In‐situ dispersion of ZrO2 nano‐particles coated with pentacene

Stable suspensions of pentacene functionalised ZrO₂ nano‐particles were synthesised using a microwave plasma process. The particles were dispersed in‐situ in ethylene glycol. The formation of coated particles with small cores and a well defined size in the range of 3–5 nm was shown by X‐ray diffraction. In difference to resublimed pure pentacene, suspensions of the coated nano‐particles remained stable for weeks, as confirmed by the observation of a small aggregate size in dynamic light scattering. Thin films of the particles on Si based substrates were obtained by drop‐casting. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microwave plasma synthesis of nano‐crystalline YSZ

Nanocrystalline yttria‐stabilized zirconia (YSZ) powder and compacts have been successfully synthesized by microwave plasma synthesis co‐evaporating Y and Zr precursors from a single source. Both liquid and solid mixtures of chemically homologous precursors were tested. Electron micrographs and X‐ray diffraction studies reveal small crystallites in the range 3–4 nm with a narrow size distribution. Crystallite sizes smaller than 25 nm are preserved even after subsequent annealing at temperatures up to 950 °C. A comparison with other gas‐phase synthesis routes of nanocrystalline YSZ is given. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth, structure and electrical conduction of WO3 nanorods

We present a very simple method to obtain tungsten trioxide nanorods. The nanorods are epitaxially grown on a mica substrate in low supersaturation conditions. Investigations of morphology, crystallographic structure and chemical composition of the nanorods allow us to propose a growth model in which the potassium ions of the substrate play a major role inducing the one-dimensional structure. The nanorod growth is initiated by the formation of a hexagonal tungsten bronze (HTB) epitaxially oriented on the mica. By using a conductive atomic force microscopy technique, we characterise the electrical conduction of WO₃ networks.     

Synthesis of ZnO compound nanostructures via a chemical route for photovoltaic applications

A facile, low-temperature, and low-cost chemical route has been developed to prepare ZnO nanowire and nanosphere compound structures. The morphology, structure, and composition of the yielded products have been examined by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction measurements. We have systematically investigated the optical properties of the ZnO nanostructures by micro-Raman, photoluminescence, and transmission spectroscopy. The results demonstrate that the yielded ZnO nanostructures possess good optical quality with high light absorption. We have further successfully employed the obtained ZnO compound nanostructures in dye-sensitized solar cells. The light-to-electricity conversion results show that the compound nanostructure exhibits a significant enhancement of short-circuit current density due to the increased surface area and light scattering in the compound nanostructures. The present chemical route provides a simple way to synthesize various compound nanostructures with high surface area for nanodevice applications.     

Photoluminescence investigation of ZnO:P nanoneedle arrays on InP substrate by pulsed laser deposition

Phosphorus-doped ZnO nanoneedle arrays were prepared by phosphorus diffusion from InP substrate using a pulsed laser deposition (PLD) technique. The optical properties of ZnO nanoneedle were investigated by photoluminescence (PL) spectroscopy. Low-temperature photoluminescence spectrum measurements exhibited five acceptor-related emission peaks. The excitation intensity and temperature dependent photoluminescence spectra confirmed that the emission peaks corresponded to neutral-acceptor bound exciton, free electron to acceptor, donor-acceptor pairs, and their first and second photon replicas transitions. Acceptor-binding energy was determined to be 135-167 meV, which agrees well with the best-fitting result of the temperature dependent photoluminescence measurements and is reasonable in terms of theoretic prediction in ZnO.     

Synthesis of single crystal CuAlS2 nanowires via a low temperature direct polyol route

The direct polyol method is used to prepare copper aluminium sulfide CuAlS₂ nanowires. The lattice constants of CuAlS₂ nanowires calculated from powder X-ray diffraction data indicates chalcopyrite structure. The CuAlS₂ nanowires are uniformly in shape and their dimensions are about 50 nm in diameter and several of micrometers in length. The Photoluminescence (PL) spectrum of CuAlS₂ nanowires show a sharp absorption edge at 358.96 nm and a strong near band edge emission at 3.46 eV. The direct energy gap Eg of the sample has been calculated as 3.48 eV, that corresponding to the photoluminescence study. A possible formation mechanism of copper aluminium sulfide is proposed.     

