Effect of deposition voltage on the field emission properties of electrodeposited diamond-like carbon films

Diamond-like carbon (DLC) films were deposited on Al substrates by electrodeposition technique under various voltages. The surface morphology and compositions of synthesized films were characterized by scanning electron microscopy and Raman spectroscopy. With the increase of deposition voltage, the sp² phase concentration decreased and the surface morphology changed dramatically. The influence of deposition voltage on the field electron emission (FEE) properties of DLC films was not monotonic due to two adverse effects of deposition voltage on the surface morphology and compositions. The DLC film deposited under 1200 V exhibited optimum FEE property, including a lowest threshold field of 13 V/μm and a largest emission current density of 904.8 μA/cm² at 23.5 V/μm.     

�ڱ������������ʯ��Ĥ���������ױ���

在工作气体采用氩气和甲烷混合气体(4:1)的直流辉光放电中,在工作气压分别为10、20、30和40Pa以及沉积时间分别为10、20和30min下利用等离子体化学气相沉积法在内径10mm长100mm的304不锈钢管内表面制备了类金刚石薄膜,并利用喇曼光谱研究了沉积的工作气压和时间对薄膜微观结构的影响。通过对喇曼谱图进行定量解析发现：随着压强的增加,D峰、G峰位置、两峰峰宽以及其强度比值ID/IG都呈先减小后增大趋势,20Pa时达到最低点;随着沉积时间的增加,D峰、G峰位置向低波数端减小,半峰宽减小;D峰、G峰的强度比ID/IG减小。定量解析的结果表明,随沉积时间的增加,DLC薄膜中的sp3含量会增多,结构会相对更有序,薄膜中石墨团簇的尺寸会更大。     

含氮类金刚石薄膜的紫外辐照研究

 用射频等离子体方法在玻璃基底上制备的类金刚石（DLC）薄膜，采用离子注入法掺氮，并对掺氮DLC薄膜紫外（UV）辐照前后的性能变化进行了研究。研究结果表明：随氮离子注入剂量及UV辐照时间的增加，位于2 930cm^-1附近的SP ³C-H吸收峰明显变小，而位于1 580cm^-1附近的SP2C-H吸收峰则明显增强，薄膜的电阻率明显呈下降趋势；随UV辐照时间的增加，位于1 078cm^-1附近的Si-O-Si键数量及位于786cm^-1附近的Si-C键数量明显增加。即氮离子注入和UV辐照明显改变了DLC薄膜的结构与特性。     

椭偏光散射分析类金刚石薄膜的散射特性

 基于光学薄膜反射椭偏法的测量原理,对光学薄膜散射椭偏特性进行了研究。给出了光学薄膜散射逆问题的解决方法,并对不同脉冲频率下采用脉冲真空电弧离子镀技术沉积的类金刚石薄膜的散射特性进行了研究。分析了光学薄膜界面的相关特性以及膜层中局部缺陷对散射光椭偏特性的影响。结果表明:随着脉冲频率的增加,所沉积的类金刚石薄膜的相关性变差,且薄膜中的局部缺陷引起的体散射越明显。     

等离子体增强化学气相沉积法制备含氢类金刚石膜的紫外Raman光谱和X射线光电子能谱研究

利用脉冲辉光放电的方法,在硅片上采用不同的沉积工艺制备了含氢类金刚石膜层,并采用Raman光谱和X射线光电子能谱(XPS)对膜层进行表征.用Raman光谱仪在波长为325 nm的紫外光源的激励下观察膜层的键结构.紫外Raman光谱对含氢类金刚石膜是非常有用的,它能有效避免可见光Raman光谱测量时的荧光干扰,清晰地得到膜层的D峰和G峰.同时利用XPS分析得到膜层的sp3键含量,并与Raman光谱所得数据进行比较.通过Raman光谱和XPS分析可以发现,在紫外光源的激励下,膜层的G峰峰位向高频移方向移动,G峰峰位、I(D)/I(G),G峰半高宽和sp3键含量之间存在一定的关系.     

