Variable temperature FT-IR studies on hydrogen adsorption on the zeolite (Mg,Na)-Y

Variable-temperature infrared spectroscopy was used for the thermodynamic studies on the adsorption of hydrogen on the zeolite (Mg,Na)-Y. Adsorption renders the HH stretching mode infrared active, and simultaneous measurement of IR absorbance and hydrogen equilibrium pressure, over a range of temperature, allowed adsorption enthalpy and entropy to be determined. The standard adsorption enthalpy and entropy resulted to be ΔH° = −18.2(±0.8) kJ mol⁻¹ and ΔS° = −136(±10) J mol⁻¹ K⁻¹, respectively. The adsorption enthalpy is substantially higher than the hydrogen liquefaction heat, which suggests that magnesium-containing porous materials are potential candidates in the search for suitable adsorbents for reversible hydrogen storage.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.     

Variable-temperature FT-IR studies on the thermodynamics of carbon dioxide adsorption on a faujasite-type H-Y zeolite

Adsorption of carbon dioxide on a faujasite-type H-Y zeolite (Si:Al = 2.6:1) was studied by variable-temperature (200-290 K range) infrared spectroscopy. Adsorbed CO₂ molecules interact with the Brønsted acid Si(OH)Al groups located inside the zeolite supercage, bringing about a characteristic bathochromic shift of the O-H stretching mode from 3645 cm⁻¹ (free OH group) to 3540 cm⁻¹ (hydrogen-bonded CO₂ adsorption complex). Simultaneously, the asymmetric (ν₃) mode of adsorbed CO₂ is observed at 2353 cm⁻¹. From the observed variation of the integrated intensity of the 3645 and 2353 cm⁻¹ IR absorption bands upon changing temperature, corresponding values of standard adsorption enthalpy and entropy were found to be ΔH° = −28.5(±1) kJ mol⁻¹ and ΔS° = −129(±10) J mol⁻¹ K⁻¹. Comparison with the reported values of ΔH° for CO₂ adsorption on other zeolites is briefly discussed.     

Ethylene adsorption on the Pt-Cu bimetallic catalysts. Density functional theory cluster study

The adsorption of ethylene on Cu₁₂Pt₂ clusters has been studied within the density functional theory (DFT) approach to understand the high ethylene selectivity of Cu-rich Pt-Cu catalyst particles in the reaction of hydrogen-assisted 1,2-dichloroethane dechlorination. The structural parameters for Cu₁₂Pt₂ clusters with D_4h, D_2d, and C_3v symmetry have been calculated. The relative stability of the isomeric Cu₁₂Pt₂ clusters follows the order: C_3v > D_2d > D_4h. Each isomer has an active site for ethylene adsorption that consists of a single Pt atom surrounded by Cu atoms. The interaction of ethylene with the active site yields a π-C₂H₄ adsorption complex. The strongest π-C₂H₄ complex forms with the cluster of C_3v symmetry; the bonding energy, ΔE_π(C₂H₄), is −15.6 kcal mol⁻¹. The bonding energies for the π-C₂H₄ complex with Cu₁₄ and Pt₁₄ clusters are −6.5 and −18.8 kcal mol⁻¹, respectively.The addition of Pt to Cu modifies the valence spd-band of the cluster as compared to a Cu₁₄ cluster. The DOS near the Fermi level increases when C₂H₄ adsorbs on the Cu₁₂Pt₂ cluster. As well, the center of the d-band shifts toward lower binding energies. Ethylene adsorption also induces a number of states below the d-band. These states correspond to those of gas-phase C₂H₄.The vibrational frequencies of C₂H₄ adsorbed on the clusters of D_4h and C_3v symmetry have been calculated. The phonon vibrations occur below 250 cm⁻¹. The intense bands around 200 cm⁻¹ are attributed to stretching vibrations of the Pt-Cu bonds normal to the cluster surface. The stretching vibrations of the Pt-C bonds depend on the local structure of the active site: ν_s(Pt-C) = 268 cm⁻¹ and ν_as(Pt-C) = 357 cm⁻¹ for the cluster of the D_4h symmetry; ν_s(Pt-C) = 335 cm⁻¹ and ν_as(Pt-C) = 397 cm⁻¹ for the cluster of the C_3v symmetry. Bands in the range of 800-3100 cm⁻¹ are attributed to vibrations of the adsorbed C₂H₄ molecule. The signature frequencies of the π-C₂H₄ adsorption complex are the δ_s(CH₂) deformation vibration at ∼1200 cm⁻¹ and the ν(C-C) stretching vibration at ∼1500 cm⁻¹. These vibration are absent for di-σ-C₂H₄ adsorption complexes.     