Nonvolatile Memory Characteristics with Embedded High Density Ruthenium Nanocrystals

Ruthenium （Ru） nanocrystals （NCs） embedded in SiO2 gate stacks are formed by rapid thermal annealing for the whole gate stacks and embedded in the memory structure, which is compatible with conventional CMOS technology. The devices exhibit a substantial and clockwise hysteresis in capacitance-voltage measurement. The Ru NCs exhibit high density （2 × 10^12cm^-2）, small size （2-4 nm） and good uniformity both in spatial distribution and morphology. The charging and long-term retention performances are explained by the Coulomb Blockade phenomena and the asymmetric electron tunnel barrier between the Ru NCs and the Si substrate, respectively.     

Temperature induced size selective synthesis of hybrid Cds/pepsin nanocrystals and their photoluminescence investigation

There is growing interest in materials chemistry for taking advantage of the physical and chemical properties of biomolecules in the development of next generation nanoscale materials for opto-electronic applications. A biomimetic approach to materials synthesis offers the possibility of controlling size, shape, crystal structure, orientation, and organization. The great progress has been made in the control that can be exerted over optical materials synthesis using biomolecules (protein, nucleic acid)/mineral interfaces as templates for directed synthesis. We have synthesized the CdS nanocrystals using pepsin by biomimetic technique at four different set temperatures. X-ray diffraction (XRD) and small angle X-ray scattering (SAXS) results showed that we are able to tune the size and distribution profile just by tuning the reaction (Rx) temperature and goes towards excitonic Bhor radius (2.5 nm) at low temperature (4 °C). The narrow absorption peak at 260 nm from Cd²⁺-pepsin complex dominates and indicates the size dispersion of the modified CdS nanoparticles are fairly monodisperse. Effective mass approximation (EMA) shows large blue-shift (~1 eV) in the band gap for the cubic phase from bulk hexagonal CdS. The photoluminescence (PL) and photoluminescence excitation (PLE) spectra are dominated by a strong and narrow band-edge emission tunable in the blue region indicating a narrow size distribution. The reduction in PL efficiency is observed when the Rx temperature increases however no change in PLE spectra and temporal profiles of the band-edge PL is observed. At 4 °C, high emission efficiency with shift of PL spectrum in the violet region is observed for 1.7 nm size CdS quantum dots (QDs). Presence of pepsin has slowed the PL decay which is of the order of 100 μs.     

Optical and ESR studies on Fe doped ZnS nanocrystals

Zn_1 − xFe_xS (x=0.0, 0.1, 0.2, 0.4 and 0.6) nanocrystals have been obtained by chemical co-precipitation from homogeneous solutions of zinc and iron salt compounds, with S²⁻ as precipitating anion formed by decomposition of thiophenol. The TEM micrographs show a spherical shape for ZnS nanocrystals and their average size is around 7 nm. The optical absorption spectra indicate a blue shift of the absorption edge with increasing Fe-content. The luminescence of nanoparticles excite at about 370 nm with an emission peak at around 490 nm. At room temperature, ESR signal characteristic of Fe³⁺ was observed in samples of all concentrations.     

Effects of organic modifiers on the size-controlled synthesis of hydroxyapatite nanorods

Size-controlled synthesis of hydroxyapatite nanorods were carried out by chemical precipitation method using polyethylene glycol (MW 600), Tween 20, trisodium citrate, and d-sorbitol as organic modifiers and starting from calcium nitrate, phosphoric acid, and ammonia solution. The influence of the organic modifiers on the sizes of the resultant HAP nanorods was investigated under different synthesis temperatures. It was found that polyethylene glycol was beneficial to the formation of HAP nanorods with a larger aspect ratio (average length/average diameter) at high synthesis temperature, Tween 20 and trisodium citrate favored the formation of small-sized HAP nanorods, and d-sorbitol helped the formation of HAP nanorods with long length at low synthesis temperatures.     

