Epitaxial growth of uniform NiSi2 layers with atomically flat silicide/Si interface by solid-phase reaction in Ni-P/Si(1 0 0) systems

As metal-oxide-semiconductor field-effect transistor (MOSFET) devices are shrunk to the nanometer scale, flat shallow metal/Si electrical contacts must be formed in the source/drain region. This work demonstrates a method for the formation of epitaxial NiSi₂ layers by a solid-phase reaction in Ni-P(8 nm)/Si(1 0 0) samples. The results show that the sheet resistance remained low when the samples were annealed at temperatures from 400 to 700 °C. P atoms can be regarded as diffusion barriers against the supply of Ni to the Si substrate, which caused the formation of Si-rich silicide (NiSi₂) at low temperature. Furthermore, elemental P formed a stable capping layer with O, Ni and Si during the annealing process. A uniform NiSi₂ layer with an atomically flat interface was formed by annealing at 700 °C because of the formation of a Si-Ni-P-O capping layer and a reduction in the total interface area.     

Effect of erbium interlayer on nickel silicide formation on Si(1 0 0)

To reveal the influence of erbium interlayer on the formation of nickel silicide and its contact properties on Si substrate, Er(0.5-3.0 nm) and Ni(20 nm) are successively deposited onto Si(1 0 0) substrate and are treated by rapid thermal annealing in pure N₂ ambient. The NiSi formation temperature is found to increase depending on the Er interlayer thickness. The formation temperature of NiSi₂ (700 °C) is not influenced by Er addition. But with 2 nm Er interlayer, the formed NiSi₂ is observed textured with preferred orientation of (1 0 0). During the formation of NiSi, Er segregates to the surface and little Er remains at the NiSi/Si(1 0 0) interface. Therefore, the Schottky barrier height of the formed NiSi/n-Si(1 0 0) contact is measured to be 0.635 ∼ 0.665 eV which is nearly invariable with different Er addition.     

Study of Ni/Si(1 0 0) solid-state reaction with Al addition

The characteristics of Ni/Si(1 0 0) solid-state reaction with Al addition (Ni/Al/Si(1 0 0), Ni/Al/Ni/Si(1 0 0) and Al/Ni/Si(1 0 0)) is studied. Ni and Al films were deposited on Si(1 0 0) substrate by ion beam sputtering. The solid-state reaction between metal films and Si was performed by rapid thermal annealing. The sheet resistance of the formed silicide film was measured by four-point probe method. The X-ray diffraction (XRD) was employed to detect the phases in the silicide film. The Auger electron spectroscopy was applied to reveal the element profiles in depth. The influence of Al addition on the Schottky barrier heights of the formed silicide/Si diodes was investigated by current-voltage measurements. The experimental results show that NiSi forms even with the addition of Al, although the formation temperature correspondingly changes. It is revealed that Ni silicidation is accompanied with Al diffusion in Ni film toward the film top surface and Al is the dominant diffusion species in Ni/Al system. However, no Ni_xAl_y phase is detected in the films and no significant Schottky barrier height modulation by the addition of Al is observed.     

Thermal stability of nanoscale silver metallization in Ag/W/Co/Si(1 0 0) multilayer

