Generalized stacking fault energy in FCC metals with MEAM

The second nearest-neighbor modified embedded atom method (2NN-MEAM) is used to investigate the generalized stacking fault (GSF) energy surfaces of eight FCC metals Cu, Ag, Au, Ni, Pd, Pt, Al and Pb. An offset is observed in all the metals for the displacement δ_us of unstable stacking fault energy from the geometrically symmetric displacement point . The offset value is the greatest for Al and the smallest for Ag. By analyzing the stable stacking fault energy γ_sf and unstable stacking fault energy γ_usf, it can be predicted that stacking fault is more favorable in Cu, Ag, Au, and especially in Pd than the other metals, while it is most preferred to create partial dislocation for Ag and to create full dislocation for Al.     

Generalized-stacking-fault energy and surface properties for HCP metals: A first-principles study

We present first-principles calculations on the generalized-stacking-fault (GSF) energies and surface properties for several HCP metals on Mg, Be, Ti, Zn, and Zr, employing density functional theory (DFT) within generalized-gradient-approximation (GGA) and spin-polarized GGA (SGGA) using the Vienna ab initio simulation package (VASP). Using a supercell approach, stacking fault energies for the [1 1  0] and [1 0  0] slip systems, and surface properties on basal plane (0 0 0 1) have been determined. Our results show that GSF energy is sensitive to the primitive cell volumes and the ratio c/a for HCP metals. A spin-polarized calculations should be considered for transition-metal Ti, Zn, and Zr. The results for Mg from this work are good with ones from the previous ab initio and the experiments.     

CH4 dissociation on Ni surfaces: Density functional theory study

CH₄ dissociation on Ni surfaces, which is important in CH₄ reforming reactions, was discussed by using density functional theory. It was found that the CH_x species were changed to anions after chemisorption. The site preference of CH_x (x = 0-3) species on Ni(1 1 1), Ni(1 0 0) and Ni(1 1 0) was located on the basis of the computed chemisorption energies. Ni(1 0 0) is the most preferred surface for CH₄ dissociation, compared to Ni(1 1 0) and the widely investigated Ni(1 1 1).     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Theoretical study of CO and Pb adsorption on the Ni(1 1 1) and Ni3Al(1 1 1) surfaces

Adsorption of CO molecules and Pb atoms on the Ni(1 1 1) and Ni₃Al(1 1 1) substrates is studied theoretically within an ab initio density-functional-theory approach. Stable adsorption sites and the corresponding adsorption energies are first determined for stoichiometric surfaces. The three-fold hollow sites (fcc for Pb and hcp for CO) are found most favourable on both substrates. Next, the effect of surface alloying by a substitution of selected topmost substrate atoms by Pb or Ni atoms on the adsorption characteristics is investigated. When the surface Al atoms of the Ni₃Al(1 1 1) substrate are replaced by Ni atoms, the Pb and CO adsorption energies approach those for a pure Ni(1 1 1) substrate. The Pb alloying has a more substantial effect. On the Ni₃Al(1 1 1) substrate, it reduces considerably adsorption energy of CO. On the Ni(1 1 1) substrate, CO binding strengthens slightly upon the formation of the Ni(1 1 1)p(2×2)-Pb surface alloy, whereas it weakens drastically when the Ni(1 1 1)-Pb surface alloy is formed.     

Surface defect states of CdTexS1 − x quantum dots

Properties of surface defect states of CdTe_xS_1 − x quantum dots with an average diameter of 7 nm are investigated experimentally. The stoichiometric ratio is found to be for by use of the energy dispersive analysis of x-ray. The photoluminescence spectrum, the photoluminescence excitation spectrum, and the surface passivation are adopted to characterize the properties of surface defect states. The energy levels of surface defect states of CdTe_xS_1 − x quantum dots are also determined.     