Adsorption and solid phase extraction of 8-hydroxyquinoline from aqueous solutions by using natural bentonite

The nitrogen-heterocyclic compound 8-hydroxyquinoline (8HQ) is one of the components of coal tar and has a wide variety of uses in industry. Because of its toxicity for aquatic organisms and harmful effects for human health, the removal of 8HQ from aqueous solutions by adsorption onto natural bentonite was investigated in the present work. The experimental results show that the optimum pH value of 2.5 is favourable for the 8HQ adsorption. The experimental data were fitted well with the pseudo-second-order kinetic and Langmuir adsorption isotherm models at all studied temperatures. The maximum adsorption capacity obtained from the Langmuir isotherm model at 20 °C was 120.6 mg g⁻¹. The calculated thermodynamic results such as ΔG° (−24.3 kJ mol⁻¹) and ΔH° (−9.56 kJ mol⁻¹) indicate that the adsorption process is spontaneous and exothermic in nature. Solid phase extraction of 8HQ was also performed. The X-ray diffractometry (XRD), Fourier Transform Infrared (FTIR) and thermogravimetric (TG) analyses were carried out in order to confirm the 8HQ adsorption onto bentonite. According to the obtained results, natural bentonite can be a reusable and effective adsorbent for the removal of 8HQ.     

Study on the interaction of La with bovine serum albumin at molecular level

The interaction of La³⁺ to bovine serum albumin (BSA) has been investigated mainly by fluorescence spectra, UV-vis absorption spectra, and circular dichroism (CD) under simulative physiological conditions. Fluorescence data revealed that the quenching mechanism of BSA by La³⁺ was a static quenching process and the binding constant is 1.75×10⁴ L mol⁻¹ and the number of binding sites is 1 at 289 K. The thermodynamic parameters (ΔH=−20.055 kJ mol⁻¹, ΔG=−23.474 kJ mol⁻¹, and ΔS=11.831 J mol⁻¹ K⁻¹) indicate that electrostatic effect between the protein and the La³⁺ is the main binding force. In addition, UV-vis, CD, and synchronous fluorescence results showed that the addition of La³⁺ changed the conformation of BSA.     

Heat capacities of the electron acceptor 7,7,8,8-tetracyano- quinodimethane (TCNQ) and its radical-ion salt NH4(TCNQ) showing spin-Peierls transition

Heat capacities of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its radical-ion salt NH₄-TCNQ have been measured at temperatures in the 12-350 K range by adiabatic calorimetry. A λ-type heat capacity anomaly arising from a spin-Peierls (SP) transition was found at 301.3 K in NH₄-TCNQ. The enthalpy and entropy of transition are Δ_trsH=(667±7) J mol⁻¹ and Δ_trsS=(2.19±0.02) J K⁻¹ mol⁻¹, respectively. The SP transition is characterized by a cooperative coupling between the spin and the phonon systems. By assuming a uniform one-dimensional antiferromagnetic (AF) Heisenberg chains consisting of quantum spin (S=1/2) in the high-temperature phase and an alternating AF nonuniform chains in the low-temperature phase, we estimated the magnetic contribution to the entropy as Δ_trsS_mag=0.61 J K⁻¹ mol⁻¹ and the lattice contribution as Δ_trsS_lat=1.58 J K⁻¹ mol⁻¹. Although the total magnetic entropy expected for the present compound is R ln 2 (=5.76 J K⁻¹ mol⁻¹), a majority of the magnetic entropy (∼4.6 J K⁻¹ mol⁻¹) persists in the high-temperature phase as a short-range-order effect. The present thermodynamic investigation quantitatively revealed the roles played by the spin and the phonon at the SP transition. Standard thermodynamic functions of both compounds have also been determined.     