Wettability and antibacterial activity of modified diamond-like carbon films

Diamond-like carbon (DLC) films can be used in a numerous industrial applications, including biomedical coatings with bactericidal properties. It has been demonstrated that DLC surface can be modified with oxygen plasma treatment. The purpose of this paper is to study the wettability and bactericidal activity of oxygen plasma-treated DLC films produced by plasma enhanced chemical vapor deposition technique. The sp³/sp² ratio increased after the treatment due to the increase in the generation of the unstable carbon bonds caused by the energetic ions, especially O-H group. The treated DLC surface becomes superhydrophilic and rougher, although the roughness values are still lower. DLC antibacterial activity did not increased with plasma treatment. Therefore, oxygen plasma treatment can be used to make superhydrophilic DLC but not to increase its bactericidal properties.     

Nanoindentation measurements on modified diamond-like carbon thin films

In the present study, we explored the effect of metallic interlayers (Cu and Ti) and indentation loads (5-20 mN) on the mechanical properties of plasma produced diamond-like carbon (DLC) thin films. Also a comparison has been made for mechanical properties of these films with pure DLC and nitrogen incorporated DLC films. Introduction of N in DLC led to a drastic decrease in residual stress (S) from 1.8 to 0.7 GPa, but with expenses of hardness (H) and other mechanical properties. In contrast, addition of Cu and Ti interlayers between substrate Si and DLC, results in significant decrease in S with little enhancement of hardness and other mechanical properties. Among various DLC films, maximum hardness 30.8 GPa is observed in Ti-DLC film. Besides hardness and elastic modulus, various other mechanical parameters have also been estimated using load versus displacement curves.     

氟化类金刚石薄膜的拉曼和红外光谱结构研究

关键词：     

Diamond-like carbon films deposited by a hybrid ECRCVD system

A novel hybrid technique for diamond-like carbon (DLC) film deposition has been developed. This technique combines the electron cyclotron resonance chemical vapor deposition (ECRCVD) of C₂H₂ and metallic magnetron sputtering. Here we described how DLC film is used for a variety of applications such as stamper, PCB micro-tools, and threading form-tools by taking advantage of hybrid ECRCVD system. The structure of the DLC films is delineated by a function of bias voltages by Raman spectroscopy. This function includes parameters such as dependence of G peak positions and the intensity ratio (I_D/I_G). Atomic force microscope (AFM) examines the root-mean-square (R.M.S.) roughness and the surface morphology. Excellent adhesion and lower friction coefficients of a DLC film were also assessed.     

Local structure of hydroxy-peroxy apatite: A combined XRD, FT-IR, Raman, SEM, and solid-state NMR study

The synthesized hydroxyapatite (HAp) and hydroxy-peroxy apatite are studied using various techniques, such as X-ray powder diffraction, FT-IR and Raman spectroscopy, scanning electron microscopy, and solid-state NMR spectroscopy. The experimental data suggest that hydroxy-peroxy apatite contains a small amount of hydration of partially dehydroxylated hydroxyapatite phase and calcium hydroxide. The incorporation of peroxide ions into the lattice of HAp causes perturbations of the hydrogen environments and slight changes in its crystal morphology. The distance between H in some structural OH⁻ and adjacent O along the c-axis becomes longer instead of forming a hydrogen bond after the incorporation of peroxide ions.     

Characterization of archeological glasses by micro‐Raman spectroscopy

The method based on the deconvolution of the Raman spectra of glasses, proposed for the investigation of glazed ceramics by Colomban, is applied to archeological samples of glass of two different origins in an attempt to characterize the glass composition and the fictive temperature using a contactless, nondestructive spectroscopic technique. The samples investigated are glassy mosaic tesserae of Roman times from Massa Lubrense, Napoli, Italy, and medieval rosary grains found during the excavations in the church of San Martino di Rivosecco, Parma, Italy. The polymerization index, obtained as the ratio of the bending and stretching band amplitudes, suggests firing temperatures not less than 1000–1100 °C for both Roman and medieval glasses. From the wavenumber shift of some stretching bands at about 1050–1100 cm⁻¹, the content of lead was estimated. The medieval samples show a lower Pb content, a result confirmed by elementary energy dispersive X‐ray spectral data. Copyright © 2010 John Wiley & Sons, Ltd.     

