Synthesis of PMA stabilized silver nanoparticles by chemical reduction process under a two-step UV irradiation

Poly(methacrylic acid) (PMA) stabilized silver nanoparticles (Ag NPs), also used in the surface modification of clothing fibers, were fabricated via chemical reduction processes under UV irradiation. To obtain an uniform size distribution it has been designed a new “two-step” process which employs two different UV radiation densities in order to control the kinetics of NPs nucleation. The as produced nanoparticles were characterized by UV-vis absorption spectroscopy and TEM microscopy. The results show the reduction of the Ag ions and the nanoparticles nucleation in the first step. In the second step, the final Ag NPs size distribution is controlled through a quick cross-linking of the PMA that freezes out any further modification. A narrow size distribution with more than 80% NPs smaller than 10 nm and none larger than 25 nm was obtained and the long-term stability (one month) of the colloidal solution was verified.     

In-situ formation of silver nanoparticles stabilized by amphiphilic star-shaped copolymer and their catalytic application

Silver nanoparticles (Ag NPs) were prepared via in situ reduction of silver nitrate (AgNO₃) using polymeric micelles as nanoreactors without any additional reductant. The micelles were constructed from the amphiphilic star-shaped copolymer composed of poly(?-caprolactone) (PCL) segment, 2-(dimethylamino)ethyl methacrylate (DMAEMA or DMA) units and oligo(ethylene glycol)monomethyl ether methacrylate (OEGMA or OEG) units. The Ag NPs stabilized by those star-shaped copolymers were characterized using UV-vis spectrum, DLS, TEM and FTIR. It confirmed that PDMAEMA exhibited the reducing property unless pH was above 7. The Ag NPs were sphere-like with a diameter of 10-20 nm, which was independent of the architecture of the copolymer and AgNO₃ concentration. Furthermore, the catalytic activity of these Ag NPs was investigated by monitoring the reduction of p-nitrophenol (4-NP) by NaBH₄. The result showed that the Ag NPs formed by coordination reduction can be effectively applied in catalytic reaction.     

Excimer laser photofragmentation of metallic nanoparticles

Copper nanoparticles (Cu NPs) were prepared by different chemical methods possessing different sizes. While, silver nanoparticles (Ag NPs) were prepared by borohydride reduction method. The influences the changes in sizes of Ag NPs and Cu NPs were demonstrated by the absorption spectra. When Ag NPs and Cu NPs irradiated with 193 and 308 nm excimer laser, respectively; the maximum absorption decreased as the number of pulses increased up to 10 thousands pulse; due to the size reduction. The TEM photography gives good criteria about the size reduction process. Moreover, the mechanism of photofragmentation was described.     

1-Hexadecylamine as both reducing agent and stabilizer to synthesize Au and Ag nanoparticles and their SERS application

1-Hexadecylamine (HDA)-capped Au and Ag nanoparticles (NPs) have been successfully prepared by a one-pot solution growth method. The HDA is used as both reducing agent and stabilizer in the synthetic process is favorable for investigating the capping mechanism of Au and Ag NPs’ surface. The growth process and characterization of Au and Ag NPs are determined by Ultraviolet–visible (UV–vis) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). Experimental results demonstrate that the HDA-capped Au and Ag NPs are highly crystalline and have good optical properties. Furthermore, surface-enhanced Raman scattering (SERS) spectra of 2-thionaphthol are obtained on the Au and Ag NPs modified glass surface, respectively, indicating that the as-synthesized noble metal NPs have potentially high sensitive optical detection application.     

