Surface restructuring process on a Ag/Ge(0 0 1) surface studied by photoelectron spectroscopy

The atomic structure and charge distribution of Ag adsorbed Ge(0 0 1) surfaces have been investigated by means of Ge 3d core- and Ag 4d core-levels photoelectron spectroscopy. A mono-atomic layer of Ag was deposited on the clean Ge(0 0 1) c(4×2) surface at 80 K. The Ge 3d spectrum measured at 80 K was deconvoluted into two surface components, which is consistent with the previously proposed Ag ad-dimer model. After annealing the surface at room temperature, the rearrangement of the charge distribution was revealed to include electron transfer from Ge to Ag in conjunction with the surface restructuring process by the annealing.     

Fe monolayers on InAs(0 0 1): An in situ study of surface, interface and volume magnetic anisotropy

The magnetic anisotropy of epitaxial Fe films with thicknesses in the range of 2-142 monolayers (ML) grown on {4×2} reconstructed InAs(0 0 1) was investigated by in situ ferromagnetic resonance. The easy magnetization direction was found to be parallel to the -direction for Fe films below 4 ML, while it rotates by 45^° toward the -direction. It is observed that both surface-interface and volume contribution to the perpendicular anisotropy favor an easy axis perpendicular to the film plane. The cubic surface-interface anisotropy is relatively large with easy axes along -directions in contrast to the volume contribution which favors easy axes along the -directions. The volume contribution is found to be larger than the Fe bulk cubic anisotropy. A thickness independent uniaxial anisotropy has been found in films with a thickness of 2 up to 142 ML.     

Aluminium adsorption on Ir(1 1 1) at a quarter monolayer coverage: A first-principles study

We present an ab initio density-functional study for aluminium adsorption on Ir(1 1 1) at high symmetry sites, namely, the fcc-, hcp-hollow, top and bridge sites. In each case, we calculate the atomic geometry, average binding energy, work function, and surface dipole moment at the coverage of 0.25 monolayer. We find the favourable structure to be Al at threefold hcp-hollow site, with a corresponding binding energy of 4.46 eV. We present and compare the electronic properties of the two lowest energy structures, i.e., at the threefold hollow sites and discuss the nature of the Al-Ir bond and binding site preference. In particular, we observe a large hybridization of Al-3s, 3p and Ir-5d states near Fermi level, forming an inter-metallic bonds. This results in a significant electron transfer from the Al atoms to the Ir(1 1 1) substrate, inducing an outward pointing surface dipole moment and a large decrease in the work function of 1.69 eV for Al in the hcp-hollow site. Compared to the fcc-hollow site, adsorption in the hcp-hollow site results in a lower density-of-states at the Fermi level, as well as a greater hybridization in the bonding states.     

Co-induced nano-structures on Si(1 1 1) surface

The interaction of cobalt atoms with silicon (1 1 1) surface has been investigated by means of scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED). Besides the Co silicide islands, we have successfully distinguished two inequivalent Co-induced reconstructions on Si(1 1 1) surface. Our high-resolution STM images provide some structural properties of the two different derived phases. Both of the two phases seem to form islands with single domain. The new findings will help us to understand the early stage of Co silicide formations.     

In situ observation of a Au (1 1 1) electrode surface using the X-ray reciprocal-lattice space imaging method

A rapid X-ray diffraction method was proposed for in situ observation of a surface-intermediate structure on a liquid-solid interface. It used a combination of higher-energy monochromatic synchrotron X-rays in grazing incidence and an X-ray two-dimensional detector. Overall patterns were in situ taken, with one-time exposure, of the reciprocal-lattice space of a Au (1 1 1) electrode surface which was fixed at an angular position. We deduced change in crystal domain shapes of surface intermediates as well as its smaller lattice distortion by observing images of reconstructed surface rods during a surface-structural phase transition from the reconstructed surface to the bulk terminated surface. An anisotropic shape of surface-crystal domains was also observed.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

Atomic structure of CaF2/MnF2-Si(1 1 1) superlattices from X-ray diffraction

X-ray reflectivity and non-specular crystal truncation rod scans have been used to determine the three-dimensional atomic structure of the buried CaF₂-Si(1 1 1) interface and ultrathin films of MnF₂ and CaF₂ within a superlattice. We show that ultrathin films of MnF₂, below a critical thickness of approximately four monolayers, are crystalline, pseudomorphic, and adopt the fluorite structure of CaF₂. High temperature deposition of the CaF₂ buffer layer produces a fully reacted, CaF₂-Si(1 1 1) type-B interface. The mature, “long” interface is shown to consist of a partially occupied layer of CaF bonded to the Si substrate, followed by a distorted CaF layer. Our atomistic, semi-kinematical scattering method extends the slab reflectivity method by providing in-plane structural information.     