Target-plane deposition of diamond-like carbon in pulsed laser ablation of graphite

In pulsed Nd:YAG laser ablation of highly oriented pyrolytic graphite (HOPG) at 10⁻⁶ Torr, diamond-like carbon (DLC) are deposited at laser wavelengths of 1064, 532, and 355 nm on substrates placed in the target-plane. These target-plane samples are found to contain varying sp³ content and composed of nanostructures of 40-200 nm in size depending on the laser wavelength and laser fluence. The material and origin of sp³ in the target-plane samples is closely correlated to that in the laser-modified HOPG surface layer, and hardly from the backward deposition of ablated carbon plume. The surface morphology of the target-plane samples shows the columnar growth and with a tendency for agglomeration between nanograins, in particular for long laser wavelength at 1064 nm. It is also proposed that DLC formation mechanism at the laser-ablated HOPG is possibly via the laser-induced subsurface melting and resolidification.     

Understanding the friction behavior of sulfur-terminated diamond-like carbon films under high vacuum by first-principles calculations

Generally, the repulsive force was a key factor account for superlow friction of H or F doped diamond-like carbon (DLC) films under high vacuum. As we known, H or F doped DLC usually exhibited superlow friction under high vacuum. However, the superlow friction of S doped DLC under high vacuum was not found so far. This phenomenon was desirable to be well investigated. In this work, S-terminated diamond interfaces also exhibited strong repulsive force, however, the estimated friction coefficient was variable for S-terminated diamond interfaces. The lowest and largest friction coefficient was about 0.003 and 0.4 respectively, which indicated that the superlow friction of S doped DLC could achieve in theory. In order to well probe the unusual friction behavior of S doped DLC under high vacuum, using first-principles method, the repulsive interaction between sliding surfaces was well investigated in order to understand the unusual friction behavior of S doped DLC films.     

Influences of ultraviolet irradiation on structure and tribological properties of diamond-like carbon films

Two types of diamond-like carbon (DLC) films with different bonding configurations were produced by pulse-assisted and DC-assisted plasma chemical vapor deposition. The chemical composition, surface morphology, microstructure, internal stress and tribological properties of the two films before and after the ultraviolet (UV) irradiation were investigated and compared. It was found that the UV irradiation had little effects on the chemical composition and surface morphology of both the films, but greatly influenced their tribological properties in the opposite trends. This result was attributed to the different changing outcomes of the bonding configuration induced by the UV actions of primary photo-dissociation and secondary recombination, wherein the inherent bonding configuration and internal stress played important roles.     

Characterization of uranium tetrafluoride (UF4) with Raman spectroscopy

The Raman spectrum of uranium tetrafluoride (UF₄) is unambiguously characterized with multiple Raman excitation laser sources for the first time. Across different laser excitation wavelengths, UF₄ demonstrates 16 distinct Raman bands within the 50–400 cm⁻¹ region. The observed Raman bands are representative of various F–F vibrational modes. UF₄ also shows intense fluorescent bands in the 325–750 nm spectral region. Comparison of the UF₄ spectrum with the ZrF₄ spectrum, its crystalline analog, demonstrates a similar Raman band structure consistent with group theory predictions for expected Raman bands. Additionally, a demonstration of combined scanning electron microscopy and in situ Raman spectroscopy microanalytical measurements of UF₄ particulates shows that despite the inherent weak intensity of Raman bands, identification and characterization are possible for micron‐sized particulates with modern instrumentation. The published well‐characterized UF₄ spectrum is extremely relevant to nuclear materials and nuclear safeguard applications. Published 2016. This article is a U.S. Government work and is in the public domain in the USA. Journal of Raman Spectroscopy published by John Wiley & Sons Ltd.     