Silver,gold and the corresponding core shell nanoparticles: synthesis and characterization

Simple strategies for producing silver and gold nanoparticles (AgNP and AuNP) along with the corresponding core shell nanoparticles (Au–Ag and Ag–Au) by reduction of the metal salts AgBF₄ and HAuCl₄ by NaBH₄ in water will be presented. The morphologies of the obtained nanoparticles are determined by the order of addition of reactants. The obtained NPs, with sizes in the range 3–40 nm, are characterized by transmission electronic microscopy (TEM) and UV–Vis absorption spectroscopy, so as to evaluate their qualities. Moreover, a direct electrochemical detection protocol based on a cyclic voltammetry in water solution that involves the use of glassy carbon electrode is also applied to characterize the prepared NPs. The developed NPs and the related electroanalytical method seem to be with interest for future sensing and biosensing applications including DNA sensors and immunosensors.     

基于银纳米粒子的局域表面等离子体共振效应提高草甘膦基于茚三酮间接检测的灵敏度（英文）

常规的农药残留检测一般存在前处理操作复杂,耗时较长,方法不够灵敏等问题。根据氨基与茚三酮显色原理和局域表面等离子体共振(LSPR)增强光吸收原理,利用紫外-可见吸收光谱对水样品中草甘膦含量进行定量分析,并利用密度泛函理论进一步分析了显色的类似罗曼紫产物的光吸收增强机理。草甘膦与茚三酮在钼酸钠催化下反应生成类似罗曼紫产物;该物质在紫外–可见吸收光谱570nm处有最大吸收峰,当其吸附在银纳米粒子(Ag NPs)表面上时,最大吸收峰蓝移至568nm处,同时吸收强度显著提高;本研究中检出限为2.017 4×10^-11 mol·L^-1,显著低于文献中约6.5×10^-7 mol·L^-1的检出限。Gaussian 09软件计算得出,类似罗曼紫产物经由茚三酮的C=O基团垂直吸附在Ag NPs表面,静电势表明茚三酮的C=O基团优先与Ag稳定相互作用并形成Ag—O键,C=O基团和C—N基团构成了π键共轭系统;连接草甘膦和茚三酮之间的C—N键是类似罗曼紫产物的生色团。因此,茚三酮衍生法可用于间接检测水样品中草甘膦,银纳米...     

Synthesis,Morphological Control,and Properties of Silver Nanoparticles in Potential Applications

Nanostructured materials, especially nanoparticles (NPs), of noble metal NPs such as silver (Ag) have been the focus of research in recent decades because of their distinct physical, chemical, and biological properties. These materials have attracted considerable attention because of their potential applications, such as catalysis, biosensing, drug delivery, and nanodevice fabrication. Previous studies on Ag NPs have clearly demonstrated that their electromagnetic, optical, and catalytic properties are strongly influenced by their shape, size, and size distribution, which can be varied by using different synthetic methods, reducing agents, and stabilizers. The valuable optical properties of Ag NPs have allowed for new approaches in sensing and imaging applications, offering a wide range of detection modes, such as colorimetric, scattering, and surface‐enhanced Raman scattering techniques, at extremely low detection limits. Here, an overview of the various chemical, physical, and biological properties of Ag NP fabrication approaches to obtain the various shapes and sizes is presented.     

Optical,structural, and antibacterial properties of biosynthesized Ag nanoparticles at room temperature using Azadirachta indica leaf extract