Equilibrium and kinetic modeling of adsorptive sulfur removal from gasoline by synthesized Ce-Y zeolite

In this research, the adsorption of a model sulfur compound, thiophene, from a simulated gasoline onto Ce-Y zeolite in pellet and powder forms was investigated. For this purpose, zeolite Na-Y was synthesized, and Ce-Y zeolite was prepared via solid-state ion-exchanged (SSIE) method. Adsorptive desulfurization of model gasoline was conducted in a batch reactor at ambient conditions to evaluate the equilibrium and kinetics of thiophene adsorption onto Ce-Y zeolite. The equilibrium data were fitted to Langmuire and Toth models. Pseudo-n-order and modified n-order models, LDF-base model, and intra-particle diffusion model were evaluated to fit the kinetic of the adsorption process and to determine the mechanism of it. The corresponding parameters and/or correlation coefficients of each model were reported. The LDF-base model was used also to fit the mass transfer coefficient for both powder and pellet forms of the adsorbent. The best fit estimates for the mass transfer coefficient were obtained 4 × 10⁻¹¹ m/s and k = 3.1 × 10⁻¹²[exp( − t/τ) + 1/(t + 10⁻⁴)], for powder and pellet form adsorbents, respectively.     

Binding of rare earth metal complexes with an ofloxacin derivative to bovine serum albumin and its effect on the conformation of protein

The water-soluble Pr (Ⅲ) and Nd (Ⅲ) complexes with an ofloxacin derivative have been prepared and characterized. The single-crystal X-ray diffraction showed that the Pr (III) and Nd (III) complexes have the similar molecular structure. Under physiological pH condition, the effects of [PrL(NO₃)₂(CH₃OH)](NO₃) and [NdL(NO₃)₂(CH₃OH)](NO₃) on bovine serum albumin (BSA) were examined using fluorescence spectroscopy in combination with UV-vis absorbance and circular dichroism (CD) spectra. The result reveals that the quenching mechanism of fluorescence of BSA by two complexes is a static quenching process and the number of binding sites is about 1 for both. The thermodynamic parameters (ΔH=−14.52 kJ mol⁻¹, ΔS=56.54 J mol⁻¹ K⁻¹ for [PrL(NO₃)₂(CH₃OH)](NO₃) and ΔH=−24.63 kJ mol⁻¹, ΔS=22.07 J mol⁻¹ K⁻¹ for [NdL(NO₃)₂(CH₃OH)](NO₃)) indicate that hydrophobic and electrostatic interactions are the main binding force in the complexes-BSA system. The binding average distance between complexes and BSA was obtained on the basis of Förster's theory. In addition, it was proved by the CD spectra that the BSA secondary structure was changed in the presence of complexes in an aqueous solution.     

Probing the interaction of flower-like CdSe nanostructure particles targeted to bovine serum albumin using spectroscopic techniques

The interaction between flower-like CdSe nanostructure particles (CdSe NP) and bovine serum albumin (BSA) was investigated from a spectroscopic angle under simulative physiological conditions. Under pH 7.4, CdSe NP could effectively quench the intrinsic fluorescence of BSA via static quenching. The binding constant (K_A) was 6.38, 3.27, and 1.90×10⁴ M⁻¹ at 298, 304, and 310 K, respectively and the number of binding sites was 1.20. According to the Van't Hoff equation, the thermodynamic parameters (ΔH°=−77.48 kJ mol⁻¹, ΔS°=−168.17 J mol⁻¹ K⁻¹) indicated that hydrogen bonds and van der Waals forces played a major role in stabilizing the BSA−CdSe complex. Besides, UV-vis and circular dichroism (CD) results showed that the addition of CdSe NP changed the secondary structure of BSA and led to a decrease in α-helix. These results suggested that BSA underwent substantial conformational changes induced by flower-like CdSe nanostructure particles.     