Measurement of the F5/2 and H(2)9/2 manifold lifetime in Nd:YLiF4

We present direct measurements of the lifetime of the ⁴F_5/2 and ²H(2)_9/2 manifold in Nd³⁺:YLiF₄, using a fluorescence pump-probe technique. The technique populates the ⁴F_5/2 and ²H(2)_9/2 manifold directly with a pump pulse. Via excited state absorption from this excited manifold, the ²F(2)_5/2 manifold of Nd³⁺ is populated with a delayed probe pulse. The population in the ⁴F_5/2 and ²H(2)_9/2 manifold is monitored as a function of time by observing the change in integrated UV fluorescence from the ²F(2)_5/2 manifold for each time delay between pump and probe pulses. The pump and probe beams come from the fundamental and second harmonic wavelengths of a femtosecond Ti:sapphire regenerative amplifier. The measured lifetime agrees well with the energy gap law, based on other nonradiative lifetime measurements from the literature for Nd³⁺:YLiF₄.     

Magnetic ground state and spin waves in A(A = K, Rb or Cs)Fe1.5Se2

We present theoretical results on the ground state phase diagram, spin waves and dynamic structure factor on the J₁-J₂ model. In the reasonable physical parameter region corresponding to AFe_1.5Se₂, the A-collinear antiferromagnetic phase is stable. The spin wave spectra have two acoustic branches and four optical branches for this phase on the rhombus-ordered vacancy lattice, and each of them is twofold degenerate. However, they have one nondegenerate acoustic branch and two nondegenerate optical branches on the square-ordered vacancy lattice. To offer the theoretical guidance for the further experiments, we also discuss the magnetic excitation spectra and the inelastic neutron scattering pattern based on linear spin wave theory.     

Specific heat of EuIn2P2 at high magnetic fields

We have carried out specific heat measurements on EuIn₂P₂ at high magnetic fields perpendicular to the c-axis in the hexagonal crystal structure in order to understand its thermal properties. The temperature dependence of the specific heat exhibits a clear λ-type anomaly due to a magnetic transition at , indicating that the magnetic transition is of second-order. The λ-type anomaly becomes markedly broader with increasing the magnetic field. This remarkable field-dependence is consistent with the results of previous magnetization measurements which suggest that Eu²⁺ magnetic moments align ferromagnetically perpendicular to the c-axis below T_C. In addition, a hump in the specific heat is observed around 7 K, which can be ascribed to the Zeeman splitting of the Eu²⁺ multiplet by internal magnetic fields.     

The static and dynamic properties of PuCoGa5 and NpCoGa5 investigated by neutron scattering experiments

Neutron scattering results on single crystals shed light on the static and dynamic properties of the superconductor () PuCoGa₅ and its isostructural but antiferromagnetic () homologue NpCoGa₅. By polarized neutron diffraction the magnetization density in the paramagnetic state of both compounds has been inferred. The microscopic magnetization of NpCoGa₅ is consistent with the orbital and spin components of a localized Np³⁺ magnetic moment. In the case of PuCoGa₅ the microscopic magnetization is small, temperature-independent and cannot be described as a localized Pu³⁺ magnetic moment. For NpCoGa₅ a dynamic magnetic signal has been observed by three-axis spectroscopy in the antiferromagnetically ordered state. The magnetic signal is strongest at the antiferromagnetic zone center and an energy transfer of about 5 meV. Magnetic fluctuations persist at this position in the paramagnetic state. The dynamic response is similar to the dynamic response observed in other actinide intermetallic compounds. This supports the possibility that magnetic fluctuations could also be present in the paramagnetic superconductor PuCoGa₅.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

High pressure structural studies on SrRuO3

We have performed room temperature high pressure structural studies on the ferromagnetic perovskite SrRuO₃ to 34 GPa. We have also used three different pressure media (silicone fluid, 4:1 methanol:ethanol and argon) to test for possible effects of pressure media on compression data. The orthorhombic perovskite structure is stable to the highest pressure, and the data can be fit with a bulk modulus of with a pressure derivative of for all of the pressure media. We have also examined the high pressure behavior of the RuO₆ octahedra using a model that assumes the octahedra are not distorted. Various tilt angles around the ideal cubic perovskite axes are found and can be used to estimate the Ru-O-Ru bond angle that is known to be directly related to the ferromagnetic Curie temperature. For all pressure media, there appears to be a minimum in the Ru-O-Ru bond angle around 15 GPa. Implications for the observed high pressure magnetic behavior of SrRuO₃ will be discussed.     

Point-contact study of the heavy-fermion superconductor CeCoIn5

We have investigated the differential conductance spectra of the point contacts between the heavy-fermion superconductor CeCoIn₅ and Pt. Many of them show a double-maximum structure that indicates the superconducting energy gap Δ. The Δ values derived using Blonder-Tinkham-Klapwijk model, however, varies from 0.47 to 0.77 meV, and yet they are within the scatter of the reported values. The evolution of Δ below T_c is slow as compared with that of BCS gap probably reflecting the unconventional superconductivity in CeCoIn₅.     