Optical properties of nanocrystalline-coated Y2O3:Er, Yb obtained by mechano-chemical and combustion synthesis

Y₂O₃:Er³⁺, Yb³⁺ nanocrystals have been obtained by ball milling and using a combustion synthesis procedure. In both cases the nanocrystals have been successfully coated with SiO₂ following the Stöber method. The average size of the as-synthesized nanoparticles has been estimated from X-ray diffraction patterns and transmission electron microscopy images. The dependence of the optical properties of these samples on synthesis procedure or dopant concentration has been investigated. Emission, excitation and lifetime measurements have been carried out. Upconversion luminescence has been detected in all samples and an enhancement of the red to green emission ratio has been observed in all samples after infrared compared to visible excitation. The mechanisms responsible for the upconversion phenomena have been discussed.     

Influence of S incorporation on the luminescence property of ZnO nanowires by electrochemical deposition

Sulfur-doped zinc oxide (ZnO) nanowires have been successfully synthesized by an electric field-assisted electrochemical deposition in porous anodized aluminum oxide template at room temperature. X-ray diffraction and the selected area electron diffraction results show that the as-synthesized nanowires are single crystalline and have a highly preferential orientation. Transmission electron microscopy observations indicate that the nanowires are uniform with an average diameter of 120 nm and length up to several tens of micrometers. Room-temperature photoluminescence is observed in the doped ZnO nanowires, which exhibits a violet emission and blue emissions besides the typical photoluminescence spectrum of a single crystal ZnO.     

High-Density Stacked Ru Nanocrystals for Nonvolatile Memory Application

Stacked ruthenium （Ru） nanocrystals （NCs） are formed by rapid thermal annealing for the whole gate stacks and embedded in memory structure, which is compatible with conventional CMOS technology. Ru NCs with high density （3 × 10^12 cm-2）, small size （2 4nm） and good uniformity both in aerial distribution and morphology are formed. Attributed to the higher surface trap density, a memory window of 5.2 V is obtained with stacked Ru NCs in comparison to that of 3.5 V with single-layer samples. The stacked Ru NCs device also exhibits much better retention performance because of Coulomb blockade and vertical uniformity between stacked Ru NCs.     

Effects of organic acids on the size-controlled synthesis of rutile TiO2 nanorods

Size-controlled synthesis of pure rutile-phase TiO₂ nanorods was carried out by a hydrothermal method using different organic acids as modifiers, and metatitanic acid and concentrated sulfuric acid as raw materials. The synthesized rutile TiO₂ nanorods were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of organic acid modifiers on the sizes of rutile TiO₂ nanorods were investigated. It was found that the steric effect occurred by the organic modifiers and non-polarity of organic acids were beneficial to the formation of small-sized rutile TiO₂ nanorods. The strongly coordinative interaction between the carboxyl (or hydroxyl) group of the modifier and the surface of TiO₂ nanoparticles effectively inhibited the crystal growth.     

Thermoelectric effect in laser annealed printed nanocrystalline silicon layers

Nanocrystalline boron and phosphorus doped silicon particles were produced in a microwave reactor, collected, and dispersed in ethanol. Pulsed laser annealing of spin‐coated films of these particles resulted in p‐ and n‐type conductive layers on flexible substrates if a threshold laser energy density of 60 mJ/cm² was exceeded. The thermopower of the laser sintered layers exhibits a distinct maximum at a doping concen‐ tration around 10¹⁹ cm^–3 for both boron and phosphorus doping with an absolute value of the Seebeck coefficient of about 300 µV/K. Since the thermal conductivity of the layers is reduced by nearly the same factor compared to bulk crystalline silicon as the electrical conductivity, these results are promising for the application of such nanocrystalline layers in thin film thermoelectric devices. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Highly selective growth of vertically aligned double‐walled carbon nanotubes by a controlled heating method and their electric double‐layer capacitor properties