Experimental and theoretical studies on X-ray induced secondary electron yields in Ti and TiO2

Generation of X-ray induced secondary electrons in Ti and TiO₂ was studied from both experimental and theoretical approaches, using X-ray photoelectron spectroscopy (XPS) attached to a synchrotron radiation facility and Monte Carlo simulation, respectively.The experiment revealed that the yields of secondary electrons induced by X-rays (electrons/photon) at photon energies to 4950 and 5000 eV for Ti and TiO₂ are δ_Ti(4950 eV) = 0.002 and δ_Ti(5000 eV) = 0.014 while those for TiO₂ are δTiO₂(4950 eV)=0.003 and δTiO₂(5000 eV)=0.018.A novel approach to obtain the escape depth of secondary electrons has been proposed and applied to Ti and TiO₂. The approach agreed very well with the experimental data reported so far. The Monte Carlo simulation predicted; and while and .An experimental examination on the contribution of X-ray induced secondary electrons to photocatalysis in TiO₂ has also been proposed.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

Young's modulus surface and Poisson's ratio curve for cubic metals

The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l, θ) along arbitrary loading direction [h k l] are given for cubic crystals. The representation surface for which the length of the radius vector in the [h k l] direction equals to E(h k l) and representation curve for which the length of the radius vector with angle θ deviated from the reference directions , and equals to υ(100, θ), υ(110, θ) and υ(111, θ) for example, are constructed for six FCC metals Ag, Al, Au, Cu, Ni, Pb and seven BCC metals Cr, Fe, Mo, Nb, Ta, V, W.     

Ultra-thin films and surface alloying of Pd on Cu(1 1 1) investigated by medium energy ion scattering

The structure of Pd films on Cu(1 1 1) and the alloying between the films and the substrate have been investigated by medium energy ion scattering (MEIS) using 100 keV H⁺ ions. Data are presented for the and alignments (nominal one- and three-layer alignments, respectively). It is found that beyond 1 ML the Pd grows in a twinned fcc structure, the incommensurate nature of which increases the visibility of the Cu(1 1 1) substrate to MEIS. Deposition of 0.2 ML of Pd produces a structure in which Pd mostly occupies the top two layers which have interlayer distances d₁₂ = 208 ± 4 pm and d₂₃ = 211 ± 4 pm. Some twinning is also present in this structure. Upon annealing 1.6 ML of Pd to 600 K for 1 min, the copper and palladium interdiffuse leaving around 0.4 ML of visible palladium. Energy plots show that there are several layers with an altered structure present over at least part of the surface. This may be due to large scale interdiffusion or alloy island formation. Incremental annealing to successively higher temperatures shows that the structural transformation begins around 500 K.     

Interference of resonance luminescence of exciton polaritons in CuGaS2 crystals

The nonmodulated and wavelength-modulated reflection spectra of CuGaS₂ crystals for the polarization EIIc of 10 K are studied. The states n = 1, 2 and 3 of the excitons Γ₄ (A-excitons) and n = 1, n = 2 of B- and C-excitons are found. The nonmodulated absorption spectra for the polarization E⊥c at 10 K have been studied. The states n = 1, 2 and 3 of Γ₅ excitons are found. The main parameters of the A (Γ₄, Γ₅) and B, C exciton series at the energies of the longitudinal and transverse excitons Γ₄ for the states n = 1 and n = 2, the effective masses of electrons and holes are determined. The photoluminescence peaks were observed at n = 3 and n = 4 of the excitons Γ₅ in the luminescence spectra excited by the line 4880 Å of Ar⁺ laser. In the luminescence spectra the interference is found.     

Production of Sr-deficient bismuth tantalates from microwave-hydrothermal derived precursors: Structural and dielectric properties

Strontium bismuth tantalates were produced for the first time from microwave-hydrothermal precursors at , for 2 h. Structural and dielectric properties were investigated by X-ray diffraction and complex impedance spectroscopy. A high ferroelectric-paraelectric transition temperature of was observed, together with two different dielectric regimes for the ac electrical conductivity below T_c. The activation energies were calculated as 0.155 and 0.531 eV, and are related to conduction by oxygen vacancies. It was concluded that the low activation energies showed by these materials could contribute to their fatigue-free nature.     

Microstructure of epitaxial scandium nitride films grown on silicon

Epitaxial scandium nitride films (225 nm thick) were grown on (1 1 1)-oriented silicon substrates by molecular beam epitaxy (MBE), using ammonia as a reactive nitrogen source. Film microstructure was investigated using X-ray diffraction (XRD). The (1 1 1) ω-scan FWHM of 0.551° obtained for films grown at 850 °C is the lowest reported so far for ScN thin films. The principal orientation of ScN with respect to Si is (1 1 1)_ScN//(1 1 1)_Si and []_ScN//[]_Si, representing a 60° in-plane rotation of the ScN layer with respect to the Si substrate. However, some twinning is also present in the films; the orientation of the twinned component is (1 1 1)_ScN//(1 1 1)_Si and []_ScN//[]_Si, representing a ‘cube-on-cube’ orientation. The volume percentage of these twins in the films decreases with increasing film growth temperature.     