We report an enhancement of antibacterial properties of Ag nanoparticles (NPs) synthesized at room temperature using leaf extract of Azadirachta indica (Neem) following green synthesis route. To study such antibacterial properties Ag NPs of sizes within 9 nm to 17 nm were synthesized by varying the concentration of Neam leaf extract (NLE). The NP size and size distribution were seen to increase and decrease, respectively, with increase in NLE concentration. Also Ag NPs having a fixed size (~26 nm) was also synthesized by varying the precursor (AgNO₃) concentration. It is noticed that concentration of NLE has significant effects on the control of NP size as well as size distribution whereas there is almost no role of precursor concentration of the NP size. All the Ag NPs are found to have face-centred-cubic crystal structure with preferential growth along (111) plane which is stable one. The peak of X-ray diffraction at ~32.4° (2θ value), which is prominent for low concentrations of NLE and precursor, is identified as (101) plane of Ag crystal. The generation and growth of Ag NPs had also been confirmed using electron microscopic studies. These Ag NPs show prominent surface plasmon resonance (SPR) absorption at ~ 420 nm confirming again the genesis of Ag NPs. The SPR peak shifts towards longer wavelength (redshift) with a corresponding reduction in full width at half maximum with increase in NP size. All of the samples containing Ag NPs show a broad blue photoluminescence (PL) emission at ~ 471 nm. Emission peak is seen to redshift with increase in NP size and is consistent with the optical absorption data. Such PL emission is argued as due to interband transition or plasmon luminescence. Being biocompatible of the green synthesis process, antibacterial properties of these Ag NPs were studies in details considering all the samples (with varied NP size for one set and with fixed NP size for other set of samples). As per our knowledge this is the first report of size related total study of Ag NPs, showing increased antibacterial effect as size decreased and equal antibacterial effect as size equals. It is found that smaller Ag NPs has enhanced antibacterial effects due to large surface area to volume ratio in comparison with bigger sized Ag NPs.     

Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm² to 3.25 mA/cm², respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.     

Facile synthesis of SERS active Ag nanoparticles in the presence of tri-n-octylphosphine sulfide

A facile and novel way was reported here for the synthesis of hydrophobic Ag nanoparticles (NPs), using AgNO₃, tri-n-octylphosphine (TOP) and sulfur (S) powder in process. TOP was used as solvent, reducing agent and stabilizer. S could chelate with excessive TOP to form trioctylphosphine sulfide (TOPS), which served as second capping agent. The hydrophobic Ag NPs could be transformed into hydrophilic state through ligand exchange. Furthermore, surface-enhanced Raman scattering (SERS) spectra of 4-aminothiophenol (4-ATP) were obtained on the hydrophobic and hydrophilic Ag NPs modified substrates, indicating that the as-synthesized Ag NPs had great potential for high sensitive optical detection applications.     

Self-assembled Ag nanoparticles for surface enhanced Raman scattering

Uniform and reproducible substrates for surface enhanced Raman scattering (SERS) are fabricated by self-assembly of Ag nanoparticles (NPs) on 3-aminopropyltrimethoxysilane (APTES) modified glass. Experimental results indicate that the Ag NPs with a narrow size distribution were assembled as a sub-monolayer which exhibits an excellent SERSactivity. The SERS enhancement factor is estimated to be 7.5 × 10⁶ and the detection limit for crystal violet (CV) solution is about ～10^?11 M. The uniformity and reproducibility of the SERS signals are tested by point-to-point and batch-to-batch measurements. It is confirmed that the self-assembled Ag NPs substrates has a high SERS reproducibility and a low standard deviation with respect to the Ag NPs on non-functionalized glass substrates. The self-assembled Ag NPs substrates can be widely used for the application of chemical and biochemical sensing.     

The Toxicity of Silver Nanoparticles Depends on Their Uptake by Cells and Thus on Their Surface Chemistry

A set of three types of silver nanoparticles (Ag NPs) are prepared, which have the same Ag cores, but different surface chemistry. Ag cores are stabilized with mercaptoundecanoic acid (MUA) or with a polymer shell [poly(isobutylene‐alt‐maleic anhydride) (PMA)]. In order to reduce cellular uptake, the polymer‐coated Ag NPs are additionally modified with polyethylene glycol (PEG). Corrosion (oxidation) of the NPs is quantified and their colloidal stability is investigated. MUA‐coated NPs have a much lower colloidal stability than PMA‐coated NPs and are largely agglomerated. All Ag NPs corrode faster in an acidic environment and thus more Ag(I) ions are released inside endosomal/lysosomal compartments. PMA coating does not reduce leaching of Ag(I) ions compared with MUA coating. PEGylation reduces NP cellular uptake and also the toxicity. PMA‐coated NPs have reduced toxicity compared with MUA‐coated NPs. All studied Ag NPs were less toxic than free Ag(I) ions. All in all, the cytotoxicity of Ag NPs is correlated on their uptake by cells and agglomeration behavior.     

