl-Rhodamine Ratiometric Fluorescent Probe for Hg<Superscript>2+</Superscript> Based on FRET Mechanism

Based on resonance energy transfer (FRET) from dansyl to rhodamine 101, a new fluorescent probe (compound 1) containing rhodamine 101 and a dansyl unit was synthesized for detecting Hg²⁺ through ratiometric sensing in DMSO aqueous solutions. This probe shows a fast, reversible and selective response toward Hg²⁺ in a wide pH range. Hg²⁺ induced ring-opening reactions of the spirolactam rhodamine moiety of 1, leading to the formation of fluorescent derivatives that can serve as the FRET acceptors. Very large stokes shift (220 nm) was observed in this case. About 97-fold increase in fluorescence intensity ratio was observed upon its binding with Hg²⁺.     

Photoluminescence of the nanosized xerogel Zn<Subscript>2</Subscript>SiO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript> in pores of anodic alumina

The photoluminescence properties of a composite material prepared by the introduction of the nanosized phosphor Zn₂SiO₄:Mn²⁺ into porous anodic alumina have been investigated. Scanning electron microscopy studies have revealed that Zn₂SiO₄:Mn²⁺ particles are uniformly distributed in 70% of the volume of the pore channels. The samples exhibit an intense luminescence in the range of 2.3–3.0 eV, which corresponds to the emission of different types of F centers in alumina. After the formation of Zn₂SiO₄:Mn²⁺ nanoparticles in the pores, an intense photoluminescence band is observed at 2.4 eV due to the ⁴T₁–⁶A₁ electronic transition within the 3d shell of the Mn²⁺ activator ion. It has been found that the maximum of the photoluminescence of Zn₂SiO₄:Mn²⁺ xerogel nanoparticles located in the porous matrix is shifted to higher energies, and the luminescence decay time decreases significantly.