Mechanochemically conjugated PMHS/nano-SiO2 hybrid and subsequent optimum grafting density study

In this paper, we reported the preparation of poly(methylhydrosiloxane) (PMHS)/SiO₂ hybrid particles by mechanochemical method based on high energy ball milling (HEBM). The obtained hybrid particles were characterized by Fourier transform infrared (FT-IR) spectroscopy, ²⁹Si CP (cross-polarization) MAS NMR, viscosity measurement, particle size distribution, thermal analysis (TGA, DSC and DTG), static contact angle (CA), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). FT-IR and ²⁹Si CP MAS NMR spectra indicate that PMHS is chemically anchored onto the surface of nano-SiO₂. Viscosity measurement, particle size distribution, FE-SEM and TEM demonstrate that an appropriate grafting density optimizes the dispersion of nanoparticles in poly(dimethylsiloxane) (PDMS) matrix, so lower viscosity can be achieved. Too high or too low grafting density may only achieve suboptimal and poor dispersions. The optimum grafting density of PMHS on nano-SiO₂ was determined by thermal analysis, with approximately 0.0531 PMHS/nm². Static contact angle measurement indicates that the water contact angle of hybrid particles is modulated by changing the grafting density of PMHS on nano-SiO₂. The CA value of PMHS/SiO₂ hybrid with optimum grafting density is 139.4°, and the highest CA value of PMHS/SiO₂ hybrid is approximately 158.2°.     

Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2

A nano-hybrid composite of octadecyl acrylate/maleic anhydride/styrene (OA/MA/St) encapsulating nano-TiO₂ with an average particle size of 30-60 nm was fabricated based on chemical modification of nanotitania. The polymer hybrid OA/MA/St-TiO₂ and nano-TiO₂ were characterized by infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), static contact angle (CA) as well as transmission electron microscopy (TEM). FT-IR spectra and TGA results suggest that the copolymer OA/MA/St adheres on the surface of nano-TiO₂ through physical adsorption and chemical bonding. The calculated reacted OH surface density is about 0.6 OH/nm², and the modification efficiency is approximately 27.28%. In addition, when the molar ratio of OA/MA/St is 7:2:1, the hybrid shows the strongest hydrophobicity, and its static contact angle reaches as high as 146°. TEM image of the hybrid OA/MA/St-TiO₂ reveals that the modified particles have good dispersibility and compatibility with n-hexane.     

Fabrication of diarylide yellow pigments/modified SiO2 core-shell hybrid composite particles for electrophoretic displays

Diarylide yellow pigments/modified SiO₂ core-shell hybrid composite particles were fabricated via a newly developed two-step procedure. The surface of diarylide yellow pigments was coated with SiO₂ by the hydrolysis of Na₂SiO₃. The obtained particles were then modified with in situ generated 3-aminopropylsilanetriol or succinic acid to form composite particles containing amino or carboxyl groups. The FT-IR spectra, TGA and TEM showed that the particles had a core-shell structure, the SEM suggested that the surface morphology of the composite particles was smooth, and the XPS and zeta potential measurement indicated that the composite particles had a high charge load. The obtained composite particles have been applied as electrophoretic particles in the electronic paper, which demonstrated that the newly developed procedure is an effective way to produce various organic/inorganic composite particles used for electrophoretic displays.     

Accurate detection of interface between SiO2 film and Si substrate

Accurate end point detection of interface for multilayers using focused ion beam (FIB) is important in nanofabrication and IC modification. Real-time end point graph shows sample absorbed current as a function of sputtering time during FIB milling process. It is found that sample absorbed current increases linearly with ion beam current for the same material and changes when ion beam is milling through a different material. Investigation by atomic force microscope (AFM) and FIB cross-sectioning shows that accurate SiO₂/Si interface occurs to where the maximum sample absorbed current occurs. Since sample absorbed current can be real-time monitored in focused ion beam machine, the paper provides a viable and simple method for accurately determining the interface during FIB milling process for widely used SiO₂/Si system.     