In this work, we have studied thermal stability of nanoscale Ag metallization and its contact with CoSi₂ in heat-treated Ag(50 nm)/W(10 nm)/Co(10 nm)/Si(1 0 0) multilayer fabricated by sputtering method. To evaluate thermal stability of the systems, heat-treatment was performed from 300 to 900 °C in an N₂ ambient for 30 min. All the samples were analyzed by four-point-probe sheet resistance measurement (R_s), Rutherford backscattering spectrometry (RBS), X-ray diffractometry (XRD), and atomic force microscopy (AFM). Based on our data analysis, no interdiffiusion, phase formation, and R_s variation was observed up to 500 °C in which the Ag layer showed a (1 1 1) preferred crystallographic orientation with a smooth surface and R_s of about 1 Ω/□. At 600 °C, a sharp increase of R_s value was occurred due to initiation of surface agglomeration, WSi₂ formation, and interdiffusion between the layers. Using XRD spectra, CoSi₂ formed at the Co/Si interface preventing W silicide formation at 750 and 800 °C. Meantime, RBS analysis showed that in this temperature range, the W acts as a cap layer, so that we have obtained a W encapsulated Ag/CoSi₂ contact with a smooth surface. At 900 °C, the CoSi₂ layer decomposed and the layers totally mixed. Therefore, we have shown that in Ag/W/Co/Si(1 0 0) multilayer, the Ag nano-layer is thermally stable up to 500 °C, and formation of W-capped Ag/CoSi₂ contact with R_s of 2 Ω/□ has been occurred at 750-800 °C.     

Study of nickel silicide formation on Si(1 1 0) substrate

Nickel silicide formation on Si(1 1 0) and Si(1 0 0) substrate was investigated in this paper. It is confirmed that nickel monosilicide (NiSi) starts to form after 450 °C annealing for Si(1 0 0) substrate, but a higher annealing temperature is required for NiSi formation on Si(1 1 0) substrate, which is demonstrated by X-ray diffraction (XRD) and Raman scattering spectroscopy. The higher formation temperature of NiSi is attributed to the larger Ni₂Si grain size formed on Si(1 1 0) substrate. Ni silicided Schottky contacts on both Si(1 0 0) and Si(1 1 0) substrates were also fabricated for electrical characteristics evaluation. It clearly reveals that the rectifying characteristics of NiSi/n-Si(1 1 0) Schottky contacts is inferior to that of NiSi/n-Si(1 0 0) Schottky contacts, which is attributed to a lower Schottky barrier height and a rougher contact interface. The formation kinetics for nickel silicide on Si(1 1 0) substrate is also discussed in this paper.     

Enhanced formation of periodic arrays of low-resistivity NiSi nanocontacts on (0 0 1)Si0.7Ge0.3 by nanosphere lithography with a thin interposing Si layer

In this study, we demonstrated significant enhancement of the formation of low-resistivity NiSi nanocontacts with controlled size on (0 0 1)Si_0.7Ge_0.3 substrates by combining the nanosphere lithography with the use of a new Ni/a-Si bilayer nanodot structure. Low-resistivity NiSi with an average size of 78 nm was observed to be the only silicide phase formed in samples annealed at 350-800 °C. The presence of the interposing Si layer with appropriate thickness was found to effectively prevent Ge segregation and maintain the interface stability in forming NiSi nanocontacts on (0 0 1)Si_0.7Ge_0.3. As the annealing temperature was increased to 900 °C, amorphous SiO_x nanowires were observed to grow from silicide nanocontact regions. The NSL technique in conjunction with a sacrificial Si interlayer process promises to be applicable in fabricating periodic arrays of other low-resistivity silicide nanocontacts on Si_1−xGe_x substrates without complex lithography.     

Improved electrical and thermal properties of nickel silicides by using a NiCo interlayer

We have investigated the effects of a NiCo interlayer on the electrical and thermal properties of nickel silicide as a function of the annealing temperature. For the interlayered samples, 3 nm-thick NiCo(10 at.% Co) films are electron-beam evaporated on Si substrates, on which 27 nm-thick Ni films are deposited without breaking the vacuum. It is shown that all the samples exhibit a distinctive increase in the sheet resistance at temperatures above 900 ^°C. However, the NiCo interlayer sample produces the lowest sheet resistance at 900 ^\circC. X-ray diffraction results show that the Ni only and NiCo interlayer samples produce NiSi and NiSi₂ phases, while NiCo full samples give NiSi and Ni_1−xCo_xSi₂ phases. Scanning electron microscopy results exhibit that for all the samples, the surfaces become degraded with numerous arbitrarily-shaped spots, corresponding to areas uncovered by the silicides. The areal fractions of the silicides for the Ni only, NiCo full, and NiCo interlayer samples are about 57%, 72%, and 81%, respectively. The temperature dependence of the electrical properties of the silicide samples is explained in terms of the formation of resistive phases and the agglomeration of the silicide.     