Temperature dependent photoluminescence down to 4.2 K in EuTFC

The temperature dependence of photoluminescence in Europium tris[3-(trifluoro-methylhydroxymethylene)-(+)-camphorate] (EuTFC) embedded in polymer films has been examined from 40 K down to 4.2 K with the goal of preparing sensor films for low-temperature thermal imaging. The behavior of EuTFC showed significant difference when based on polystyrene compared to poly(n-alkyl methacrylate)s. In poly(n-alkyl methacrylate)s prepared by standard methods for imaging applications, the photoluminescence is fully saturated below 30 K, whereas in polystyrene films there is a strong temperature dependence even down to 4.2 K. By optimizing the preparation procedure for films made of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate), also these polymers became very sensitive down to liquid helium temperature. The maximum temperature sensitivity of EuTFC in PBMA is found to be 1.0%/K at 4.2 K. The problem of delamination and cracking of the polymer film at cryogenic temperature is also avoided by the special preparation method.     

Submillimeter measurements of N2 and air broadening of hypochlorous acid

The pressure induced broadening of a several pure rotational transitions of hypochlorous acid, HOCl, have been measured as a function of temperature. This set of rotational transitions is the dominant feature of the submillimeter spectrum in the range where several remote sensing instruments currently operate. Additional features throughout the submillimeter spectrum have been recorded at the full-resolution of the room temperature Doppler linewidth using multiplier chains in the 110- wavelengths.     

Enhanced nonlinear current-voltage behavior in Au nanoparticle dispersed CaCu3Ti4O12 composite films

An enhanced nonlinear current-voltage behavior has been observed in Au nanoparticle dispersed CaCu₃Ti₄O₁₂ composite films. The double Schottky barrier model is used to explain the enhanced nonlinearity in I-V curves. According to the energy-band model and fitting result, the nonlinearity in Au: CCTO film is mainly governed by thermionic emission in the reverse-biased Schottky barrier. This result not only supports the mechanism of double Schottky barrier in CCTO, but also indicates that the nonlinearity of current-voltage behavior could be improved in nanometal composite films, which has great significance for the resistance switching devices.     

Proximity effects in a superconductor/ferromagnet junction

A proximity effect in an s-wave superconductor/ferromagnet (SC/F) junction is theoretically studied using the second order perturbation theory for the tunneling Hamiltonian and Green's function method. We calculate a pair amplitude induced by the proximity effect in a weak ferromagnetic metal (FM) and a half-metal (HM). In the SC/FM junction, it is found that a spin-singlet pair amplitude (Ψ_s) and spin-triplet pair amplitude (Ψ_t) are induced in FM and both amplitudes depend on the frequency in the Matsubara representation. Ψ_s is an even function and Ψ_t is an odd function with respect to the Matsubara frequency (ω_n). In the SC/HM junction, we examine the proximity effects by taking account of magnon excitations in HM. It is found that the triplet-pair correlation is induced in HM. The induced pair amplitude in HM shows a damped oscillation as a function of the position and contains the terms of even and odd functions of ω_n as in the case of the SC/FM junction. We discuss that in our tunneling model the pair amplitude of even function of ω_n only contributes to a Josephson current.     

Anomalies of the phonon properties in multiferroic BiFeO3 thin films near the magnetic phase transition temperature

Size, substrate, doping and magnetic field effects on the phonon properties in multiferroic BiFeO₃ thin films are studied based on a microscopic model. We obtain an anomaly near the magnetic phase transition temperature TN which can be attributed to the magnetoelectric nature of BiFeO₃ and strong anharmonic spin-phonon interaction. It is shown that due to crystal lattice distortion for dopants with ionic radius smaller than that of the host ions the phonon energy decreases (for example Tb or Ti), whereas for the opposite case (larger radius of the doping ions, for example Co or Ni) it increases. The phonon damping is always enhanced compared to the undoped thin film.     

Magnetization and characteristic fields in Nd0.8Ba0.2FeAsO0.6F0.4 with binary doping

In the present work, the iron oxypnictide superconductor of the namely Nd_0.8Ba_0.2FeAsO_0.6F_0.4 is prepared with respect to the observation of distinct magnetization characteristics arising from both electron and hole doping. A magnetothermal phase diagram is given for the present iron oxypnictide system, based on the irreversibility fields (H_irr) and the upper critical fields (H_c2) obtained from magnetotransport measurements, as well as the lower critical fields (H_c1) evaluated by magnetization loops at various temperatures. High H_c2(0) are revealed at low temperature range, which is in consistent with the observations of comparatively high critical current (J_c) and the temperature dependent peak effect in the J_c vs H curves.