On 308 nm photofragmentation of the silver nanoparticles

Silver nanoparticles (Ag NPs) were prepared by different chemical methods possessing different sizes 3 ± 2, 8 ± 2, and 20 ± 5 nm. The influence the size of Ag NPs was demonstrated by the absorption and fluorescence spectra, the maximum absorption of Ag NPs increases as the particle size increases. When Ag NPs irradiated with 308 nm excimer laser; the maximum absorption and the full width at half maximum decreased as the number of pulses increased up to 100,000 pulse; due to the size reduction. The fluorescence spectra of Ag NPs and irradiated Ag NPs with 308 nm excimer laser were recorded after excitation at 441.5 nm He-Cd laser, showing a red shift increasing as the particle size is increased.     

Silver nanoparticles generated by pulsed laser ablation in supercritical CO2 medium

Pulsed laser ablation (PLA) has been widely employed in industrial and biological applications and in other fields. The environmental conditions in which PLA is conducted are important parameters that affect both the solid particle cloud and the deposition produced by the plume. In this work, the generation of nanoparticles (NPs) has been developed by performing PLA of silver (Ag) plates in a supercritical CO₂ medium. Ag NPs were successfully generated by allowing the selective generation of clusters. Laser ablation was performed with an excitation wavelength of 532 nm under various pressures and temperatures of CO₂ medium. On the basis of the experimental result, both surface of the irradiated Ag plate and structure of Ag NPs were significantly affected by the changes in supercritical CO₂ pressure and temperature. With increasing irradiation pressure, plume deposited in the surrounding crater created by the ablation was clearly observed. In Field Emission Scanning Electron Microscopy (FE-SEM) the image of the generated Ag NPs on the silicon wafer and the morphology of Ag particles were basically a sphere-like structure. Ag particles contain NPs with large-varied diameter ranging from 5 nm to 1.2 μm. The bigger Ag NPs melted during the ablation process and then ejected smaller spherical Ag NPs, which formed nanoclusters attached on the molten Ag NPs. The smaller Ag NPs were also formed around the bigger Ag NPs. Based on the results, this new method can also be used to obtain advanced nano-structured materials.     

New surface-modified zinc oxide nanoparticles with aminotriethylene oxide chains linked by 1,2,3-triazole ring: Preparation, and visible light-emitting and noncytotoxic properties

Novel surface-modified, visible light-emitting and noncytotoxic ZnO nanoparticles (NPs) (ZPAZ) having aminotriethylene oxide chains linked by 1,4- and/or 1,5-disubstituted 1,2,3-triazole rings were prepared from ZnO NPs (ZPA) with ethynyl groups on the surfaces and an azide derivative of triethylene oxide chain linking terminal amino group (ATA) via 1,3-dipolar azide/alkyne click reaction by heating without Cu(I) catalyst. FTIR spectroscopy, elemental analysis, XRD analysis and TEM observation suggested that the resulting ZPA and ZPAZ NPs have the particle sizes below 10 nm in diameters, triethylene oxide chains linking the terminal amino groups and wurtzite crystal structure. UV-vis absorption spectrum of the ZPAZ NPs in methanol showed maximum absorption band at 346.5 nm, supporting the TEM observation. PL spectra depicted that the ZPA and ZPAZ NPs display broad light green and lightly greenish yellow visible light emitting bands in methanol. Zeta potentials measured in distilled water suggested that the ZPAZ NPs have a low tendency to aggregate and possess better stability than the ZPA NPs. Cytotoxicity assay revealed that the ZPAZ NPs, having water-dispersion properties, are noncytotoxic at low concentrations and almost all RAW264.7 cells are alive after 24 h of treatment.     