Kinetics and thermodynamics of Pb(II) adsorption onto modified spent grain from aqueous solutions

Spent grain, a main by-product of the brewing industry, is available in large quantities, but its main application has been limited to animal feeding. Nevertheless, in this study, spent grain modified with 1 M NaCl solution as a novel adsorbent has been used for the adsorption of Pb(II) in aqueous solutions. Isotherms, kinetics and thermodynamics of Pb(II) adsorption onto modified spent grain were studied. The equilibrium data were well fitted with Langmuir, Freundlich and Dubinin-Radushkevick (D-R) isotherm models. The kinetics of Pb(II) adsorption followed pseudo-second-order model, using the rate constants of pseudo-second-order model, the activation energy (E_a) of Pb(II) adsorption was determined as 12.33 kJ mol⁻¹ according to the Arrhenius equation. Various thermodynamic parameters such as ΔG^ads, ΔH^ads and ΔS^ads were also calculated. Thermodynamic results indicate that Pb(II) adsorption onto modified spent grain is a spontaneous and endothermic process. Therefore, it can be concluded that modified spent grain as a new effective adsorbent has potential for Pb(II) removal from aqueous solutions.     

Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions

The use of activated carbon obtained from Euphorbia rigida for the removal of a basic textile dye, which is methylene blue, from aqueous solutions at various contact times, pHs and temperatures was investigated. The plant material was chemically modified with H₂SO₄. The surface area of chemically modified activated carbon was 741.2 m² g⁻¹. The surface characterization of both plant- and activated carbon was undertaken using FTIR spectroscopic technique. The adsorption process attains equilibrium within 60 min. The experimental data indicated that the adsorption isotherms are well described by the Langmuir equilibrium isotherm equation and the calculated adsorption capacity of activated carbon was 114.45 mg g⁻¹ at 40° C. The adsorption kinetics of methylene blue obeys the pseudo-second-order kinetic model and also followed by the intraparticle diffusion model up to 60 min. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of adsorption. The activation energy of the system was calculated as 55.51 kJ mol⁻¹. According to these results, prepared activated carbon could be used as a low-cost adsorbent to compare with the commercial activated carbon for the removal textile dyes from textile wastewater processes.     

Intermittent temperature-programmed desorption study of perovskites used for catalytic purposes

A differential desorption technique, called intermittent temperature-programmed desorption (ITPD), was used to give new insights into the properties of La_1−xSr_xCo_0.8Fe_0.2O₃ perovskites as a contribution to improve their performances with respect to various important application fields such as catalysis, electrocatalysis and solid oxide fuel cells (SOFC). Both ITPD and interrupted TPD (carried out at different heating rates) evidenced two distinct oxygen adsorbed states, desorbing at temperatures lower than 400 °C, corresponding to less than 5% of a compact monolayer of oxide ions. The first one, for low desorption temperatures (lower than 290 °C) exhibits a heat of adsorption (ΔH) distribution from 101 to 121 kJ mol⁻¹. The second one, for higher desorption temperatures (between 290 and 400 °C) corresponds to ΔH = 146 ± 4 kJ mol⁻¹. Additionally, for temperatures higher than 400 °C, we observed a continuous desorption of oxygen species, probably originating from the sub-surface or semi-bulk, with an associated activation energy of desorption ≥175 kJ mol⁻¹.     

Study of interaction of butyl p-hydroxybenzoate with human serum albumin by molecular modeling and multi-spectroscopic method

Study of the interaction between butyl p-hydroxybenzoate (butoben) and human serum albumin (HSA) has been performed by molecular modeling and multi-spectroscopic method. The interaction mechanism was predicted through molecular modeling first, then the binding parameters were confirmed using a series of spectroscopic methods, including fluorescence spectroscopy, UV-visible absorbance spectroscopy, circular dichroism (CD) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. The thermodynamic parameters of the reaction, standard enthalpy ΔH⁰ and entropy ΔS⁰, have been calculated to be −29.52 kJ mol⁻¹ and −24.23 J mol⁻¹ K⁻¹, respectively, according to the Van’t Hoff equation, which suggests the van der Waals force and hydrogen bonds are the predominant intermolecular forces in stabilizing the butoben-HSA complex. Results obtained by spectroscopic methods are consistent with that of the molecular modeling study. In addition, alteration of secondary structure of HSA in the presence of butoben was evaluated using the data obtained from UV-visible absorbance, CD and FT-IR spectroscopies.     