Initial stages of iron silicide formation on the Si(1 0 0)2 × 1 surface

The initial stages of iron silicide growth on the Si(1 0 0)2 × 1 surface during solid-phase synthesis were investigated by photoelectron spectroscopy using synchrotron radiation. The experiments were made on iron films of 1-50 monolayer (ML) thickness in the temperature range from room temperature to 750 °С. Our results support the existence of three stages in the Fe deposition on Si(1 0 0) at room temperature, which include formation of the Fe-Si solid solution, Fe₃Si silicide and an iron film. The critical Fe dose necessary for the solid solution to be transformed to the silicide is found to be 5 ML. The solid-phase reaction was found to depend on the deposited metal dose. At 5 ML, the reaction begins at 60 °С, and the solid-phase synthesis leads to the formation of only metastable silicides (FeSi with the CsCl-type structure, γ-FeSi₂ and α-FeSi₂). A specific feature of this process is Si segregation on the silicide films. At a thickness of 15 ML and more, we observed only stable phases, namely, Fe₃Si, ε-FeSi and β-FeSi₂.     

Solid phase epitaxy of Ge films on CaF2/Si(1 1 1)

At room temperature deposited Ge films (thickness < 3 nm) homogeneously wet CaF₂/Si(1 1 1). The films are crystalline but exhibit granular structure. The grain size decreases with increasing film thickness. The quality of the homogeneous films is improved by annealing up to 200 °C. Ge films break up into islands if higher annealing temperatures are used as demonstrated combining spot profile analysis low energy electron diffraction (SPA-LEED) with auger electron spectroscopy (AES). Annealing up to 600 °C reduces the lateral size of the Ge islands while the surface fraction covered by Ge islands is constant. The CaF₂ film is decomposed if higher annealing temperatures are used. This effect is probably due to the formation of GeF_x complexes which desorb at these temperatures.     

Ultrathin ZrO2 films on Si-rich SiC(0 0 0 1)-(3 × 3): Growth and thermal stability

The growth and thermal stability of ultrathin ZrO₂ films on the Si-rich SiC(0 0 0 1)-(3 × 3) surface have been explored using photoelectron spectroscopy (PES) and X-ray absorption spectroscopy (XAS). The films were grown in situ by chemical vapor deposition using the zirconium tetra tert-butoxide (ZTB) precursor. The O 1s XAS results show that growth at 400 °C yields tetragonal ZrO₂. An interface is formed between the ZrO₂ film and the SiC substrate. The interface contains Si in several chemically different states. This gives evidence for an interface that is much more complex than that formed upon oxidation with O₂. Si in a 4+ oxidation state is detected in the near surface region. This shows that intermixing of SiO₂ and ZrO₂ occurs, possibly under the formation of silicate. The alignment of the ZrO₂ and SiC band edges is discussed based on core level and valence PES spectra. Subsequent annealing of a deposited film was performed in order to study the thermal stability of the system. Annealing to 800 °C does not lead to decomposition of the tetragonal ZrO₂ (t-ZrO₂) but changes are observed within the interface region. After annealing to 1000 °C a laterally heterogeneous layer has formed. The decomposition of the film leads to regions with t-ZrO₂ remnants, metallic Zr silicide and Si aggregates.     