Comparison of Segregation Behaviors for Special and General Boundaries in Polycrystalline Al2O3 with SiO2-TiO2 Impurities

A systematic study of grain boundaries with an elongated grain morphology in TiO₂-doped polycrystalline Al₂O₃ materials with SiO₂ impurities is reported in this paper. Over 20 grain boundaries, all having common (0001) basal plane surface on one side, were investigated by using HRTEM and analytical TEM. A few of them were basal plane twin boundaries or other non-wetting boundaries, and the majority of grain boundaries were covered by amorphous phases, either as continuous films or with small pockets bounded by surface facets. Si and Ti were segregated to all boundaries, however, two categories of segregation were observed. Excesses of both segregants were between 1.0–4.0 atom/nm² at special and non-wetting boundaries, while they were in the range of 7.0–30 atom/nm² at boundaries with amorphous phases. A variation of amorphous film thickness was also observed, which has a clear relation with Si excess level while Ti excess remained at the same level. This observation suggests that the amorphous phases were primarily made of SiO₂ but Ti segregants were attached to grain surfaces. The variation in thickness of SiO₂-based film is strongly related to the surface structure of anisotropic Al₂O₃ grains.     

Size-Dependent HCl Generation of PVC/SiO2 Micro- and Nanocomposites

In this study HCl generation of polyvinyl (chloride) (PVC)/SiO₂ composites during its combustion was investigated. SiO₂ with different particle sizes were used as HCl absorbers and their HCl uptake ability results were compared to that of CaCO₃. It was found that the amount of released HCl gas during PVC combustion decreased in the presence of SiO₂. The HCl uptake ability of SiO₂ improved with decreasing of its particle size. Although thermogravimetric analysis (TGA) results showed that SiO₂ particles decreased the first thermal degradation temperature (T _onset) of PVC by initiating dehydrochlorination of PVC at lower temperatures, SiO₂ particles had more effective HCl uptaking ability than that of CaCO₃. Scanning electron microscopy (SEM) micrographs showed that some aggregates whose size was less than 100 nm were formed when Si-25 nm was used as filler. When SiO₂ with micron size was added to PVC as filler, more uniform and better distribution of the SiO₂ on the surface was observed.     

Whole-body distribution of <Superscript>14</Superscript>C-labeled silica nanoparticles and submicron particles after intravenous injection into Mice

We analyzed the whole-body distribution of ¹⁴C–ADP-labeled silica nanoparticles (¹⁴C–ADP–SiO₂ nanoparticles) and submicron particles (¹⁴C–ADP–SiO₂ submicron particles) after intravenous injection into ICR mice. The ¹⁴C–ADP–SiO₂ nanoparticles and submicron particles were synthesized before the injection and the particle size was 19.6 and 130 nm, respectively. Similarly, the shape was spherical and the crystallinity was amorphous. After the synthesis, we injected mice with the ¹⁴C–ADP–SiO₂ nanoparticles or the ¹⁴C–ADP–SiO₂ submicron particles and dissected tissues after 1, 2, 4, 8 and 24 h. The radioactivity in the tissues was measured with a liquid scintillation counter. As a result, the retention percentage in bone, skin, lymph nodes, and the digestive mixture was at least twofold higher in the ¹⁴C–ADP–SiO₂ nanoparticles-exposed mice, whereas the retention percentage in the kidney was statistically higher in the ¹⁴C–ADP–SiO₂ submicron particles-exposed mice. Both types of ¹⁴C–ADP–SiO₂ particles mainly translocated to the muscle, bone, skin, and liver, but hardly translocated to the brain and olfactory bulb. Furthermore, the ¹⁴C–ADP–SiO₂ nanoparticles had a higher retention percentage (62.4 %) in the entire body at 24-h post-injection than did the ¹⁴C–ADP–SiO₂ submicron particles (50.7 %). Therefore, we suggested that the ¹⁴C–ADP–SiO₂ nanoparticles might be more likely than the ¹⁴C–ADP–SiO₂ submicron particles to be retained in the body, and consequently they might be gradually accumulated by chronic exposure.     

Au/(SiO2/Si/SiO2)纳米双势垒/n+-Si结构的电致发光研究

利用射频磁控溅射方法,在n⁺-Si衬底上淀积SiO₂/Si/SiO_{2纳米双势垒单势阱结构,其中Si层厚度为2至4nm,间隔为0.2nm,邻近n⁺-S i衬底的SiO2层厚度固定为1.5nm,另一SiO2层厚度固定为3nm.为了 对比研究,还制备了Si层厚度为零的结构,即SiO2(4.5nm)/n⁺-Si 结构.在经过600℃氮气下退火30min,正面蒸上半透明Au膜,背面也蒸Au作欧姆接触后,所 有样品都在反向偏置(n^＋-Si的电压高于Au电极的电压)下发光,而在正向偏压 下不发光.在一定的反向偏置下,电流和电致发光强度都随Si层厚度的增加而同步振荡,位 相相同.所有样品的电致发光谱都可分解为相对高度不等的中心位于2.26eV(550nm)和1.85eV (670nm)两个高斯型发光峰.分析指出该结构电致发光的机制是：反向偏压下的强电场使Au/( SiO2/Si/SiO2)纳米双势垒/n⁺-Si结构发生了雪崩击穿 ,产生大量的电子-空穴对,它们在纳米SiO2层中的发光中心(缺陷或杂质)上复 合而发光. 关键词： 电致发光 纳米双势垒 高斯型发光峰 雪崩击穿}     