Study on the interaction between methyl blue and human serum albumin by fluorescence spectrometry

The interaction of methyl blue (MB) with human serum albumin (HSA) was studied by fluorescence and absorption spectroscopy. The intrinsic fluorescence of HSA was quenched by MB, which was rationalized in terms of the static quenching mechanism. The number of binding sites and the apparent binding constants at different temperatures were obtained from the Stern-Volmer analysis of the fluorescence quenching data. The thermodynamic parameters determined by the van’t Hoff analysis of the binding constants (ΔH°=39.8 kJ mol⁻¹ and ΔS°=239 J mol⁻¹ K⁻¹) clearly indicate that binding is absolutely entropy-driven and enthalpically disfavored The efficiency of energy transfer and the distance between the donor (HSA) and the acceptor (MB) were calculated as 60% and 2.06 nm from the Förster theory of non-radiation energy transfer.     

Infrared spectra and stability of CO and H2O sorption over Ag-exchanged ZSM-5 zeolite: DFT study

The infrared spectra and stability of CO and H₂O sorption over Ag-exchanged ZSM-5 zeolite were investigated by using density function theory (DFT). The changes of NBO charge show that the electron transfers from CO molecule to the Ag⁺ cation to form an σ-bond, and it accompanies by the back donation of d-electrons from Ag⁺ cation to the CO (π*) orbital as one and two CO molecules are adsorbed on Ag-ZSM-5. The free energy changes ΔG, −5.55 kcal/mol and 6.52 kcal/mol for one and two CO molecules, illustrate that the Ag⁺(CO)₂ complex is unstable at the room temperature. The vibration frequency of C-O stretching of one CO molecule bonded to Ag⁺ ion at 2211 cm⁻¹ is in good agreement with the experimental results. The calculated C-O symmetric and antisymmetric stretching frequencies in the Ag⁺(CO)₂ complex shift to 2231 cm⁻¹ and 2205 cm⁻¹ when the second CO molecule is adsorbed. The calculated C-O stretching frequency in CO-Ag-ZSM-5-H₂O complex shifts to 2199 cm⁻¹, the symmetric and antisymmetric O-H stretching frequencies are 3390 cm⁻¹ and 3869 cm⁻¹, respectively. The Gibbs free energy change (ΔGH₂O) is −6.58 kcal/mol as a H₂O molecule is adsorbed on CO-Ag-ZSM-5 complex at 298 K. The results show that CO-Ag-ZSM-5-H₂O complex is more stable at room temperature.     

Characterization of the interaction between human lactoferrin and lomefloxacin at physiological condition: Multi-spectroscopic and modeling description

The interaction between lomefloxacin (LMF) and human lactoferrin (Hlf) was studied by using fluorescence, circular dichroism (CD) spectroscopic and molecular modeling measurements. By the fluorescence quenching results, it was found that the binding constant K_A=8.69×10⁵ L mol⁻¹, and number of binding sites n=1.75 at physiological condition. Experimental results observed showed that the binding of LMF to Hlf induced conformational changes of Hlf. The participation of tyrosyl and tryptophanyl residues of protein was also estimated in the drug-Hlf complex by synchronous fluorescence. The quantitative analysis data of far-UV CD spectra from that of the α-helix 37.4% in free Hlf to 30.2% in the LMF-Hlf complex further confirmed that secondary structure of the protein was changed by LMF. Near-UV CD showed perturbations around tryptophan and tyrosine residues which involves perturbations of tertiary structure. The thermodynamic parameters like, ΔH° and ΔS°, have been calculated to be 63.411 kJ mol⁻¹ and 231.104 J mol⁻¹ K⁻¹, respectively. Thermodynamic analysis showed that hydrophobic interactions were the main force in the binding site but the hydrogen bonding and electrostatic interaction could not be excluded which in agreement with the result of molecular docking study. The distance r between donor and acceptor was obtained according to fluorescence resonance energy transfer (FRET) and found to be 1.78 nm. The interaction between LMF and Hlf has been verified as consistent with the static quenching procedure and the quenching mechanism is related to the energy transfer. Furthermore, the study of molecular modeling that LMF could bind to the α-helixes between Pro145-Asn152 and Phe167-Gln172 regions and hydrophobic interaction was the major acting force for the binding site, which was in agreement with the thermodynamic analysis.     