Temperature and pressure effects on the spin state of ferric ions in the [Fe(sal2-trien)][Ni(dmit)2] spin crossover complex

Thermal and pressure effects have been investigated on the [Fe(sal₂-trien)][Ni(dmit)₂] spin crossover complex by means of Mössbauer spectroscopic, calorimetric, X-ray diffraction and magnetic susceptibility measurements. The complex displays a complete thermal spin transition between the and spin states of Fe^III near 245 K with a hysteresis loop of ca. 30 K. This transition is characterised by a change of the enthalpy, ΔH_HL=7 kJ/mol, entropy, ΔS_HL=29 J/Kmol, and the unit cell volume, ΔV_HL=15.4 Å³. Under hydrostatic pressures up to 5.7 kbar the thermal transition shifts to higher temperatures by ca. 16 K/kbar. Interestingly, at a low applied pressure of 500 bar the hysteresis loop becomes wider (ca. 61 K) and the transition is blocked at ∼50% upon cooling, indicating a possible (irreversible) structural phase transition under pressure.     

The CΠu state of Na2 revisited: A comprehensive study by polarization labeling spectroscopy technique

This paper contains the analysis of the C(2)¹Π_u state of Na₂ molecule based on a large data set (3030 lines) obtained from a polarization labeling spectroscopy experiment on the transition. The energies of rovibrational levels in the C state, spanning a wide range of v (0 ? v ? 43) and J (12 ? J ? 100) quantum numbers, are fitted to a Dunham polynomial expansion and also to a numerical potential curve constructed by the inverted perturbation approach (IPA) method.     

FTIR, XRD, SEM and solid state NMR investigations of carbonate-containing hydroxyapatite nano-particles synthesized by hydroxide-gel technique

Nano-crystalline hydroxyapatite (HA), Ca₁₀(PO₄)₆(OH)₂ has been synthesized by a precipitate conversion technique using hydroxide gel at lower temperatures, e.g. 80 °C. HA crystallizes in hexagonal structure (space group: P6₃/m) having lattice parameters: and and around 17 nm in crystallite-size for the 80 °C-heated sample. SEM micrographs show hexagonal crystallites of average particle dimensions approximately 50×20 nm for 80 °C heated sample. The structure analysis by XRD, FTIR, ¹H and ³¹P MAS NMR show the existence of structural disorder at the particle surface that either does not form hydrogen bonding due to lack of adequate bonding parameters or forms a very weak dipolar bonding. The structural disorder has been explained as a result of chemical interactions between the phosphate groups either with the surface adsorbed water or the hydroxyl groups at the surface of the nano-particles.     

Low-temperature measurements of magnetic susceptibility and specific heat of Eu2Ti2O7—An XY pyrochlore

Magnetic susceptibility obtained from magnetization measurement (for fields H=0.1 and 1.0 T) of polycrystalline Eu₂Ti₂O₇ shows two distinct features. Firstly, increases on cooling below 300 K and attains a temperature-independent constant value at 68 K (T_max). Secondly, shows an antiferromagnetic increase below 4.9±0.1 K. The former behavior is explained by crystal field (CF) theory. CF levels and wave functions of ground and excited states are determined accurately from analyses of and earlier reported Mössbauer and optical spectra. Analysis of vs. 1/T curve at low temperatures gives the classical nearest-neighbor exchange interaction J^cl=−0.76 K and a weak dipolar interaction D_nn=0.0056 K. C_P of polycrystalline sample of Eu₂Ti₂O₇ and Y₂Ti₂O₇ are measured between 1.8-35 and 1.8-120 K respectively and θ_D vs. T (K) curves are calculated. At 4 K, θ_D of Eu₂Ti₂O₇ shows a kink and dC_P/dT curve show a maximum. Optical results show energy exchange between Eu³⁺ ions at intrinsic and extrinsic (defect) sites via super-exchange interaction at low temperature which may account for the observed anomalous behavior of and C_P.     

High-resolution angle-resolved photoemission study of Ni(1 1 1) surface state

High-resolution angle-resolved photoemission spectroscopy (ARPES) has been conducted to study the Shockley state (SS) in ferromagnetic Ni(1 1 1) located at the point of the surface Brillouin zone. We have determined the Fermi wave vector and Fermi energy of the state with excitation photon energies of hν = 6.9-27.5 eV. On the basis of ARPES spectral shape analyses, we have found significant electron-electron interaction in the SS.