Heterogeneous nucleation and growth of silver nanoparticles on unmodified polystyrene spheres by in situ reduction

The in situ reduction growth of Ag nanoparticles (NPs) on unmodified polystyrene (PS) spheres is investigated via controlling Ag nucleation and growth rates by continuous dripping addition of reductant solution in the absence of surfactants. The sub-micro PS spheres were coated by a uniform coverage of Ag NPs with several shapes like elongated islands, spherical particles, and particle aggregates. The reaction temperature and reductant concentration are demonstrated to influence the crystal structure, distribution, and stability of the Ag NPs on the PS substrates. The heterogeneous nucleation and growth of Ag NPs on PS spheres are found to depend on the inhibition of in-solution reduction and homogeneous nucleation.     

Optical measurements of ZnS nanoparticles aqueous solution

We synthesized zinc sulfide (ZnS) nanopowders with size ranging from 2 to 100 nm by a simple, low-cost, and mass production chemical method. The nanoparticles (NPs) were characterized by X-ray powder diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and UV-vis absorption spectroscopy. Our study concerns also the change in the refractive index of deionized water in presence of ZnS nanospheres. We present experimental results on effective index variation of water dispersed ZnS NPs at different wavelengths in visible spectrum.     

绿色合成银纳米粒子及其在SERS中的应用

采用无毒、绿色的酪氨酸作为还原剂和稳定剂,在碱性条件下还原硝酸银,经60 ℃恒温水浴处理20 min,成功地合成了银纳米粒子。混合溶液颜色由淡黄色变为棕黄色直观地呈现了银纳米粒子的生成。利用紫外可见吸收光谱(UV-Vis)和透射电子显微镜(TEM)对制备样品进行分析和表征。粒子的UV-Vis吸收在412 nm附近。TEM图像显示,银纳米粒子的形状近似球形,粒子直径在15～25 nm。分别以结晶紫(CV)和叶酸(FA)为探测分子,进一步研究了该银纳米粒子的表面增强拉曼散射(SERS)效应。实验结果表明,该合成方法不仅方便、快速、绿色环保,而且合成的银纳米粒子对CV和FA分子有很好的SERS效应。     

Synthesis of nanocrystalline titania in pure water by pulsed Nd:YAG Laser

Synthesis of titania (TiO₂) nanoparticles (NPs) has been performed with pulsed laser ablation (PLA) approach by irradiating a 1064 nm Nd:YAG laser pulses on the titanium target immersed in pure water. A systematic characterization on the products, synthesized in different laser pulse energies, illustrated the conspicuous dependence of crystalline phase and size distribution of the NPs on this parameter. Emission spectroscopy of the induced plasma was exploited to justify the formation of titania NPs through the synthesis process, as well as the emergence of rutile phase beside the anatase by increasing the laser pulse energies. In addition, UV-vis optical absorption and Raman spectroscopy, associated with X-ray diffraction (XRD) were employed to quantitatively determine the crystalline phases of the products. Morphological observations by means of transmission electron microscopy (TEM), demonstrating the spherical shape of the synthesized NPs, was utilized to investigate the variation of particle size distribution with the laser pulse energy.     

Antibacterial activity of silver and zinc oxide nanoparticles produced by spark discharge in deionized water

Inorganic antibacterial agents such as metal nanoparticles (NPs) are very important in biomedical and pharmaceutical areas. There are many methods of synthesizing these NPs, but all of them have their own disadvantages. In this study, ultrasonic‐assisted spark discharge is employed to produce colloidal silver (Ag) and zinc oxide (ZnO) NPs which are stable without using any stabilizers or surfactants. Different tests such as X‐ray diffraction, field emission scanning electron microscopy, and ultraviolet–visible absorption spectroscopy are used for the characterization of the quantity and quality of these NPs, and their antibacterial activity is evaluated by the disk diffusion method and determination of the minimum inhibitory concentrations against Escherichia coli . The results show that the overall antibacterial activity of Ag NPs is higher than that of ZnO NPs.