Spectrofluorimetric study on the interaction between antimicrobial drug sulfamethazine and bovine serum albumin

The interaction between the antimicrobial drug sulfamethazine (STM) and bovine serum albumin (BSA) has been studied using steady state and synchronous fluorescence spectroscopy. Fluorescence emission data revealed that BSA (2×10⁻⁶ M) fluorescence was statically quenched by STM at various concentrations, which implies that STM-BSA complex has been formed. The fluorescence emission data was analyzed via applying the Stern-Volmer analysis in combination with thermodynamic investigation, where obtained results revealed that quenching is static with quenching constants of 2.371, 1.658, and 0.916×10⁵ M⁻¹ at 298, 304, and 310 K, respectively. Binding constants and number of binding sites at different temperatures were also determined by applying the Scatchard method, which in turn were used to construct the van't Hoff plot in order to estimate the enthalpy (ΔH) and entropy changes (ΔS) for the complexation process. An average of 1.00±0.17 was estimated for the number of sites of BSA, which indicated that STM binds to BSA with stoichiometric ratio of 1:1. The values that were estimated from the van't Hoff plot for ΔH and (ΔS) were −36.8 kJ mol⁻¹ and −14.9 J mol⁻¹ K⁻¹, respectively, which indicate that the STM-BSA complex is stabilized with hydrogen bonds and van der Waals interactions. Synchronous fluorescence data was obtained at Δλ of 15 and 60 nm, where obtained results confirmed that STM binds to BSA at the tryptophan residue (Trp. 213). In addition, the distance between STM and the Trp. 213 was estimated via employing the Förster's non-radiative energy-transfer theory, and was found to be 2.73 nm, which in turn indicated that STM can bind to BSA with high probability.     

Removal of nickel(II) ions from aqueous solutions using the natural clinoptilolite and preparation of nano-NiO on the exhausted clinoptilolite

The natural zeolite tuff (clinoptilolite) from a Serbian deposit has been studied as adsorbent for Ni(II) ions from aqueous solutions. Its sorption capacity at 298 K varies from 1.9 mg Ni g⁻¹ (for the initial solution concentration of 100 mg Ni dm⁻³) to 3.8 mg Ni g⁻¹ (for C₀ = 600 mg Ni dm⁻³) and it increases 3 times at 338 K. The sorption is best described by the Sips isotherm model. The sorption kinetics follows the pseudo-second-order model, the activation energies being 7.44, 5.86, 6.62 and 6.63 kJ mol⁻¹ for C₀ = 100, 200, 300 and 400 mg Ni dm⁻³, respectively. The sorption involves a film diffusion, an intra-particle diffusion, and a chemical cation-exchange between the Na⁺ ions of clinoptilolite and the Ni²⁺ ions. The sorption is endothermic (ΔH° being 37.9, 33.4, 30.0, 27.7 and 24.3 kJ mol⁻¹ for C₀ = 100, 200, 300, 400 and 600 mg Ni dm⁻³, respectively) and spontaneous in the 298-338 K temperature range. Thermal treatment of the Ni(II)-loaded clinoptilolite results in the formation of spherical nano-NiO particles of approx. 5 nm in diameter which are randomly dispersed in the clinoptilolite lattice.     

Hydrogen adsorption on rhodium: Hydride formed on the surface of thin rhodium films

H₂ interaction with thin Rh films deposited on Pyrex glass under UHV conditions has been studied by simultaneous measurement of work function changes ΔΦ and hydrogen pressure P, at selected constant temperatures: 78 and 298 K. Prior to the adsorption experiments the thin film topography was illustrated using the AFM and STM methods. The influence of hydrogen adsorption on the resistance of thin Rh film was examined in the course of an independent experiment. The number of sites accessible for adsorption on the thin Rh film surface was found determining population of oxygen adatoms within the monolayer at 78 K, when incorporation of these adspecies below the surface is negligible. It was established that at all examined temperatures hydrogen adsorption led to coverage Θ approaching 1 under equilibrium pressure below 10⁻³ Pa, increasing the work function. Under higher H₂ pressure an additional uptake of hydrogen leading to Θ ∼ 1.68 at 298 K, and to Θ ∼ 2 at 78 K is reached. On this surface at low temperatures there exist weakly bound, reversibly adsorbed, positively charged adspecies characteristic for hydrogen adsorption on transition metal hydrides. The change of thin Rh film resistance caused by hydrogen adsorption was not measurable.