A combined in situ AFM and SEM study of the interaction between celestite (0 0 1) surfaces and carbonate-bearing aqueous solutions

In this paper, we present in situ atomic force microscopy (AFM) observations of the interaction between celestite (SrSO₄) (0 0 1) surfaces and Na₂CO₃ aqueous solutions. The observations indicate that the interaction is characterized by a rapid alteration (carbonatation) and dissolution of the original surface, shortly followed by the formation of a new phase. EDX analyses indicate that the new phase is strontianite (SrCO₃). Its crystallization involves the formation and spreading of islands of about 2.75 nm in height, which chiefly occurs on the step edges of the dissolving celestite substrate. The thickness of the islands remains almost constant during their spreading, which occurs mainly parallel to the celestite [0 1 0] direction. As a result of the progressive coalescence of the islands, a fairly homogeneous epitaxial layer forms on the celestite (0 0 1) face. At the initial stages, the formation of islands on the celestite (0 0 1) faces enhances dissolution, indicating the existence of a coupling between dissolution and crystallization reactions. Our measurements on series of AFM images provided quantitative information about coupled dissolution-growth rates on a nanoscale. The effect of the coupled reactions on the celestite (0 0 1) surface on a microscopic scale was also studied by scanning electron microscopy (SEM).     

Structural studies of evaporated CoxCr1−x/Si (1 0 0) and CoxCr1−x/glass thin films

Series of Co_xCr_1−x thin films have been evaporated under vacuum onto Si (1 0 0) and glass substrates. Chemical composition and interface properties have been studied by modelling Rutherford backscattering spectra (RBS) using SIMNRA programme. Thickness ranges from 17 to 220 nm, and x from 0.80 to 0.88. Simulation of the energy spectra shows an interdiffusion profile in the thickest films, but no diffusion is seen in thinner ones. Microscopic characterizations of the films are done with X-ray diffraction (XRD) measurements. All the samples are polycrystalline, with an hcp structure and show a 〈0 0 0 1〉 preferred orientation. Atomic force microscopies (AFM) reveal very smooth film surfaces.     

Silicidation in Ni/Si thin film system investigated by X-ray diffraction and Auger electron spectroscopy

Silicide formation induced by thermal annealing in Ni/Si thin film system has been investigated using glancing incidence X-ray diffraction (GIXRD) and Auger electron spectroscopy (AES). Silicide formation takes place at 870 K with Ni₂Si, NiSi and NiSi₂ phases co-existing with Ni. Complete conversion of intermediate silicide phases to the final NiSi₂ phase takes place at 1170 K. Atomic force microscopy measurements have revealed the coalescence of pillar-like structures to ridge-like structures upon silicidation. A comparison of the experimental results in terms of the evolution of various silicide phases is presented.     

Oxidation of epitaxial Y(0 0 0 1) films

We have investigated the oxidation behavior of MBE grown epitaxial Y(0 0 0 1)/Nb(1 1 0) films on sapphire substrates at elevated temperatures under atmospheric conditions with a combination of experimental methods. At room temperature X-ray diffraction (XRD) reveals the formation of a 25 Å thick YO_xH_x layer at the surface, while simultaneously oxide growth proceeds along defect lines normal to the film plane, resulting in the formation of a single crystalline cubic Y₂O₃ (2 2 2) phase. Furthermore, nuclear resonance analysis (NRA) reveals that hydrogen penetrates into the sample and transforms the entire Y film into the hydride YH₂ phase. Additional annealing in air leads to further oxidation radially out from the already existing oxide channels. Finally material transport during oxidation results in the formation of conically shaped oxide precipitations at the surface above the oxide channels as observed by atomic force microscopy (AFM).     

Fabrication of uniform Au silicide islands on the Si(1 1 1)-(7 × 7) substrate

The Au silicide islands have been fabricated by additional deposition of Au on the prepared surface at 270 °C where the Si islands of magic sizes were formed on the Si(1 1 1)-(7 × 7) dimer-adatom-stacking fault substrate. The surface structure on the Au silicide islands shows the Au/Si(1 1 1)-√3 × √3 reconstructed structure although the substrate remains 7 × 7 DAS structure. The size of the Au silicide islands depends on the size distribution of the preformed Si islands, because the initial size and shape of the Si islands play important roles in the formation of the Au silicide island. We have achieved the fabrication of the Au silicide islands of about the same size (∼5 nm) and the same shape by controlling the initial Si growth and the additional Au growth conditions.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Thermal and irradiation induced interdiffusion in magnetite thin films grown on magnesium oxide (0 0 1) substrates