Synthesis and characterization of polyurethane/SiO2 nanocomposites

In order to achieve good dispersion of nano-SiO₂ and increase the interactions between nano-SiO₂ and PU matrix, nano-SiO₂ was firstly modified with poly(propylene glycol) phosphate ester (PPG-P) which was a new polymeric surfactant synthesized through the esterification of poly(propylene glycol) (PPG) and polyphosphoric acid (PPA). Then a series of polyurethane (PU)/SiO₂ nanocomposites were prepared via in situ polymerization. The surface modification of nano-SiO₂, the microstructure and the properties of nanocomposites were investigated by FTIR, SEM, XRD and TGA. It was found that good dispersion of nano-SiO₂ achieved in PU/SiO₂ nanocomposite after the modification with PPG-P. The segmented structures of PU were not interfered by the presence of nano-SiO₂ in these nanocomposites.     

Preparation of functional composite grafted particles PDMAEMA/SiO2 and preliminarily study on functionality

Micron-sized silica gel particles were first surface-modified with coupling agent, γ-methacryloylpropyl trimethoxysilane (MPS), and the polymerizable double bonds were introduced onto the surfaces of silica gel particles, forming the modified particles MPS-SiO₂. Subsequently, N,N-dimethylaminoethyl methacrylate (DMAEMA) was graft-polymerized on the surfaces of particles MPS-SiO₂ in the manner of “grafting through”, resulting in the grafted particles PDMAEMA/SiO₂. The grafted particles PDMAEMA/SiO₂ were fully characterized with several means. The graft polymerization process of DMAEMA on particles MPS-SiO₂ was studied in detail, and the optimal reaction conditions were determined. Thereafter, the adsorption properties of the grafted particles PDMAEMA/SiO₂ for chromate anion and Cu²⁺ ion were preliminarily examined respectively. The experimental results indicate that the PDMAEMA grafting degree on PDMAEMA/SiO₂ particles is limited because an enwinding polymer layer as a kinetic barrier on the surfaces of silica gel particles will be formed during the graft polymerization, and blocks the graft polymerization. In order to enhance PDMAEMA grafting degree, reaction time and temperature, and the used amount of initiator as well as the monomer concentration should be effectively controlled. The preliminary adsorption tests show that the grafted particles PDMAEMA/SiO₂ are multi-functional. They possess very strong adsorption ability for CrO₄²⁻ anion by right of strong electrostatic interaction, and have also adsorption action towards heavy metal ion by dint of complexing action.     

Spherical Zn2SiO4:Eu@SiO2 phosphor particles in core-shell structure: Synthesis and characterization

Spherical SiO₂ particles have been coated with Zn₂SiO₄:Eu³⁺ phosphor layers by a Pechini sol-gel process. The microstructure and luminescent properties of the obtained Zn₂SiO₄:Eu³⁺@SiO₂ particles were well characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and lifetime. The results demonstrate that the Zn₂SiO₄:Eu³⁺@SiO₂ particles, which have regular and uniform spherical morphology, emitted an intensive red light emission at 613 nm under excitation at 395 nm. Besides, the effects of the Eu³⁺ concentration, annealing temperature and charge compensators of Li⁺ ions on the PL emission intensities were investigated in detail.     