Synthesis of nitrogen-doped single-walled carbon nanotubes and monitoring of doping by Raman spectroscopy

Nitrogen-doped single-walled carbon nanotubes （CNx-SWNTs） with tunable dopant concentrations were synthesized by chemical vapor deposition （CVD）, and their structure and elemental composition were characterized by using transmission electron microscopy （TEM） in combination with electron energy loss spectroscopy （EELS）. By comparing the Raman spectra of pristine and doped nanotubes, we observed the doping-induced Raman G band phonon stiffening and 2D band phonon softening, both of which reflect doping-induced renormalization of the electron and phonon energies in the nan- otubes and behave as expected in accord with the n-type doping effect. On the basis of first principles calculations of the distribution of delocalized carrier density in both the pristine and doped nanotubes, we show how the n-type doping occurs when nitrogen heteroatoms are substitutionally incorporated into the honeycomb tube-shell carbon lattice.     

Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings

In this paper, we report a facile two-step approach to immobilize proteins onto DLC surfaces. The first step was a simple immersion of DLC in a solution of dopamine. Polydopamine was deposited on DLC as a stable anchor to present protein molecules. Then the protein ad-layer was deposited on it. The chemical components of the modified DLC surfaces were characterized by Fourier transform infrared spectra and X-ray photoelectron spectroscopy. The biocompatibility of it was evaluated in vitro by the tetrazolium salt method. And it was indicated that the BSA modified surface had good haemocompatibility properties, and was cytocompatible to PC-12 cells.     

高煤级煤石墨化轨迹阶段性的XRD和Raman光谱表征

为了研究石墨化过程中煤的分子结构有序化轨迹,选取湖南、陕西19个不同变形-变质程度高煤级煤为研究对象,采用工业分析、元素分析、X射线衍射分析(XRD)和拉曼光谱分析(Raman)等手段,结合分峰拟合的数学方法,对系列样品分子结构参数(XRD结构参数,如石墨化度、延展度La、堆砌度Lc及面网间距d002等;Raman参数...     

Gas barrier properties of diamond-like carbon films coated on PTFE

Diamond-like carbon (DLC) films were deposited on polytetrafluoroethylene (PTFE) using radio frequency (RF) plasma-enhanced chemical vapour deposition (PE-CVD). Before the DLC coating, the PTFE substrate was modified with a N₂ plasma pre-treatment to enhance the adhesive strength of the DLC to the substrate. The influences of the N₂ plasma pre-treatment and process pressure on the gas permeation properties of these DLC-coated PTFE samples were investigated. In the Raman spectra, the G peak position shifted to a lower wave number with increasing process pressure. With scanning electron microscopy (SEM), a network of microcracks was observed on the surface of the DLC film without N₂ plasma pre-treatment. The density of these cracks decreased with increasing process pressure. In the film subjected to a N₂ plasma pre-treatment, no cracks were observed at any process pressure. In the gas barrier test, the gas permeation decreased drastically with increasing film thickness and saturated at a thickness of 0.2 μm. The DLC-coated PTFE with the N₂ plasma pre-treatment exhibited a greater reduction in gas permeation than did the samples without pre-treatment. For both sample types, gas permeation decreased with increasing process pressure.     

Probing structural stability of double-walled carbon nanotubes at high non-hydrostatic pressure by Raman spectroscopy

Theoretical calculations predict that the collapse pressure for double-walled carbon nanotubes (DWCNTs) is proportional to 1/R ³, where R is the effective or average radius of a DWCNT. In order to address the problem of CNT stability at high pressure and stress, we performed a resonance Raman study of DWCNTs dispersed in sodium cholate using 532 and 633 nm laser excitation. Raman spectra of the recovered samples show minor versus irreversible changes with increasing I _D/I _G ratio after exposure to high non-hydrostatic pressure of 23 and 35 GPa, respectively. The system exhibits nearly 70% pressure hysteresis in radial breathing vibrational mode signals recovery on pressure release which is twice that predicted by theory.