Vertically aligned double‐walled carbon nanotubes (DWCNTs) with the highest selectivity of 90% were synthesized by a controlled heating method and their electric double‐layer capacitor characteristics were evaluated. DWCNT arrays had a specific capacitance of 83 F/g, which is one of the highest values among CNT arrays in a nonaqueous solution and is almost equivalent to that for single‐walled CNT (SWCNT) arrays reported previously. At the same specific capacitance, DWCNTs with superior structural properties are more promising for practical capacitors than SWCNTs. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural characterization of SiGe nanoclusters formed by rapid thermal annealing

This work presents the structural characterization of nanoclusters formed from a-Si:H/Ge heterostructures processed by rapid thermal annealing (RTA) at 1000 °C for annealing times varying between 30 s and 70 s. The a-Si:H layers were grown on electron cyclotron resonance (ECR) using SiH₄ and Ar precursor gases. The Ge layer was grown in an e-beam evaporation system. The structural characterizations were performed by high-resolution X-ray diffractometer (HRXRD) on grazing incidence X-ray reflection mode (GIXRR) and micro-Raman measurements. The average grain size, Ge concentration (x_Ge) and strain were estimated from Lorentzian GIXRR peak fit. The average grain size varied from 3 nm to 7.5 nm and decreased with annealing time. The x_Ge increase with annealing time and varied from 8% to 19%, approximately. The strain calculated for (1 1 1), (2 2 0) and (3 1 1) peaks at 40 s, 50 s, 60 s and 70 s annealing time suggest the geometrical changes in nanoclusters according to process time.     

Synthesis and characterization of nanocrystalline TaN

Tantalum nitride (TaN) nanocrystals have been successfully synthesized at 650 °C through a solid-state reaction in an autoclave. The X-ray powder diffraction pattern indicates that the product is a mixture of hexagonal and metastable cubic TaN. Transmission electron microscopy images and selected area electron diffraction patterns show that the hexagonal TaN crystallites consist of nanorod with a typical size of about 50×1000 nm and the cubic TaN crystallites are composed of uniform particles with an average size of about 30 nm.     

Synthesis and optical properties of CuS nanoplate-based architectures by a solvothermal method

The controlled synthesis of copper sulfide (CuS) nanoplate-based architectures in different solvents has been realized at low cost by simply reaction of Cu(NO₃)₂·3H₂O and S under solvothermal conditions without the use of any template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrometer and fluorescence measurement were used to characterize the products. The products were all in hexagonal phase with high crystallinity and the morphology was significantly influenced by the solvents. The CuS products synthesized in dimethylformamide (DMF) were nanoplates and the samples prepared in ethanol were flower-like morphology composed of large numbers of nanoplates, but those synthesized in ethylene glycol (EG) were CuS architectures with high symmetry made up of several nanoplates arranged in a certain mode. The optical properties were investigated and the growth mechanisms of these CuS crystals were also proposed.     

Synthesis of Ni-doped InTaO4 nanocrystallites by reactive pulsed laser ablation for application to visible-light-operating photocatalysts

Ni-doped InTaO₄ nanocrystallites were synthesized by a reactive pulsed laser ablation process, aiming at visible-light-operating photocatalysts. The third harmonics beam of a Nd:YAG laser was focused onto a sintered In_0.9Ni_0.1TaO_4−δ target in mixture background gases (O₂ + He). The deposited species were columnar-structured porous films consisting of primary nanocrystallites. The mean diameter of the primary nanocrystallites was 4 nm. Optical absorption characteristics, especially in low absorbance (sub-band) regions, were evaluated by photoacoustic spectroscopy. Absorption in the sub-band region decreased drastically with increasing O₂ partial pressures. It is inferred that oxygen deficiencies are suppressed, because of enough oxygen vapors in the reactive background gases. An absorption band around 420 nm appeared obviously in O₂ partial pressures above 5%, in the Ni-doped InTaO₄ nanocrystallites. The visible region absorption band is presumably attributed to the Ni 3d-eg orbitals. In contrast, pure InTaO₄ nanocrystallites showed a sharp band edge, without the visible absorption band.