Epitaxial Fe₃O₄(0 0 1) thin films (with a thickness in the range of 10-20 nm) grown on MgO substrates were characterized using low-energy electron diffraction (LEED), conversion electron Mössbauer spectroscopy (CEMS) and investigated using Rutherford backscattering spectrometry (RBS), channeling (RBS-C) experiments and X-ray reflectometry (XRR). The Mg out-diffusion from the MgO substrate into the film was observed for the directly-deposited Fe₃O₄/MgO(0 0 1) films. For the Fe₃O₄/Fe/MgO(0 0 1) films, the Mg diffusion was prevented by the Fe layer and the surface layer is always a pure Fe₃O₄ layer. Annealing and ion beam mixing induced a very large interface zone having a spinel and/or wustite formula in the Fe₃O₄-on-Fe film system.     

Strain relaxation of epitaxial SiGe layer and Ge diffusion during Ni silicidation on cap-Si/SiGe/Si(0 0 1)

Strain relaxation of the epitaxial SiGe layer and Ge diffusion during nickel silicidation by rapid thermal annealing the structure of Ni(≅14 nm)/cap-Si(≅26 nm)/Si_0.83Ge_0.17/Si(0 0 1) at the elevated annealing temperatures, T_A, were investigated by X-ray diffraction analyses of high-resolution ω-2θ scan and reciprocal space mapping. The analyses showed a much larger strain relaxation at a lower T_A and a reduction in Ge content in the SiGe layer of Ni/SiGe/Si(0 0 1) after thermal annealing compared to the case of cap-Si/SiGe/Si(0 0 1). The results indicate that the strain relaxation of the SiGe layers in NiSi/SiGe/Si(0 0 1) is related to the phenomena of NiSi agglomeration and penetration into the SiGe layer during silicidation at elevated anneal temperatures ≥750 °C. At elevated T_A ≥ 750 °C, Ge diffused into the intact cap-Si area during silicidation.     

Effect of Ni interlayer on stress level of CoSi2 films in Co/Ni/Si(1 0 0) bi-layered system

The effect of Ni interlayer on stress level of cobalt silicides was investigated. The X-ray diffraction patterns (XRD) show that low temperature formation of Co_1−xNi_xSi₂ solid solution was obtained while Ni interlayer was present in Co/Si system, which was confirmed by Auger electron spectrum (AES) and sheet resistance measurement. XRD was also used to measure the internal stress in CoSi₂ films by a 2θ_ψ − sin²ψ method. The result shows that the tensile stress in CoSi₂ films evidently decreased in Co/Ni/Si(1 0 0) system. The reduction of lattice mismatch, due to the presence of Ni in Co_xNi_1−xSi₂ solid solution, is proposed to explain this phenomenon.     

掺Mo对NiSi薄膜热稳定性的改善

报导了在镍薄膜中掺入少量Mo提高了镍硅化物的热稳定性.结果表明，经650— 800℃快速热 退火形成的Ni(Mo)Si硅化物薄膜电阻值较低，约为2．4(Ω／□).XRD分析表明薄膜中只存在 NiSi相，而没有NiSi₂生成.由吉布斯自由能理论分析表明在Ni薄膜中掺人5．9 ％Mo对改善 Ni硅化物热稳定性起到至关重要的作用.经650—800℃快速热退火后的 Ni(Mo)Si／Si肖特基 二极管电学特性良好，势垒高度Φ_B为0．64—0．66eV，理想因子接近于1，更 进一步证明掺少量的Mo能够改善NiSi薄膜的热稳定性. 关键词： 镍硅化物 快速热退火 x射线衍射分析 卢瑟福背散射