Adsorption performance and mechanism of 2,4,6-trinitrotoluene on a novel adsorption material polyvinylbenzyl acid/SiO2

Polyvinylbenzene (PVB, namely polystyrene, PSt) was grafted on the surface of silica gel particles by “grafting from” in solution polymerization system, and grafting particles PVB/SiO₂ were obtained. The chloromethylation reaction of the grafted polyvinylbenzene was performed using a novel chloromethylation reagent, 1,4-bis (chloromethyoxy) butane that is un-carcinogenic, and grafting particles CMPVB/SiO₂ were obtained. Subsequently, chloromethyl groups on grafting particles CMPVB/SiO₂ were hydrolyzed and oxidized, and finally adsorption material polyvinylbenzyl acid/SiO₂ (PVBA/SiO₂) was prepared. The adsorption performances and mechanism of 2,4,6-trinitrotoluene (TNT) on PVBA/SiO₂ were investigated through static methods. The experimental results showed that PVBA/SiO₂ possessed strong adsorption ability for TNT with adsorption amount of 26.84 mg g⁻¹. The empirical Freundlich isotherm was also found to agree well with the equilibrium adsorption data. In addition, pH was found to have great influence on the adsorption amount. Finally, PVBA/SiO₂ was observed to possess excellent reusability as well.     

Eu(TTFA)3掺杂SiO2杂化胶体球的合成及特性

采用改进的碱催化法和种子法分别制得了稀土配合物Eu(TTFA)₃掺杂的SiO₂杂化胶体球,并用透射电子显微镜和荧光分光光度计对其显微形貌和荧光光谱特性进行了详细地研究.结果表明,两种方法都可以获得单分散性的、稀土配合物掺杂SiO₂杂化胶体球,且都具有Eu³⁺离子典型的荧光光谱特性.Eu(TTFA)₃掺杂入SiO₂胶体球中后,有机配体TTFA在短波长处的吸收明显增强了,最大的吸收峰位也向短波长方向移动大约20～30 nm,Eu³⁺离子5D0→7F2发射跃迁仍然具有良好的窄线发光特征,同时荧光峰值的形态和位置受SiO₂基体的影响发生轻微的变化.     

Magnetic Core/Shell Nanocomposites MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> for Biomedical Application: Synthesis and Properties

Magnetic core/shell (CS) nanocomposites (MNCs) are synthesized using a simple method, in which a magnesium ferrite nanoparticle (MgFe₂O₄) is a core, and an amorphous silicon dioxide (silica SiO₂) layer is a shell. The composition, morphology, and structure of synthesized particles are studied using X-ray diffraction, field emission electron microscopy, transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), scattering electrophoretic photometer, thermogravimetric analysis (TGA), and Mössbauer spectroscopy. It is found that the MgFe₂O₄/SiO₂ MNC has the core/shell structure formed by the Fe?O–Si chemical bond. After coating with silica, the MgFe₂O₄/SiO₂ MNC saturation magnetization significantly decreases in comparison with MgFe₂O₄ particles without a SiO₂ shell. Spherical particles agglomerated from MgFe₂O₄ nanocrystallites ～9.6 and ～11.5 nm in size function as cores coated with SiO₂ shells ～30 and ～50 nm thick, respectively. The total size of obtained CS MNCs is ～200 and 300 nm, respectively. Synthesized CS MgFe₂O₄/SiO₂ MNCs are very promising for biomedical applications, due to the biological compatibility of silicon dioxide, its sizes, and the fact that the Curie temperature is in the region required for hyperthermal therapy, 320 K.     

Highly resolved scanning tunneling microscopy study of Si(0 0 1) surfaces flattened in aqueous environment

A surface preparation method with fine SiO₂ particles in water is developed to flatten Si(0 0 1) surfaces on the nanometer scale. The flattening performance of Si(0 0 1) surfaces after the surface preparation method is investigated by scanning tunneling microscopy. The observed surface is so flat that 95% of the view area (100 × 100 nm²) is composed of only three atomic layers, namely, one dominant layer occupying 50% of the entire area and two adjacent layers. Furthermore, a magnified image shows the outermost Si atoms regularly distributed along the 〈1 1 0〉 direction on terraces.     

Preparation and characterization of novel Pd/SiO2 and Ca-Pd/SiO2 egg-shell catalysts with porous hollow silica

Novel egg-shell structured monometallic Pd/SiO₂ and bimetallic Ca-Pd/SiO₂ catalysts were prepared by an impregnation method using porous hollow silica (PHS) as the support and PdCl₂ and Ca(NO₃)₂·4H₂O as the precursors. It was found from transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) that Pd was loaded on PHS with a particle size of 5-12 nm in Pd/SiO₂ samples and the Pd particle size in Ca-Pd/SiO₂ was smaller than that in Pd/SiO₂ since Ca could prevent Pd particles from aggregating. X-ray photoelectron spectroscopy (XPS) analyses exhibited that Pd 3d_5/2 binding energies of Pd/SiO₂ and Ca-Pd/SiO₂ were 0.2 and 0.9 eV lower than that of bulk Pd, respectively, as a result of the shift of the electron cloud from Pd to oxygen in Pd/SiO₂ and to both oxygen and Ca in Ca-Pd/SiO₂. The activity of Ca-Pd/SiO₂ egg-shell catalyst for CO hydrogenation and the selectivity to methanol, with a value of 36.50 mmol_CO mol⁻¹_Pd s⁻¹ and 100%, respectively, were much higher than those of the catalysts prepared with traditional silica gel as the support, owing to the porous core-shell structure of the PHS support.     

Virtual effects of Higgs particles

The possibility of observing Higgs particles through virtual effects is considered in detail for a general gauge theory. The effect of charged Higgs particles on low-energy weak interaction processes, like muon decay, tau decay, nuclear beta decay, pion decay, and some higher-order processes is analyzed. The effect of flavor-changing neutral Higgs particles on rare decay modes of the muon and kaon, μe conversion, K^o-$\text{K}$^o and D^o-$\text{D}$^o mixing is also studied. We discuss constraints on possible extensions of the Weinberg-Salam model and experiments sensitive to their Higgs particles. In particular, we analyze the neutral Higgs which couple to fermions in the minimal SU(2)_L×SU(2)_R×U(1) model and find that they probably have mass greater than 100 GeV.     

Preparation of α-Fe2O3 nanoparticles by high-energy ball milling

α-Fe₂O₃ nanoparticles were prepared by high-energy ball milling using α-FeOOH as raw materials. The prepared samples were characterized by transmission electron microscopy (TEM), Mössbauer spectroscopy, X-ray diffraction (XRD) and differential thermal analysis–thermogravimetric analysis (DTA–TGA). The results showed that after 90 h milling α-Fe₂O₃ nanoparticles were obtained, and the particle size is about 20 nm. The mechanism of reaction during milling is supposed that the initial α-FeOOH powder turned smaller and smaller by the high-speed collision during ball milling, later these particles turned to be superparamagnetic, at last these superparamagnetic α-FeOOH particles were dehydrated and transformed into α-Fe₂O₃.     

Passively mode-locked Nd:YVO4 laser using semiconductor saturable absorption mirrors of interface states relaxation region

Semiconductor saturable absorber mirrors (SESAMs) with GaAs/air interface relaxation region have less non-saturable loss than those with low temperature grown In_0.25Ga_0.75As relaxation region. A thin layer of SiO₂ and a high reflectivity film of Si/(SiO₂/Si)₄ were coated on the SESAMs, respectively in order to improve the SESAM's threshold for damage. The passively continuous wave mode-locked lasers with two such SESAMs were demonstrated, and the SESAM with high reflectivity film of Si/(SiO₂/Si)₄ is proved to be helpful for high output power.     

An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents

Regenerable antimicrobial N-halamine/silica hybrid nanoparticles (NPs) containing chlorinated 5,5-dimethylhydantoinyl (Cl-DMH) groups, Cl-DMH/SiO₂ hybrid NPs, have been prepared by a co-condensation reaction between N-(3-triethoxysilylpropyl)-5,5-dimethylhydantoin (TS-DMH) and tetraethoxysilane (TEOS) and then a chlorination reaction in NaClO solution. The as-synthesized Cl-DMH/SiO₂ NPs were characterized by transmission electron microscopy, Scanning electron microscopy, X-ray photoelectron spectra, Specific surface area, Differential scanning calorimetry, and Fourier transform infrared. Experimental results showed that the size of the as-synthesized Cl-DMH/SiO₂ NPs could be well adjusted by changing the mass ratio of TS-DMH/TEOS and the volume ratio of 28 % NH₄OH/H₂O. Antimicrobial tests showed that the as-prepared Cl-DMH/SiO₂ hybrid NPs had excellent antimicrobial activities against both Escherichia coli and Staphylococcus aureus. The minimum inhibitory concentration and minimum bactericidal concentration values of the as-prepared Cl-DMH/SiO₂ hybrid NPs are 15 and 20 μg/mL for S. aureus, 25 and 30 μg/mL for E. coli, respectively. Paper disk diffusion assay showed that smaller-sized Cl-DMH/SiO₂ hybrid NPs have bigger inhibition zone diameters, indicating stronger antimicrobial efficacies. Also, the storage stability and regenerability of Cl-DMH/SiO₂ hybrid NPs were investigated.